Shuolong Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shuolong Chen has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Xingxing Li
Wuhan University
16 shared publications - Shengyu Li
Wuhan University
14 shared publications - Yuxuan Zhou
School of Geodesy and Geomatics, Wuhan University, Wuhan, China
13 shared publications - Shiwen Wang
School of Geodesy and Geomatics, Wuhan University, Wuhan, China
8 shared publications - Liu Yuan
School of Geodesy and Geomatics (SGG), Wuhan University (WHU), Wuhan, China
2 shared publications - Xiaoteng Yang
School of Geodesy and Geomatics (SGG), Wuhan University, Wuhan, China
2 shared publications
Latest Publications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 31 (5) , 5222-5233
IEI-Calib: Improved Event Camera/IMU Rotational and Temporal Calibration With a Coarse-to-Fine Solution
Recently, bio-inspired event cameras have gained widespread attention in visual-inertial systems due to their superior temporal resolution and lower latency compared to standard frame-based cameras. As a prerequisite, accurate spatiotemporal calibration is essential for the practical applications of these systems. In our previous work, the rotational and temporal parameters between event camera and inertial measurement unit (IMU) are determined by directly aligning IMU and event camera-derived angular velocity sequences. However, the final calibration performance is limited and sensitive to the potential outliers. To address this issue, we propose IEI-Calib, an improved spatiotemporal calibration framework for event camera and IMU, which employed a coarse-to-fine mechanism to enhance the calibration accuracy and consistency. Specifically, the preliminary estimates are obtained by aligning IMU gyroscope measurements and event camera angular velocities in closed form. On this basis, they are refined by tightly coupling contrast maximization with continuous-time trajectory in consecutive sliding windows with overlapping time domains. The proposed method has been validated through extensive experiments, demonstrating superior performance compared to its predecessor.
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 31 (5) , 5222-5233
IEI-Calib: Improved Event Camera/IMU Rotational and Temporal Calibration With a Coarse-to-Fine Solution
Recently, bio-inspired event cameras have gained widespread attention in visual-inertial systems due to their superior temporal resolution and lower latency compared to standard frame-based cameras. As a prerequisite, accurate spatiotemporal calibration is essential for the practical applications of these systems. In our previous work, the rotational and temporal parameters between event camera and inertial measurement unit (IMU) are determined by directly aligning IMU and event camera-derived angular velocity sequences. However, the final calibration performance is limited and sensitive to the potential outliers. To address this issue, we propose IEI-Calib, an improved spatiotemporal calibration framework for event camera and IMU, which employed a coarse-to-fine mechanism to enhance the calibration accuracy and consistency. Specifically, the preliminary estimates are obtained by aligning IMU gyroscope measurements and event camera angular velocities in closed form. On this basis, they are refined by tightly coupling contrast maximization with continuous-time trajectory in consecutive sliding windows with overlapping time domains. The proposed method has been validated through extensive experiments, demonstrating superior performance compared to its predecessor.
- 11 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-16
River2: A Tightly Coupled Multiradar Multi-IMU Velocity Estimator Based on Continuous-Time Optimization
This article presents River2, a tightly coupled multi-radar and multi-IMU velocity estimation framework based on continuous-time optimization. By utilizing a robust map-free estimation approach, River2 introduces two major innovations to enable more robust and precise fusion of ego-velocity estimates in multi-sensor systems. The first innovation extends both the initialization state and batch estimation procedures to a multi-sensor framework. This allows for the continuous estimation of body-frame velocity by optimizing velocity and rotation B-splines, even in the event of a single sensor fault, significantly enhancing system robustness and resilience to interference. The use of multiple radars expands the field of view, further enhancing the system’s robustness. The second innovation incorporates flexible outlier removal and zero-velocity update strategies into the system, improving its ability to operate continuously and accurately in complex environments. Experiments on simulations, open-source data, and our own collected datasets demonstrate that River2 exhibits high accuracy, robustness, and continuity in ego-velocity estimation, validating the effectiveness of the algorithm across diverse scenarios. We open-source our implementations at (https://github.com/xtyang16/River2) to benefit the research community.
- 11 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-16
River2: A Tightly Coupled Multiradar Multi-IMU Velocity Estimator Based on Continuous-Time Optimization
This article presents River2, a tightly coupled multi-radar and multi-IMU velocity estimation framework based on continuous-time optimization. By utilizing a robust map-free estimation approach, River2 introduces two major innovations to enable more robust and precise fusion of ego-velocity estimates in multi-sensor systems. The first innovation extends both the initialization state and batch estimation procedures to a multi-sensor framework. This allows for the continuous estimation of body-frame velocity by optimizing velocity and rotation B-splines, even in the event of a single sensor fault, significantly enhancing system robustness and resilience to interference. The use of multiple radars expands the field of view, further enhancing the system’s robustness. The second innovation incorporates flexible outlier removal and zero-velocity update strategies into the system, improving its ability to operate continuously and accurately in complex environments. Experiments on simulations, open-source data, and our own collected datasets demonstrate that River2 exhibits high accuracy, robustness, and continuity in ego-velocity estimation, validating the effectiveness of the algorithm across diverse scenarios. We open-source our implementations at (https://github.com/xtyang16/River2) to benefit the research community.
- 3 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-11
MI-Odometry: Real-Time Attitude Estimation of Multiple IMUs With Online Spatiotemporal Calibration
Nowadays, micro-electromechanical systems (MEMS) Inertial Measurement Units (IMUs) have gained significant attention in both academia and industry areas due to the advanced development in circuit manufacturing technology. Benefiting from these technological advancements, it is natural to fuse multiple low-cost and miniaturized MEMS-IMUs to overcome the error accumulation of a single IMU. However, existing methods generally rely on known spatiotemporal parameters or specific assumptions. To fill this up, we propose a real-time attitude estimation method termed MI-Odometry that only uses randomly distributed IMUs. Meanwhile, a coarse-to-fine online calibration approach is also proposed to eliminate the need of exhaustive offline spatiotemporal calibration without using any prior knowledge. The proposed method is extensively evaluated in both simulation and real-world experiments to validate its effectiveness and superiority over state-of-the-art methods. The source code are available at https://github.com/GREAT-WHU/MI-Odom to benefit the research community.
- 3 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-11
MI-Odometry: Real-Time Attitude Estimation of Multiple IMUs With Online Spatiotemporal Calibration
Nowadays, micro-electromechanical systems (MEMS) Inertial Measurement Units (IMUs) have gained significant attention in both academia and industry areas due to the advanced development in circuit manufacturing technology. Benefiting from these technological advancements, it is natural to fuse multiple low-cost and miniaturized MEMS-IMUs to overcome the error accumulation of a single IMU. However, existing methods generally rely on known spatiotemporal parameters or specific assumptions. To fill this up, we propose a real-time attitude estimation method termed MI-Odometry that only uses randomly distributed IMUs. Meanwhile, a coarse-to-fine online calibration approach is also proposed to eliminate the need of exhaustive offline spatiotemporal calibration without using any prior knowledge. The proposed method is extensively evaluated in both simulation and real-world experiments to validate its effectiveness and superiority over state-of-the-art methods. The source code are available at https://github.com/GREAT-WHU/MI-Odom to benefit the research community.
- 10 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (11) , 11435-11442
eKalibr-Stereo: Continuous-Time Spatiotemporal Calibration for Event-Based Stereo Visual Systems
The bioinspired event camera, distinguished by its exceptional temporal resolution, high dynamic range, and low power consumption, has been extensively studied in recent years for motion estimation, robotic perception, and object detection. In ego-motion estimation, the stereo event camera setup is commonly adopted due to its direct scale perception and depth recovery. For optimal stereo visual fusion, accurate spatiotemporal (extrinsic and temporal) calibration is required. In this letter, we present eKalibr-Stereo, an accurate spatiotemporal calibrator for event-based stereo visual systems, utilizing the widely used circular grid board. To ensure the continuity of grid pattern tracking, building upon the grid pattern recognition method in eKalibr, an additional motion prior-based tracking module is designed in eKalibr-Stereo to track incomplete grid patterns. Based on tracked grid patterns, a two-step initialization procedure is performed to recover initial guesses of piece-wise B-splines and spatiotemporal parameters, followed by a continuous-time batch bundle adjustment to refine the initialized states to optimal ones. The results of extensive real-world experiments show that eKalibr-Stereo can achieve accurate event-based stereo spatiotemporal calibration. The implementation of eKalibr-Stereo is open-sourced at https://github.com/Unsigned-Long/eKalibr to benefit the research community.
- 10 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (11) , 11435-11442
eKalibr-Stereo: Continuous-Time Spatiotemporal Calibration for Event-Based Stereo Visual Systems
The bioinspired event camera, distinguished by its exceptional temporal resolution, high dynamic range, and low power consumption, has been extensively studied in recent years for motion estimation, robotic perception, and object detection. In ego-motion estimation, the stereo event camera setup is commonly adopted due to its direct scale perception and depth recovery. For optimal stereo visual fusion, accurate spatiotemporal (extrinsic and temporal) calibration is required. In this letter, we present eKalibr-Stereo, an accurate spatiotemporal calibrator for event-based stereo visual systems, utilizing the widely used circular grid board. To ensure the continuity of grid pattern tracking, building upon the grid pattern recognition method in eKalibr, an additional motion prior-based tracking module is designed in eKalibr-Stereo to track incomplete grid patterns. Based on tracked grid patterns, a two-step initialization procedure is performed to recover initial guesses of piece-wise B-splines and spatiotemporal parameters, followed by a continuous-time batch bundle adjustment to refine the initialized states to optimal ones. The results of extensive real-world experiments show that eKalibr-Stereo can achieve accurate event-based stereo spatiotemporal calibration. The implementation of eKalibr-Stereo is open-sourced at https://github.com/Unsigned-Long/eKalibr to benefit the research community.
- 23 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (7) , 7094-7101
eKalibr: Dynamic Intrinsic Calibration for Event Cameras From First Principles of Events
The bio-inspired event camera has garnered extensive research attention in recent years, owing to its significant potential derived from its high dynamic range and low latency characteristics. Similar to the standard camera, the event camera requires precise intrinsic calibration to facilitate further high-level visual applications, such as pose estimation and mapping. While several calibration methods for event cameras have been proposed, most of them are either ($i$) engineering-driven, heavily relying on conventional image-based calibration pipelines, or ($ii$) inconvenient, requiring complex instrumentation. To this end, we propose an accurate and convenient intrinsic calibration method for event cameras, named eKalibr, which builds upon a carefully designed event-based circle grid pattern recognition algorithm. To extract target patterns from events, we perform event-based normal flow estimation to identify potential events generated by circle edges, and cluster them spatially. Subsequently, event clusters associated with the same grid circles are matched and grouped using normal flows, for subsequent time-varying ellipse estimation. Fitted ellipse centers are time-synchronized, for final grid pattern recognition. We conducted extensive experiments to evaluate the performance of eKalibr in terms of pattern extraction and intrinsic calibration.
- 23 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (7) , 7094-7101
eKalibr: Dynamic Intrinsic Calibration for Event Cameras From First Principles of Events
The bio-inspired event camera has garnered extensive research attention in recent years, owing to its significant potential derived from its high dynamic range and low latency characteristics. Similar to the standard camera, the event camera requires precise intrinsic calibration to facilitate further high-level visual applications, such as pose estimation and mapping. While several calibration methods for event cameras have been proposed, most of them are either ($i$) engineering-driven, heavily relying on conventional image-based calibration pipelines, or ($ii$) inconvenient, requiring complex instrumentation. To this end, we propose an accurate and convenient intrinsic calibration method for event cameras, named eKalibr, which builds upon a carefully designed event-based circle grid pattern recognition algorithm. To extract target patterns from events, we perform event-based normal flow estimation to identify potential events generated by circle edges, and cluster them spatially. Subsequently, event clusters associated with the same grid circles are matched and grouped using normal flows, for subsequent time-varying ellipse estimation. Fitted ellipse centers are time-synchronized, for final grid pattern recognition. We conducted extensive experiments to evaluate the performance of eKalibr in terms of pattern extraction and intrinsic calibration.
- 12 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
Rotation and Temporal Calibration of Event Camera and IMU Based on Contrast Maximization
In recent years, camera-IMU sensor suite has garnered significant attention in robotics, augmented reality (AR) and self-driving communities due to its lightweight design and compact footprint. However, traditional frame-based cameras exhibit inherent limitations such as sensing latency and low dynamic range, motivating us to incorporate novel event cameras for enhanced completeness and robustness. As a prerequisite for robust motion estimation, existing event camera-IMU calibration methods generally rely on recovered standard frame images and artificial targets to facilitate spatiotemporal calibration, rendering them not flexible enough and labor-intensive. To address this issue, we propose a targetless rotational and temporal calibration method for event camera and IMU based on contrast maximization. This method directly leverages raw asynchronous event streams without the necessity for complicated manual initialization or prior knowledge. Specifically, a sliding window mechanism is first designed to estimate event camera angular velocity within a short time period. Based on the continuous-time representation, the IMU gyroscope and event camera angular velocity factors are jointly minimized to optimize the spatiotemporal parameters. The real-world experiments conducted in both public and self-collected datasets demonstrate that the proposed method can achieve comparable calibration accuracy against state-of-the-art target-based calibration methods. To benefit the research community, we open source the code and collected data at https://github.com/GREAT-WHU/RTEI-Calib.
- 12 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
Rotation and Temporal Calibration of Event Camera and IMU Based on Contrast Maximization
In recent years, camera-IMU sensor suite has garnered significant attention in robotics, augmented reality (AR) and self-driving communities due to its lightweight design and compact footprint. However, traditional frame-based cameras exhibit inherent limitations such as sensing latency and low dynamic range, motivating us to incorporate novel event cameras for enhanced completeness and robustness. As a prerequisite for robust motion estimation, existing event camera-IMU calibration methods generally rely on recovered standard frame images and artificial targets to facilitate spatiotemporal calibration, rendering them not flexible enough and labor-intensive. To address this issue, we propose a targetless rotational and temporal calibration method for event camera and IMU based on contrast maximization. This method directly leverages raw asynchronous event streams without the necessity for complicated manual initialization or prior knowledge. Specifically, a sliding window mechanism is first designed to estimate event camera angular velocity within a short time period. Based on the continuous-time representation, the IMU gyroscope and event camera angular velocity factors are jointly minimized to optimize the spatiotemporal parameters. The real-world experiments conducted in both public and self-collected datasets demonstrate that the proposed method can achieve comparable calibration accuracy against state-of-the-art target-based calibration methods. To benefit the research community, we open source the code and collected data at https://github.com/GREAT-WHU/RTEI-Calib.
- Top Cited Papers
- 21 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 41 (15523098) , 1618-1638
iKalibr: Unified Targetless Spatiotemporal Calibration for Resilient Integrated Inertial Systems
The integrated inertial system, typically integrating an IMU and an exteroceptive sensor such as radar, LiDAR, and camera, has been widely accepted and applied in modern robotic applications for ego-motion estimation, motion control, or autonomous exploration. To improve system accuracy, robustness, and further usability, both multiple and various sensors are generally resiliently integrated, which benefits the system performance regarding failure tolerance, perception capability, and environment compatibility. For such systems, accurate and consistent spatiotemporal calibration is required to maintain a unique spatiotemporal framework for multi-sensor fusion. Considering that most existing calibration methods (i) are generally oriented to specific integrated inertial systems, (ii) often focus on spatial-only determination, (iii) usually require artificial targets, lacking convenience and usability, we propose iKalibr: a unified targetless spatiotemporal calibration framework for resilient integrated inertial systems, which overcomes the above issues, and enables both accurate and consistent calibration. Altogether four commonly employed sensors are supported in iKalibr currently, namely IMU, radar, LiDAR, and camera. The proposed method starts with a rigorous and efficient dynamic initialization, where all parameters in the estimator would be accurately recovered. Subsequently, several continuous-time batch optimizations are conducted to refine the initialized parameters toward better states. Sufficient real-world experiments were conducted to verify the feasibility and evaluate the calibration performance of iKalibr. The results demonstrate that iKalibr can achieve accurate resilient spatiotemporal calibration. We open-source our implementations at (https://github.com/Unsigned-Long/iKalibr) to benefit the research community.
- 21 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 41 (15523098) , 1618-1638
Top Cited PapersiKalibr: Unified Targetless Spatiotemporal Calibration for Resilient Integrated Inertial Systems
The integrated inertial system, typically integrating an IMU and an exteroceptive sensor such as radar, LiDAR, and camera, has been widely accepted and applied in modern robotic applications for ego-motion estimation, motion control, or autonomous exploration. To improve system accuracy, robustness, and further usability, both multiple and various sensors are generally resiliently integrated, which benefits the system performance regarding failure tolerance, perception capability, and environment compatibility. For such systems, accurate and consistent spatiotemporal calibration is required to maintain a unique spatiotemporal framework for multi-sensor fusion. Considering that most existing calibration methods (i) are generally oriented to specific integrated inertial systems, (ii) often focus on spatial-only determination, (iii) usually require artificial targets, lacking convenience and usability, we propose iKalibr: a unified targetless spatiotemporal calibration framework for resilient integrated inertial systems, which overcomes the above issues, and enables both accurate and consistent calibration. Altogether four commonly employed sensors are supported in iKalibr currently, namely IMU, radar, LiDAR, and camera. The proposed method starts with a rigorous and efficient dynamic initialization, where all parameters in the estimator would be accurately recovered. Subsequently, several continuous-time batch optimizations are conducted to refine the initialized parameters toward better states. Sufficient real-world experiments were conducted to verify the feasibility and evaluate the calibration performance of iKalibr. The results demonstrate that iKalibr can achieve accurate resilient spatiotemporal calibration. We open-source our implementations at (https://github.com/Unsigned-Long/iKalibr) to benefit the research community.
- 25 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-11
RIs-Calib: An Open-Source Spatiotemporal Calibrator for Multiple 3-D Radars and IMUs Based on Continuous-Time Estimation
Aided inertial navigation system (INS), typically consisting of an inertial measurement unit (IMU) and an exteroceptive sensor, has been widely accepted as a feasible solution for navigation. Compared with vision-aided and LiDAR-aided INS, radar-aided INS could achieve better performance in adverse weather conditions since the radar utilizes low-frequency measuring signals with less attenuation effect in atmospheric gases and rain. For such a radar-aided INS, accurate spatiotemporal transformation is a fundamental prerequisite to achieving optimal information fusion. In this work, we present RIs-Calib : a spatiotemporal calibrator for multiple 3D radars and IMUs based on continuous-time estimation, which enables accurate spatiotemporal calibration and does not require any additional artificial infrastructure or prior knowledge. Our approach starts with a rigorous initialization procedure to recover spatiotemporal parameters and kinematic B-splines of the sensor suite from the raw measurements. Following that, several batch optimizations would be conducted, where all parameters would be refined to global optimal states steadily. We validate and evaluate RIs-Calib on both simulated and real-world experiments, and the results demonstrate that RIs-Calib is capable of accurate and consistent calibration. We open-source our implementations at (https://github.com/Unsigned-Long/RIs-Calib) to benefit the research community.
- 25 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-11
RIs-Calib: An Open-Source Spatiotemporal Calibrator for Multiple 3-D Radars and IMUs Based on Continuous-Time Estimation
Aided inertial navigation system (INS), typically consisting of an inertial measurement unit (IMU) and an exteroceptive sensor, has been widely accepted as a feasible solution for navigation. Compared with vision-aided and LiDAR-aided INS, radar-aided INS could achieve better performance in adverse weather conditions since the radar utilizes low-frequency measuring signals with less attenuation effect in atmospheric gases and rain. For such a radar-aided INS, accurate spatiotemporal transformation is a fundamental prerequisite to achieving optimal information fusion. In this work, we present RIs-Calib : a spatiotemporal calibrator for multiple 3D radars and IMUs based on continuous-time estimation, which enables accurate spatiotemporal calibration and does not require any additional artificial infrastructure or prior knowledge. Our approach starts with a rigorous initialization procedure to recover spatiotemporal parameters and kinematic B-splines of the sensor suite from the raw measurements. Following that, several batch optimizations would be conducted, where all parameters would be refined to global optimal states steadily. We validate and evaluate RIs-Calib on both simulated and real-world experiments, and the results demonstrate that RIs-Calib is capable of accurate and consistent calibration. We open-source our implementations at (https://github.com/Unsigned-Long/RIs-Calib) to benefit the research community.
- 21 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (1) , 80-87
iKalibr-RGBD: Partially-Specialized Target-Free Visual-Inertial Spatiotemporal Calibration for RGBDs via Continuous-Time Velocity Estimation
Visual-inertial systems have been widely studied and applied in the last two decades (from the early 2000s to the present), mainly due to their low cost and power consumption, small footprint, and high availability. Such a trend simultaneously leads to a large amount of visual-inertial calibration methods being presented, as accurate spatiotemporal parameters between sensors are essential for visual-inertial fusion. In our previous work, i.e., iKalibr , a continuous-time-based visual-inertial calibration method was proposed as a part of one-shot multi-sensor resilient spatiotemporal calibration. While requiring no artificial calibration target brings considerable convenience, computationally expensive pose estimation is demanded in initialization and batch optimization, limiting its availability. Fortunately, this can be vastly improved for the RGBDs with additional depth information, by employing mapping-free ego-velocity estimation instead of mapping-based pose estimation. In this paper, we present an ego-velocity-estimation-based RGBD-inertial spatiotemporal calibrator, termed as iKalibr-RGBD , which is also targetless and continuous-time-based, but computationally efficient. The general pipeline of iKalibr-RGBD is inherited from iKalibr , composed of a rigorous initialization procedure and several continuous-time batch optimizations. The implementation of iKalibr-RGBD is open-sourced at ( https://github.com/Unsigned-Long/iKalibr ) to benefit the research community.
- 21 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (1) , 80-87
iKalibr-RGBD: Partially-Specialized Target-Free Visual-Inertial Spatiotemporal Calibration for RGBDs via Continuous-Time Velocity Estimation
Visual-inertial systems have been widely studied and applied in the last two decades (from the early 2000s to the present), mainly due to their low cost and power consumption, small footprint, and high availability. Such a trend simultaneously leads to a large amount of visual-inertial calibration methods being presented, as accurate spatiotemporal parameters between sensors are essential for visual-inertial fusion. In our previous work, i.e., iKalibr , a continuous-time-based visual-inertial calibration method was proposed as a part of one-shot multi-sensor resilient spatiotemporal calibration. While requiring no artificial calibration target brings considerable convenience, computationally expensive pose estimation is demanded in initialization and batch optimization, limiting its availability. Fortunately, this can be vastly improved for the RGBDs with additional depth information, by employing mapping-free ego-velocity estimation instead of mapping-based pose estimation. In this paper, we present an ego-velocity-estimation-based RGBD-inertial spatiotemporal calibrator, termed as iKalibr-RGBD , which is also targetless and continuous-time-based, but computationally efficient. The general pipeline of iKalibr-RGBD is inherited from iKalibr , composed of a rigorous initialization procedure and several continuous-time batch optimizations. The implementation of iKalibr-RGBD is open-sourced at ( https://github.com/Unsigned-Long/iKalibr ) to benefit the research community.
- 27 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (24) , 40306-40318
Continuous-Time LiDAR/IMU/Radar Odometry for Accurate and Smooth State Estimation via Tightly Coupled Integration
For advanced autonomous systems, precise and consistent ego-motion estimation is critical to ensure system safety and performant closed-loop control. Unfortunately, traditional discrete-time approaches generally rely on interpolation to fuse asynchronous measurements, which would inevitably lose accuracy in high-speed motions. To this end, we propose a tightly coupled LiDAR/IMU/Radar odometry tailored for accurate and smooth state estimation using continuous-time trajectory optimization. Specifically, a novel coarse-to-fine dynamic initialization method is first proposed to obtain system states, IMU biases, and optional intersensor spatiotemporal parameters without requiring specific artificial targets and movements. After performing data association for LiDAR scans and outlier removal for Radar scans, LiDAR point-to-plane factor, angular velocity factor, linear acceleration factor, and Radar Doppler velocity factor are jointly minimized in a factor graph framework to derive optimal estimates. A series of dedicated experiments on the real-world data sets were conducted to evaluate the proposed method. The results demonstrate that the proposed method exhibits superior navigation performance in complex environments than the state-of-the-art methods in terms of position, velocity, and attitude.
- 27 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (24) , 40306-40318
Continuous-Time LiDAR/IMU/Radar Odometry for Accurate and Smooth State Estimation via Tightly Coupled Integration
For advanced autonomous systems, precise and consistent ego-motion estimation is critical to ensure system safety and performant closed-loop control. Unfortunately, traditional discrete-time approaches generally rely on interpolation to fuse asynchronous measurements, which would inevitably lose accuracy in high-speed motions. To this end, we propose a tightly coupled LiDAR/IMU/Radar odometry tailored for accurate and smooth state estimation using continuous-time trajectory optimization. Specifically, a novel coarse-to-fine dynamic initialization method is first proposed to obtain system states, IMU biases, and optional intersensor spatiotemporal parameters without requiring specific artificial targets and movements. After performing data association for LiDAR scans and outlier removal for Radar scans, LiDAR point-to-plane factor, angular velocity factor, linear acceleration factor, and Radar Doppler velocity factor are jointly minimized in a factor graph framework to derive optimal estimates. A series of dedicated experiments on the real-world data sets were conducted to evaluate the proposed method. The results demonstrate that the proposed method exhibits superior navigation performance in complex environments than the state-of-the-art methods in terms of position, velocity, and attitude.