Ahmed Ahmed has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Scalable Over-the-Air Firmware Distribution Architecture for Industry 5.0 Based on SoC

    by Ahmed I. Ahmed, Mohamed A. Elshiemy, Lobna A. Said, Ahmed H. Madian

    This paper proposes a scalable and reliable over-the-air architecture that enables cloud wireless distribution of new firmware updates on industrial production lines’ System-on-Chip (SoC) boards. The proposed architecture integrates remotely interconnected embedded and software systems, which maintain the operation of a bitstream file programming system over a Wi-Fi network. A software Joint Test Action Group (JTAG) protocol emulation is custom-developed on an Espressif ESP-32 Wi-Fi MCU for a target SoC board programming using Open On-Chip Debugger (OpenOCD) and GPIO Bit-Banging. Simulations are performed using Flutter Web, Android, and iOS applications to upload a bitstream file to Google Firebase Cloud Storage, yielding matching results according to the proposed architecture. Various experimental works are conducted on two Digilent Nexys 4 Artix-7 FPGA Trainer Boards, achieving efficient OTA updating speeds of 6.50s, 22.42s, 55s, and 80.10s for different bitstream file sizes of 370KB, 1.50MB, 3.68MB, and 5.36MB, respectively.

  • A Design of Rechargeable In-Circuit Serial Programmer for Industrial Embedded Systems

    by Ahmed I. Ahmed, Bishoy K. Sharobim, Marwan A. Fetteha, Lobna A. Said, Ahmed M. Eltawil, Ahmed H. Madian

    Efficient industrial manual assembly lines provide high-quality products. Reliable portable assistive tools help workers finish manufacturing tasks efficiently. The Microchip AVR family of 8-bit microcontrollers is widely used in electronic products, which includes the AT, ATtiny, ATmega, and ATxmega subfamilies. This paper proposes a design of a reliable rechargeable Microchip AVR In-Circuit Serial Programmer for programming Microchip AVR AT, ATtiny, and ATmega microcontrollers deploying the Programmer-To-Go functionality. It uniquely features a rechargeable Lithium-Ion battery, automatic selection of programming speed up to 4MHz, 3V-5V programming support, a microSD card that stores the firmware files required for programming, and an attached monochrome LCD that enables reliable ad-hoc programming. It supports Flash and EEPROM memories, Fuses, and Lock Bits reading, writing, verifying, and erasing based on the Microchip AVR STK500 communication protocol. Experimental work was conducted on the Arduino UNO development board. The results proved efficient programming (writing) time of 3s and 5s for 5KB and 20KB .hex files, and reading time of 5s and 7s of the same .hex files.


  • A Scalable FOTA Updating Architecture for Industry 4.0 Applications using Wi-Fi and LoRa

    by Ahmed I. Ahmed, Bishoy K. Sharobim, Marwan A. Fetteha, Lobna A. Said, Ahmed M. Eltawil, Ahmed H. Madian

    This paper proposes a scalable and efficient firmware-over-the-air (FOTA) updating architecture that reliably enables the simultaneous remote mass deployment of new firmware versions on Industry 4.0 machines. The architecture comprises remotely interconnected software and hardware sys-tems for providing firmware mass deployment employing Wi-Fi and LoRa technologies. A custom bootloader for Microchip 8-bit and 32-bit PIC microcontrollers has been developed to support remote FOTA operations. Cloud Web, Flutter mobile, and desktop applications are developed with a cloud server to provide remote FOTA operations. A simulation using cloud Web and Flutter mobile applications proves identical results according to the proposed architecture. Experimental work was performed on a Microchip PIC PIC18F4431 development board, and the results showed a significant match to the conducted simulation.

  • Top Cited Papers
    Open Access

    Internet of Things: A Comprehensive Overview on Protocols, Architectures, Technologies, Simulation Tools, and Future Directions

    by Mohammad Mansour, Amal Gamal, Ahmed I. Ahmed, Lobna A. Said, Abdelmoniem Elbaz, Norbert Herencsar, Ahmed Soltan

    The Internet of Things (IoT) is a global network of interconnected computing, sensing, and networking devices that can exchange data and information via various network protocols. It can connect numerous smart devices thanks to recent advances in wired, wireless, and hybrid technologies. Lightweight IoT protocols can compensate for IoT devices with restricted hardware characteristics in terms of storage, Central Processing Unit (CPU), energy, etc. Hence, it is critical to identify the optimal communication protocol for system architects. This necessitates an evaluation of next-generation networks with improved characteristics for connectivity. This paper highlights significant wireless and wired IoT technologies and their applications, offering a new categorization for conventional IoT network protocols. It provides an in-depth analysis of IoT communication protocols with detailed technical information about their stacks, limitations, and applications. The study further compares industrial IoT-compliant devices and software simulation tools. Finally, the study provides a summary of the current challenges, along with a broad overview of the future directions to tackle the challenges, in the next IoT generation. This study aims to provide a comprehensive primer on IoT concepts, protocols, and future insights that academics and professionals can use in various contexts.


  • IoT Microchip AVR Microcontroller’s Fuses and Lock Bits High Voltage Programmer

    by Ahmed I. Ahmed, Mohamed A. Elbhoty, Lobna A. Said, Ahmed H. Madian

    This paper proposes a reliable wireless configuration bits programmer for remotely resetting incorrectly-written Microchip AVR microcontrollers’ Fuses and Lock Bits. The incorrect configuration bits programming leads critically to a micro-controller malfunction which requires correct reprogramming. The proposed programmer utilizes Wi-Fi for enabling the remote configuration bits programming via a PC or a smart mobile device. It employs the Microchip AVR High Voltage Parallel and Serial Programming protocols which uniquely support the configuration bits programming feature. The configuration bits define a microcontroller’s hardware and operation settings, such as the bootloader feature and clock source selection. Simulations and experimental work are conducted on remotely reprogramming the Microchip AVR ATtiny85 and ATmega16A microcontrollers’ configuration bits using HVPP and HVSP protocols.


  • A Reliable Secure Architecture for Remote Wireless Controlling of Vehicle's Internal Systems based on Internet of Vehicles using RF and Wi-Fi

    by Ahmed I. Ahmed, Samy H. Sharf, Rafaat A. Salama, Mostafa A. Mekky, Mohamed A. Salama, Wael Badawy

    Internet of Vehicles is considered one of the most unprecedented outputs of the Internet of Things. No one has realized or even expected the rapidly-growing revolution regarding autonomous connected vehicles. Nowadays, Internet of Vehicles is massively progressing from Vehicular Ad-Hoc Networks as a huge futuristic research and development discipline. This paper proposes a novel reliable and secure architecture for ubiquitously controlling remote connected cars' internal systems, such as engine, doors' locks, sunroof, horn, windows' and lights' control systems. The main contribution is that the proposed architecture doesn't bypass the vehicle's original security coding, and doesn't require any electrical modifications to the vehicle's Engine Control Unit and Body Control Module wirings. The proposed architecture is composed of remotely connected embedded, software, and cloud-based platform systems. Two designs of wireless control boards based on RF and Wi-Fi are provided for enabling remote control using the original vehicle's encrypted key and mobile application. A simulation is implemented using the original vehicle's encrypted key and Android application proving matching results according to the proposed architecture. Experimental work is conducted on RF and Wi-Fi relays' control boards along with KEYDIY K909 RF encrypted key for controlling a 2013 Hyundai Elantra MD vehicle, and the studied results proved a successful and reliable remote wireless controlling of the vehicle's internal systems.


  • Over-The-Air Firmware Updating Model suitable for Industrial IoT based on Microchip AVR MCU

    by Ahmed I. Ahmed, Lobna A. Said, Ahmed H. Madian

    This paper proposes a novel over-the-air firmware updating model suitable for integration with Industry 4.0 factories. The model includes a state-of-the-art design of a wireless programmer device that remotely receives new firmware versions and then updates a connected machine. The employed programming protocols are high voltage parallel and serial programming. They support all programming functions of a target machine's micro-controller: reading, writing, verifying, and erasing Flash and EEPROM memories, reading, writing, and resetting fuses and lock bits, and reading the target machine's micro-controller signature. A simulation is conducted on a desktop application proving complete matching results to the proposed model. Experimental work is carried on Microchip AVR ATtiny13A microcontroller, and the results proved an excellent match to the simulation profile.


  • Design of IoT Microchip AVR Programmer for FOTA Updates based on Unified Programming and Debug Interface using Wi-Fi and LoRa

    by Ahmed I. Ahmed, Samy H. Sharf, Lobna A. Said, Ahmed H. Madian

    Recently, Microchip Technology has introduced a new interface for external programming and on-chip debugging of tinyAVR, megaAVR, and AVR-Dx families of microcontrollers, which is called; Unified Programming and Debug Interface (UPDI). It is a successor to the Programming and Debug Interface (PDI), which physically depends on two wires and exists on all microcontrollers of the AVR XMEGA family. UPDI provides microcontrollers programming and debugging via a bi-directional half-duplex asynchronous communication using a single-wire interface. This paper proposes an IoT Microchip AVR programmer which supports UPDI using Wi-Fi and LoRa technologies. It provides over-the-air firmware updating to the supported families of microcontrollers. Simulations are performed using the AVRDUDESS desktop application showing successful over the air (OTA) firmware updating. Experimental work is conducted on a Microchip AVR ATtiny3216 microcontroller, and the results proved a match to the carried-on simulations.


  • A Scalable Firmware-Over-The-Air Architecture suitable for Industrial IoT Applications

    by Ahmed I. Ahmed, Eslam I. Shahin, Lobna A. Said, Ahmed H. Madian

    This paper proposes a reliable and scalable architecture for firmware-over-the-air updates, which provides remote cloud real-time distribution of new firmware versions on industrial machines in an efficient simultaneous manner. The architecture comprises remotely interconnected software and hardware systems for handling the procedures of firmware distribution over a wireless network. The main contributions are developing a special boot-loader for ARM micro-controllers and an Android application for performing FOTA updates. A simulation is performed using Web and Android applications showing identical results based on the proposed architecture. Experimental work is performed on two ARM STM32F103C8T6 development boards, and the collected results showed a great match to the conducted simulation.