Elisa Gargini
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Elisa Gargini has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Nicola Casagli
Department of Earth Sciences, University of Florence, Florence, Italy
3 shared publications - Veronica Tofani
University of Florence
3 shared publications - Agnese Innocenti
Department of Earth Sciences, University of Florence, Florence, Italy
2 shared publications - Ascanio Rosi
Department of Geosciences, University of Padova, Italy
2 shared publications - Elena Benedetta Masi
Department of Earth Sciences, University of Florence, Florence, Italy
2 shared publications - Samuele Segoni
Department of Earth Sciences, University of Florence, Florence, Italy
2 shared publications
Latest Publications
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Geophysical survey for the estimation of geotechnical parameters and for the stability assessment of the Tehilly landslide (VdA, Italy)
An efficient stability analysis is closely linked to a good assignment of geotechnical parameters to the strata identified in the construction of the geological model. However, it is not always possible to determine the geotechnical parameters from direct tests, but there are indirect methods in the literature for determining the main geotechnical parameters of the ground using seismic parameters such as seismic velocities.Numerous correlations exist in the literature between shear wave velocity (VS), and the N-SPT value derived from penetrometric tests.This study presents the geotechnical model of the Theilly landslide (Western Alps, Italy) obtained by integrating the results of a multi-parameter geophysical survey (H/V seismic noise and ground-penetrating radar) with stratigraphic and geomorphologic observations, digital terrain model and field survey data. It is shown how VS values can be related to values obtained from direct tests such as N-SPT and, using the direct or estimated N-SPT value, it is possible to directly derive the friction angle value (φ'). Although, the indirect estimation of N-SPT is subject to a higher level of error, it could be very useful in the early stages of an emergency, when direct data are not available, and a preliminary forward and backward stability analysis could be performed to assess landslide evolution and civil protection actions.Geophysical surveys were conducted on the landslide body and on nearby locations. The H/V survey identified the presence of 2 discontinuity surfaces and thus the presence of 3 seismo-layers. The GPR survey allowed the surface portion of the slope to be studied, identifying an extremely heterogeneous debris layer.The H/V data allowed the interface depth to be related to the frequency of the identified peaks and the VS of the identified seismic layers. It was then possible to apply empirical equations to derive the value of N-SPT, and consequently φ', from the VS obtained through the H/V measurements.The geotechnical parameters obtained from geophysical and direct tests were used to create a geotechnical model of the landslide to perform a reliable stability analysis. The analysis of the triggering conditions of the landslide was conducted through hydrologic-geotechnical modelling, evaluating the behaviour of the slope under different rainfall scenarios, and considering the stabilization interventions present on the slope.The results of the filtration analyses showed a top-down saturation mechanism, which resulted in the generation of positive pore water pressure in the first few meters of soil and the formation of a saturated front with a maximum thickness of 5 m. Stability analyses conducted for the same events showed the development of a shallow landslide affecting the first few meters of saturated soil.The geotechnical parameters estimated from the geophysical tests are in agreement with the data from the direct tests and have made it possible to create a geotechnical model that is faithful to reality.The modelling results are compatible with the actual evolution of the phenomenon and have provided insight into the triggering mechanism, providing models to support future interventions.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessGeophysical survey for the estimation of geotechnical parameters and for the stability assessment of the Tehilly landslide (VdA, Italy)
An efficient stability analysis is closely linked to a good assignment of geotechnical parameters to the strata identified in the construction of the geological model. However, it is not always possible to determine the geotechnical parameters from direct tests, but there are indirect methods in the literature for determining the main geotechnical parameters of the ground using seismic parameters such as seismic velocities.Numerous correlations exist in the literature between shear wave velocity (VS), and the N-SPT value derived from penetrometric tests.This study presents the geotechnical model of the Theilly landslide (Western Alps, Italy) obtained by integrating the results of a multi-parameter geophysical survey (H/V seismic noise and ground-penetrating radar) with stratigraphic and geomorphologic observations, digital terrain model and field survey data. It is shown how VS values can be related to values obtained from direct tests such as N-SPT and, using the direct or estimated N-SPT value, it is possible to directly derive the friction angle value (φ'). Although, the indirect estimation of N-SPT is subject to a higher level of error, it could be very useful in the early stages of an emergency, when direct data are not available, and a preliminary forward and backward stability analysis could be performed to assess landslide evolution and civil protection actions.Geophysical surveys were conducted on the landslide body and on nearby locations. The H/V survey identified the presence of 2 discontinuity surfaces and thus the presence of 3 seismo-layers. The GPR survey allowed the surface portion of the slope to be studied, identifying an extremely heterogeneous debris layer.The H/V data allowed the interface depth to be related to the frequency of the identified peaks and the VS of the identified seismic layers. It was then possible to apply empirical equations to derive the value of N-SPT, and consequently φ', from the VS obtained through the H/V measurements.The geotechnical parameters obtained from geophysical and direct tests were used to create a geotechnical model of the landslide to perform a reliable stability analysis. The analysis of the triggering conditions of the landslide was conducted through hydrologic-geotechnical modelling, evaluating the behaviour of the slope under different rainfall scenarios, and considering the stabilization interventions present on the slope.The results of the filtration analyses showed a top-down saturation mechanism, which resulted in the generation of positive pore water pressure in the first few meters of soil and the formation of a saturated front with a maximum thickness of 5 m. Stability analyses conducted for the same events showed the development of a shallow landslide affecting the first few meters of saturated soil.The geotechnical parameters estimated from the geophysical tests are in agreement with the data from the direct tests and have made it possible to create a geotechnical model that is faithful to reality.The modelling results are compatible with the actual evolution of the phenomenon and have provided insight into the triggering mechanism, providing models to support future interventions.
- Open Access
- 1 January 2025
- Published by Springer Nature
- p. 239-259
The 6th World Landslide Forum (WLF6), Florence, 2023
The 6th World Landslide Forum “Landslides Science for sustainable development” (WLF6; https://wlf6.org) was held in Florence from November 14 to 17, 2023. The Forum was focused on Landslide Science for Sustainable Development, as a contribution to the Kyoto 2020 Commitment for global promotion of understanding and reducing landslide disaster risk (KLC2020). The Forum addressed key aspects related to landslide analysis, landslide monitoring and early warning, landslide modeling, landslide hazard and risk assessment, mitigation techniques, landslide triggering mechanism and climate change. The WLF6 was attended by more than 1200 participants from 61 countries. 853 abstracts were accepted, including 643 oral presentations and 210 e-posters. The 6th World Landslide Forum was awarded the Medal of the President of the Italian Republic, which is awarded for events of great scientific and cultural importance. Furthermore, the Forum was a sustainable event in line with the 2030 Agenda and the Sustainable Development Goals.
- 1 January 2025
- Published by Springer Nature
- p. 239-259
Open AccessThe 6th World Landslide Forum (WLF6), Florence, 2023
The 6th World Landslide Forum “Landslides Science for sustainable development” (WLF6; https://wlf6.org) was held in Florence from November 14 to 17, 2023. The Forum was focused on Landslide Science for Sustainable Development, as a contribution to the Kyoto 2020 Commitment for global promotion of understanding and reducing landslide disaster risk (KLC2020). The Forum addressed key aspects related to landslide analysis, landslide monitoring and early warning, landslide modeling, landslide hazard and risk assessment, mitigation techniques, landslide triggering mechanism and climate change. The WLF6 was attended by more than 1200 participants from 61 countries. 853 abstracts were accepted, including 643 oral presentations and 210 e-posters. The 6th World Landslide Forum was awarded the Medal of the President of the Italian Republic, which is awarded for events of great scientific and cultural importance. Furthermore, the Forum was a sustainable event in line with the 2030 Agenda and the Sustainable Development Goals.
- Open Access
- 19 April 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (8) , 2159
Geophysical Surveys for Geotechnical Model Reconstruction and Slope Stability Modelling
Performing a reliable stability analysis of a landslide slope requires a good understanding of the internal geometries and an accurate characterisation of the geotechnical parameters of the identified strata. Geotechnical models are commonly based on geomorphological data combined with direct and intrusive geotechnical investigations. However, the existence of numerous empirical correlations between seismic parameters (e.g., S-wave velocity) and geotechnical parameters in the literature has made it possible to investigate areas that are difficult to reach with direct instrumentation. These correlations are often overlooked even though they enable a reduction in investigation costs and time. By means of geophysical tests, it is in fact possible to estimate the N-SPT value and derive the friction angle from results obtained from environmental seismic noise measurements. Despite the empirical character and a certain level of uncertainty derived from the estimation of geotechnical parameters, these are particularly useful in the preliminary stages of an emergency, when straight data are not available and on all those soils where other direct in situ tests are not reliable. These correlations were successfully applied to the Theilly landslide (Western Alps, Italy), where the geotechnical model was obtained by integrating the results of a multi-parameter geophysical survey (H/V seismic noise and ground-penetrating radar) with stratigraphic and geomorphological observations, digital terrain model and field survey data. The analysis of the triggering conditions of the landslide was conducted by means of hydrological–geotechnical modelling, evaluating the behaviour of the slope under different rainfall scenarios and considering (or not) the stabilisation interventions present on the slope. The results of the filtration analyses for all events showed a top-down saturation mechanism, which led to the formation of a saturated face with a maximum thickness of 5 m. Stability analyses conducted for the same events showed the development of a shallow landslide in the first few metres of saturated soil. The modelling results are compatible with the actual evolution of the phenomenon and allow us to understand the triggering mechanism, providing models to support future interventions.
- 19 April 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (8) , 2159
Open AccessGeophysical Surveys for Geotechnical Model Reconstruction and Slope Stability Modelling
Performing a reliable stability analysis of a landslide slope requires a good understanding of the internal geometries and an accurate characterisation of the geotechnical parameters of the identified strata. Geotechnical models are commonly based on geomorphological data combined with direct and intrusive geotechnical investigations. However, the existence of numerous empirical correlations between seismic parameters (e.g., S-wave velocity) and geotechnical parameters in the literature has made it possible to investigate areas that are difficult to reach with direct instrumentation. These correlations are often overlooked even though they enable a reduction in investigation costs and time. By means of geophysical tests, it is in fact possible to estimate the N-SPT value and derive the friction angle from results obtained from environmental seismic noise measurements. Despite the empirical character and a certain level of uncertainty derived from the estimation of geotechnical parameters, these are particularly useful in the preliminary stages of an emergency, when straight data are not available and on all those soils where other direct in situ tests are not reliable. These correlations were successfully applied to the Theilly landslide (Western Alps, Italy), where the geotechnical model was obtained by integrating the results of a multi-parameter geophysical survey (H/V seismic noise and ground-penetrating radar) with stratigraphic and geomorphological observations, digital terrain model and field survey data. The analysis of the triggering conditions of the landslide was conducted by means of hydrological–geotechnical modelling, evaluating the behaviour of the slope under different rainfall scenarios and considering (or not) the stabilisation interventions present on the slope. The results of the filtration analyses for all events showed a top-down saturation mechanism, which led to the formation of a saturated face with a maximum thickness of 5 m. Stability analyses conducted for the same events showed the development of a shallow landslide in the first few metres of saturated soil. The modelling results are compatible with the actual evolution of the phenomenon and allow us to understand the triggering mechanism, providing models to support future interventions.
- 25 September 2017
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
- Vol. 107 (5) , 2094-2105
Numerical Modeling of Seismic Site Effects in a Shallow Alluvial Basin of the Northern Apennines (Italy)
The main purpose of this work is to investigate the basin‐edge effects on a cross section of an alluvial basin in the northern Apennines (Italy) and to compare the results with those obtained by applying existing approximate criteria to account for valley effects in cases of simple geometrical and stratigraphic conditions. The combined influence of geometry and layering of the basin was evaluated by performing 1D and 2D numerical analyses. The examined site is located in one of the highest seismicity zones of Tuscany. Geological, geophysical, and geotechnical information is obtained from extensive surveys carried out in the area as part of a pioneering Italian project (1998–2004) promoted and supported by the Regional Government of Tuscany to address microzoning studies on an urban scale. Five actual accelerometric signals were adopted in the analyses, consistent with a site reference spectrum defined according to Italian building code. To estimate the additional valley effects on the ground surface of the basin, numerical results from a 2D model were compared with the corresponding 1D numerical results obtained for an isolated soil column at the same location. A large number of vertical soil profiles were analyzed along the cross section, and different types of amplification factors were computed with reference to both peak ground accelerations and elastic response spectra. The results obtained were compared with those of existing approximate approaches for estimating basin effects on basic geometric and geological conditions (sine‐ or trapezoidal‐shaped valley, homogeneous soil deposits), fitting the actual cross section by a simplified symmetrical trapezoidal scheme.
- 25 September 2017
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
- Vol. 107 (5) , 2094-2105
Numerical Modeling of Seismic Site Effects in a Shallow Alluvial Basin of the Northern Apennines (Italy)
The main purpose of this work is to investigate the basin‐edge effects on a cross section of an alluvial basin in the northern Apennines (Italy) and to compare the results with those obtained by applying existing approximate criteria to account for valley effects in cases of simple geometrical and stratigraphic conditions. The combined influence of geometry and layering of the basin was evaluated by performing 1D and 2D numerical analyses. The examined site is located in one of the highest seismicity zones of Tuscany. Geological, geophysical, and geotechnical information is obtained from extensive surveys carried out in the area as part of a pioneering Italian project (1998–2004) promoted and supported by the Regional Government of Tuscany to address microzoning studies on an urban scale. Five actual accelerometric signals were adopted in the analyses, consistent with a site reference spectrum defined according to Italian building code. To estimate the additional valley effects on the ground surface of the basin, numerical results from a 2D model were compared with the corresponding 1D numerical results obtained for an isolated soil column at the same location. A large number of vertical soil profiles were analyzed along the cross section, and different types of amplification factors were computed with reference to both peak ground accelerations and elastic response spectra. The results obtained were compared with those of existing approximate approaches for estimating basin effects on basic geometric and geological conditions (sine‐ or trapezoidal‐shaped valley, homogeneous soil deposits), fitting the actual cross section by a simplified symmetrical trapezoidal scheme.