In-Hwan Baek
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
In-Hwan Baek has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Taek-Mo Chung
Thin Film Materials Research Center, Korea Research Institute of Chemical Technology, 141 Gajeong-ro, Yuseong-gu, Daejeon 34114, Republic of Korea
6 shared publications Minki Choe
Department of Chemistry and Chemical Engineering, and Program in Semiconductor Convergence
5 shared publications- Seong Keun Kim
Korea Institute of Science and Technology
5 shared publications Inhong Hwang
Department of Chemistry and Chemical Engineering, and Program in Semiconductor Convergence
4 shared publicationsDahui Jeon
Department of Chemistry and Chemical Engineering, Inha University, Incheon, 22212, Republic of Korea
3 shared publications- Seung Ho Ryu
Electronic and Hybrid Materials Research Center Korea Institute of Science and Technology Seoul Republic of Korea
3 shared publications
Latest Publications
- Open Access
- 29 July 2026
- Published by Wiley in Advanced Science
- Vol. 13 (59) , e76809
Selective Polarity Control of Metal Oxide Semiconductors for Complementary Logic Gates
Realizing tunable charge carrier polarity is essential for programmable complementary logic circuits. While two‐dimensional (2D) semiconductors have demonstrated polarity controllability through Schottky barrier modulation or contact engineering, their high interfacial sensitivity limits scalability and integration. Here, we present a robust polarity‐conversion strategy for tin oxide (SnO) semiconductors based on electrolyte‐gated transistors (EGTs). In situ electrochemical doping enables the conversion of p‐type SnO to n‐type SnO 2 via Sn 2+ to Sn 4+ oxidation. Both p‐ and n‐type EGTs exhibit outstanding electrical characteristics, including low‐voltage operation, high ON/OFF current ratios, sharp switching behavior, and reliable long‐term stability. Furthermore, we demonstrate the monolithic integration of complementary logic gates, including inverter, NAND, and NOR gates, through spatially selective electrochemical doping of a single SnO layer. Overall, this work provides a scalable and versatile pathway toward oxide‐based programmable complementary circuits.
- 29 July 2026
- Published by Wiley in Advanced Science
- Vol. 13 (59) , e76809
Open AccessSelective Polarity Control of Metal Oxide Semiconductors for Complementary Logic Gates
Realizing tunable charge carrier polarity is essential for programmable complementary logic circuits. While two‐dimensional (2D) semiconductors have demonstrated polarity controllability through Schottky barrier modulation or contact engineering, their high interfacial sensitivity limits scalability and integration. Here, we present a robust polarity‐conversion strategy for tin oxide (SnO) semiconductors based on electrolyte‐gated transistors (EGTs). In situ electrochemical doping enables the conversion of p‐type SnO to n‐type SnO 2 via Sn 2+ to Sn 4+ oxidation. Both p‐ and n‐type EGTs exhibit outstanding electrical characteristics, including low‐voltage operation, high ON/OFF current ratios, sharp switching behavior, and reliable long‐term stability. Furthermore, we demonstrate the monolithic integration of complementary logic gates, including inverter, NAND, and NOR gates, through spatially selective electrochemical doping of a single SnO layer. Overall, this work provides a scalable and versatile pathway toward oxide‐based programmable complementary circuits.
- Open Access
- 24 June 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (32) , 14484-14491
Resolving the contact–channel trade-off in p-type SnO thin-film transistors via self-aligned fluorine plasma treatment
High-performance p-type oxide thin-film transistors (TFTs) are essential for realizing complementary monolithic three-dimensional (M3D) integrated circuits within the back-end-of-line (BEOL) thermal budget. Among p-type oxide semiconductors, SnO has emerged as a promising material because of its relatively high hole mobility. However, the practical implementation of p-type metal oxide TFTs remains limited by an inherent trade-off between contact resistance and gate controllability. Reducing the channel thickness suppresses off-state leakage current but simultaneously increases contact resistance substantially. Here, we report a self-aligned C4F8/He plasma treatment for atomic layer deposition grown p-type SnO TFTs that overcomes this trade-off in a single fabrication step. The metal source/drain electrodes serve as an intrinsic mask, selectively exposing only the back channel to the plasma while preserving the SnO beneath the contacts in its as-deposited, low-resistance state. The treatment amorphizes the upper region of the back channel and incorporates fluorine via substitution at oxygen sites, thereby reducing the effective conducting thickness and modulating the carrier concentration. This effect is evidenced by an upward shift of the Fermi level relative to the valence band maximum. Crystal orbital Hamilton population analysis further indicates that fluorine substitution strengthens local Sn–O bonding, providing a lattice-level mechanism for suppressing the regeneration of oxygen-related defects during ambient operation. The optimized F-doped SnO TFT with a passivation layer exhibits a width-normalized contact resistance of 0.04 kΩ·cm, an on/off current ratio of ~106, a substantially reduced subthreshold swing, and negligible degradation after 12 months of ambient storage. These results demonstrate that the proposed self-aligned strategy offers a practical route to high-performance p-type SnO TFTs for BEOL-compatible M3D integration.
- 24 June 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (32) , 14484-14491
Open AccessResolving the contact–channel trade-off in p-type SnO thin-film transistors via self-aligned fluorine plasma treatment
High-performance p-type oxide thin-film transistors (TFTs) are essential for realizing complementary monolithic three-dimensional (M3D) integrated circuits within the back-end-of-line (BEOL) thermal budget. Among p-type oxide semiconductors, SnO has emerged as a promising material because of its relatively high hole mobility. However, the practical implementation of p-type metal oxide TFTs remains limited by an inherent trade-off between contact resistance and gate controllability. Reducing the channel thickness suppresses off-state leakage current but simultaneously increases contact resistance substantially. Here, we report a self-aligned C4F8/He plasma treatment for atomic layer deposition grown p-type SnO TFTs that overcomes this trade-off in a single fabrication step. The metal source/drain electrodes serve as an intrinsic mask, selectively exposing only the back channel to the plasma while preserving the SnO beneath the contacts in its as-deposited, low-resistance state. The treatment amorphizes the upper region of the back channel and incorporates fluorine via substitution at oxygen sites, thereby reducing the effective conducting thickness and modulating the carrier concentration. This effect is evidenced by an upward shift of the Fermi level relative to the valence band maximum. Crystal orbital Hamilton population analysis further indicates that fluorine substitution strengthens local Sn–O bonding, providing a lattice-level mechanism for suppressing the regeneration of oxygen-related defects during ambient operation. The optimized F-doped SnO TFT with a passivation layer exhibits a width-normalized contact resistance of 0.04 kΩ·cm, an on/off current ratio of ~106, a substantially reduced subthreshold swing, and negligible degradation after 12 months of ambient storage. These results demonstrate that the proposed self-aligned strategy offers a practical route to high-performance p-type SnO TFTs for BEOL-compatible M3D integration.
- 8 February 2026
- Published by Elsevier in Applied Surface Science
- Vol. 729
Humidity-mediated room-temperature NO2 sensing using 2D SnS2 nanoplates
- 8 February 2026
- Published by Elsevier in Applied Surface Science
- Vol. 729
Humidity-mediated room-temperature NO2 sensing using 2D SnS2 nanoplates
- 29 November 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (23) , 9487-9493
Kinetically Confined Sulfurization for Continuous Growth of Layered SnS Films
- 29 November 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (23) , 9487-9493
Kinetically Confined Sulfurization for Continuous Growth of Layered SnS Films
- Open Access
- 25 November 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 41961
Optimizing the crystallinity of ZrO2 gate insulator in indium gallium zinc oxide thin-film transistors through atomic layer deposition process temperature control
The optimization of zirconium oxide (ZrO2) crystallinity for gate insulators (GI) in indium gallium zinc oxide (IGZO) thin-film transistors (TFTs) was studied to enhance the performance of dynamic random-access memory (DRAM) cell transistors. ZrO2 films were deposited via atomic layer deposition (ALD) at temperatures ranging from 150 °C to 300 °C, yielding varied crystallinity from amorphous to high-crystallinity phases. Meso-crystalline ZrO2 films deposited at 200 °C achieved an optimal trade-off between ON and OFF current characteristics, attributed to reduced grain boundary leakage and an improved dielectric constant. Films deposited at higher temperatures (250 °C and 300 °C) exhibited increased OFF current and ON/OFF ratio degradation due to crystallization-induced defects, while lower temperatures (150 °C) led to reliability issues from oxygen vacancies and carbon impurities. These results indicate the importance of precise temperature control during the ALD process to achieve meso-crystalline ZrO2, ensuring enhanced ON/OFF ratios, and device stability.
- 25 November 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 41961
Open AccessOptimizing the crystallinity of ZrO2 gate insulator in indium gallium zinc oxide thin-film transistors through atomic layer deposition process temperature control
The optimization of zirconium oxide (ZrO2) crystallinity for gate insulators (GI) in indium gallium zinc oxide (IGZO) thin-film transistors (TFTs) was studied to enhance the performance of dynamic random-access memory (DRAM) cell transistors. ZrO2 films were deposited via atomic layer deposition (ALD) at temperatures ranging from 150 °C to 300 °C, yielding varied crystallinity from amorphous to high-crystallinity phases. Meso-crystalline ZrO2 films deposited at 200 °C achieved an optimal trade-off between ON and OFF current characteristics, attributed to reduced grain boundary leakage and an improved dielectric constant. Films deposited at higher temperatures (250 °C and 300 °C) exhibited increased OFF current and ON/OFF ratio degradation due to crystallization-induced defects, while lower temperatures (150 °C) led to reliability issues from oxygen vacancies and carbon impurities. These results indicate the importance of precise temperature control during the ALD process to achieve meso-crystalline ZrO2, ensuring enhanced ON/OFF ratios, and device stability.
- 23 June 2025
- Published by Elsevier in Applied Surface Science
- Vol. 710
Atomic layer deposition of conductive SnO2 thin films using Sn(dmamp)2 and H2O2 for templating rutile TiO2 growth
- 23 June 2025
- Published by Elsevier in Applied Surface Science
- Vol. 710
Atomic layer deposition of conductive SnO2 thin films using Sn(dmamp)2 and H2O2 for templating rutile TiO2 growth
- 15 May 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (24) , 12308-12316
Stabilization of top-gate p-SnO transistors via ultrathin Al2O3 interlayers for hysteresis-free operation
Hysteresis-free and stable operation achieved in top-gate SnO TFTs by inserting an Al2O3 interlayer that protects the surface of the metastable SnO channel.
- 15 May 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (24) , 12308-12316
Stabilization of top-gate p-SnO transistors via ultrathin Al2O3 interlayers for hysteresis-free operation
Hysteresis-free and stable operation achieved in top-gate SnO TFTs by inserting an Al2O3 interlayer that protects the surface of the metastable SnO channel.
- 20 January 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (3)
Ultrahigh field-effect mobility of 147.5 cm2/Vs in ultrathin In2O3 transistors via passivating the surface of polycrystalline HfO2 gate dielectrics
This study presents considerable improvements in the electrical characteristics of atomic-layer-deposited 3-nm-thick In2O3 thin-film transistors (TFTs), which were achieved by introducing a 2-nm-thick amorphous Al2O3 interfacial layer to passivate the surface of a polycrystalline HfO2 gate dielectric. The resulting devices exhibited exceptional electrical characteristics, including an ultrahigh field-effect mobility (μFE) of approximately 147.5 ± 16.6 cm2/V s, subthreshold swing of 103.7 ± 9.1 mV/dec, and threshold voltage (VTH) of 0.5 ± 0.1 V. These enhancement-mode devices represent increases of more than threefold in μFE compared to devices without an amorphous passivation layer. This is despite all the fabrication processes being identical, except for the introduction of the Al2O3 interfacial layer. This improvement can be primarily attributed to the reduced electron scattering through suppressed remote Coulomb interactions. Furthermore, the In2O3 TFTs exhibited enhanced operational stability, showing minimal VTH shifts of 0.15 and −0.01 V under positive and negative bias-stress conditions, respectively. The findings of this study emphasize the critical role of the surface passivation of polycrystalline HfO2 dielectrics in improving the electrical performance of ultrathin In2O3 TFTs.
- 20 January 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (3)
Ultrahigh field-effect mobility of 147.5 cm2/Vs in ultrathin In2O3 transistors via passivating the surface of polycrystalline HfO2 gate dielectrics
This study presents considerable improvements in the electrical characteristics of atomic-layer-deposited 3-nm-thick In2O3 thin-film transistors (TFTs), which were achieved by introducing a 2-nm-thick amorphous Al2O3 interfacial layer to passivate the surface of a polycrystalline HfO2 gate dielectric. The resulting devices exhibited exceptional electrical characteristics, including an ultrahigh field-effect mobility (μFE) of approximately 147.5 ± 16.6 cm2/V s, subthreshold swing of 103.7 ± 9.1 mV/dec, and threshold voltage (VTH) of 0.5 ± 0.1 V. These enhancement-mode devices represent increases of more than threefold in μFE compared to devices without an amorphous passivation layer. This is despite all the fabrication processes being identical, except for the introduction of the Al2O3 interfacial layer. This improvement can be primarily attributed to the reduced electron scattering through suppressed remote Coulomb interactions. Furthermore, the In2O3 TFTs exhibited enhanced operational stability, showing minimal VTH shifts of 0.15 and −0.01 V under positive and negative bias-stress conditions, respectively. The findings of this study emphasize the critical role of the surface passivation of polycrystalline HfO2 dielectrics in improving the electrical performance of ultrathin In2O3 TFTs.
- 31 October 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (45) , 18167-18200
Atomic layer deposition of oxide semiconductor thin films for transistor applications: a review
The accelerated evolution of artificial intelligence (AI) and semiconductor technologies has fostered a mutually reinforcing relationship, whereby each technology has contributed to the advancement of the other. However, the advancement of semiconductor technology is currently hampered by the lateral scaling limitations of silicon-based transistors, creating a bottleneck for mutual advancement. Innovative channel materials capable of increasing transistor/cell density through vertical integration processes are required for continued advances in semiconductors and AI. Oxide semiconductors are prime candidates for back-end-of-line (BEOL)-compatible thin-film transistors (TFTs), which are essential for vertically stackable 3D device technologies due to their excellent electrical properties and compatibility with atomic layer deposition (ALD). In this review, we explore the latest developments in ALD-derived n- and p-type oxide TFTs, with a particular focus on performance enhancement strategies including composition modulation, interface and surface engineering, ion doping, and process control. The integration of oxide semiconductors via ALD is of the utmost importance for contemporary semiconductor devices, as it enables the implementation of vertical CMOS logic circuits and advanced memory technologies, including 3D-DRAM. Our findings indicate that ALD-derived oxide semiconductors have the potential to overcome current limitations and facilitate the development of the next generation of high-performance, vertically integrated semiconductor devices.
- 31 October 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (45) , 18167-18200
Atomic layer deposition of oxide semiconductor thin films for transistor applications: a review
The accelerated evolution of artificial intelligence (AI) and semiconductor technologies has fostered a mutually reinforcing relationship, whereby each technology has contributed to the advancement of the other. However, the advancement of semiconductor technology is currently hampered by the lateral scaling limitations of silicon-based transistors, creating a bottleneck for mutual advancement. Innovative channel materials capable of increasing transistor/cell density through vertical integration processes are required for continued advances in semiconductors and AI. Oxide semiconductors are prime candidates for back-end-of-line (BEOL)-compatible thin-film transistors (TFTs), which are essential for vertically stackable 3D device technologies due to their excellent electrical properties and compatibility with atomic layer deposition (ALD). In this review, we explore the latest developments in ALD-derived n- and p-type oxide TFTs, with a particular focus on performance enhancement strategies including composition modulation, interface and surface engineering, ion doping, and process control. The integration of oxide semiconductors via ALD is of the utmost importance for contemporary semiconductor devices, as it enables the implementation of vertical CMOS logic circuits and advanced memory technologies, including 3D-DRAM. Our findings indicate that ALD-derived oxide semiconductors have the potential to overcome current limitations and facilitate the development of the next generation of high-performance, vertically integrated semiconductor devices.