GLG. V. Levchenko

G. V. Levchenko

*This is an algorithmically generated author record based on publicly available information.

G. V. Levchenko has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • In memory of Leonid Hryhorovych Tuboltsev

    by Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, O. Ye. Merkulov, H. V. Levchenko

    The article presents data on the life and creative activity of Leonid Grygorovich Tuboltsev, a veteran of the Iron and Steel Institute of Z. I. Nekrasov of the National Academy of Sciences of Ukraine.

  • Open Access

    Структуроутворення та властивості листових конструкційних сталей при режимах ординарної та комбінованої термічної обробки з витримкою в міжкритичному інтервалі температур

    by V. L. Plyuta, G. V. Levchenko, A. M. Nesterenko

    The features of the structure, the nature of the distribution of alloying elements and impurities between the structural components of sheet low-alloy steels that have undergone heat treatment with exposure in the intercritical temperature interval (ICTI), the structure formation and mechanical properties of these steels after the combined regimes of heat treatment with exposure in the ICIT were investigated. The analysis of the distribution of elements among the structural components of the studied low-alloy steels allowed us to establish that during heat treatment with direct exposure in the ICTI, such elements as manganese, chromium, aluminum, vanadium, sulfur, and phosphorus are concentrated mainly in the strengthening martensitic-bainite phase, while nickel, silicon and titanium are evenly distributed between the strengthening phase and ferrite. The conducted research on the example of sheet low-alloy steel 14G2 shows that the effects of grinding of ferritic grain, peаrlitic and martensitіс (bainite) components during combined processing with exposure in ICTI can be caused by implementation at low (450-550ºС) temperatures of isothermal decomposition the mechanism of multiple nucleation of ferrite microcrystals. It was established that the combined regimes with exposure in ICTI allow, without the application of hardening and tempering operations, to achieve in sheet low-alloy steel 14G2 mechanical properties at the level of strength class 390 according to DSTU 8541:2015 with yield strength values of 422-425 МPа and with high plasticity and impact viscosity Therefore, the use of these modes in a modified form can be recommended for the creation of end-to-end energy-saving technologies of heat treatment with exposure in the ICTI of low-alloyed steel sheet in the flow of thick-sheet mills equipped with normalization units. Keywords: structure formation, intercritical temperature interval, isothermal decomposition, martensitic-bainite phase, combined regime.

  • Open Access

    Peculiarities of the formation of heterogeneous structures in carbon steels

    by T. V. Balakhanova, G. V. Levchenko

    Obtaining a homogeneous structure and uniform-phase distribution is critical to a high set of mechanical and operational properties of rolled metal. However, in practice it is not always possible to create metal products with the specified characteristics. In order to determine the morphological features of the structure of rolled carbon steel, a comparative study of carbon steel samples with a carbon content of 0.49 % C and 0.2 % C selected from hot-rolled billets was carried out. The billets of each group were produced under the conditions of the same enterprise, with close temperature-time modes of deformation processing. The main difference was in manufacturing processes of the output continuous cast steel billets. This research shows that with identical normalized chemical composition of steel and the same thermomechanical treatment, the formation of the morphological structure features of hot-rolled steel occurs in a different way. Therefore, we can assume that the liquation, the diffusive mobility of elements is particularly influenced by the content of impurity elements and gases in steel, which leads to a different type of structures in the finished rolled metal. At the same time, these differences are observed in carbon steels with different carbon content. A sample of non-vacuumed OC grade axle steel (0.49 % C) from converter steelmaking has a more homogeneous structure without local areas of pearlite or ferrite accumulation. It was shown that the formation of ferrite rim in the microsegregation areas occurs not only in manganous sulfides, but also arises on the background of the smallest oxide inclusions. There is significant structural heterogeneity in the samples of electric steel, despite the lower sulfur content and gassiness of steel; at the same time, a dense perlite layer is formed around the sulfides. There is also a difference in steel grade 20 (0.2 % C) of different manufacturing processes. The structure is more homogeneous in qualitatively deoxidized vacuum degassed steel; no local areas with different dimensional characteristics were detected. The size of the structural elements is much larger and the structure has mostly large sections of the Widmanstatten ferrite. Since a large number of non-metallic inclusions and gassiness of steel is not a positive factor for providing a high set of properties of metal products, the modes of thermomechanical treatment used today require adjustments depending on the characteristics of steel melting. Keywords: microstructural heterogeneity, ferritic-pearlitic banding, mechanical properties, manganous sulfides.


  • Structure and properties of reinforcing rolled coils by v-alloyed dual-and multi-phase C-Mn-Si-steel

    by Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, V. L. Pliuta, G. V. Levchenko, S. O. Vorobey, A. M. Nesterenko

    The aim of the work was to study the influence of vanadium doping on two- and multi-phase steels. The schemes of thermomechanically controlled rolling on the wire line of the sectional rolling mill 400/200 for the production of reinforcing wire with a diameter of 6.0 mm in rolls were studied. For the production of reinforcing wire, vanadium alloyed C – Mn – Si steels, which have two-phase (DP – ferritic-martensitic (bainite)) and multi-phase (MP – ferritic-martensitic (bainite) - pearlitic) microstructures, were used. During thermomechanical controlled rolling, TMCR charts were used, including TLH stacking head temperatures of 1024°C to 1063°C. It was established that the applied rolling modes ensure the formation of the MP microstructure. In this 6.0 mm wire, high tensile strength and ductility indicators were achieved in the bends(YS0.2 = 530-550 MPa; TS = 785-885 MPa; El5 = 15.0 - 29.0 %), which fully corresponded specification requirements of national standards such as ASTM A 615 (USA), JIS G 3112 (Japan) and KSD 3504 (Republic of Korea). Keywords: thermomechanical controlled rolling, wire line, reinforcing wire in bays, V-microalloyed C-Mn-Si-steel, microstructure.

  • Scientific and technical support of the Concept of sustainable development of black metallurgy of Ukraine

    by Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, O. I. Babachenko, L. G. Tuboltsev, O. Ye. Merkulov, G. V. Levchenko

    The article examines the prospects of scientific and technical support for the development of ferrous metallurgical Ukraine, taking into account the consequences of the military aggression of the Russian Federation. On the basis of a comprehensive analysis of the current state of the industry, the possibilities of implementing modern and promising technologies of metallurgical production have been determined in accordance with the proposed project "Concept of sustainable development of ferrous metallurgy of Ukraine". Possible scenarios and stages of development of ferrous metallurgy were discussed, priority directions for the near, medium and long term were determined. It was emphasized that the development of the ferrous metallurgical and mining and metallurgical complex of Ukraine as a whole should be connected with the implementation of the best available technologies (Best Available Techniques), conducting promising scientific research and implementing systematic scientific and technical support of production. The priority areas of development of sub-sectors of the metallurgical industry are considered. Prospective ways of improving technologies for all main metallurgical processes are proposed. It was noted that along with the improvement of the process of obtaining iron in blast furnaces, it is expedient to develop off-blast production using raw materials available in Ukraine. Progress in steelmaking is, first of all, due to the improvement of modern oxygen-converter and electric steelmaking technologies. It was established that rolling production needs modernization of industrial equipment and an increase in the range of metal products. It is shown that the decarbonization of steel production should become a promising direction for the development of the metallurgical industry and one of the means of solving environmental problems. Target indicators of sustainable development and effectiveness of scientific and technical support of the metallurgical industry in the perspective of 2050 have been determined. The successful solution of the tasks and the implementation of the future development directions defined by the Concept will allow the metallurgical industry to firmly establish itself on the trajectory of sustainable growth and provide Ukraine with one of the competitive advantages in the international arena.


  • Open Access

    Influence of modes of thermal hardening and the subsequent cryogenic processing on structure and properties of steel 38Ni3CrMoV

    by S.V. Bobyr, P.V. Krot, G.V. Levchenko, O.YE. Baranovska, D.V. Loshkarev

    For the production of various machine-building products - rolling rolls, parts of power equipment, piercing mandrels - complex alloy steels containing chromium and a significant number of other deficient alloying elements (nickel, vanadium, molybdenum) type 38Ni3CrMoV are used. The paper presents the results of research on the influence of modes of hardening and subsequent cryogenic treatment on the parameters of the structure, hardness and wear resistance of this steel. Visible changes in the microstructure of thermally improved steel samples during cryogenic treatment were not found, which can be explained by the high thermodynamic stability of the sorbitol structure and the practical absence of residual austenite due to its decomposition during high tempering. It is shown that cryogenic treatment of thermally improved 38Ni3CrMoV steel contributes to an increase in the hardness, toughness and wear resistance this steel (~3.8 %). In this case, there is a slight increase in the parameter and magnitude of microstresses of the crystal lattice, an increase in the density of dislocations due to the removal of thermal stresses. To obtain a multiphase structure of 38Ni3CrMoV steel with retained austenite, isothermal quenching from the γ - α region has been proposed. The use of cryogenic treatment for the experimental mode of hardening of 38Ni3CrMoV steel samples promotes the transformation of retained austenite in the final structure of the samples into martensite with a significant increase in the microhardness of its structural components at the 22.3 %. The experimental hardening mode + cryogenic treatment provides a significant increase in the hardness and wear resistance of 38Ni3CrMoV steel at the 21.6 % while ensuring a certain level of its impact toughness (more than 4 J/cm2) and can be recommended for the implementation of the technology of differentiated hardening of large-sized products made of 38Ni3CrMoV steel. Keywords: steel, structure, hardness, wear resistance, isothermal hardening, cryogenic treatment.


  • REGULARITIES OF THE RETAINED AUSTENITE FORMATION IN THE COMPLEXLY ALLOYED STEEL (OVERVIEW)

    by S. V. Bobyr, E. V. Parusov, G. V. Levchenko, T. М. Golubenko, I. М. Chuiko

    The purpose of the analysis is to determine the modes of heat treatment that affect the quality parameters of complex alloy steels. Steels, which contain chromium and significant amounts of other alloying elements (nickel, vanadium, molybdenum, etc.) are used for the production of the different metal products, which are working in hard operating conditions: rolling rolls, power equipment parts, piercing plug, etc. Retained austenite is always present in such steels and affects the properties of the final metal products. Should be include the following factors that increase the amount of retained austenite in complexly alloy steels: thermal stabilization of the austenite; redistribution of the carbon between the α-phase and austenite during cooling in the temperature range of the intermediate or bainitic transformation or during isothermal holding slightly above the Мp point; hardening from the intercritical temperature range; changing the cooling rate; the actual content of carbon and alloying elements; changing in the austenitization temperature, isothermal holding and heating temperature during hardening. The indicated factors should be considered during determining the final parameters of the heat treatment mode to control the amount of retained austenite in complexly alloy steels. Isothermal hardening from the γ-α-area is proposed to obtain a multiphase structure of 38HN3MFA steel. Using of the cryogenic treatment for the strengthening mode of the 38HN3MFA steel promotes the transformation of retained austenite into martensite and significantly increases the microhardness of the structural components of the steel.

  • Open Access

    Production history of hexagonal tubes for nuclear waste sealed storage and transportation

    by M.Ye. Nekhaiev, Т.V. Balakhanova, H.V. Levchenko

    Production history of hexagonal tubes for nuclear waste sealed storage and transportation

  • Open Access

    Scientific and technological fundamentals of the production of highly efficient types of construction steel and wire rod

    by E.V. Parusov, G.V. Levchenko, V.A. Lutsenko, S.V. Bobyr, O.V. Parusov, I.N. Chuiko, T.N. Golubenko

    Scientific and technological fundamentals of the production of highly efficient types of construction steel and wire rod