Jeongmin Shin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jeongmin Shin has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Kyuho Jason Lee
Yonsei University
5 shared publications - Seungbin Kim
Ulsan National Institute of Science and Technology
5 shared publications - Hoichang Jeong
Yonsei University
3 shared publications - Sangho Lee
Graduate School of Artificial Intelligence, Ulsan National Institute of Science and Technology, Ulsan, South Korea
3 shared publications - Bokyoung Seo
Ulsan National Institute of Science and Technology
2 shared publications - Donghyeon Han
Department of Electrical Engineering and Computer Science, Massachusetts Institute of Technology (MIT), Cambridge, MA, USA
2 shared publications
Latest Publications
- 28 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (6) , 3004-3017
HYTEC: Compact and Energy-Efficient Analog-Digital Hybrid CIM With Transpose Ternary eDRAM
This article presents a remarkably high-density and energy-efficient analog-digital hybrid computing-in-memory (CIM) processor for ternary neural network (TNN) acceleration, utilizing a transpose ternary embedded DRAM bitcell. The proposed CIM processor significantly improves computational robustness and energy efficiency at both the macro- and system-level through key innovations: 1) current-mode vertical analog multiplication-and-accumulation (MAC) with gate voltage biasing in bitcell, reducing MAC variation by 87% under process, voltage, and temperature (PVT) variation; 2) ternary-bit per cycle (TPC) successive approximation register (SAR) analog-to-digital converter (ADC) with a shared capacitor digital-to-analog converter (CDAC), minimizing ADC area overhead to 15% and improving ADC efficiency by $1.49\times $ ; 3) horizontal digital partial sum (Psum) logic for area- and power-efficient Psum among MACs, reducing area by 39% and power by 57% compared to conventional full adder; and 4) input channel-first tiled-convolution that substantially enhances system energy efficiency by eliminating inter-macro data transactions, decreasing the network-on-chip power overhead to 2%. Fabricated in 28 nm CMOS technology, the proposed CIM processor achieves 1.58 Mb/mm2 of cell density, attaining 478 TOPS/W and 273.48 TOPS/W of macro and system energy efficiencies, respectively, outperforming state-of-the-art CIM processors.
- 28 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (6) , 3004-3017
HYTEC: Compact and Energy-Efficient Analog-Digital Hybrid CIM With Transpose Ternary eDRAM
This article presents a remarkably high-density and energy-efficient analog-digital hybrid computing-in-memory (CIM) processor for ternary neural network (TNN) acceleration, utilizing a transpose ternary embedded DRAM bitcell. The proposed CIM processor significantly improves computational robustness and energy efficiency at both the macro- and system-level through key innovations: 1) current-mode vertical analog multiplication-and-accumulation (MAC) with gate voltage biasing in bitcell, reducing MAC variation by 87% under process, voltage, and temperature (PVT) variation; 2) ternary-bit per cycle (TPC) successive approximation register (SAR) analog-to-digital converter (ADC) with a shared capacitor digital-to-analog converter (CDAC), minimizing ADC area overhead to 15% and improving ADC efficiency by $1.49\times $ ; 3) horizontal digital partial sum (Psum) logic for area- and power-efficient Psum among MACs, reducing area by 39% and power by 57% compared to conventional full adder; and 4) input channel-first tiled-convolution that substantially enhances system energy efficiency by eliminating inter-macro data transactions, decreasing the network-on-chip power overhead to 2%. Fabricated in 28 nm CMOS technology, the proposed CIM processor achieves 1.58 Mb/mm2 of cell density, attaining 478 TOPS/W and 273.48 TOPS/W of macro and system energy efficiencies, respectively, outperforming state-of-the-art CIM processors.
- 10 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (7) , 3286-3297
C 2 IM-NN: A Low-Power 3D Point Clouds Matching Processor With 1D-CNN Prediction and CAM-Based In-Memory k-NN Searching
This paper presents a content addressable memory (CAM)-based computing-in-memory (C $^{2}$ IM) system designed for energy-efficient k-nearest neighbor (k-NN) searching in 3D point clouds. For autonomous driving applications, an essential process for perceiving the mobile robot’s movements in 3D space is k-NN searching. Especially with the limited hardware resources of mobile processors, the 3D point cloud is too large to upload onto the chip, leading to $O(N^{2})$ of external memory accesses and distance calculations. The proposed C $^{2}$ IM processor enhances energy efficiency and reduces power consumption through three key features: 1) Dilated 1D-CNN prediction enables voxel-based partitioning, reducing the external memory accesses from $O(N^{2})$ to $O(N)$ ; 2) Vertex clustering reorganizes groups of points into evenly distributed clusters based on the underlying data distribution and reduces the number of points of comparisons by 49.8%; and 3) In-memory k-NN searching with CAM achieves high system energy efficiency while minimizing data transactions between memory and computation logic. Designed with 28 nm CMOS technology, the proposed C $^{2}$ IM achieves up to 23.08 $\times$ energy efficiency, and 48.4% reduction in memory footprint compared to previous ASIC accelerators, and a 99.51% reduction in power consumption compared to state-of-the-art processor implemented in FPGA with high-bandwidth memory.
- 10 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (7) , 3286-3297
C 2 IM-NN: A Low-Power 3D Point Clouds Matching Processor With 1D-CNN Prediction and CAM-Based In-Memory k-NN Searching
This paper presents a content addressable memory (CAM)-based computing-in-memory (C $^{2}$ IM) system designed for energy-efficient k-nearest neighbor (k-NN) searching in 3D point clouds. For autonomous driving applications, an essential process for perceiving the mobile robot’s movements in 3D space is k-NN searching. Especially with the limited hardware resources of mobile processors, the 3D point cloud is too large to upload onto the chip, leading to $O(N^{2})$ of external memory accesses and distance calculations. The proposed C $^{2}$ IM processor enhances energy efficiency and reduces power consumption through three key features: 1) Dilated 1D-CNN prediction enables voxel-based partitioning, reducing the external memory accesses from $O(N^{2})$ to $O(N)$ ; 2) Vertex clustering reorganizes groups of points into evenly distributed clusters based on the underlying data distribution and reduces the number of points of comparisons by 49.8%; and 3) In-memory k-NN searching with CAM achieves high system energy efficiency while minimizing data transactions between memory and computation logic. Designed with 28 nm CMOS technology, the proposed C $^{2}$ IM achieves up to 23.08 $\times$ energy efficiency, and 48.4% reduction in memory footprint compared to previous ASIC accelerators, and a 99.51% reduction in power consumption compared to state-of-the-art processor implemented in FPGA with high-bandwidth memory.
- 21 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Micro
- Vol. 45 (2) , 67-77
A Mobile Semantic Lidar SLAM Processor With Artificial-Intelligence-Based 3-D Perception and Spatiotemporal-Aware Computing
A low-power artificial intelligence (AI)-based semantic LiDAR SLAM processor is proposed to expand autonomous driving into emerging mobile robots. It combines point neural network (PNN)-based 3D segmentation with LiDAR SLAM to minimize pose errors due to the lack of perception in previous SLAM. The proposed processor is designed with a heterogeneous multi-core architecture utilizing SIMD and reconfigurable processing elements to fully support the three main operations: k-nearest neighbor (kNN); PNN; and non-linear optimization. It accelerates kNN operations with spherical bin partitioning optimized for the distribution of LiDAR data to eliminate unnecessary search spaces. In addition, the proposed spatio-temporal-aware computing minimizes excessive memory overhead and workload imbalance in kNN and PNN operations. Consequently, fabricated with 28-nm CMOS technology, the processor achieves 8.245 mJ/frame of energy consumption and a maximum performance of 20.7 ms latency, successfully demonstrating real-time semantic LiDAR SLAM system with 99.86% lower power consumption compared to modern CPU+GPU platforms.
- 21 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Micro
- Vol. 45 (2) , 67-77
A Mobile Semantic Lidar SLAM Processor With Artificial-Intelligence-Based 3-D Perception and Spatiotemporal-Aware Computing
A low-power artificial intelligence (AI)-based semantic LiDAR SLAM processor is proposed to expand autonomous driving into emerging mobile robots. It combines point neural network (PNN)-based 3D segmentation with LiDAR SLAM to minimize pose errors due to the lack of perception in previous SLAM. The proposed processor is designed with a heterogeneous multi-core architecture utilizing SIMD and reconfigurable processing elements to fully support the three main operations: k-nearest neighbor (kNN); PNN; and non-linear optimization. It accelerates kNN operations with spherical bin partitioning optimized for the distribution of LiDAR data to eliminate unnecessary search spaces. In addition, the proposed spatio-temporal-aware computing minimizes excessive memory overhead and workload imbalance in kNN and PNN operations. Consequently, fabricated with 28-nm CMOS technology, the processor achieves 8.245 mJ/frame of energy consumption and a maximum performance of 20.7 ms latency, successfully demonstrating real-time semantic LiDAR SLAM system with 99.86% lower power consumption compared to modern CPU+GPU platforms.
- 24 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (1) , 25-35
A 701.7 TOPS/W Compute-in-Memory Processor With Time-Domain Computing for Spiking Neural Network
Artificial neural networks have led to a higher computational burden, complicating inference tasks on low-power edge devices. Spiking neural network (SNN), which leverages sparse spikes for computation and data transmission, is an effective energy-efficient computing technique. However, the length of spike sequences in SNN varies significantly depending on the input coding method, among which rate coding still results in substantial data movement. A highly energy-efficient SNN accelerator with a time-domain CIM processor is proposed with three key features: 1) time-domain bitcell array for high linearity with lower energy, reducing 58.6% power consumption compared to inverter-chain architecture, 2) time-domain multi-bit accumulate for assisting multi-bit weights without analog-to-digital converter, achieving 47.2% energy reduction of domain-conversion energy, 3) analog precision reconstruction unit for supporting phase coding. The proposed TS-CIM is designed in 65 nm CMOS technology and achieves 701.7 TOPS/W energy efficiency, marking a 1.58 $\times$ enhancement compared to the state-of-the-art SNN CIM.
- 24 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (1) , 25-35
A 701.7 TOPS/W Compute-in-Memory Processor With Time-Domain Computing for Spiking Neural Network
Artificial neural networks have led to a higher computational burden, complicating inference tasks on low-power edge devices. Spiking neural network (SNN), which leverages sparse spikes for computation and data transmission, is an effective energy-efficient computing technique. However, the length of spike sequences in SNN varies significantly depending on the input coding method, among which rate coding still results in substantial data movement. A highly energy-efficient SNN accelerator with a time-domain CIM processor is proposed with three key features: 1) time-domain bitcell array for high linearity with lower energy, reducing 58.6% power consumption compared to inverter-chain architecture, 2) time-domain multi-bit accumulate for assisting multi-bit weights without analog-to-digital converter, achieving 47.2% energy reduction of domain-conversion energy, 3) analog precision reconstruction unit for supporting phase coding. The proposed TS-CIM is designed in 65 nm CMOS technology and achieves 701.7 TOPS/W energy efficiency, marking a 1.58 $\times$ enhancement compared to the state-of-the-art SNN CIM.
- 6 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (1) , 112-124
An Energy-Efficient Processor for Real-Time Semantic LiDAR SLAM in Mobile Robots
Emerging mobile robots require simultaneous localization and mapping (SLAM) systems with advanced 3-D perception and long-range 360 $^{\circ}$ interaction for autonomous driving. However, previous SLAM processors, which targeted only camera-based visual SLAM, are unsuitable for autonomous driving systems due to their limited field of view (FoV), inaccurate depth estimation, and lack of perception. In contrast, LiDAR offers a long-range 3-D point cloud with precise depth information and 360 $^{\circ}$ FoV, enabling the capture of fine environmental details. With its high accuracy and environmental robustness, LiDAR SLAM with accurate 3-D perception, semantic LiDAR SLAM, emerges as the most promising solution in autonomous driving systems. Nevertheless, real-time system-on-chip (SoC) implementation of semantic LiDAR SLAM has not been reported, primarily due to memory-intensive and compute-intensive operations caused by the simultaneous execution of multiple algorithms. Moreover, achieving real-time performance has not been feasible, even in the high-performance CPU $+$ GPU. In this article, a real-time and fully integrated semantic LiDAR SLAM processor (LSPU) is presented with semantic LiDAR-PNN-SLAM (LP-SLAM) system, which provides point neural network (PNN)-based 3-D segmentation, localization, and mapping simultaneously. The LSPU executes the LP-SLAM with the following features: 1) a $k$ -nearest neighbor (kNN) cluster with 2-D/3-D spherical coordinate-based bin (SB) searching to eliminate external memory access through dynamic memory allocation; 2) a PNN engine (PNNE) with a global point-level task scheduler (GPTS) to maximize core utilization by two-step workload balancing; 3) a keypoint extraction core (KEC) to skip redundant computation in the sorting operation; and 4) an optimization cluster with reconfigurable computation modes to support keypoint-level pipelining and parallel processing in non-linear optimization (NLO). As a result, the proposed LSPU achieves 20.7 ms of processing time, demonstrating real-time semantic LP-SLAM while consuming 99.89% lower energy compared to modern CPU $+$ GPU platforms.
- 6 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (1) , 112-124
An Energy-Efficient Processor for Real-Time Semantic LiDAR SLAM in Mobile Robots
Emerging mobile robots require simultaneous localization and mapping (SLAM) systems with advanced 3-D perception and long-range 360 $^{\circ}$ interaction for autonomous driving. However, previous SLAM processors, which targeted only camera-based visual SLAM, are unsuitable for autonomous driving systems due to their limited field of view (FoV), inaccurate depth estimation, and lack of perception. In contrast, LiDAR offers a long-range 3-D point cloud with precise depth information and 360 $^{\circ}$ FoV, enabling the capture of fine environmental details. With its high accuracy and environmental robustness, LiDAR SLAM with accurate 3-D perception, semantic LiDAR SLAM, emerges as the most promising solution in autonomous driving systems. Nevertheless, real-time system-on-chip (SoC) implementation of semantic LiDAR SLAM has not been reported, primarily due to memory-intensive and compute-intensive operations caused by the simultaneous execution of multiple algorithms. Moreover, achieving real-time performance has not been feasible, even in the high-performance CPU $+$ GPU. In this article, a real-time and fully integrated semantic LiDAR SLAM processor (LSPU) is presented with semantic LiDAR-PNN-SLAM (LP-SLAM) system, which provides point neural network (PNN)-based 3-D segmentation, localization, and mapping simultaneously. The LSPU executes the LP-SLAM with the following features: 1) a $k$ -nearest neighbor (kNN) cluster with 2-D/3-D spherical coordinate-based bin (SB) searching to eliminate external memory access through dynamic memory allocation; 2) a PNN engine (PNNE) with a global point-level task scheduler (GPTS) to maximize core utilization by two-step workload balancing; 3) a keypoint extraction core (KEC) to skip redundant computation in the sorting operation; and 4) an optimization cluster with reconfigurable computation modes to support keypoint-level pipelining and parallel processing in non-linear optimization (NLO). As a result, the proposed LSPU achieves 20.7 ms of processing time, demonstrating real-time semantic LP-SLAM while consuming 99.89% lower energy compared to modern CPU $+$ GPU platforms.