A. M. Nesterenko
Research Subjects
A. M. Nesterenko has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- V. L. Pliuta3 shared publications
- G. V. Levchenko
Ukrainian Academy of Sciences
2 shared publications Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine
1 shared publicationS. O. Vorobey
1 shared publication
Latest Publications
- Open Access
- 30 June 2023
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metaloznavstvo ta obrobka metalìv
- Vol. 29 (2) , 15-23
Features of structure formation in economy alloyed chromo-manganese iron-carbon alloys for metallurgical equipment parts
Розглянуто можливість заміни поршневого евтектичного сплаву системи Al-Si-Cu АК12М2МгН, який вироблявся на ВАТ «Запорізький алюмінієвий комбінат» з первинного алюмінію, на АК12М2МгНЖ з підвищеним вмістом заліза, що дозволить розширити сировинну базу виробництва за рахунок використання брухту та відходів. Цю проблему пропонується вирішити введенням до технологічного процесу оброблення розплаву однополярним імпульсним електричним струмом при розливці за спеціально розробленими режимами. Проведено експерименти з впливу електричного струму на мікроструктуру, фазовий склад сплавів АК12М2МгН і АК12М2МгНЖ та їх механічні властивості при температурах 20 оС і 300 оС. Оброблення розплаву електричним струмом здійснено за режимами: щільність електричного струму (j) 100 - 400 А/см2, частота імпульсів (ν) 50 - 2000 Гц. Розглянуто фазовий склад сплавів. Показано, що основною залізовмісною фазою сплаву АК12М2МгН є (Fe,Mn)3Si2АІ15 (α) у вигляді розгалужених евтектичних кристалів. Голкоподібна фаза β-FeSiАІ5 практично відсутня. До складу сплаву АК12М2МгНЖ, на відміну від АК12М2МгН, входять інтерметалід β-FeSiAl5 та первинні грубі кристали фази (Fe,Mn)3Si2АІ15. Після оброблення сплавів в рідкому стані імпульсним електричним струмом за різними режимами збільшується ступінь диференціювання евтектичних складових. Зокрема, лінійний розмір евтектичних кристалів кремнію залежно від щільності та частоти електричного струму зменшується у 2- 3 рази. У сплаві АК12М2МгН утворюються первинні кристали інтерметаліду (Fe,Mn)3Si2Al15, які у перерізі мають вигляд компактних, близьких до глобулярних, кристалів. Рентгеноспектральні дослідження показали, що при однаковій кристалографічній структурі евтектичних і первинних кристалів фази (Fe,Mn)3Si2Al15, останні відрізняються більшою концентрацією в них заліза, марганцю, міді та нікелю. У складі сплаву АК12М2МгНЖ практично відсутній голкоподібний інтерметалід β-FeSiAl5, утворення якого є однією з основних причин зниження механічних властивостей. Подібно до сплаву АК12М2МгН з’являються компактні кристали первинної фази (Fe,Mn)3Si2Al15 та значна кількість фази π- FeMg3Si6Al8. Такі структурні зміни забезпечили підвищення механічних властивостей при 20 і 300 оС як сплаву АК12М2МгН, так і АК12М2МгНЖ. Найбільш високі властивості обох сплавів досягаються при j = 100 А/см2; ν = 1000 ‒ 2000 Гц. Характеристики механічних властивостей зростають від 25 % до 40 %. Структурні та фазові зміни, зумовлені обробленням розплаву АК12М2МгНЖ електричним струмом за встановленими режимами, забезпечують йому механічні властивості на рівні сплаву АК12М2МгН при дещо більш високих показниках жароміцності. Крім того, обробка розплаву електричним струмом дозволяє скоротити витрати натрієво-калієвих флюсів на 15 - 50 %, час термічної обробки за Т1 з 10-12 год. до 2-3 год.
- 30 June 2023
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metaloznavstvo ta obrobka metalìv
- Vol. 29 (2) , 15-23
Open AccessFeatures of structure formation in economy alloyed chromo-manganese iron-carbon alloys for metallurgical equipment parts
Розглянуто можливість заміни поршневого евтектичного сплаву системи Al-Si-Cu АК12М2МгН, який вироблявся на ВАТ «Запорізький алюмінієвий комбінат» з первинного алюмінію, на АК12М2МгНЖ з підвищеним вмістом заліза, що дозволить розширити сировинну базу виробництва за рахунок використання брухту та відходів. Цю проблему пропонується вирішити введенням до технологічного процесу оброблення розплаву однополярним імпульсним електричним струмом при розливці за спеціально розробленими режимами. Проведено експерименти з впливу електричного струму на мікроструктуру, фазовий склад сплавів АК12М2МгН і АК12М2МгНЖ та їх механічні властивості при температурах 20 оС і 300 оС. Оброблення розплаву електричним струмом здійснено за режимами: щільність електричного струму (j) 100 - 400 А/см2, частота імпульсів (ν) 50 - 2000 Гц. Розглянуто фазовий склад сплавів. Показано, що основною залізовмісною фазою сплаву АК12М2МгН є (Fe,Mn)3Si2АІ15 (α) у вигляді розгалужених евтектичних кристалів. Голкоподібна фаза β-FeSiАІ5 практично відсутня. До складу сплаву АК12М2МгНЖ, на відміну від АК12М2МгН, входять інтерметалід β-FeSiAl5 та первинні грубі кристали фази (Fe,Mn)3Si2АІ15. Після оброблення сплавів в рідкому стані імпульсним електричним струмом за різними режимами збільшується ступінь диференціювання евтектичних складових. Зокрема, лінійний розмір евтектичних кристалів кремнію залежно від щільності та частоти електричного струму зменшується у 2- 3 рази. У сплаві АК12М2МгН утворюються первинні кристали інтерметаліду (Fe,Mn)3Si2Al15, які у перерізі мають вигляд компактних, близьких до глобулярних, кристалів. Рентгеноспектральні дослідження показали, що при однаковій кристалографічній структурі евтектичних і первинних кристалів фази (Fe,Mn)3Si2Al15, останні відрізняються більшою концентрацією в них заліза, марганцю, міді та нікелю. У складі сплаву АК12М2МгНЖ практично відсутній голкоподібний інтерметалід β-FeSiAl5, утворення якого є однією з основних причин зниження механічних властивостей. Подібно до сплаву АК12М2МгН з’являються компактні кристали первинної фази (Fe,Mn)3Si2Al15 та значна кількість фази π- FeMg3Si6Al8. Такі структурні зміни забезпечили підвищення механічних властивостей при 20 і 300 оС як сплаву АК12М2МгН, так і АК12М2МгНЖ. Найбільш високі властивості обох сплавів досягаються при j = 100 А/см2; ν = 1000 ‒ 2000 Гц. Характеристики механічних властивостей зростають від 25 % до 40 %. Структурні та фазові зміни, зумовлені обробленням розплаву АК12М2МгНЖ електричним струмом за встановленими режимами, забезпечують йому механічні властивості на рівні сплаву АК12М2МгН при дещо більш високих показниках жароміцності. Крім того, обробка розплаву електричним струмом дозволяє скоротити витрати натрієво-калієвих флюсів на 15 - 50 %, час термічної обробки за Т1 з 10-12 год. до 2-3 год.
- Open Access
- 31 March 2023
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metaloznavstvo ta obrobka metalìv
- Vol. 29 (1) , 46-57
Структуроутворення та властивості листових конструкційних сталей при режимах ординарної та комбінованої термічної обробки з витримкою в міжкритичному інтервалі температур
The features of the structure, the nature of the distribution of alloying elements and impurities between the structural components of sheet low-alloy steels that have undergone heat treatment with exposure in the intercritical temperature interval (ICTI), the structure formation and mechanical properties of these steels after the combined regimes of heat treatment with exposure in the ICIT were investigated. The analysis of the distribution of elements among the structural components of the studied low-alloy steels allowed us to establish that during heat treatment with direct exposure in the ICTI, such elements as manganese, chromium, aluminum, vanadium, sulfur, and phosphorus are concentrated mainly in the strengthening martensitic-bainite phase, while nickel, silicon and titanium are evenly distributed between the strengthening phase and ferrite. The conducted research on the example of sheet low-alloy steel 14G2 shows that the effects of grinding of ferritic grain, peаrlitic and martensitіс (bainite) components during combined processing with exposure in ICTI can be caused by implementation at low (450-550ºС) temperatures of isothermal decomposition the mechanism of multiple nucleation of ferrite microcrystals. It was established that the combined regimes with exposure in ICTI allow, without the application of hardening and tempering operations, to achieve in sheet low-alloy steel 14G2 mechanical properties at the level of strength class 390 according to DSTU 8541:2015 with yield strength values of 422-425 МPа and with high plasticity and impact viscosity Therefore, the use of these modes in a modified form can be recommended for the creation of end-to-end energy-saving technologies of heat treatment with exposure in the ICTI of low-alloyed steel sheet in the flow of thick-sheet mills equipped with normalization units. Keywords: structure formation, intercritical temperature interval, isothermal decomposition, martensitic-bainite phase, combined regime.
- 31 March 2023
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metaloznavstvo ta obrobka metalìv
- Vol. 29 (1) , 46-57
Open AccessСтруктуроутворення та властивості листових конструкційних сталей при режимах ординарної та комбінованої термічної обробки з витримкою в міжкритичному інтервалі температур
The features of the structure, the nature of the distribution of alloying elements and impurities between the structural components of sheet low-alloy steels that have undergone heat treatment with exposure in the intercritical temperature interval (ICTI), the structure formation and mechanical properties of these steels after the combined regimes of heat treatment with exposure in the ICIT were investigated. The analysis of the distribution of elements among the structural components of the studied low-alloy steels allowed us to establish that during heat treatment with direct exposure in the ICTI, such elements as manganese, chromium, aluminum, vanadium, sulfur, and phosphorus are concentrated mainly in the strengthening martensitic-bainite phase, while nickel, silicon and titanium are evenly distributed between the strengthening phase and ferrite. The conducted research on the example of sheet low-alloy steel 14G2 shows that the effects of grinding of ferritic grain, peаrlitic and martensitіс (bainite) components during combined processing with exposure in ICTI can be caused by implementation at low (450-550ºС) temperatures of isothermal decomposition the mechanism of multiple nucleation of ferrite microcrystals. It was established that the combined regimes with exposure in ICTI allow, without the application of hardening and tempering operations, to achieve in sheet low-alloy steel 14G2 mechanical properties at the level of strength class 390 according to DSTU 8541:2015 with yield strength values of 422-425 МPа and with high plasticity and impact viscosity Therefore, the use of these modes in a modified form can be recommended for the creation of end-to-end energy-saving technologies of heat treatment with exposure in the ICTI of low-alloyed steel sheet in the flow of thick-sheet mills equipped with normalization units. Keywords: structure formation, intercritical temperature interval, isothermal decomposition, martensitic-bainite phase, combined regime.
- 1 January 2022
- Published by Institute of Ferrous Metallurgy Z.I. Nekrasova of the National Academy of Sciences of Ukraine in Fundamental and applied problems of ferrous metallurgy
- Vol. 36
Structure and properties of reinforcing rolled coils by v-alloyed dual-and multi-phase C-Mn-Si-steel
The aim of the work was to study the influence of vanadium doping on two- and multi-phase steels. The schemes of thermomechanically controlled rolling on the wire line of the sectional rolling mill 400/200 for the production of reinforcing wire with a diameter of 6.0 mm in rolls were studied. For the production of reinforcing wire, vanadium alloyed C – Mn – Si steels, which have two-phase (DP – ferritic-martensitic (bainite)) and multi-phase (MP – ferritic-martensitic (bainite) - pearlitic) microstructures, were used. During thermomechanical controlled rolling, TMCR charts were used, including TLH stacking head temperatures of 1024°C to 1063°C. It was established that the applied rolling modes ensure the formation of the MP microstructure. In this 6.0 mm wire, high tensile strength and ductility indicators were achieved in the bends(YS0.2 = 530-550 MPa; TS = 785-885 MPa; El5 = 15.0 - 29.0 %), which fully corresponded specification requirements of national standards such as ASTM A 615 (USA), JIS G 3112 (Japan) and KSD 3504 (Republic of Korea). Keywords: thermomechanical controlled rolling, wire line, reinforcing wire in bays, V-microalloyed C-Mn-Si-steel, microstructure.
- 1 January 2022
- Published by Institute of Ferrous Metallurgy Z.I. Nekrasova of the National Academy of Sciences of Ukraine in Fundamental and applied problems of ferrous metallurgy
- Vol. 36
Structure and properties of reinforcing rolled coils by v-alloyed dual-and multi-phase C-Mn-Si-steel
The aim of the work was to study the influence of vanadium doping on two- and multi-phase steels. The schemes of thermomechanically controlled rolling on the wire line of the sectional rolling mill 400/200 for the production of reinforcing wire with a diameter of 6.0 mm in rolls were studied. For the production of reinforcing wire, vanadium alloyed C – Mn – Si steels, which have two-phase (DP – ferritic-martensitic (bainite)) and multi-phase (MP – ferritic-martensitic (bainite) - pearlitic) microstructures, were used. During thermomechanical controlled rolling, TMCR charts were used, including TLH stacking head temperatures of 1024°C to 1063°C. It was established that the applied rolling modes ensure the formation of the MP microstructure. In this 6.0 mm wire, high tensile strength and ductility indicators were achieved in the bends(YS0.2 = 530-550 MPa; TS = 785-885 MPa; El5 = 15.0 - 29.0 %), which fully corresponded specification requirements of national standards such as ASTM A 615 (USA), JIS G 3112 (Japan) and KSD 3504 (Republic of Korea). Keywords: thermomechanical controlled rolling, wire line, reinforcing wire in bays, V-microalloyed C-Mn-Si-steel, microstructure.