WLWeixuan Luo

Weixuan Luo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Weixuan Luo has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Detection of Atmospheric NO2 Using Scheimpflug DIAL with a Blue External Cavity Diode Laser Source

    by Cheng Yao, Weixuan Luo, Anping Xiao, Xiqing Peng, Bin Zhang, Longlong Wang, Qiang Ling, Yan Zhou, Zuguang Guan, Daru Chen

    Nitrogen dioxide (NO2) is broadly acknowledged as one of the six key air pollutants, posing a significant threat to environmental stability and human health. The profile of atmospheric nitrogen dioxide is required for quantifying NO2 emissions from fossil fuel combustion and industry. In continuous-wave differential absorption lidar (CW-DIAL) systems, the laser sources employed are subject to the issues of varying output characteristics and poor instability. This study presents a CW-DIAL system for remote sensing of atmospheric NO2 that employs a compact grating-based external cavity diode laser (ECDL) and Scheimpflug imaging. The laser in this system utilizes a piezoelectric transducer (PZT) for precise wavelength tuning, emitting at 448.1 nm and 449.7 nm with an output power of 2.97 W and a narrow linewidth of 0.16 nm. Signal capturing was achieved through a Newtonian telescope with a diameter of 200 mm and a 45° inclined CCD image sensor, satisfying the Scheimpflug principle. A case study near road traffic was used to verify the feasibility of ECDL-DIAL, which took place from 1 October to 2 October 2023 over an industrial park. The system generates precise NO2 distribution maps with sub-50 m resolution over 3 km, updating every 10 min.


  • High-resolution wide range dual-channel scheimpflug lidar for aerosols detection

    by Weixuan Luo, Cheng Yao, Yun Bai, Xiqing Peng, Yan Zhou, Bin Zhang, Qiang Ling, Jie Shao, Zuguang Guan, Daru Chen


  • Reflective All-Fiber Integrated Sensor for Simultaneous Gas Pressure and Temperature Sensing

    by Yao Chen, Weixuan Luo, Baobao Jiao, Yaxi Yan, Qiang Ling, Haiyun Chen, Zhangwei Yu, Zuguang Guan, Daru Chen

    In the article, a novel reflective all-fiber integrated sensor for simultaneous gas pressure and temperature sensing has been proposed and demonstrated in experiment. The proposed sensor is fabricated by combining seven core fibers (SCFs), a twin-hole and dual-core fiber (THDCF), a single-mode fiber (SMF) extrinsic Fabry-Perot interferometer (FPI) and a fiber Bragg grating (FBG). The FPI section and FBG section act as a pressure and temperature sensing unit. Especially, the MZI has the effect of filtering the FPI spectrum and is more conducive to the demodulation of the FPI reflected signal. In FPI section, the two SMFs connects with a hollow core capillary (HCC) by the ultraviolet (UV) curing glue. The sensor exhibits a high pressure and temperature sensitivity of 13.10 nm/MPa and 0.20 nm/°C in the range of 0.1-1.2 MPa and 30-90 °C, respectively. The FBG works as a temperature sensor without pressure responding, is fabricated by using the UV laser-based phase mask technology in our lab. By utilizing the dual-wavelength matrix method, both gas pressure and temperature can be measured simultaneously. In sum, with the advantage of compact size, easy fabricated, low cost, high sensitivity, reflection-type and the ability of multi-parameter measurement, our sensor is more competitive in harsh environments.


  • Open Access

    An Axial Force Sensor Based on a Long-Period Fiber Grating with Dual-Peak Resonance

    by Weixuan Luo, Ying Wang, Qiang Ling, Zuguang Guan, Daru Chen, Qiong Wu

    A high-sensitivity axial force sensor with a large measurement range based on a dual-peak long-period fiber grating (LPFG) is proposed and experimentally demonstrated. Previously, the relationship between the grating period and the dual-peak wavelengths has been investigated based on the coupled-mode theory. In our experiment, the LPFG was fabricated in our laboratory by illuminating the fiber core with the aid of a 213 nm UV laser. The sensitivity of the proposed axial force sensor can reach −14.047 nm/N in the force range from 0.490 N to 4.508 N. Taking the advantages of a compact size, low cost, and large measurement range, our force sensor has more applicable abilities in harsh environments.


  • Open Access

    Highly Birefringent and Low-Loss Hollow-Core Anti-Resonant Fiber Based on a Hybrid Guidance Mechanism

    by Xu’an Liu, Weixuan Luo, Xiaogang Jiang, Bin Zhang

    A highly birefringent and low-loss hollow-core anti-resonant fiber (HC-ARF) based on a hybrid guidance mechanism is proposed and investigated by using a finite element method. The hybrid guidance mechanism is caused by the anti-resonance effect and the total internal reflection effect. The proposed HC-ARF is obtained by employing twin symmetrical and mutually tangential elliptical arc anti-resonance layers (EA-ARLs) in a conventional 8-tube HC-ARF. Because of the anti-resonance mechanism and the total internal reflection mechanism in the EA-ARL, mode coupling appears between the core mode and the cladding mode. Simulation results indicate that the proposed HC-ARF can achieve birefringence as high as 10−2 in a near-infrared range of 1400 nm to 1600 nm and a low confinement loss (CL) of 7.74 × 10−4 dB/m (9.26 × 10−4 dB/m) for x- and y-polarization components of the fundamental mode (FM) at 1550 nm. In addition, the existence of the 8-tube anti-resonance structure in the cladding significantly suppresses the CL of the x-polarization component of the FM significantly, but the impact on the CL of the y-polarization FM can be ignored, which is determined mainly by the twin EA-ARLs. Furthermore, the performance of the birefringence and CL are also investigated by changing the values of other fiber structure parameters. Our proposed structure successfully shows the ability of the hybrid guidance mechanism in the application of CL manipulation of orthogonal polarization components.


  • Open Access

    All-Solid Single-Polarization Anti-Resonant Fiber Base on Anisotropic Glass

    by Weixuan Luo, Bin Zhang, Anping Xiao, Zhiwei Duan, Qiang Ling, Yusheng Zhang, Zhangwei Yu, Zuguang Guan, Daru Chen

    A single-polarization solid-core anti-resonant fiber is proposed, and the influence of the fiber core material anisotropy of the solid-core anti-resonant fiber on polarization characteristics is investigated using the finite element method. Single-polarization guidance is achieved by using the anisotropy of optical fiber materials, which also ensures high birefringence. The numerical simulation results indicate that there are two single-polarization intervals (1210–1440 nm and 1490–1560 nm), with a maximum bandwidth of up to 230 nm, when the confinement loss difference between the two orthogonal polarizations exceeds two orders of magnitude. Specifically, when the work wavelength is 1550 nm, a polarization extinction ratio (PER) of 108 is obtained by optimizing the structure parameters. Additionally, the y-polarization fundamental mode (YPFM) can be well confined in the fiber center with a low confinement loss of 0.04 dB/m, while the x-polarization fundamental mode (XPFM) has a huge confinement loss larger than 4.65 dB/m due to the coupling with the tube mode. The proposed single-polarization solid-core anti-resonant fiber has a huge potential in applications such as laser systems, fiber-optic gyroscopes, and optical fiber communications.