SWShiwen Wang

Shiwen Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shiwen Wang has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • RIs-Calib: An Open-Source Spatiotemporal Calibrator for Multiple 3-D Radars and IMUs Based on Continuous-Time Estimation

    by Shuolong Chen, Xingxing Li, Shengyu Li, Yuxuan Zhou, Shiwen Wang

    Aided inertial navigation system (INS), typically consisting of an inertial measurement unit (IMU) and an exteroceptive sensor, has been widely accepted as a feasible solution for navigation. Compared with vision-aided and LiDAR-aided INS, radar-aided INS could achieve better performance in adverse weather conditions since the radar utilizes low-frequency measuring signals with less attenuation effect in atmospheric gases and rain. For such a radar-aided INS, accurate spatiotemporal transformation is a fundamental prerequisite to achieving optimal information fusion. In this work, we present RIs-Calib : a spatiotemporal calibrator for multiple 3D radars and IMUs based on continuous-time estimation, which enables accurate spatiotemporal calibration and does not require any additional artificial infrastructure or prior knowledge. Our approach starts with a rigorous initialization procedure to recover spatiotemporal parameters and kinematic B-splines of the sensor suite from the raw measurements. Following that, several batch optimizations would be conducted, where all parameters would be refined to global optimal states steadily. We validate and evaluate RIs-Calib on both simulated and real-world experiments, and the results demonstrate that RIs-Calib is capable of accurate and consistent calibration. We open-source our implementations at (https://github.com/Unsigned-Long/RIs-Calib) to benefit the research community.


  • Continuous-Time LiDAR/IMU/Radar Odometry for Accurate and Smooth State Estimation via Tightly Coupled Integration

    by Shengyu Li, Xingxing Li, Shuolong Chen, Yuxuan Zhou, Shiwen Wang

    For advanced autonomous systems, precise and consistent ego-motion estimation is critical to ensure system safety and performant closed-loop control. Unfortunately, traditional discrete-time approaches generally rely on interpolation to fuse asynchronous measurements, which would inevitably lose accuracy in high-speed motions. To this end, we propose a tightly coupled LiDAR/IMU/Radar odometry tailored for accurate and smooth state estimation using continuous-time trajectory optimization. Specifically, a novel coarse-to-fine dynamic initialization method is first proposed to obtain system states, IMU biases, and optional intersensor spatiotemporal parameters without requiring specific artificial targets and movements. After performing data association for LiDAR scans and outlier removal for Radar scans, LiDAR point-to-plane factor, angular velocity factor, linear acceleration factor, and Radar Doppler velocity factor are jointly minimized in a factor graph framework to derive optimal estimates. A series of dedicated experiments on the real-world data sets were conducted to evaluate the proposed method. The results demonstrate that the proposed method exhibits superior navigation performance in complex environments than the state-of-the-art methods in terms of position, velocity, and attitude.


  • MI-Calib: An Open-Source Spatiotemporal Calibrator for Multiple IMUs Based on Continuous-Time Batch Optimization

    by Shuolong Chen, Xingxing Li, Shengyu Li, Yuxuan Zhou, Shiwen Wang

    The inertial measurement unit (IMU), as an interoceptive sensor typically providing high-frequency angular velocity and specific force measurements, has been widely exploited for accurate motion estimation in modern robotic applications, such as autonomous navigation and exploration. Recently, there has been a trend of integrating multiple IMUs in inertial systems, which outperforms traditional standalone ones regarding the resiliency of sensor failures and measurement depletion and is commercially affordable due to the significantly reduced price for IMUs. For such multi-IMU systems, accurate and consistent spatiotemporal calibration is inevitably required to perform information fusion in a unified framework. Considering most existing methods generally involve additional aiding sensors in calibration, lacking convenience and usability, we propose MI-Calib : a high-performance multi-IMU spatiotemporal calibrator based on continuous-time batch optimization, which utilizes only raw inertial measurements from multiple IMUs and requires no prior. In particular, a rigorous multi-stage initialization procedure is first conducted to recover initial guesses of parameters, followed by a batch optimization, where all states would be refined to global optimal ones. Results from both simulated and real-world experiments demonstrate the high accuracy and consistency of MI-Calib . We open-source our implementations at ( https://github.com/Unsigned-Long/MI-Calib ) to benefit the research community.


  • River: A Tightly-Coupled Radar-Inertial Velocity Estimator Based on Continuous-Time Optimization

    by Shuolong Chen, Xingxing Li, Shengyu Li, Yuxuan Zhou, Shiwen Wang

    Continuous and reliable ego-velocity information is significant for high-performance motion control and planning in a variety of robotic tasks, such as autonomous navigation and exploration. While linear velocities as first-order kinematics can be simultaneously estimated with other states or explicitly obtained by differentiation from positions in ego-motion estimators such as odometers, the high coupling leads to instability and even failures when estimators degenerate. To this end, we present River: an accurate and continuous linear velocity estimator that efficiently fuses high-frequency inertial and radar target measurements based on continuous-time optimization. Specifically, a dynamic initialization procedure is first performed to rigorously recover the initials of states, followed by batch estimations, where the velocity and rotation B-splines would be optimized incrementally to provide continuous body-frame velocity estimates. Results from both simulated and real-world experiments demonstrate that River is capable of high accuracy, repeatability, and consistency for ego-velocity estimation.


  • Targetless Spatiotemporal Calibration of Multi-LiDAR Multi-IMU System Based on Continuous-Time Optimization

    by Shengyu Li, Xingxing Li, Shuolong Chen, Yuxuan Zhou, Shiwen Wang

    Nowadays, LiDAR-IMU systems have progressively prevailed in mobile robotic applications due to their excellent complementary characteristics. With the steady decline and shrinking in cost and size of these sensors, it has become feasible and even imperative to further leverage multiple sensor units for better accuracy and robustness. In such a fusion-based system, accurate spatiotemporal calibration is a fundamental prerequisite. However, existing calibration methods generally necessitate artificial targets or an overlapping field-of-view (FoV) between LiDARs. To this end, we propose an accurate and easy-to-use and spatiotemporal calibration approach tailored to multi-LiDAR multi-IMU systems based on continuous-time batch estimation, which supports both mechanical spinning LiDARs and small FoV solid-state LiDARs. Inspired by classical hand–eye calibration, a stepwise multistage nonlinear optimization problem is first built to recover the rotational extrinsic and poses of control points in the spline without using any artificial targets, special movements, or manual intervention. Meanwhile, a virtual IMU and LiDAR are constructed to bridge all IMUs and LiDARs based on the centralized principles in both temporal and spatial domains. Subsequently, the point-to-plane factors associated by different LiDARs, gyroscope, and accelerometer factors are jointly minimized to optimize all spatiotemporal parameters over multiple batches. Extensive simulation tests and real-world experiments were conducted to quantitatively evaluate the feasibility of the proposed method. Meanwhile, the proposed method is compared with the state-of-the-art methods and shows superior calibration performance.


  • Targetless Spatiotemporal Calibration for Multiple Heterogeneous Cameras and IMUs Based on Continuous-Time Trajectory Estimation

    by Shuolong Chen, Xingxing Li, Shengyu Li, Yuxuan Zhou, Shiwen Wang

    Nowadays, visual-inertial systems have been extensively studied and applied in mobile robots and autonomous vehicles due to their small footprint, low cost, and excellent complementary characteristics. To further the robustness and accuracy of such systems, integrating multiple cameras and inertial measurement units (IMU) is a practically effective and commercially affordable choice. For such multi-sensor systems, accurate and consistent spatiotemporal calibration is a fundamental prerequisite. However, existing calibration methods generally require auxiliary artificial targets, as well as overlapping field-of-views between cameras, which significantly limits their usability. To this end, we propose a targetless spatiotemporal calibration method for multi-camera multi-IMU systems, which supports both global shutter (GS) and rolling shutter (RS) cameras, and enables intrinsic refinement. In particular, a novel continuous-time-based pre-integration initialization approach is developed for calibration initialization, which can easily be extended to estimator initialization of IMU-integrated multi-sensor systems. Following the initialization procedure, several batch optimizations are performed, where all spatiotemporal parameters can be optimized in a consistent estimator by introducing a virtual central IMU. Both simulation tests and real-world experiments were carried out for quantitative evaluation. The results demonstrate that the proposed method is capable of accurate and consistent spatiotemporal calibration and intrinsic refinement, and outperforms other state-of-the-art methods.


  • Accurate and Consistent Spatiotemporal Calibration for Heterogenous-Camera/ IMU/LiDAR System Based on Continuous-Time Batch Estimation

    by Xingxing Li, Shuolong Chen, Shengyu Li, Yuxuan Zhou, Shiwen Wang

    Nowadays, multisensor fusion, which could compensate for the deficiencies of stand-alone sensors, has been widely accepted as a feasible solution for navigation and perception tasks. To achieve optimal information fusion, accurate intersensor spatiotemporal transformation is a fundamental prerequisite. However, few existing calibration methods could accurately and flexibly calibrate spatiotemporal parameters for camera/inertial measurement unit (IMU)/light detection and ranging (LiDAR) sensor suites without relying on artificial targets and manual intervention, especially for those low-cost suites that employ rolling shutter (RS) cameras. To this end, building upon our previous work (i.e., two-step LiDAR-IMU-camera (LIC)-calib), we propose a spatiotemporal calibration method for heterogenous-camera/IMU/LiDAR systems, which supports both global shutter (GS) and RS cameras, and enables intrinsic refinement. In particular, a novel initialization method is developed to provide accurate initial guesses, requiring no prior knowledge or calibration infrastructure. To further improve the calibration consistency and accuracy, the split calibration of camera/IMU and LiDAR/IMU in two-step is unified into a global nonlinear optimization problem. Both simulated and real-world experiments were conducted for quantitative evaluation, and the results demonstrate that the proposed method outperforms its predecessor and other state-of-the-art methods.


  • Accuracy- and Simplicity-Oriented Self-Calibration Approach for In-Vehicle GNSS/INS/Vision System With Observability Analysis

    by Shengyu Li, Xingxing Li, Yuxuan Zhou, Shiwen Wang, Shuolong Chen

    With significant advances in manufacturing technology, multiple sensors such as global navigation satellite system (GNSS) devices, inertial measurement units (IMU) and cameras have become affordable in intelligent vehicle systems and are generally integrated for motion estimation and environmental perception. In such integrated systems, accurate and flexible sensor calibration is a basic foundation for optimal information fusion. However, traditional calibration methods are generally labor-intensive or only applicable to handheld platforms. To address this issue, we propose an accurate and plug-and-play self-calibration method for in-vehicle GNSS/inertial navigation system (INS)/Vision system. Without relying on specially-designed targets and initial guess of sensor setups, all involved sensing parameters, including GNSS-IMU and Camera-IMU spatial-temporal extrinsics, are properly initialized and estimated online via a centralized Extended Kalman Filter (EKF). Besides, an observability constrained module is also developed to address degradation cases through detailed observability analysis. The results in both Monte-Carlo simulations and real-world experiments indicate that the proposed method enables accurate online calibration of all spatiotemporal parameters involved in GNSS/INS/Vision systems and shows superior calibration performance over the state-of-the-art methods. Furthermore, for the first time, we prove the superiority of using raw GNSS observations to enhance camera-IMU calibration than using processed GNSS positions or not using any GNSS information.


  • Research on Simulation of Smart Grid Control Based on Embedded System

    by Chen Li, Ziheng Sheng, Weihong Wu, Yuxin Zhu, Shiwen Wang, Difei Xu

    From the perspective of the deployment and development of renewable energy in the world, wind power and solar power are currently the most widely used power generation technologies and have been rapidly developed and widely used. In order to mitigate the effects of randomness when intermittent power sources such as wind energy and solar energy are deployed in the grid on a large scale, which could influence the smart grid power generation scheduling, peak power, and frequency regulation and operation stability, this paper proposes a smart grid control theory based on embedded systems design, which could measure, track and control the operation of the smart grid in real-time, and intelligently control the transmission of electrical energy. It is reliable to analyze advanced control strategies in a relatively safe environment, to achieve stable operation of the grid-connected system, and to verify the correctness of the control method selection in terms of the collected experimental data. The experimental results show that the smart grid system and grid system stable operation, and the load regulation is less than 0.03%, the total harmonic distortion rate of the test AC bus voltage which exactly means total harmonic distortion is less than 0.03%, and the inverter efficiency is around 92%. The research results provide a reliable reference for system modeling, data processing, and control strategies, mitigate the contradiction between the smart grid and the power grid, and meet users' requirements for power consumption.