Seungbin Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Seungbin Kim has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Kyuho Jason Lee
Yonsei University
14 shared publications - Jueun Jung
Yonsei University
9 shared publications - Hoichang Jeong
Yonsei University
7 shared publications - Bokyoung Seo
Ulsan National Institute of Science and Technology
5 shared publications - Jeongmin Shin
Department of Electrical Engineering, Ulsan National Institute of Science and Technology, Ulsan, South Korea
5 shared publications - Keonhee Park
Department of Electrical Engineering, Ulsan National Institute of Science and Technology, Ulsan, South Korea
3 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 73 (11) , 8015-8028
A 135-FPS and 0.81-mJ/frame Heterogeneous Processor for Real-Time and Energy-Efficient LiDAR Odometry and Mapping
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 73 (11) , 8015-8028
A 135-FPS and 0.81-mJ/frame Heterogeneous Processor for Real-Time and Energy-Efficient LiDAR Odometry and Mapping
- 1 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. PP (00189200) , 1-15
SERAH-CIM: Sparsity-Aware Effective Row Activation Analog-Digital Hybrid eDRAM CIM With In-Macro Multi-Row-Multi-Task Control
This article presents a sparsity-aware analog-digital hybrid embedded dynamic random access memory (eDRAM) computing-in-memory (CIM) processor for highly energy-efficient deep neural network (DNN) acceleration. Although CIM architectures execute multiplication-and-accumulation (MAC) more efficiently than von Neumann architectures, their practical energy efficiency for DNN acceleration remains limited due to several challenges. First, prior CIMs struggled to exploit massive sparsity because of their highly parallelized structures. Second, CIMs typically adopt computation in either the analog or the digital domain, facing fundamental trade-offs between analog-to-digital converter (ADC) overhead and throughput. Third, system throughput is degraded due to 1) workload imbalance among CIM macros during sparsity-aware computation caused by a random sparsity pattern, which ruins CIM macro utilization and 2)frequent refresh and weight-update operations that have plagued prior eDRAM CIMs. To address these challenges, the proposed eDRAM CIM processor introduces four key features: 1) input activation (IA) grouping convolution, which completely skips zero-weight computations by activating only the effective rows of the CIM macro, increasing the effective computation ratio by $4.59\times $ ; 2) a hybrid-CIM macro integrated with SAR-Flash ADC (SF-ADC) and reversed-MAC near-memory logic (RM-NML) for energy-efficient MAC operations in both the analog and the digital domains, improving macro efficiency by $2.39\times $ ; 3) sparsity-aware proactive scheduling (SPS) to maximize CIM macro utilization, reducing system latency by 10.4%; and 4)in-macro Multi-row-Multi-task (MRMT) control that enables concurrent refresh/update during in-memory computation, resulting in a 22.0% reduction in system latency and a $1.3\times $ increase in system energy efficiency. Fabricated in a 28 nm CMOS process, the proposed processor demonstrates high-energy efficiency across various benchmarks, outperforming previous CIM processors by $1.55\times $ and $10.37\times $ for ResNet-18 and VGGNet-16, respectively.
- 1 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. PP (00189200) , 1-15
SERAH-CIM: Sparsity-Aware Effective Row Activation Analog-Digital Hybrid eDRAM CIM With In-Macro Multi-Row-Multi-Task Control
This article presents a sparsity-aware analog-digital hybrid embedded dynamic random access memory (eDRAM) computing-in-memory (CIM) processor for highly energy-efficient deep neural network (DNN) acceleration. Although CIM architectures execute multiplication-and-accumulation (MAC) more efficiently than von Neumann architectures, their practical energy efficiency for DNN acceleration remains limited due to several challenges. First, prior CIMs struggled to exploit massive sparsity because of their highly parallelized structures. Second, CIMs typically adopt computation in either the analog or the digital domain, facing fundamental trade-offs between analog-to-digital converter (ADC) overhead and throughput. Third, system throughput is degraded due to 1) workload imbalance among CIM macros during sparsity-aware computation caused by a random sparsity pattern, which ruins CIM macro utilization and 2)frequent refresh and weight-update operations that have plagued prior eDRAM CIMs. To address these challenges, the proposed eDRAM CIM processor introduces four key features: 1) input activation (IA) grouping convolution, which completely skips zero-weight computations by activating only the effective rows of the CIM macro, increasing the effective computation ratio by $4.59\times $ ; 2) a hybrid-CIM macro integrated with SAR-Flash ADC (SF-ADC) and reversed-MAC near-memory logic (RM-NML) for energy-efficient MAC operations in both the analog and the digital domains, improving macro efficiency by $2.39\times $ ; 3) sparsity-aware proactive scheduling (SPS) to maximize CIM macro utilization, reducing system latency by 10.4%; and 4)in-macro Multi-row-Multi-task (MRMT) control that enables concurrent refresh/update during in-memory computation, resulting in a 22.0% reduction in system latency and a $1.3\times $ increase in system energy efficiency. Fabricated in a 28 nm CMOS process, the proposed processor demonstrates high-energy efficiency across various benchmarks, outperforming previous CIM processors by $1.55\times $ and $10.37\times $ for ResNet-18 and VGGNet-16, respectively.
- 31 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 34 (1) , 242-253
CINELL: An Energy-Efficient Compute-In/Near-Memory eDRAM Processor for Sparse Transformer-Based Large Language Models
Large language models (LLMs) based on transformer architecture have significantly advanced various AI applications. However, the multihead self-attention (MHSA) in a transformer requires extensive computation and memory bandwidth. Techniques such as sparse attention and attention formula reordering have been explored recently to mitigate these challenges. However, existing processors still struggle to process LLMs efficiently. To overcome these limitations, an energy-efficient compute-in/near-memory (CINM) embedded dynamic random access memory (eDRAM) processor CINELL is proposed, incorporating the following three key features: 1) an attention block fusion computation (ABFC), which maximizes data reuse in the attention map, reduces external memory access (EMA) by 85.86%, and improves hardware utilization to 86.1%; 2) a CINM architecture designed to address the imbalance between memory and computation, while the heterogeneous pipeline reduces the system latency by 77.27%; and 3) a compute-in-memory (CIM) array that supports the cross-read operation (CRO) addresses data direction conflicts, achieving a 98.44% reduction in latency, while dual-row computation (DRC) with reduced adder logic (RAL) improves energy efficiency by $1.58\times $ . Designed in 28-nm CMOS technology, the CINELL processor achieves 36.28–58.05 TOPS/W and an F1-score of 92.41% on the SQuAD 1.1v using the BigBird-large model.
- 31 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 34 (1) , 242-253
CINELL: An Energy-Efficient Compute-In/Near-Memory eDRAM Processor for Sparse Transformer-Based Large Language Models
Large language models (LLMs) based on transformer architecture have significantly advanced various AI applications. However, the multihead self-attention (MHSA) in a transformer requires extensive computation and memory bandwidth. Techniques such as sparse attention and attention formula reordering have been explored recently to mitigate these challenges. However, existing processors still struggle to process LLMs efficiently. To overcome these limitations, an energy-efficient compute-in/near-memory (CINM) embedded dynamic random access memory (eDRAM) processor CINELL is proposed, incorporating the following three key features: 1) an attention block fusion computation (ABFC), which maximizes data reuse in the attention map, reduces external memory access (EMA) by 85.86%, and improves hardware utilization to 86.1%; 2) a CINM architecture designed to address the imbalance between memory and computation, while the heterogeneous pipeline reduces the system latency by 77.27%; and 3) a compute-in-memory (CIM) array that supports the cross-read operation (CRO) addresses data direction conflicts, achieving a 98.44% reduction in latency, while dual-row computation (DRC) with reduced adder logic (RAL) improves energy efficiency by $1.58\times $ . Designed in 28-nm CMOS technology, the CINELL processor achieves 36.28–58.05 TOPS/W and an F1-score of 92.41% on the SQuAD 1.1v using the BigBird-large model.
- 28 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (6) , 3004-3017
HYTEC: Compact and Energy-Efficient Analog-Digital Hybrid CIM With Transpose Ternary eDRAM
This article presents a remarkably high-density and energy-efficient analog-digital hybrid computing-in-memory (CIM) processor for ternary neural network (TNN) acceleration, utilizing a transpose ternary embedded DRAM bitcell. The proposed CIM processor significantly improves computational robustness and energy efficiency at both the macro- and system-level through key innovations: 1) current-mode vertical analog multiplication-and-accumulation (MAC) with gate voltage biasing in bitcell, reducing MAC variation by 87% under process, voltage, and temperature (PVT) variation; 2) ternary-bit per cycle (TPC) successive approximation register (SAR) analog-to-digital converter (ADC) with a shared capacitor digital-to-analog converter (CDAC), minimizing ADC area overhead to 15% and improving ADC efficiency by $1.49\times $ ; 3) horizontal digital partial sum (Psum) logic for area- and power-efficient Psum among MACs, reducing area by 39% and power by 57% compared to conventional full adder; and 4) input channel-first tiled-convolution that substantially enhances system energy efficiency by eliminating inter-macro data transactions, decreasing the network-on-chip power overhead to 2%. Fabricated in 28 nm CMOS technology, the proposed CIM processor achieves 1.58 Mb/mm2 of cell density, attaining 478 TOPS/W and 273.48 TOPS/W of macro and system energy efficiencies, respectively, outperforming state-of-the-art CIM processors.
- 28 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (6) , 3004-3017
HYTEC: Compact and Energy-Efficient Analog-Digital Hybrid CIM With Transpose Ternary eDRAM
This article presents a remarkably high-density and energy-efficient analog-digital hybrid computing-in-memory (CIM) processor for ternary neural network (TNN) acceleration, utilizing a transpose ternary embedded DRAM bitcell. The proposed CIM processor significantly improves computational robustness and energy efficiency at both the macro- and system-level through key innovations: 1) current-mode vertical analog multiplication-and-accumulation (MAC) with gate voltage biasing in bitcell, reducing MAC variation by 87% under process, voltage, and temperature (PVT) variation; 2) ternary-bit per cycle (TPC) successive approximation register (SAR) analog-to-digital converter (ADC) with a shared capacitor digital-to-analog converter (CDAC), minimizing ADC area overhead to 15% and improving ADC efficiency by $1.49\times $ ; 3) horizontal digital partial sum (Psum) logic for area- and power-efficient Psum among MACs, reducing area by 39% and power by 57% compared to conventional full adder; and 4) input channel-first tiled-convolution that substantially enhances system energy efficiency by eliminating inter-macro data transactions, decreasing the network-on-chip power overhead to 2%. Fabricated in 28 nm CMOS technology, the proposed CIM processor achieves 1.58 Mb/mm2 of cell density, attaining 478 TOPS/W and 273.48 TOPS/W of macro and system energy efficiencies, respectively, outperforming state-of-the-art CIM processors.
- 3 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 73 (2) , 862-874
A Multibit ReRAM Computing-in-Memory Processor With Adaptive Decision Level Nonlinear ADC for Ultra-Low-Energy Keyword Spotting in Mobile Devices
This paper presents an ultra-low-energy keyword spotting (KWS) processor based on the charge-mode multi-level resistive random-access memory (ReRAM) bitcell and adaptive analog-to-digital converter (ADC) quantization. Previous ReRAM computing-in-memory (CIM) architectures have suffered several challenges, including excessive computing energy due to direct current branches, computation non-linearity, and throughput degradation resulting from analog-to-digital conversion. The proposed processor addresses these challenges by introducing a charge-mode multi-bit ReRAM bitcell (CRB), which achieves a 61.39% reduction in multiply-and-accumulate (MAC) energy. The CRB also enhances MAC linearity by$1.65\times $ . Additionally, the 5-bit additive powers-of-two ADC achieves a 65.42% reduction in analog-to-digital conversion energy, an 11.70 percentage points decrease in ADC accuracy loss, and a$1.33\times $ increase in conversion throughput. Furthermore, the pipelined layer fusion clusters reduce intermediate data movement energy to 97.2 nJ and enhance KWS system throughput by$1.35\times $ . The proposed processor is designed utilizing 45 nm CMOS technology and compatible ReRAM devices. The processor occupies an area of 0.94 mm2 with a 68.5 KB ReRAM cell. The processor also achieves$0.74~\mu $ J/decision energy consumption, 22.59 TOPS/W energy efficiency, and 92.7% accuracy on the Google Speech Commands Dataset.- 3 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 73 (2) , 862-874
A Multibit ReRAM Computing-in-Memory Processor With Adaptive Decision Level Nonlinear ADC for Ultra-Low-Energy Keyword Spotting in Mobile Devices
This paper presents an ultra-low-energy keyword spotting (KWS) processor based on the charge-mode multi-level resistive random-access memory (ReRAM) bitcell and adaptive analog-to-digital converter (ADC) quantization. Previous ReRAM computing-in-memory (CIM) architectures have suffered several challenges, including excessive computing energy due to direct current branches, computation non-linearity, and throughput degradation resulting from analog-to-digital conversion. The proposed processor addresses these challenges by introducing a charge-mode multi-bit ReRAM bitcell (CRB), which achieves a 61.39% reduction in multiply-and-accumulate (MAC) energy. The CRB also enhances MAC linearity by$1.65\times $ . Additionally, the 5-bit additive powers-of-two ADC achieves a 65.42% reduction in analog-to-digital conversion energy, an 11.70 percentage points decrease in ADC accuracy loss, and a$1.33\times $ increase in conversion throughput. Furthermore, the pipelined layer fusion clusters reduce intermediate data movement energy to 97.2 nJ and enhance KWS system throughput by$1.35\times $ . The proposed processor is designed utilizing 45 nm CMOS technology and compatible ReRAM devices. The processor occupies an area of 0.94 mm2 with a 68.5 KB ReRAM cell. The processor also achieves$0.74~\mu $ J/decision energy consumption, 22.59 TOPS/W energy efficiency, and 92.7% accuracy on the Google Speech Commands Dataset.- 10 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (7) , 3286-3297
C 2 IM-NN: A Low-Power 3D Point Clouds Matching Processor With 1D-CNN Prediction and CAM-Based In-Memory k-NN Searching
This paper presents a content addressable memory (CAM)-based computing-in-memory (C $^{2}$ IM) system designed for energy-efficient k-nearest neighbor (k-NN) searching in 3D point clouds. For autonomous driving applications, an essential process for perceiving the mobile robot’s movements in 3D space is k-NN searching. Especially with the limited hardware resources of mobile processors, the 3D point cloud is too large to upload onto the chip, leading to $O(N^{2})$ of external memory accesses and distance calculations. The proposed C $^{2}$ IM processor enhances energy efficiency and reduces power consumption through three key features: 1) Dilated 1D-CNN prediction enables voxel-based partitioning, reducing the external memory accesses from $O(N^{2})$ to $O(N)$ ; 2) Vertex clustering reorganizes groups of points into evenly distributed clusters based on the underlying data distribution and reduces the number of points of comparisons by 49.8%; and 3) In-memory k-NN searching with CAM achieves high system energy efficiency while minimizing data transactions between memory and computation logic. Designed with 28 nm CMOS technology, the proposed C $^{2}$ IM achieves up to 23.08 $\times$ energy efficiency, and 48.4% reduction in memory footprint compared to previous ASIC accelerators, and a 99.51% reduction in power consumption compared to state-of-the-art processor implemented in FPGA with high-bandwidth memory.
- 10 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (7) , 3286-3297
C 2 IM-NN: A Low-Power 3D Point Clouds Matching Processor With 1D-CNN Prediction and CAM-Based In-Memory k-NN Searching
This paper presents a content addressable memory (CAM)-based computing-in-memory (C $^{2}$ IM) system designed for energy-efficient k-nearest neighbor (k-NN) searching in 3D point clouds. For autonomous driving applications, an essential process for perceiving the mobile robot’s movements in 3D space is k-NN searching. Especially with the limited hardware resources of mobile processors, the 3D point cloud is too large to upload onto the chip, leading to $O(N^{2})$ of external memory accesses and distance calculations. The proposed C $^{2}$ IM processor enhances energy efficiency and reduces power consumption through three key features: 1) Dilated 1D-CNN prediction enables voxel-based partitioning, reducing the external memory accesses from $O(N^{2})$ to $O(N)$ ; 2) Vertex clustering reorganizes groups of points into evenly distributed clusters based on the underlying data distribution and reduces the number of points of comparisons by 49.8%; and 3) In-memory k-NN searching with CAM achieves high system energy efficiency while minimizing data transactions between memory and computation logic. Designed with 28 nm CMOS technology, the proposed C $^{2}$ IM achieves up to 23.08 $\times$ energy efficiency, and 48.4% reduction in memory footprint compared to previous ASIC accelerators, and a 99.51% reduction in power consumption compared to state-of-the-art processor implemented in FPGA with high-bandwidth memory.
- 21 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Micro
- Vol. 45 (2) , 67-77
A Mobile Semantic Lidar SLAM Processor With Artificial-Intelligence-Based 3-D Perception and Spatiotemporal-Aware Computing
A low-power artificial intelligence (AI)-based semantic LiDAR SLAM processor is proposed to expand autonomous driving into emerging mobile robots. It combines point neural network (PNN)-based 3D segmentation with LiDAR SLAM to minimize pose errors due to the lack of perception in previous SLAM. The proposed processor is designed with a heterogeneous multi-core architecture utilizing SIMD and reconfigurable processing elements to fully support the three main operations: k-nearest neighbor (kNN); PNN; and non-linear optimization. It accelerates kNN operations with spherical bin partitioning optimized for the distribution of LiDAR data to eliminate unnecessary search spaces. In addition, the proposed spatio-temporal-aware computing minimizes excessive memory overhead and workload imbalance in kNN and PNN operations. Consequently, fabricated with 28-nm CMOS technology, the processor achieves 8.245 mJ/frame of energy consumption and a maximum performance of 20.7 ms latency, successfully demonstrating real-time semantic LiDAR SLAM system with 99.86% lower power consumption compared to modern CPU+GPU platforms.
- 21 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Micro
- Vol. 45 (2) , 67-77
A Mobile Semantic Lidar SLAM Processor With Artificial-Intelligence-Based 3-D Perception and Spatiotemporal-Aware Computing
A low-power artificial intelligence (AI)-based semantic LiDAR SLAM processor is proposed to expand autonomous driving into emerging mobile robots. It combines point neural network (PNN)-based 3D segmentation with LiDAR SLAM to minimize pose errors due to the lack of perception in previous SLAM. The proposed processor is designed with a heterogeneous multi-core architecture utilizing SIMD and reconfigurable processing elements to fully support the three main operations: k-nearest neighbor (kNN); PNN; and non-linear optimization. It accelerates kNN operations with spherical bin partitioning optimized for the distribution of LiDAR data to eliminate unnecessary search spaces. In addition, the proposed spatio-temporal-aware computing minimizes excessive memory overhead and workload imbalance in kNN and PNN operations. Consequently, fabricated with 28-nm CMOS technology, the processor achieves 8.245 mJ/frame of energy consumption and a maximum performance of 20.7 ms latency, successfully demonstrating real-time semantic LiDAR SLAM system with 99.86% lower power consumption compared to modern CPU+GPU platforms.
- 24 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (1) , 25-35
A 701.7 TOPS/W Compute-in-Memory Processor With Time-Domain Computing for Spiking Neural Network
Artificial neural networks have led to a higher computational burden, complicating inference tasks on low-power edge devices. Spiking neural network (SNN), which leverages sparse spikes for computation and data transmission, is an effective energy-efficient computing technique. However, the length of spike sequences in SNN varies significantly depending on the input coding method, among which rate coding still results in substantial data movement. A highly energy-efficient SNN accelerator with a time-domain CIM processor is proposed with three key features: 1) time-domain bitcell array for high linearity with lower energy, reducing 58.6% power consumption compared to inverter-chain architecture, 2) time-domain multi-bit accumulate for assisting multi-bit weights without analog-to-digital converter, achieving 47.2% energy reduction of domain-conversion energy, 3) analog precision reconstruction unit for supporting phase coding. The proposed TS-CIM is designed in 65 nm CMOS technology and achieves 701.7 TOPS/W energy efficiency, marking a 1.58 $\times$ enhancement compared to the state-of-the-art SNN CIM.
- 24 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (1) , 25-35
A 701.7 TOPS/W Compute-in-Memory Processor With Time-Domain Computing for Spiking Neural Network
Artificial neural networks have led to a higher computational burden, complicating inference tasks on low-power edge devices. Spiking neural network (SNN), which leverages sparse spikes for computation and data transmission, is an effective energy-efficient computing technique. However, the length of spike sequences in SNN varies significantly depending on the input coding method, among which rate coding still results in substantial data movement. A highly energy-efficient SNN accelerator with a time-domain CIM processor is proposed with three key features: 1) time-domain bitcell array for high linearity with lower energy, reducing 58.6% power consumption compared to inverter-chain architecture, 2) time-domain multi-bit accumulate for assisting multi-bit weights without analog-to-digital converter, achieving 47.2% energy reduction of domain-conversion energy, 3) analog precision reconstruction unit for supporting phase coding. The proposed TS-CIM is designed in 65 nm CMOS technology and achieves 701.7 TOPS/W energy efficiency, marking a 1.58 $\times$ enhancement compared to the state-of-the-art SNN CIM.