Onur Şen
Research Subjects
Onur Şen has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Mert Can Kahyalar
Tirsan Kardan A.Ş.
4 shared publications - Enver Atik
Manisa Celal Bayar Üniversitesi
1 shared publication - Hüseyin Özgürler
Tirsan Kardan A.Ş.
1 shared publication - Murat Özbakış
TİRSAN KARDAN SAN. VE TİC. A.Ş.
1 shared publication
Latest Publications
- Open Access
- 31 December 2024
- Published by Sakarya University Journal of Science in Sakarya University Journal of Science
- Vol. 28 (6) , 1296-1306
An Implementation of TRIZ in Innovative Product Development: An Oil Cap for Propeller Shaft
In today's competitive and rapidly developing market, the importance of innovative products is increasing. Innovative products are needed to maintain growth and competitiveness. For this purpose, companies study on innovative applications and try new methods in product development processes. In this context, this study focuses on integrating the TRIZ tool into the product development process and producing creative solutions to the problems encountered during the design and development phase. And the benefit of TRIZ is discussed by conducting a case study involving the development of an innovative product. In the case study, the development process of the oil cap, which is located on the propeller shaft used to transmit torque and rotation in motor vehicles and whose main function is to provide sealing between the external environment and the internal volume of the propeller shaft, is discussed. The reason why the oil cap was chosen as a case study was the difficulty encountered in the design process, as the oil cap was expected to both provide sealing and allow air flow in the area where it was positioned. TRIZ methodology was successfully implemented to development of the oil cap. As a result of the study, an innovative product was developed, and validated by implementing tests. Thus, TRIZ's contribution to innovative product development was objectively demonstrated with a case study in which a commercialized product was developed. Besides, a practical guide based on real study, which designers could apply in innovative product development, was presented by this study.
- 31 December 2024
- Published by Sakarya University Journal of Science in Sakarya University Journal of Science
- Vol. 28 (6) , 1296-1306
Open AccessAn Implementation of TRIZ in Innovative Product Development: An Oil Cap for Propeller Shaft
In today's competitive and rapidly developing market, the importance of innovative products is increasing. Innovative products are needed to maintain growth and competitiveness. For this purpose, companies study on innovative applications and try new methods in product development processes. In this context, this study focuses on integrating the TRIZ tool into the product development process and producing creative solutions to the problems encountered during the design and development phase. And the benefit of TRIZ is discussed by conducting a case study involving the development of an innovative product. In the case study, the development process of the oil cap, which is located on the propeller shaft used to transmit torque and rotation in motor vehicles and whose main function is to provide sealing between the external environment and the internal volume of the propeller shaft, is discussed. The reason why the oil cap was chosen as a case study was the difficulty encountered in the design process, as the oil cap was expected to both provide sealing and allow air flow in the area where it was positioned. TRIZ methodology was successfully implemented to development of the oil cap. As a result of the study, an innovative product was developed, and validated by implementing tests. Thus, TRIZ's contribution to innovative product development was objectively demonstrated with a case study in which a commercialized product was developed. Besides, a practical guide based on real study, which designers could apply in innovative product development, was presented by this study.
- 23 December 2024
- Published by SDU Journal of Natural and Applied Sciences in SDÜ Fen Bilimleri Enstitüsü Dergisi
- Vol. 28 (3) , 293-299
Ağır Ticari Araç Kardan Mili Kayıcı Takım Uygulamasında Spline Temas Boyunun Optimize Edilmesi ve Doğrulanması
Kardan millerinin yol koşullarına bağlı olarak açısal ve eksenel olmak üzere iki temel hareketi vardır. Açısal hareket üniversal mafsallar tarafından sağlanırken, eksenel hareket kayıcı takım tarafından sağlanır. Temel olarak, bir kayıcı takım, spline formları aracılığıyla birbirini kavrayan çatallı kayıcı mil ve kayıcı kovan olmak üzere iki parçadan oluşur. Parçalar, spline formlarının kavrama yüzeyleri sayesinde momenti iletirken aynı zamanda eksenel ileri-geri hareket edebilir. Motorlu aracın hareketi sırasında, kayıcı takım burulmaya maruz kalır. Burulma sırasında temas eden spline dişleri arasında basınç oluşumu meydana gelmektedir. Bu bağlamda, kayıcı takım tasarım sürecinde basınç ve gerilim dağılımı göz önüne alındığında spline formunun boyutu ve uzunluğu oldukça önemlidir. Çalışmada, kayıcı takımın yalnızca spline temas boyu değişimi sağlanarak dişler arasındaki basıncın analitik olarak hesaplanması sonucunda kayıcı takımın spline temas boyu optimize edilmiştir. Bu kapsamda, daha önce ortaya koyduğumuz bir çalışmada geçen ve sonlu elemanlar analizi (FEA) ile korele edilmiş olan spline dişlerinde kesme geriliminin analitik hesaplaması bu çalışmada da kullanılmıştır. Son olarak, optimize edilen spline boyuna sahip kayıcı takım laboratuvar ortamında statik burulma testine tabi tutulup, olumlu sonuçların alınmasıyla doğrulanmıştır. Kayıcı takım spline temas boyu optimizasyonu neticesinde (kayıcı kovan spline boyu değiştirilmeden) çatallı kayıcı milin spline boyunun azalması ile %6,1 seviyesinde ağırlık tasarrufu sağlanmıştır.
- 23 December 2024
- Published by SDU Journal of Natural and Applied Sciences in SDÜ Fen Bilimleri Enstitüsü Dergisi
- Vol. 28 (3) , 293-299
Ağır Ticari Araç Kardan Mili Kayıcı Takım Uygulamasında Spline Temas Boyunun Optimize Edilmesi ve Doğrulanması
Kardan millerinin yol koşullarına bağlı olarak açısal ve eksenel olmak üzere iki temel hareketi vardır. Açısal hareket üniversal mafsallar tarafından sağlanırken, eksenel hareket kayıcı takım tarafından sağlanır. Temel olarak, bir kayıcı takım, spline formları aracılığıyla birbirini kavrayan çatallı kayıcı mil ve kayıcı kovan olmak üzere iki parçadan oluşur. Parçalar, spline formlarının kavrama yüzeyleri sayesinde momenti iletirken aynı zamanda eksenel ileri-geri hareket edebilir. Motorlu aracın hareketi sırasında, kayıcı takım burulmaya maruz kalır. Burulma sırasında temas eden spline dişleri arasında basınç oluşumu meydana gelmektedir. Bu bağlamda, kayıcı takım tasarım sürecinde basınç ve gerilim dağılımı göz önüne alındığında spline formunun boyutu ve uzunluğu oldukça önemlidir. Çalışmada, kayıcı takımın yalnızca spline temas boyu değişimi sağlanarak dişler arasındaki basıncın analitik olarak hesaplanması sonucunda kayıcı takımın spline temas boyu optimize edilmiştir. Bu kapsamda, daha önce ortaya koyduğumuz bir çalışmada geçen ve sonlu elemanlar analizi (FEA) ile korele edilmiş olan spline dişlerinde kesme geriliminin analitik hesaplaması bu çalışmada da kullanılmıştır. Son olarak, optimize edilen spline boyuna sahip kayıcı takım laboratuvar ortamında statik burulma testine tabi tutulup, olumlu sonuçların alınmasıyla doğrulanmıştır. Kayıcı takım spline temas boyu optimizasyonu neticesinde (kayıcı kovan spline boyu değiştirilmeden) çatallı kayıcı milin spline boyunun azalması ile %6,1 seviyesinde ağırlık tasarrufu sağlanmıştır.
- 30 April 2023
- Published by Manufacturing Technologies and Applications in İmalat Teknolojileri ve Uygulamaları
- Vol. 4 (1) , 49-58
Investigation of The Effect of Reduced Shank Thickness of Friction Welded Yoke Shaft on Strength
Usage of friction welding method on the joints provides many advantages such as cost reduction, weight reduction and higher quality. The yoke shaft produced by rotary friction welding (RFW) involves a yoked part and a hollow round bar which are welded to each other. And so, no additional drilling method used in the way of removing material from the centre of the yoke shaft, is required to reduce the weight. The weight is inherently reduced thanks to hollow round bar used in RFW method. It is possible to use a friction welded yoke shaft in a wide range of wall thickness by removing material from the shank diameter for different applications. At this point, the key factor is strength of the friction welded yoke shaft with reduced wall thickness on the shank diameter. The aim of this study is investigation the effect of the reduced wall thickness of a yoke shaft produced by RFW on the strength. For this purpose, yoke shafts were manufactured by using RFW and consecutive processes such as turning and millings to reduce the wall thickness. The specimens in different wall thickness were tested to determine the strength. Additionally finite element analyses (FEAs) were implemented for each variation of the specimens and compared with the test results. As a result, it was determined that yoke shafts with reduced wall thicknesses, which were produced by RFW and then consecutively machining operations to obtain a specific wall thickness, can be used in drive shaft manufacturing securely.
- 30 April 2023
- Published by Manufacturing Technologies and Applications in İmalat Teknolojileri ve Uygulamaları
- Vol. 4 (1) , 49-58
Investigation of The Effect of Reduced Shank Thickness of Friction Welded Yoke Shaft on Strength
Usage of friction welding method on the joints provides many advantages such as cost reduction, weight reduction and higher quality. The yoke shaft produced by rotary friction welding (RFW) involves a yoked part and a hollow round bar which are welded to each other. And so, no additional drilling method used in the way of removing material from the centre of the yoke shaft, is required to reduce the weight. The weight is inherently reduced thanks to hollow round bar used in RFW method. It is possible to use a friction welded yoke shaft in a wide range of wall thickness by removing material from the shank diameter for different applications. At this point, the key factor is strength of the friction welded yoke shaft with reduced wall thickness on the shank diameter. The aim of this study is investigation the effect of the reduced wall thickness of a yoke shaft produced by RFW on the strength. For this purpose, yoke shafts were manufactured by using RFW and consecutive processes such as turning and millings to reduce the wall thickness. The specimens in different wall thickness were tested to determine the strength. Additionally finite element analyses (FEAs) were implemented for each variation of the specimens and compared with the test results. As a result, it was determined that yoke shafts with reduced wall thicknesses, which were produced by RFW and then consecutively machining operations to obtain a specific wall thickness, can be used in drive shaft manufacturing securely.
- 30 June 2022
- Published by Sakarya University Journal of Science in Sakarya University Journal of Science
- Vol. 26 (3) , 459-465
Investigation of The Effect of Design Variables on Slip Assembly: Spline Module and Slip Length
The driveshaft which transmits the power from the engine to the wheels in the motor vehicles is one of the vital elements in the driveline. Driveshafts have two basic motions depending on the road conditions, angular and axial movements. Angular movement is provided by the universal joints while the axial movement is provided by the slip assembly which involves a group of sliding components. Therefore, the slip assembly is an important part of the drive shaft. Basically, a slip assembly consists of two parts which are connected to each other by means of their spline forms. The parts can move back and forth longitudinally while they transmit the torque thanks to the connection interface of their spline forms. And so, they can slide and adjust the drive shaft lengths due to the position of the axles under road conditions. During the motor vehicle movement, slip assembly are subjected to torsion like the other components on the driveshaft. In this context, spline size and magnitude of the length compensation are highly important in the design process of the slip assembly. In this study, the effect of the spline size and the slip length have been investigated for the yoke shaft design, by using analytical and numerical methods in terms of shear stress. It has been observed that the analytical and the numerical methods give the similar results in shear stress on the pitch diameter of the spline. Thus, the analytical method can be preferred instead of the finite element analysis (FEA), especially considering that the FEA is a time consuming method compared to the analytical method in the design process.
- 30 June 2022
- Published by Sakarya University Journal of Science in Sakarya University Journal of Science
- Vol. 26 (3) , 459-465
Investigation of The Effect of Design Variables on Slip Assembly: Spline Module and Slip Length
The driveshaft which transmits the power from the engine to the wheels in the motor vehicles is one of the vital elements in the driveline. Driveshafts have two basic motions depending on the road conditions, angular and axial movements. Angular movement is provided by the universal joints while the axial movement is provided by the slip assembly which involves a group of sliding components. Therefore, the slip assembly is an important part of the drive shaft. Basically, a slip assembly consists of two parts which are connected to each other by means of their spline forms. The parts can move back and forth longitudinally while they transmit the torque thanks to the connection interface of their spline forms. And so, they can slide and adjust the drive shaft lengths due to the position of the axles under road conditions. During the motor vehicle movement, slip assembly are subjected to torsion like the other components on the driveshaft. In this context, spline size and magnitude of the length compensation are highly important in the design process of the slip assembly. In this study, the effect of the spline size and the slip length have been investigated for the yoke shaft design, by using analytical and numerical methods in terms of shear stress. It has been observed that the analytical and the numerical methods give the similar results in shear stress on the pitch diameter of the spline. Thus, the analytical method can be preferred instead of the finite element analysis (FEA), especially considering that the FEA is a time consuming method compared to the analytical method in the design process.
- Open Access
- 26 June 2022
- Published by European Mechanical Science in European Mechanical Science
- Vol. 6 (2) , 83-89
Analytical investigation of a new approach to calculation for effective length of the rolling element used in closed end needle roller bearings of driveshaft
The presence of the oscillating motion in a mechanical system, is vital in terms of the service life. Because the machine elements are under effect of fatigue due to the oscillating motion. The service life of the bearings which are in the forefront among the machine elements subjected to oscillating motion, can be calculated via an equation that depends on several variables, one of which is basic dynamic load rating (C). In this context, basic dynamic load rating (C) is one of the most important factors on estimating the service life. One of where bearing applications used in, is universal joint of driveshaft. A bearing on a universal joint consists of needle roller elements having larger contact area compared to the ball elements. Universal joint bearing is mounted in a bore on a component called yoke part, and so yoke part supports the bearing. In the calculation of basic dynamic load rating for universal joint bearing, effective length of the rolling element is the key factor. In this paper, a new approach to determine the effective length of rolling element used in closed end needle roller bearings of driveshaft has been investigated analytically and the effect of the said approach on the basic dynamic load rating and bearing life has been revealed in terms of ISO 281.
- 26 June 2022
- Published by European Mechanical Science in European Mechanical Science
- Vol. 6 (2) , 83-89
Open AccessAnalytical investigation of a new approach to calculation for effective length of the rolling element used in closed end needle roller bearings of driveshaft
The presence of the oscillating motion in a mechanical system, is vital in terms of the service life. Because the machine elements are under effect of fatigue due to the oscillating motion. The service life of the bearings which are in the forefront among the machine elements subjected to oscillating motion, can be calculated via an equation that depends on several variables, one of which is basic dynamic load rating (C). In this context, basic dynamic load rating (C) is one of the most important factors on estimating the service life. One of where bearing applications used in, is universal joint of driveshaft. A bearing on a universal joint consists of needle roller elements having larger contact area compared to the ball elements. Universal joint bearing is mounted in a bore on a component called yoke part, and so yoke part supports the bearing. In the calculation of basic dynamic load rating for universal joint bearing, effective length of the rolling element is the key factor. In this paper, a new approach to determine the effective length of rolling element used in closed end needle roller bearings of driveshaft has been investigated analytically and the effect of the said approach on the basic dynamic load rating and bearing life has been revealed in terms of ISO 281.
- 31 December 2020
- Published by International Journal of Automotive Science and Technology in International Journal of Automotive Science And Technology
- Vol. 4 (4) , 248-252
Structural Analysis of Yoke Part in Design of Driveshaft
Driveshaft used for transmitting torque and rotation, is one of the most important components in motor vehicles. It is required to connect the other components of the drivetrain such as transmission and differential to each other. Basically, comprises of one or more universal joints, yoke parts, splined parts and sometime center support bearing. Each compo-nent on it performs different functions such as angular and axial move-ment. Every component on driveshaft are subjected to torsion and shear stress. Thus, in the design and analysis processes each component should be sufficiently strong against to these all. In this study, numerical and an-alytical methods to design the weld yoke, were investigated and com-pared with each other. In the numerical studies finite element analysis (FEA) implemented by using two different loading conditions, force cou-ple and moment. And the strength formulas were used in the scope of an-alytical method. As a result of the study, the stress on critical section ob-tained from FEA, supports the results from analytical method. Thus, ana-lytical method can be used for the weld yoke design and the FEA can be implemented by using any of force couple or moment as loading type.
- 31 December 2020
- Published by International Journal of Automotive Science and Technology in International Journal of Automotive Science And Technology
- Vol. 4 (4) , 248-252
Structural Analysis of Yoke Part in Design of Driveshaft
Driveshaft used for transmitting torque and rotation, is one of the most important components in motor vehicles. It is required to connect the other components of the drivetrain such as transmission and differential to each other. Basically, comprises of one or more universal joints, yoke parts, splined parts and sometime center support bearing. Each compo-nent on it performs different functions such as angular and axial move-ment. Every component on driveshaft are subjected to torsion and shear stress. Thus, in the design and analysis processes each component should be sufficiently strong against to these all. In this study, numerical and an-alytical methods to design the weld yoke, were investigated and com-pared with each other. In the numerical studies finite element analysis (FEA) implemented by using two different loading conditions, force cou-ple and moment. And the strength formulas were used in the scope of an-alytical method. As a result of the study, the stress on critical section ob-tained from FEA, supports the results from analytical method. Thus, ana-lytical method can be used for the weld yoke design and the FEA can be implemented by using any of force couple or moment as loading type.