JPJan Pařez

Jan Pařez

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jan Pařez has a total of 8 co-authors. Here are the top co-authors by number of shared publications:

  • Adam Tater

    Center of Aviation and Space Research, Faculty of Mechanical Engineering, Czech Technical University in Prague, Prague, Czech Republic

    4 shared publications
  • Tomáš Vampola

    Center of Aviation and Space Research, Faculty of Mechanical Engineering, Czech Technical University in Prague, Praha 6, Czech Republic

    3 shared publications
  • Patrik Kovář

    Center of Aviation and Space Research, Faculty of Mechanical Engineering, Czech Technical University in Prague, Praha 6, Czech Republic

    2 shared publications
  • Patrik Kovář

    Center of Aviation and Space Research, Faculty of Mechanical Engineering, Czech Technical University in Prague, Prague, Czech Republic

    2 shared publications
  • Pavel Mačák

    Center of Aviation and Space Research, Faculty of Mechanical Engineering, Czech Technical University in Prague, Prague, Czech Republic

    2 shared publications
  • Adam Tater

    Czech Technical University in Prague, Faculty of Mechanical Engineering, Center of Aviation and Space Research, Technická 4, Prague 6, Czech Republic

    1 shared publication

Latest Publications

  • A time-efficient optimization of subsonic centrifugal compressors with vaneless diffuser using 1D mean line approach based on empirical loss correlations

    by Patrik Kovář, Adam Tater, Pavel Mačák, Jan Pařez

    The present paper focuses on the time-efficient optimization of subsonic centrifugal compressors with vaneless diffuser using a one-dimensional mean line approach based on empirical loss correlations. The main motivation for this research is the application of a compressor loss model, in-house developed and tested, in optimization task for the preliminary design of centrifugal compressor used in turboprop applications. While operational, various loss mechanisms and physical phenomena may occur in centrifugal compressors. Models of these losses, which are precisely described in this work, combined with off-design performance prediction algorithm, constitute an essential tool for predicting the off-design behavior of centrifugal compressors. This study utilizes an off-design performance prediction algorithm based on an iterative loop as the core of the geometry optimization process. The reconstruction of the subsonic Eckardt-O compressor’s geometry is described in great detail, and it is then transformed into parametric model using Bezier curves for further optimization. This process included the optimization of a total of 36 parameters describing various geometrical elements. A suitable candidate was found as a result of this optimization. By comparing the flow paths, it was concluded that the optimized compressor is more economical in terms of connection dimensions, which can be important in certain applications. Another comparison showed that the optimized compressor achieves comparable results in terms of pressure ratio as the original geometry and surpasses it in terms of efficiency by 1.49%.


  • Open Access

    Prediction of temperature field distribution in a gas turbine using a higher order neural network

    by Jan Pařez, Patrik Kovář, Adam Tater

    This paper presents the prediction of temperature field distribution in a single annular section using an artificial neural network (ANN). This temperature distribution is non-uniform on the outer tube due to continuous natural convection and radiation caused by the homogeneous steady-state heating of the inner tube, which represents the hot gas flow path through the turbine. The outer tube represents the case of a gas turbine. This temperature is important for the electronic components attached to the engine or the overall engine deformation. The presented approach allows for a quick estimation of the temperature distribution without the need to perform time consuming computational fluid dynamics (CFD) simulations. This can greatly accelerate the design and development of gas turbines. A machine learning approach is applied to an extensive set of CFD simulations under different operating conditions and geometry setups.

  • Influence of geometrical design on the cooling process of double annular turbine section

    by Jan Pařez, Adam Tater, Patrik Kovář, Pavel Mačák, Tomáš Vampola

    The article describes the issue of gas turbine cooling after operation. Due to natural convection, an asymmetric temperature distribution occurs in the double annulus, which has a significant effect on the thermal bow of the rotor. At the same time, the desire to minimize radial clearances as this brings the advantage of higher engine efficiency is nowadays essential. On the other hand, it also requires the ability to understand and predict the cooling transient to avoid critical failures during engine restart. Based on a real engine, an experimental facility was designed to represent a simplified double annulus flow path in a section of the turbine flow path. Experimental measurements were performed and a computational model of natural convective flow during gas turbine cooling was developed. The time dependence of the temperature fields was observed and compared with computational model. Furthermore, the dependence of the temperature differences between the upper and lower double annulus was presented. The computational study is carried out with different geometrical setups, which were also validated by experimental measurements. It is shown that the thermal gradient of the rotor due to natural convection can be significantly affected by the choice of geometry and other constraints in this region. The results of the study showed several options to mitigate the rotor bow of a gas turbine. The applicability of the results may have a significant influence on the design and development of gas turbines nowadays.


  • Open Access

    Investigation of temperature fields during turboprop engine cooling simplified to the 3D double annulus

    by Jan Pařez, Adam Tater, Patrik Kovář

    Presented research deals with the phenomenon of natural convection and heat transfer which occurs while the gas turbine cools down after operation. Experimental facilities for measuring temperature field in a double annulus is described and studied. At the base of the experimental facilities is emulated numerical model. Nowadays, there is an effort to minimize radial clearances as it brings the benefit of higher efficiency. On the other hand, it also requires the ability to understand and predict the transient cooling cycle to avoid critical failures. Experimental facilities represent a simplified flow path of double annulus in the section of the turbine flow path. The time dependence of the temperature fields were monitored. In addition, the dependence of the temperature differences between each top and bottom double annulus is stated. This is important to determine the thermal bow of the rotor and has a significant impact on the safety and trouble-free operation of the gas turbine engine. A computational study is performed with different geometrical setups. It has been shown that the thermal rotor bow caused by natural convection can be significantly influenced by the choice of the geometry and additional obstacles in this region. Results of the study have shown several options to mitigate the rotor bow of a gas turbine.

  • Open Access

    Experimental and numerical study of natural convection in 3D double horizontal annulus

    by Jan Pařez, Adam Tater, Jiří Polanský, Tomáš Vampola

    Presented paper is focused on numerical simulation of turboprop engine cooling in the section of a gas turbine. The method of heat transfer motor cooling by natural convection and radiation is described. The heat transfer in gas turbine section is represented on a simplified double annular geometry. Numerical data were compared with data that was gained from measuring on an experimental stand. The surface temperatures of the tubes were measured on the experiment stand during the cooling of the engine model. Numerical and experimental results reach a good agreement and will be further applied to the study of temperature-dependent deformation of aircraft engine parts, which have a significant effect on the safety and flawless operation of the aircraft engine.


  • Open Access

    Heat Transfer in Double Annular due to Natural Convection

    by Jan Pařez, Pavel Rohan, Tomáš Vampola

    Presented paper is focused on 2D numerical simulation of turboprop engine cooling in the section of a gas turbine. The paper describes the issue of heat transfer by natural cooling of a turboprop engine in the turbine region in order to determine the time-dependent temperature field in the engine. The analysis is represented on a simplified double annular geometry, where the inner tube represents the engine rotor, the middle tube represents the flow path and the outer ring replaces the engine case. Simultaneous heat transfer by natural convection (Boussinesq model) and radiation (model S2S) is solved on this geometry. Numerical data were compared with data that was gained from measuring on an experimental stand. The surface temperatures of the tubes were measured on the experiment stand during the cooling of the engine model. The temperatures on the walls of the flow path were based on real temperatures of the running engine as initial conditions together with the temperature of the outer tube. The results will be further applied to the study of temperature-dependent deformation of aircraft engine parts, which have a significant effect on the safety and trouble-free operation of the aircraft engine.