Erol Uzal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Erol Uzal has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Huseyin Yildiz
Istanbul University-Cerrahpasa
6 shared publications - Birkan Durak
İSTANBUL ÜNİVERSİTESİ-CERRAHPAŞA, TEKNİK BİLİMLER MESLEK YÜKSEKOKULU, MOTORLU ARAÇLAR VE ULAŞTIRMA TEKNOLOJİLERİ BÖLÜMÜ, UÇAK TEKNOLOJİSİ PR
4 shared publications - Hasan Omur Ozer
İSTANBUL ÜNİVERSİTESİ-CERRAHPAŞA, TEKNİK BİLİMLER MESLEK YÜKSEKOKULU, ELEKTRİK VE ENERJİ BÖLÜMÜ, İKLİMLENDİRME VE SOĞUTMA TEKNOLOJİSİ PR
3 shared publications - Sule Kapkin
İSTANBUL ÜNİVERSİTESİ-CERRAHPAŞA, MÜHENDİSLİK FAKÜLTESİ, MAKİNE MÜHENDİSLİĞİ BÖLÜMÜ, ENERJİ ANABİLİM DALI
3 shared publications - Alaattin Sayın
Department of Electronics and Automation, Vocational School of Technical Sciences, Istanbul University-Cerrahpaşa, 34500 Istanbul, Türkiye
2 shared publications - Aysun Soysal
Bakirkoy Education and Research Hospital for Psychiatric and Neurological Diseases, Istanbul, Turkey
2 shared publications
Latest Publications
- Open Access
- 3 November 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (44) , 446005
Physics-informed radial basis function neural networks for two-dimensional magnetostatic field modeling
Magnetic field modeling is essential for a wide range of applications, from electromagnetic device design to the analysis of geomagnetic and material-based systems. This study proposes two distinct neural network frameworks based on physics-informed radial basis function neural networks (PI-RBFNNs) to solve Maxwell’s equations on four different domains. The proposed unified and domain-specific network architectures use region-aware radial basis function kernels and are initialized by collocation governing equations in boundary and jump conditions. The models capture magnetic field behavior in both homogeneous and heterogeneous regions, with the level of agreement depending on the problem complexity and network architecture. All models are implemented using the TensorFlow framework, which enables efficient automatic differentiation and scalable optimization. Unlike conventional mesh-based numerical methods, the proposed PI-RBFNN framework provides a mesh-free formulation for magnetostatic field modeling. To evaluate the effectiveness of the models, results obtained from both configurations are compared with benchmark data from the literature and solutions generated by the finite difference method (FDM). The results show good agreement for simpler configurations, while discrepancies increase for more heterogeneous problems. For intermediate cases, the domain-specific architecture reduces the relative L 2 error with respect to FDM compared with the unified architecture. These findings demonstrate the potential of PI-RBFNN architectures for mesh-free modeling of magnetostatic field problems involving heterogeneous material regions and interface conditions, while further validation against independently converged reference solutions is required for broader assessment of their accuracy.
- 3 November 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (44) , 446005
Open AccessPhysics-informed radial basis function neural networks for two-dimensional magnetostatic field modeling
Magnetic field modeling is essential for a wide range of applications, from electromagnetic device design to the analysis of geomagnetic and material-based systems. This study proposes two distinct neural network frameworks based on physics-informed radial basis function neural networks (PI-RBFNNs) to solve Maxwell’s equations on four different domains. The proposed unified and domain-specific network architectures use region-aware radial basis function kernels and are initialized by collocation governing equations in boundary and jump conditions. The models capture magnetic field behavior in both homogeneous and heterogeneous regions, with the level of agreement depending on the problem complexity and network architecture. All models are implemented using the TensorFlow framework, which enables efficient automatic differentiation and scalable optimization. Unlike conventional mesh-based numerical methods, the proposed PI-RBFNN framework provides a mesh-free formulation for magnetostatic field modeling. To evaluate the effectiveness of the models, results obtained from both configurations are compared with benchmark data from the literature and solutions generated by the finite difference method (FDM). The results show good agreement for simpler configurations, while discrepancies increase for more heterogeneous problems. For intermediate cases, the domain-specific architecture reduces the relative L 2 error with respect to FDM compared with the unified architecture. These findings demonstrate the potential of PI-RBFNN architectures for mesh-free modeling of magnetostatic field problems involving heterogeneous material regions and interface conditions, while further validation against independently converged reference solutions is required for broader assessment of their accuracy.
- Open Access
- 23 September 2024
- Published by Gazi University Journal of Science in Gazi University Journal of Science
- Vol. 37 (4) , 1
Vibration response analysis of an aircraft structure in terms of crashworthiness by using differential transformation method
Due to importance of certification procedure and safety of occupants, crashworthiness is one of the most principal elements to be considered in the design and production of civil and military aircrafts. In the component level, the crashworthiness of an aircraft structure is significantly affected by many factors including the cross-section of the aircraft structure, boundary conditions of the aircraft structure, and applied crush loading to the aircraft structure. The aim of this study is to contribute to the literature on improving the design of aircraft structures in order to increase the energy absorption properties of the aircraft structures and therefore support the crashworthiness capability of the structures by performing vibration analysis. In this context, after deriving the governing equations of an aircraft structure exposed to an axial crush loading, three different applications are conducted to investigate the effects of the axial crush loading on the dynamic characteristics of the aircraft structure. The findings of the study concluded that vibration characteristics of an aircraft structure subjected to an axial crush loading are affected by the boundary conditions of the structure, material of the structure, cross-section of the structure, magnitude of the axial load applied to the structure, and direction of the axial load applied to the structure. In addition, the findings showed that the response of the structure under ultimate axial crush loading varies depending on the geometriy of the structure, material of the structure and the direction of the ultimate axial crush loading applied to the structure.
- 23 September 2024
- Published by Gazi University Journal of Science in Gazi University Journal of Science
- Vol. 37 (4) , 1
Open AccessVibration response analysis of an aircraft structure in terms of crashworthiness by using differential transformation method
Due to importance of certification procedure and safety of occupants, crashworthiness is one of the most principal elements to be considered in the design and production of civil and military aircrafts. In the component level, the crashworthiness of an aircraft structure is significantly affected by many factors including the cross-section of the aircraft structure, boundary conditions of the aircraft structure, and applied crush loading to the aircraft structure. The aim of this study is to contribute to the literature on improving the design of aircraft structures in order to increase the energy absorption properties of the aircraft structures and therefore support the crashworthiness capability of the structures by performing vibration analysis. In this context, after deriving the governing equations of an aircraft structure exposed to an axial crush loading, three different applications are conducted to investigate the effects of the axial crush loading on the dynamic characteristics of the aircraft structure. The findings of the study concluded that vibration characteristics of an aircraft structure subjected to an axial crush loading are affected by the boundary conditions of the structure, material of the structure, cross-section of the structure, magnitude of the axial load applied to the structure, and direction of the axial load applied to the structure. In addition, the findings showed that the response of the structure under ultimate axial crush loading varies depending on the geometriy of the structure, material of the structure and the direction of the ultimate axial crush loading applied to the structure.
- Open Access
- 15 September 2024
- Published by Karadeniz Fen Bilimleri Dergisi in Karadeniz Fen Bilimleri Dergisi
- Vol. 14 (3) , 1301-1321
Radyal Baz Fonksiyonu (RBF) kullanan Ağsız (Meshless) Çözüm Yöntemlerinde Şekil Parametresi ve Merkez Nokta Sayısının Çözüme Etkisi
Yere sahiptir. Fiziksel olaylar, belirli sınır şartları sağlayan diferansiyel denklem sistemleri ile matematiksel olarak modellenebilir. Genellikle denklem sisteminin analitik çözümünü bulmak mümkün olmaz. Bu nedenle çeşitli sayısal yöntemler geliştirilmiştir. Günümüzde en çok kullanılan sayısal çözüm yöntemlerinden ikisi Sonlu Elemanlar Yöntemi (SEY) ve Sonlu Farklar Yöntemi (SFY)’dir. Bu yöntemlerde çözüm alanı ağ adı verilen küçük parçalara (bölgelere) ayrılarak hesaplamalar yapılır. Ağ örme işlemi oldukça karmaşık ve uzun zaman alan bir işlemdir. Kırılma mekaniği ve hareketli sistemlerin modellenmesinde her hesaplama sonrası ağın yenilenmesi gereklidir. Araştırmacılar, özellikle 20. yüzyılın sonlarında bu zorlukların üstesinden gelmek için ağsız çözüm yöntemleri geliştirdiler. Çözüm alanına düzenli veya düzensiz örnekleme noktaları yerleştiren ağsız çözüm teknikleri için uygun bir temel fonksiyon ailesi de gereklidir. Önerilen baz fonksiyon ailesi, diferansiyel denklem sistemini ve sınır şartlarını sağlayacak şekil katsayıları ile temsil edilir. Bu çalışmada radyal baz fonksiyon (RBF) kullanan ağsız çözüm yöntemi bir boyutlu ve iki boyutlu ısı geçiş problemlerine uygulanmıştır. İncelenen problemlerde merkez noktaların ve şekil katsayısının benzetim sonuçlarına etkisi incelenmiştir. Bulgular, kontrol (kollokasyon) noktalarının sayısının doğrudan çözümün kararlılığıyla ilişkili olduğunu ve kontrol nokta sayısının merkez nokta sayısından fazla olduğunda kararlılığa katkıda bulunduğunu göstermektedir. Şekil yapısının uygun çözümü için merkez nokta değişikliklerinin büyüklüğünde bir artışın gerekli olduğu gözlemlenmiştir. Bu çalışmanın sonuçları, şekil katsayısı arttıkça doğru bir çözüme ulaşmak için merkez nokta sayısının ve yineleme sayısının da arttırılması gerektiğini göstermektedir.
- 15 September 2024
- Published by Karadeniz Fen Bilimleri Dergisi in Karadeniz Fen Bilimleri Dergisi
- Vol. 14 (3) , 1301-1321
Open AccessRadyal Baz Fonksiyonu (RBF) kullanan Ağsız (Meshless) Çözüm Yöntemlerinde Şekil Parametresi ve Merkez Nokta Sayısının Çözüme Etkisi
Yere sahiptir. Fiziksel olaylar, belirli sınır şartları sağlayan diferansiyel denklem sistemleri ile matematiksel olarak modellenebilir. Genellikle denklem sisteminin analitik çözümünü bulmak mümkün olmaz. Bu nedenle çeşitli sayısal yöntemler geliştirilmiştir. Günümüzde en çok kullanılan sayısal çözüm yöntemlerinden ikisi Sonlu Elemanlar Yöntemi (SEY) ve Sonlu Farklar Yöntemi (SFY)’dir. Bu yöntemlerde çözüm alanı ağ adı verilen küçük parçalara (bölgelere) ayrılarak hesaplamalar yapılır. Ağ örme işlemi oldukça karmaşık ve uzun zaman alan bir işlemdir. Kırılma mekaniği ve hareketli sistemlerin modellenmesinde her hesaplama sonrası ağın yenilenmesi gereklidir. Araştırmacılar, özellikle 20. yüzyılın sonlarında bu zorlukların üstesinden gelmek için ağsız çözüm yöntemleri geliştirdiler. Çözüm alanına düzenli veya düzensiz örnekleme noktaları yerleştiren ağsız çözüm teknikleri için uygun bir temel fonksiyon ailesi de gereklidir. Önerilen baz fonksiyon ailesi, diferansiyel denklem sistemini ve sınır şartlarını sağlayacak şekil katsayıları ile temsil edilir. Bu çalışmada radyal baz fonksiyon (RBF) kullanan ağsız çözüm yöntemi bir boyutlu ve iki boyutlu ısı geçiş problemlerine uygulanmıştır. İncelenen problemlerde merkez noktaların ve şekil katsayısının benzetim sonuçlarına etkisi incelenmiştir. Bulgular, kontrol (kollokasyon) noktalarının sayısının doğrudan çözümün kararlılığıyla ilişkili olduğunu ve kontrol nokta sayısının merkez nokta sayısından fazla olduğunda kararlılığa katkıda bulunduğunu göstermektedir. Şekil yapısının uygun çözümü için merkez nokta değişikliklerinin büyüklüğünde bir artışın gerekli olduğu gözlemlenmiştir. Bu çalışmanın sonuçları, şekil katsayısı arttıkça doğru bir çözüme ulaşmak için merkez nokta sayısının ve yineleme sayısının da arttırılması gerektiğini göstermektedir.
- Open Access
- 5 June 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (11) , 4892
Flutter of a Plate at High Supersonic Speeds
The vibrations of plate structures placed in a supersonic flow was considered. The undisturbed fluid flow was parallel to the plate. This type of problem is especially important in the aerospace industry, where it is named panel flutter. It has been noticed for a long time that panel flutter may be problematic at high speeds. In this article, two specific problems were treated: in the first one, the plate was in the form of an infinite strip and the flow was in the direction of its finite length. Rigid walls indefinitely extended from the sides of the plate. In the second problem, the plate was a finite rectangle and the flow was parallel to one of its sides. The rest of the plane of the rectangle was again rigid. The first problem was a limiting case of the second problem. The flow was modeled by piston theory, which assumes that the fluid pressure on the plate is proportional to its local slope. This approximation is widely used at high speeds (supersonic speeds in the range of M > 1), and reduces the interaction between the fluid flow and the vibrations of the plate to an additional term in the vibration equation. The resulting problem can be solved by assumed mode methods. In this study, the solution was also found by using the collocation method. The contribution of this study is the correlation between the flutter velocity and the other parameters of the plate. The main result is the flutter velocity of the free fluid flow under which the plate vibrations become unstable. Finally, simple expressions are proposed between the various non-dimensional parameters that allows for the quick estimation of the flutter velocity. These simple expressions were deduced by least squares fits to the computed flutter velocities.
- 5 June 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (11) , 4892
Open AccessFlutter of a Plate at High Supersonic Speeds
The vibrations of plate structures placed in a supersonic flow was considered. The undisturbed fluid flow was parallel to the plate. This type of problem is especially important in the aerospace industry, where it is named panel flutter. It has been noticed for a long time that panel flutter may be problematic at high speeds. In this article, two specific problems were treated: in the first one, the plate was in the form of an infinite strip and the flow was in the direction of its finite length. Rigid walls indefinitely extended from the sides of the plate. In the second problem, the plate was a finite rectangle and the flow was parallel to one of its sides. The rest of the plane of the rectangle was again rigid. The first problem was a limiting case of the second problem. The flow was modeled by piston theory, which assumes that the fluid pressure on the plate is proportional to its local slope. This approximation is widely used at high speeds (supersonic speeds in the range of M > 1), and reduces the interaction between the fluid flow and the vibrations of the plate to an additional term in the vibration equation. The resulting problem can be solved by assumed mode methods. In this study, the solution was also found by using the collocation method. The contribution of this study is the correlation between the flutter velocity and the other parameters of the plate. The main result is the flutter velocity of the free fluid flow under which the plate vibrations become unstable. Finally, simple expressions are proposed between the various non-dimensional parameters that allows for the quick estimation of the flutter velocity. These simple expressions were deduced by least squares fits to the computed flutter velocities.
- Open Access
- 29 February 2024
- Published by Sakarya University Journal of Science in Sakarya University Journal of Science
- Vol. 28 (1) , 167-173
Distributed Control of a Vibrating String in Response to Pointwise Force Application
The problem of controlling the vibrations of a string by a discrete applied force is considered. The vibrations of the string are modeled by the linear wave equation and the control is provided by an added force term. The wave equation is solved for controlled and uncontrolled cases with and without control force term. The applied force is chosen to be proportional to string displacement at some specified point. In the controlled case; the wave equation involves a control parameter (gain) and related terms involving the value of the displcement at a single point and a delta function. This makes the equation quite different from the usual wave equation. The problem is solved analytically using a modified (compared to usual wave equation) solution procedure and an equation relating the string eigenfrequencies to the proportionality constant (gain) is derived. This allows the observation of the change in eigenfrequencies with the gain. Finally, examples of uncontrolled and controlled responses are presented, graphically. The results show that the resonances can be avoided by the applied control procedure.
- 29 February 2024
- Published by Sakarya University Journal of Science in Sakarya University Journal of Science
- Vol. 28 (1) , 167-173
Open AccessDistributed Control of a Vibrating String in Response to Pointwise Force Application
The problem of controlling the vibrations of a string by a discrete applied force is considered. The vibrations of the string are modeled by the linear wave equation and the control is provided by an added force term. The wave equation is solved for controlled and uncontrolled cases with and without control force term. The applied force is chosen to be proportional to string displacement at some specified point. In the controlled case; the wave equation involves a control parameter (gain) and related terms involving the value of the displcement at a single point and a delta function. This makes the equation quite different from the usual wave equation. The problem is solved analytically using a modified (compared to usual wave equation) solution procedure and an equation relating the string eigenfrequencies to the proportionality constant (gain) is derived. This allows the observation of the change in eigenfrequencies with the gain. Finally, examples of uncontrolled and controlled responses are presented, graphically. The results show that the resonances can be avoided by the applied control procedure.
- 29 February 2024
- Published by Politeknik Dergisi in Journal of Polytechnic
- Vol. 27 (1) , 255-261
Analytical Solution of a Multi-Winding Coil Problem With an Air Core in Spherical Coordinates
In this study, electromagnetic fields and mutual inductance of two interacting coils were computed analytically, and the results were compared with numerical solutions and measurements. For the analytical solution, the fields were expressed in spherical coordinates in each coil’s frame. The total field due to two coils was calculated using superposition, resulting in infinite series involving associated Legendre functions. The numerical computations were carried out by finite element analysis capabilities of ANSYS Maxwell. At the end, the self-inductances and the mutual inductance coefficients between the coils (which depend on the angle between the coils) were computed. The results (analytical, finite element method, and the measurements) were compared, obtaining good agreement for various relative positions of the coils.
- 29 February 2024
- Published by Politeknik Dergisi in Journal of Polytechnic
- Vol. 27 (1) , 255-261
Analytical Solution of a Multi-Winding Coil Problem With an Air Core in Spherical Coordinates
In this study, electromagnetic fields and mutual inductance of two interacting coils were computed analytically, and the results were compared with numerical solutions and measurements. For the analytical solution, the fields were expressed in spherical coordinates in each coil’s frame. The total field due to two coils was calculated using superposition, resulting in infinite series involving associated Legendre functions. The numerical computations were carried out by finite element analysis capabilities of ANSYS Maxwell. At the end, the self-inductances and the mutual inductance coefficients between the coils (which depend on the angle between the coils) were computed. The results (analytical, finite element method, and the measurements) were compared, obtaining good agreement for various relative positions of the coils.
- Open Access
- 27 January 2024
- Published by Hindawi Limited in Mathematical Problems in Engineering
- Vol. 2024, 1-17
An Analytical-Based Lightning-Induced Damage Model for an Aircraft Wing Exposed to Pressure Loading of Lightning
Lightning is one of the natural hazards that any aircraft may encounter while navigating. If adequate precautions are not taken against lightning, structural damage, operational disruptions, and loss of life and property can occur. Thus, studying the mechanism of damage caused by lightning strikes in an aircraft’s structural material is necessary to optimize the structure, minimize the damage, and reduce the cost caused by lightning. In the present article, the lightning-induced damage behavior of an aircraft structural material was investigated from an analytical perspective. For this purpose, two analytical-based models were developed: an improved electromagnetic pressure impact model (IEPIM) and the damage model in an aircraft wing. For the IEPIM, the findings of the article showed that the proposed pressure model is in good agreement with the experimental studies, borrowed from the open literature, for 100 and 200 kA lightning current. For the damage model, the findings of the article indicated that (i) even though lightning strikes to the regions with the same characteristics on an aircraft wing in terms of the lightning strike zone, the amount of deflection in the wing increases as the impact point approaches the wing tip and decreases as it approaches the wing root, (ii) without changing the lightning strike point (), when the damping coefficient () is increased in the range of , the amount of deflection decreases as the amount of damping coefficient increases, and (iii) when lightning with a current of 100 kA hits to the wing root of an aircraft, the pressure impact of the lightning causes more torsion deflection than bending deflection at the wing root; however, when it hits to the mid-wing or wing tip of an aircraft, the pressure impact of the lightning causes more bending deflection than torsion deflection at the mid-wing or wing tip.
- 27 January 2024
- Published by Hindawi Limited in Mathematical Problems in Engineering
- Vol. 2024, 1-17
Open AccessAn Analytical-Based Lightning-Induced Damage Model for an Aircraft Wing Exposed to Pressure Loading of Lightning
Lightning is one of the natural hazards that any aircraft may encounter while navigating. If adequate precautions are not taken against lightning, structural damage, operational disruptions, and loss of life and property can occur. Thus, studying the mechanism of damage caused by lightning strikes in an aircraft’s structural material is necessary to optimize the structure, minimize the damage, and reduce the cost caused by lightning. In the present article, the lightning-induced damage behavior of an aircraft structural material was investigated from an analytical perspective. For this purpose, two analytical-based models were developed: an improved electromagnetic pressure impact model (IEPIM) and the damage model in an aircraft wing. For the IEPIM, the findings of the article showed that the proposed pressure model is in good agreement with the experimental studies, borrowed from the open literature, for 100 and 200 kA lightning current. For the damage model, the findings of the article indicated that (i) even though lightning strikes to the regions with the same characteristics on an aircraft wing in terms of the lightning strike zone, the amount of deflection in the wing increases as the impact point approaches the wing tip and decreases as it approaches the wing root, (ii) without changing the lightning strike point (), when the damping coefficient () is increased in the range of , the amount of deflection decreases as the amount of damping coefficient increases, and (iii) when lightning with a current of 100 kA hits to the wing root of an aircraft, the pressure impact of the lightning causes more torsion deflection than bending deflection at the wing root; however, when it hits to the mid-wing or wing tip of an aircraft, the pressure impact of the lightning causes more bending deflection than torsion deflection at the mid-wing or wing tip.
- Open Access
- 22 November 2023
- Published by MDPI AG in Preprints.org
Flutter of a Plate at High Supersonic Speeds
Vibrations of plate structures placed in a supersonic flow is considered. The undisturbed fluid flow is parallel to the plate. Two specific problems are treated: in the first one the plate is in the form of an infinite strip and the flow is in the direction of its finite length. Rigid walls extend from the sides of the plate indefinitely. In the second problem, the plate is a finite rectangle and the flow is parallel to one of its sides. The first problem is a limiting case of the second problem. The flow is modeled by piston theory which assumes that the fluid pressure on the plate is proportional to local slope. This approximation is widely used at high speeds, and reduces the interaction between the fluid flow and the vibrations of the plate to an additional term in the vibration equation. The resulting problem can be solved by assumed mode methods. In this study, the solution is also carried out by using the collocation method. The main result is the flutter velocity of the free fluid flow under which the plate vibrations become unstable. Finally, simple expressions are proposed between the various non-dimensional parameters that allows quick estimation of flutter velocity.
- 22 November 2023
- Published by MDPI AG in Preprints.org
Open AccessFlutter of a Plate at High Supersonic Speeds
Vibrations of plate structures placed in a supersonic flow is considered. The undisturbed fluid flow is parallel to the plate. Two specific problems are treated: in the first one the plate is in the form of an infinite strip and the flow is in the direction of its finite length. Rigid walls extend from the sides of the plate indefinitely. In the second problem, the plate is a finite rectangle and the flow is parallel to one of its sides. The first problem is a limiting case of the second problem. The flow is modeled by piston theory which assumes that the fluid pressure on the plate is proportional to local slope. This approximation is widely used at high speeds, and reduces the interaction between the fluid flow and the vibrations of the plate to an additional term in the vibration equation. The resulting problem can be solved by assumed mode methods. In this study, the solution is also carried out by using the collocation method. The main result is the flutter velocity of the free fluid flow under which the plate vibrations become unstable. Finally, simple expressions are proposed between the various non-dimensional parameters that allows quick estimation of flutter velocity.
- Open Access
- 21 August 2023
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 39 (1) , 65-76
Analytical solution of multi-winding coil problem in magnetic core in spherical coordinates and comparison with FEA results
Teknolojinin gelişimi ile birlikte hareket ve kontrol mekanizmaları çok eksende hareket edebilen, daha hızlı ve hassas hareket sağlanabilecek cihazlara ihtiyaç duymaktadır. Bu nedenle; küresel koordinat sisteminde elektromanyetik sistemlerin parametrelerinin analitik veya yarı analitik yöntemlerle hesaplanması son yıllarda önemli araştırma konularından biri haline gelmiştir. Bu çalışmada manyetik bir nüve içerisine sarılmış çok sarımlı bobin yapısı incelenmiştir. Öncelikle tek sarımlı bobin yaklaşımından yararlanarak çok sarımlı bobinler için B, E ve A ifadeleri analitik olarak hesaplanmıştır. Aynı geometriler, sonlu elemanlar analizi (FEA) kullanılarak ANSYS Maxwell programında dairesel simetri kabulü ile hesaplanmıştır. Son olarak, biri r1 yarıçapına sahip manyetik nüve içerisinde olan, eş merkezli iki bobin geometrisi belirlenmiştir. Bu geometriler için öz indüktans (Lii) ve karşılıklı indüktans (Mij) katsayıları küresel koordinatlarda γ açısına bağlı olarak incelenmiştir. ANSYS Maxwell programı üzerinde bobin geometrilerinin 3 boyutlu modeli oluşturularak benzetim çalışmaları yapılmıştır. FEA ve analitik sonuçlar kıyaslanarak geçerliliği gösterilmiştir.
- 21 August 2023
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 39 (1) , 65-76
Open AccessAnalytical solution of multi-winding coil problem in magnetic core in spherical coordinates and comparison with FEA results
Teknolojinin gelişimi ile birlikte hareket ve kontrol mekanizmaları çok eksende hareket edebilen, daha hızlı ve hassas hareket sağlanabilecek cihazlara ihtiyaç duymaktadır. Bu nedenle; küresel koordinat sisteminde elektromanyetik sistemlerin parametrelerinin analitik veya yarı analitik yöntemlerle hesaplanması son yıllarda önemli araştırma konularından biri haline gelmiştir. Bu çalışmada manyetik bir nüve içerisine sarılmış çok sarımlı bobin yapısı incelenmiştir. Öncelikle tek sarımlı bobin yaklaşımından yararlanarak çok sarımlı bobinler için B, E ve A ifadeleri analitik olarak hesaplanmıştır. Aynı geometriler, sonlu elemanlar analizi (FEA) kullanılarak ANSYS Maxwell programında dairesel simetri kabulü ile hesaplanmıştır. Son olarak, biri r1 yarıçapına sahip manyetik nüve içerisinde olan, eş merkezli iki bobin geometrisi belirlenmiştir. Bu geometriler için öz indüktans (Lii) ve karşılıklı indüktans (Mij) katsayıları küresel koordinatlarda γ açısına bağlı olarak incelenmiştir. ANSYS Maxwell programı üzerinde bobin geometrilerinin 3 boyutlu modeli oluşturularak benzetim çalışmaları yapılmıştır. FEA ve analitik sonuçlar kıyaslanarak geçerliliği gösterilmiştir.