Gian Gabriele Ori
Research Subjects
Gian Gabriele Ori has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Francesca Mancini
International Research School of Planetary Sciences, University, “G. D’Annunzio” of Chieti-Pescara, Pescara, Italy
3 shared publications - Francesco Salese
International Research School of Planetary Sciences Università d'Annunzio Pescara Italy
2 shared publications - Kamal Taj-Eddine
Univ. d’Annunzio
2 shared publications - Pascal Allemand
Université Claude Bernard Lyon 1, ENS Lyon, Université Jean Monnet Saint-Étienne & CNRS, Laboratoire de Géologie de Lyon, Terre Planètes Environnement, UMR 5276, 69100 Villeurbanne, France
2 shared publications Aino Kirillova
1 shared publicationAkos Keresturi
1 shared publication
Latest Publications
- Open Access
- 13 March 2026
- Published by Copernicus GmbH
Mineralogical Diversity and Crustal Composition of Selected Lunar Regions Based on M³ Hyperspectral Analysis: Implications for ISRU and Future Exploration
Characterizing lunar surface mineralogy is essential for understanding crustal evolution, magma ocean differentiation, impact excavation processes, and identifying In-Situ Resource Utilization (ISRU) targets for future exploration. This study determines the mineralogical composition and crustal stratigraphy across four geologically distinct lunar terrains using Moon Mineralogy Mapper (M³) hyperspectral data: the Aristarchus plateau (volcanically complex), Dionysius crater (a pristine impact structure), the Malapert region (ancient highlands of the South Pole), and Leibnitz R (primordial anorthositic crust).Level-2 M³ hyperspectral cubes (430-3000 nm, 140 m/pixel) [1] were processed through systematic workflows: destriping, photometric normalization, Minimum Noise Fraction (MNF) transform, Pixel Purity Index (PPI) endmember extraction, continuum removal, and Spectral Angle Mapper (SAM) classification. Spectral signatures were validated against RELAB laboratory spectra resampled to M³ resolution. Key mineral phases identified include anorthite, low-calcium pyroxene (LCP), high-calcium pyroxene (HCP), olivine, spinel-bearing assemblages, and ilmenite.Aristarchus exhibits the highest mineralogical diversity [2], with anorthositic highland material, HCP- and LCP-bearing mafic units, and localized olivine signatures. Anorthosite absorption features (1.25 µm band depth) dominate the crater floor, pyroxene signatures characterize the ejecta blanket, and olivine (1 µm band depth) appears along crater rims. This heterogeneity reflects volcanic emplacement and deep impact excavation, offering diverse oxygen-rich and iron-bearing ISRU targets.Dionysius (Mare Tranquillitatis) reveals systematic radial mineralogical zonation from HCP-dominated rim materials to LCP-enriched central exposures, indicating excavation through compositionally stratified crust. This vertical gradient constrains upper crustal HCP overlying lower crustal LCP layers [3,4], consistent with magma ocean crystallization models. Olivine and ilmenite detections suggest penetration to mafic lithologies, constraining crust-mantle differentiation.Malapert (South Pole) is predominantly anorthositic, with isolated spinel-bearing outcrops (5% band depth at 2 µm) associated with uplifted crustal blocks. These exposures constrain deep crustal composition and early magma ocean differentiation. The area's abundant anorthosite and its location near permanently shadowed regions make it a key site for oxygen extraction and the establishment of polar exploration facilities.Leibnitz R (far side) displays spectrally pure anorthositic composition, representing primordial crust formed during lunar magma ocean plagioclase flotation. Its compositional homogeneity provides a reference for early lunar differentiation and high-purity feedstock for ISRU oxygen production.This study integrates hyperspectral mineralogy with surface morphology to constrain crustal architecture and geological evolution across diverse lunar environments. The methodology establishes a replicable framework for hyperspectral analysis applicable to future mission planning, linking fundamental crustal processes to ISRU resource assessment and advancing sustainable lunar exploration strategies.References: [1] Green et al. (2011) JGR: Planets, 10.1029/2011JE003797; [2] Chevrel et al. (2009) Icarus, 10.1016/j.icarus.2008.08.005; [3] Moriarty & Pieters (2018) JGR, 10.1002/2017JE005364; [4] Wieczorek et al. (2013) Science, 10.1126/science.1231530Acknowledgement: EU HORIZON-MSCA-2023-SE-01, Grant 101183089
- 13 March 2026
- Published by Copernicus GmbH
Open AccessMineralogical Diversity and Crustal Composition of Selected Lunar Regions Based on M³ Hyperspectral Analysis: Implications for ISRU and Future Exploration
Characterizing lunar surface mineralogy is essential for understanding crustal evolution, magma ocean differentiation, impact excavation processes, and identifying In-Situ Resource Utilization (ISRU) targets for future exploration. This study determines the mineralogical composition and crustal stratigraphy across four geologically distinct lunar terrains using Moon Mineralogy Mapper (M³) hyperspectral data: the Aristarchus plateau (volcanically complex), Dionysius crater (a pristine impact structure), the Malapert region (ancient highlands of the South Pole), and Leibnitz R (primordial anorthositic crust).Level-2 M³ hyperspectral cubes (430-3000 nm, 140 m/pixel) [1] were processed through systematic workflows: destriping, photometric normalization, Minimum Noise Fraction (MNF) transform, Pixel Purity Index (PPI) endmember extraction, continuum removal, and Spectral Angle Mapper (SAM) classification. Spectral signatures were validated against RELAB laboratory spectra resampled to M³ resolution. Key mineral phases identified include anorthite, low-calcium pyroxene (LCP), high-calcium pyroxene (HCP), olivine, spinel-bearing assemblages, and ilmenite.Aristarchus exhibits the highest mineralogical diversity [2], with anorthositic highland material, HCP- and LCP-bearing mafic units, and localized olivine signatures. Anorthosite absorption features (1.25 µm band depth) dominate the crater floor, pyroxene signatures characterize the ejecta blanket, and olivine (1 µm band depth) appears along crater rims. This heterogeneity reflects volcanic emplacement and deep impact excavation, offering diverse oxygen-rich and iron-bearing ISRU targets.Dionysius (Mare Tranquillitatis) reveals systematic radial mineralogical zonation from HCP-dominated rim materials to LCP-enriched central exposures, indicating excavation through compositionally stratified crust. This vertical gradient constrains upper crustal HCP overlying lower crustal LCP layers [3,4], consistent with magma ocean crystallization models. Olivine and ilmenite detections suggest penetration to mafic lithologies, constraining crust-mantle differentiation.Malapert (South Pole) is predominantly anorthositic, with isolated spinel-bearing outcrops (5% band depth at 2 µm) associated with uplifted crustal blocks. These exposures constrain deep crustal composition and early magma ocean differentiation. The area's abundant anorthosite and its location near permanently shadowed regions make it a key site for oxygen extraction and the establishment of polar exploration facilities.Leibnitz R (far side) displays spectrally pure anorthositic composition, representing primordial crust formed during lunar magma ocean plagioclase flotation. Its compositional homogeneity provides a reference for early lunar differentiation and high-purity feedstock for ISRU oxygen production.This study integrates hyperspectral mineralogy with surface morphology to constrain crustal architecture and geological evolution across diverse lunar environments. The methodology establishes a replicable framework for hyperspectral analysis applicable to future mission planning, linking fundamental crustal processes to ISRU resource assessment and advancing sustainable lunar exploration strategies.References: [1] Green et al. (2011) JGR: Planets, 10.1029/2011JE003797; [2] Chevrel et al. (2009) Icarus, 10.1016/j.icarus.2008.08.005; [3] Moriarty & Pieters (2018) JGR, 10.1002/2017JE005364; [4] Wieczorek et al. (2013) Science, 10.1126/science.1231530Acknowledgement: EU HORIZON-MSCA-2023-SE-01, Grant 101183089
- Open Access
- 9 July 2025
- Published by Copernicus GmbH
Hyperspectral Mineral Mapping for Sustainable Lunar Exploration: Targeting ISRU Resources in Key Lunar Regions
Introduction and ObjectivesFor ISRU and sustainable lunar habitats, characterizing the mineralogical heterogeneity of candidate landing sites is critical for identifying regions of high resource potential. This study investigates four geologically diverse lunar regions—Aristarchus, Malapert, Mare Tranquillitatis, and Leibnitz Crater—using data from the Moon Mineralogy Mapper (M³) onboard Chandrayaan-1. The objective is to map mineralogical compositions relevant to resource extraction, supporting future lunar exploration strategies.Site Selection CriteriaThe four regions were selected based on their geological diversity and potential ISRU value. Key mineralogical targets include ilmenite (for oxygen production), anorthosite and plagioclase (for construction materials), and regions enriched in FeO, TiO₂, or Helium-3. Polar regions like Malapert may contain water ice in shadowed areas and offer thermal stability.Site accessibility and terrain complexity were also considered. Although precise landing constraints are mission-specific and still under active assessment, general factors such as surface roughness and illumination conditions can influence the operational feasibility of exploration. The near side supports direct Earth communication, while far side sites like Leibnitz offer long-term strategic value.Availability of high-quality M³ imagery was also essential for ensuring robust mineralogical mapping.M3 Instrument OverviewMoon Mineralogy Mapper (M³) is a high-resolution imaging spectrometer that measured reflectance in the 430-3000 nm range with 10 nm spectral resolution on 85 adjacent bands. Here, calibrated Level 2 products (NASA PDS) have been used that have gone through radiometric, photometric, and thermal corrections (Martinot et al., 2018; Mustard et al., 2011; Staid et al., 2011). Most M³ scenes were captured in global mode, with ~140 m/pixel resolution, adequate for regional-scale mineralogical analysis.Data Preprocessing and SubsettingTo ensure optimal signal quality, two destriping procedures were used: a standard destriping routine and the THOR method to remove striping vertically. Spectral and spatial subsetting was then performed to remove noise bands, black edge effects, and non-relevant pixels. Preprocessing was critical in polar regions like Malapert, where signal degradation dominates. Final datasets typically retained 83 of the initial 85 spectral bands.Hyperspectral Analysis WorkflowThe analysis process used the Spectral Hourglass methodology to derive endmembers and mineral abundance map.Dimensionality Reduction: Minimum Noise Fraction (MNF) transformation was used to reduce data dimensionality without loss of variance. Most scenes had >90% of spectral variance in the first 3–6 MNF components. Endmember Extraction: Pixel Purity Index (PPI) found spectrally pure pixels spectrally, then plotted in the N-Dimensional Visualizer. PPI iterations and thresholds were tuned for each image (~10,000 iterations, threshold ~2.5) to identify stable endmember candidates. Spectral Classification: Linear Spectral Unmixing (LSU) and Spectral Angle Mapper (SAM) were applied. LSU provides sub-pixel abundance maps, and SAM offers angular similarity-based classification, illumination-variation resistance—critical for lunar landscapes. Spectral Library Comparison: Spectra were compared with laboratory reflectance standards of the RELAB database (NASA PDS, 2020) between 540–2990 nm. Target minerals: plagioclase, Ca-pyroxenes, ilmenite, and spinel Mineral Identification CriteriaDiagnostic absorption features were identified by depth, asymmetry, and center wavelength. Continuum subtraction was used to detect key features, especially in space-weathered materials. After Suarez-Valencia et al. (2024), rigorous model selection was employed to minimize false positives.Pyroxenes show characteristic absorptions at 1000 and 2000 nm. Olivine exhibited a broad, asymmetric feature at 1000 nm. Spinel displays a prominent ~2000 nm band. Anorthosite and plagioclase exhibited low absorption near 1250 nm with high total reflectance. Troilite was characterized by flat, low-reflectance spectra with small features in the visible. Results and InterpretationThe analysis confirms the geochemical diversity and ISRU interest in each of the four regions:Aristarchus: Dominated by anorthositic highlands and central peak materials. Steep 1250 nm features in high-albedo spectra confirm plagioclase presence. Pyroxene-rich mare basalts (LCP and HCP) are present. Due to spectral overlap, the identification of spinel units remains inconclusive in this area. Detection of troilite attests to sulfur-bearing mafic lithologies.Malapert: Near the South Lunar Pole, displays pairings of highland and mafic materials. High-Ca pyroxenes and pigeonite are present. A strong 2000 nm band confirms Mg-spinel. This region shows promise for oxygen extraction and construction resource use.Mare Tranquillitatis: Includes high-Ti basalt and ilmenite-bearing units, close to the Dionysius crater. Spectral patterns suggest pyroclastic origins. Feldspathic breccias point to regolith mixing.Leibnitz Crater (Far Side): Exposes diverse terrain including high-Ti basalts, pigeonite-bearing regolith, and highland anorthosites. The diversity is consistent with crustal excavation and impact mixing. Conclusions and OutlookThis study demonstrates the capability of M3 hyperspectral data, laboratory spectra, and advanced spectral algorithms to detect and map key lunar minerals of potential interest for ISRU. Combining quantitative (LSU) and qualitative (SAM) methods enables robust mapping of mineralogical heterogeneity.The results confirm and augment the outcomes of previous missions (e.g., KAGUYA) and provide an extension of the investigation to less characterized and compositionally complex areas such as Leibnitz. Significant ISRU-related substances such as high-Ti basalts (for oxygen...
- 9 July 2025
- Published by Copernicus GmbH
Open AccessHyperspectral Mineral Mapping for Sustainable Lunar Exploration: Targeting ISRU Resources in Key Lunar Regions
Introduction and ObjectivesFor ISRU and sustainable lunar habitats, characterizing the mineralogical heterogeneity of candidate landing sites is critical for identifying regions of high resource potential. This study investigates four geologically diverse lunar regions—Aristarchus, Malapert, Mare Tranquillitatis, and Leibnitz Crater—using data from the Moon Mineralogy Mapper (M³) onboard Chandrayaan-1. The objective is to map mineralogical compositions relevant to resource extraction, supporting future lunar exploration strategies.Site Selection CriteriaThe four regions were selected based on their geological diversity and potential ISRU value. Key mineralogical targets include ilmenite (for oxygen production), anorthosite and plagioclase (for construction materials), and regions enriched in FeO, TiO₂, or Helium-3. Polar regions like Malapert may contain water ice in shadowed areas and offer thermal stability.Site accessibility and terrain complexity were also considered. Although precise landing constraints are mission-specific and still under active assessment, general factors such as surface roughness and illumination conditions can influence the operational feasibility of exploration. The near side supports direct Earth communication, while far side sites like Leibnitz offer long-term strategic value.Availability of high-quality M³ imagery was also essential for ensuring robust mineralogical mapping.M3 Instrument OverviewMoon Mineralogy Mapper (M³) is a high-resolution imaging spectrometer that measured reflectance in the 430-3000 nm range with 10 nm spectral resolution on 85 adjacent bands. Here, calibrated Level 2 products (NASA PDS) have been used that have gone through radiometric, photometric, and thermal corrections (Martinot et al., 2018; Mustard et al., 2011; Staid et al., 2011). Most M³ scenes were captured in global mode, with ~140 m/pixel resolution, adequate for regional-scale mineralogical analysis.Data Preprocessing and SubsettingTo ensure optimal signal quality, two destriping procedures were used: a standard destriping routine and the THOR method to remove striping vertically. Spectral and spatial subsetting was then performed to remove noise bands, black edge effects, and non-relevant pixels. Preprocessing was critical in polar regions like Malapert, where signal degradation dominates. Final datasets typically retained 83 of the initial 85 spectral bands.Hyperspectral Analysis WorkflowThe analysis process used the Spectral Hourglass methodology to derive endmembers and mineral abundance map.Dimensionality Reduction: Minimum Noise Fraction (MNF) transformation was used to reduce data dimensionality without loss of variance. Most scenes had >90% of spectral variance in the first 3–6 MNF components. Endmember Extraction: Pixel Purity Index (PPI) found spectrally pure pixels spectrally, then plotted in the N-Dimensional Visualizer. PPI iterations and thresholds were tuned for each image (~10,000 iterations, threshold ~2.5) to identify stable endmember candidates. Spectral Classification: Linear Spectral Unmixing (LSU) and Spectral Angle Mapper (SAM) were applied. LSU provides sub-pixel abundance maps, and SAM offers angular similarity-based classification, illumination-variation resistance—critical for lunar landscapes. Spectral Library Comparison: Spectra were compared with laboratory reflectance standards of the RELAB database (NASA PDS, 2020) between 540–2990 nm. Target minerals: plagioclase, Ca-pyroxenes, ilmenite, and spinel Mineral Identification CriteriaDiagnostic absorption features were identified by depth, asymmetry, and center wavelength. Continuum subtraction was used to detect key features, especially in space-weathered materials. After Suarez-Valencia et al. (2024), rigorous model selection was employed to minimize false positives.Pyroxenes show characteristic absorptions at 1000 and 2000 nm. Olivine exhibited a broad, asymmetric feature at 1000 nm. Spinel displays a prominent ~2000 nm band. Anorthosite and plagioclase exhibited low absorption near 1250 nm with high total reflectance. Troilite was characterized by flat, low-reflectance spectra with small features in the visible. Results and InterpretationThe analysis confirms the geochemical diversity and ISRU interest in each of the four regions:Aristarchus: Dominated by anorthositic highlands and central peak materials. Steep 1250 nm features in high-albedo spectra confirm plagioclase presence. Pyroxene-rich mare basalts (LCP and HCP) are present. Due to spectral overlap, the identification of spinel units remains inconclusive in this area. Detection of troilite attests to sulfur-bearing mafic lithologies.Malapert: Near the South Lunar Pole, displays pairings of highland and mafic materials. High-Ca pyroxenes and pigeonite are present. A strong 2000 nm band confirms Mg-spinel. This region shows promise for oxygen extraction and construction resource use.Mare Tranquillitatis: Includes high-Ti basalt and ilmenite-bearing units, close to the Dionysius crater. Spectral patterns suggest pyroclastic origins. Feldspathic breccias point to regolith mixing.Leibnitz Crater (Far Side): Exposes diverse terrain including high-Ti basalts, pigeonite-bearing regolith, and highland anorthosites. The diversity is consistent with crustal excavation and impact mixing. Conclusions and OutlookThis study demonstrates the capability of M3 hyperspectral data, laboratory spectra, and advanced spectral algorithms to detect and map key lunar minerals of potential interest for ISRU. Combining quantitative (LSU) and qualitative (SAM) methods enables robust mapping of mineralogical heterogeneity.The results confirm and augment the outcomes of previous missions (e.g., KAGUYA) and provide an extension of the investigation to less characterized and compositionally complex areas such as Leibnitz. Significant ISRU-related substances such as high-Ti basalts (for oxygen...
- Open Access
- 3 July 2024
- Published by Copernicus GmbH
FlyRadar: a penetrating and synthetic aperture radar mounted on light UAV for the exploration of Earth and planets
The FlyRadar Project involves a collaboration between various University institutions and Companies to develop and evaluate a multi-mode (penetrating and SAR) multi-frequency radar system mounted on a UAV designed for exploration on Mars and conducting surveys on Earth. This project has received funding from the European Commission under the H2020-MSCA-RISE framework. The FlyRadar project is structured based on technical, scientific, and qualification tasks. Radar characteristics have been determined based on scientific expectations. The radar is a versatile radar system that operates at multiple modes and frequencies. Specifically, it operates at a frequency of 435 MHz for short-range operations and is designed to be installed on an electric quadcopter UAV. The radar system includes SAR (Synthetic Aperture Radar) and echo sounder modes. These modes enable a wide range of applications in remote sensing exploration, particularly in the fields of geology, agronomy, subsurface artifacts, hydrology, archaeology, and more, both on Earth and other planetary environments. Compared to other radar tools like SHARAD and MARSIS, which operate at lower frequencies, the FlyRadar tool offers a higher resolution but has a lower penetration depth. This means that it can provide detailed characterization of shallower features in the crust, typically within tens of meters, with enhanced clarity. The design of the radar system takes into account various aspects, including mechanical, electrical, electronic, optical, sensor, software control, and thermal analysis. Furthermore, scientific and operational considerations are also incorporated. Additionally, an efficient data processing chain has been implemented to handle the radar data effectively. The Unmanned Aerial Vehicle (UAV) has been specifically engineered to accommodate the weight and size of the FlyRadar instrument. Both the airborne and ground components, including mechanical, electrical, electronic, and sensor systems, have been meticulously integrated, taking into account scientific and operational requirements. A comprehensive qualification program was implemented to assess the performance of each individual element as well as the entire system. FlyRadar was developed for the purpose of studying planetary surfaces, including Earth. The system can be utilized on our planet for detailed analysis using synthetic aperture data to map out archaeological sites, conduct high-resolution surveys of surfaces and the immediate subsurface. The penetration mode is capable of collecting data on the subsurface up to a few tens of meters deep, depending on the water content of the materials in the subsurface. In addition to its applications on Earth, FlyRadar aims to serve as a prototype for planetary exploration by offering surface characterization and subsurface support. It has the potential to be a valuable tool for mapping lava tunnels, identifying ice covered by debris (particularly in glacial regions), determining the thickness of regolith, and more. Mars is an ideal candidate for exploration utilizing advanced technology. The surface of Mars is covered with a diverse range of rocks, including volcanic, sedimentary, and impact rocks, which are clearly visible. Additionally, Mars boasts two permanent polar ice caps and various ice masses hidden beneath the surface in the mid-latitude region. The 3D structure of these geological formations remains largely unexplored, but can be investigated using a GPR-SAR tool. The effectiveness of Ground Penetrating Radar (GPR) has already been proven on Mars, as demonstrated. Over the past two decades, two orbital radar instruments, MARSIS on Mars Express and SHARAD on MRO, have successfully provided the first subsoil images of Mars. The RimFax instrument on the Perseverance rover has been active, delivering high-resolution images of the Jezero delta on Mars. The FlyRadar system, which will be mounted on a UAV and operate several tens of meters above the Martian surface, will provide precise and detailed data essential for future Mars sample return missions and human expeditions.
- 3 July 2024
- Published by Copernicus GmbH
Open AccessFlyRadar: a penetrating and synthetic aperture radar mounted on light UAV for the exploration of Earth and planets
The FlyRadar Project involves a collaboration between various University institutions and Companies to develop and evaluate a multi-mode (penetrating and SAR) multi-frequency radar system mounted on a UAV designed for exploration on Mars and conducting surveys on Earth. This project has received funding from the European Commission under the H2020-MSCA-RISE framework. The FlyRadar project is structured based on technical, scientific, and qualification tasks. Radar characteristics have been determined based on scientific expectations. The radar is a versatile radar system that operates at multiple modes and frequencies. Specifically, it operates at a frequency of 435 MHz for short-range operations and is designed to be installed on an electric quadcopter UAV. The radar system includes SAR (Synthetic Aperture Radar) and echo sounder modes. These modes enable a wide range of applications in remote sensing exploration, particularly in the fields of geology, agronomy, subsurface artifacts, hydrology, archaeology, and more, both on Earth and other planetary environments. Compared to other radar tools like SHARAD and MARSIS, which operate at lower frequencies, the FlyRadar tool offers a higher resolution but has a lower penetration depth. This means that it can provide detailed characterization of shallower features in the crust, typically within tens of meters, with enhanced clarity. The design of the radar system takes into account various aspects, including mechanical, electrical, electronic, optical, sensor, software control, and thermal analysis. Furthermore, scientific and operational considerations are also incorporated. Additionally, an efficient data processing chain has been implemented to handle the radar data effectively. The Unmanned Aerial Vehicle (UAV) has been specifically engineered to accommodate the weight and size of the FlyRadar instrument. Both the airborne and ground components, including mechanical, electrical, electronic, and sensor systems, have been meticulously integrated, taking into account scientific and operational requirements. A comprehensive qualification program was implemented to assess the performance of each individual element as well as the entire system. FlyRadar was developed for the purpose of studying planetary surfaces, including Earth. The system can be utilized on our planet for detailed analysis using synthetic aperture data to map out archaeological sites, conduct high-resolution surveys of surfaces and the immediate subsurface. The penetration mode is capable of collecting data on the subsurface up to a few tens of meters deep, depending on the water content of the materials in the subsurface. In addition to its applications on Earth, FlyRadar aims to serve as a prototype for planetary exploration by offering surface characterization and subsurface support. It has the potential to be a valuable tool for mapping lava tunnels, identifying ice covered by debris (particularly in glacial regions), determining the thickness of regolith, and more. Mars is an ideal candidate for exploration utilizing advanced technology. The surface of Mars is covered with a diverse range of rocks, including volcanic, sedimentary, and impact rocks, which are clearly visible. Additionally, Mars boasts two permanent polar ice caps and various ice masses hidden beneath the surface in the mid-latitude region. The 3D structure of these geological formations remains largely unexplored, but can be investigated using a GPR-SAR tool. The effectiveness of Ground Penetrating Radar (GPR) has already been proven on Mars, as demonstrated. Over the past two decades, two orbital radar instruments, MARSIS on Mars Express and SHARAD on MRO, have successfully provided the first subsoil images of Mars. The RimFax instrument on the Perseverance rover has been active, delivering high-resolution images of the Jezero delta on Mars. The FlyRadar system, which will be mounted on a UAV and operate several tens of meters above the Martian surface, will provide precise and detailed data essential for future Mars sample return missions and human expeditions.
- 28 July 2023
- Published by Springer Nature
- p. 1409-1415
Ibn Battuta Desert
- 28 July 2023
- Published by Springer Nature
- p. 751-756
Dallol Geothermal System
- 1 January 2022
- Published by Springer Nature
- p. 1-7
Dallol Geothermal System
- 1 January 2022
- Published by Springer Nature
- p. 1-9
Ibn Battuta Desert