Grzegorz Gomółka
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Grzegorz Gomółka has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Michal Nikodem
Department of Optics and Photonics, Wroclaw University of Science and Technology, Wroclaw, Poland
6 shared publications Dariusz Pysz
Łukasiewicz Research Network-Institute of Microelectronics and Photonics
5 shared publications- Aleksandr Khegai
Prokhorov General Physics Institute of the Russian Academy of Sciences, Dianov Fiber Optics Research Center, Moscow, Russia
3 shared publications - Lukasz Antoni Sterczewski
Wroclaw University of Science and Technology
3 shared publications - Ryszard Buczynski
Institute of Microelectronics and Photonics, Lukasiewicz Research Network, Warsaw, Poland
3 shared publications Ryszard Buczyński
3 shared publications
Latest Publications
- Open Access
- 21 September 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (12)
GHz-bandwidth InAs/InAsSbP barrier infrared detectors for the 3.0–3.7 μ m spectral region operating at room temperature
The demand for fast mid-wave infrared photodetectors is fueled by high-rate free-space optical communication and optical frequency comb spectroscopy. To date, only a few multi-GHz photodetectors have shown sensitive room-temperature operation in the 3.0–3.7 μm band, yet their commercial availability remains scarce. In this work, we present the remarkable response speed of an InAs/InAsSbP p-Bp-i-n barrier detector based on a p-InAsSbP/n-InAs heterostructure—a technological platform typically not associated with high-frequency operation. A weakly reverse-biased photodiode with a diameter of 121 μm achieves a −3 dB electrical bandwidth of 2.4 GHz and −20 dB bandwidth of 8.0 GHz. This is the best result in this class of mid-infrared photodetectors confirmed optically. High signal-to-noise photodetection is also demonstrated at frequencies exceeding 19 GHz. The relatively simple device structure (devoid of cascaded structure or type-II superlattice) was realized on the mature InAs material platform, which opens new perspectives for accessible, sensitive, multi-GHz photodetectors for the 3.0–3.7 μm spectral region.
- 21 September 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (12)
Open AccessGHz-bandwidth InAs/InAsSbP barrier infrared detectors for the 3.0–3.7 μ m spectral region operating at room temperature
The demand for fast mid-wave infrared photodetectors is fueled by high-rate free-space optical communication and optical frequency comb spectroscopy. To date, only a few multi-GHz photodetectors have shown sensitive room-temperature operation in the 3.0–3.7 μm band, yet their commercial availability remains scarce. In this work, we present the remarkable response speed of an InAs/InAsSbP p-Bp-i-n barrier detector based on a p-InAsSbP/n-InAs heterostructure—a technological platform typically not associated with high-frequency operation. A weakly reverse-biased photodiode with a diameter of 121 μm achieves a −3 dB electrical bandwidth of 2.4 GHz and −20 dB bandwidth of 8.0 GHz. This is the best result in this class of mid-infrared photodetectors confirmed optically. High signal-to-noise photodetection is also demonstrated at frequencies exceeding 19 GHz. The relatively simple device structure (devoid of cascaded structure or type-II superlattice) was realized on the mature InAs material platform, which opens new perspectives for accessible, sensitive, multi-GHz photodetectors for the 3.0–3.7 μm spectral region.
- 7 July 2026
- Published by Optica Publishing Group in Optica
- Vol. 13 (9) , 1796
Microwave noise downconversion in interband cascade laser frequency combs
Chip-scale semiconductor laser frequency combs offer remarkable prospects for compact and power-efficient optical sensors. For the laser to be suitable for typical comb applications, its degree of coherence must first be assessed from a microwave self-mixing signal. Unfortunately, such measurements require scarcely available high-speed photodetectors with multi-GHz bandwidths and radio-frequency electronics. However, in this work, we demonstrate a simplified approach to comb coherence assessment for interband cascade lasers based on a relationship between easily-accessible MHz-frequency (baseband) noise and the multi-GHz-frequency intermode beat note. The downconversion of microwave noise to near-DC frequencies is found to originate intrinsically from the laser, which simultaneously acts as a frequency mixer due to electrical nonlinearities and a phase-to-amplitude noise converter due to the linewidth enhancement factor. Correlation between the electrical signals is explored in both frequency and time domains. Since this phenomenon is present in interband cascade lasers, and potentially in other classes of semiconductor lasers, it creates an opportunity for frequency comb characterization, which may be particularly valuable in wavelength regions where fast photodetectors have limited availability.
- 7 July 2026
- Published by Optica Publishing Group in Optica
- Vol. 13 (9) , 1796
Microwave noise downconversion in interband cascade laser frequency combs
Chip-scale semiconductor laser frequency combs offer remarkable prospects for compact and power-efficient optical sensors. For the laser to be suitable for typical comb applications, its degree of coherence must first be assessed from a microwave self-mixing signal. Unfortunately, such measurements require scarcely available high-speed photodetectors with multi-GHz bandwidths and radio-frequency electronics. However, in this work, we demonstrate a simplified approach to comb coherence assessment for interband cascade lasers based on a relationship between easily-accessible MHz-frequency (baseband) noise and the multi-GHz-frequency intermode beat note. The downconversion of microwave noise to near-DC frequencies is found to originate intrinsically from the laser, which simultaneously acts as a frequency mixer due to electrical nonlinearities and a phase-to-amplitude noise converter due to the linewidth enhancement factor. Correlation between the electrical signals is explored in both frequency and time domains. Since this phenomenon is present in interband cascade lasers, and potentially in other classes of semiconductor lasers, it creates an opportunity for frequency comb characterization, which may be particularly valuable in wavelength regions where fast photodetectors have limited availability.
- 24 June 2026
- Published by Optica Publishing Group in Optica
- Vol. 13 (8) , 1533
Incoherent Fourier Transform Spectroscopy with Room-Temperature Coverage from NIR To THz
Despite the broadband nature of thermal light sources, optical spectroscopy over multiple spectral bands simultaneously remains challenging. Here, we demonstrate a practical Fourier transform infrared spectrometer (FTIR) that achieves room-temperature spectral coverage from 1 to 50 µm (300–6 THz) in seconds using a single set of optics, with the long wave cutoff extendable to 90 µm (3.3 THz) and the short wave to the ultraviolet (0.39 µm). The interferometer employs a diamond plate beam splitter and a windowless lithium tantalate (LTO) detector to probe the spectrum of combined incoherent sources operating at different temperatures. Applications of the instrument in modern chemometry, material science, and medicine are envisioned.
- 24 June 2026
- Published by Optica Publishing Group in Optica
- Vol. 13 (8) , 1533
Incoherent Fourier Transform Spectroscopy with Room-Temperature Coverage from NIR To THz
Despite the broadband nature of thermal light sources, optical spectroscopy over multiple spectral bands simultaneously remains challenging. Here, we demonstrate a practical Fourier transform infrared spectrometer (FTIR) that achieves room-temperature spectral coverage from 1 to 50 µm (300–6 THz) in seconds using a single set of optics, with the long wave cutoff extendable to 90 µm (3.3 THz) and the short wave to the ultraviolet (0.39 µm). The interferometer employs a diamond plate beam splitter and a windowless lithium tantalate (LTO) detector to probe the spectrum of combined incoherent sources operating at different temperatures. Applications of the instrument in modern chemometry, material science, and medicine are envisioned.
- 30 June 2025
- Published by Optica Publishing Group in Applied Optics
- Vol. 64 (20) , 5624-5631
Demonstration of a compact reflective gas sensing probe based on a negative-curvature hollow-core fiber
In this study, we demonstrate a compact reflective gas sensing probe based on a negative-curvature hollow-core fiber. The probe’s design simplifies gas detection by eliminating the need for additional tubing, thereby improving the response time of gas sensing with hollow-core fibers. Using tunable diode laser absorption spectroscopy and wavelength modulation spectroscopy, we achieved detection limits of ∼1.5ppm for near-infrared methane sensing and below 100 ppb for mid-infrared detection. The probe’s straightforward construction and compact form factor make it suitable for in situ measurements in hard-to-reach locations, offering a practical solution for gas leak detection and environmental monitoring.
- 30 June 2025
- Published by Optica Publishing Group in Applied Optics
- Vol. 64 (20) , 5624-5631
Demonstration of a compact reflective gas sensing probe based on a negative-curvature hollow-core fiber
In this study, we demonstrate a compact reflective gas sensing probe based on a negative-curvature hollow-core fiber. The probe’s design simplifies gas detection by eliminating the need for additional tubing, thereby improving the response time of gas sensing with hollow-core fibers. Using tunable diode laser absorption spectroscopy and wavelength modulation spectroscopy, we achieved detection limits of ∼1.5ppm for near-infrared methane sensing and below 100 ppb for mid-infrared detection. The probe’s straightforward construction and compact form factor make it suitable for in situ measurements in hard-to-reach locations, offering a practical solution for gas leak detection and environmental monitoring.
- Open Access
- 15 January 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (2) , 2126-2137
Broadband photothermal spectroscopy with a mid-infrared quantum cascade laser frequency comb
We demonstrate a broadband photothermal spectroscopy in the mid-infrared region using a quantum cascade laser frequency comb operating between ∼7.7 and ∼8.2 µm covering a frequency range of ∼70 cm-1. The photothermal spectroscopy technique employs a Mach-Zehnder interferometer operating in a pump-probe configuration, where the mid-infrared pump beam is modulated by a Fourier transform spectrometer. A 76-m Herriott-type multipass cell is used for signal enhancement. As a proof-of-concept, we have measured the photothermal spectra of nitrous oxide that show good agreement with the HITRAN database. A minimum detection limit of 83 ppb of nitrous oxide in nitrogen is estimated from a broadband photothermal spectrum with 9.9 GHz spectral point spacing and acquired over 78 minutes. This detection scheme also provides over three orders of magnitude of photothermal signal linearity with gas concentration. This spectroscopic method combines the functionality of high sensitivity and background-free detection of photothermal spectroscopy as well as broadband mid-infrared operation of quantum cascade laser frequency comb, which could find applications in trace gas sensing systems that benefit from these features.
- 15 January 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (2) , 2126-2137
Open AccessBroadband photothermal spectroscopy with a mid-infrared quantum cascade laser frequency comb
We demonstrate a broadband photothermal spectroscopy in the mid-infrared region using a quantum cascade laser frequency comb operating between ∼7.7 and ∼8.2 µm covering a frequency range of ∼70 cm-1. The photothermal spectroscopy technique employs a Mach-Zehnder interferometer operating in a pump-probe configuration, where the mid-infrared pump beam is modulated by a Fourier transform spectrometer. A 76-m Herriott-type multipass cell is used for signal enhancement. As a proof-of-concept, we have measured the photothermal spectra of nitrous oxide that show good agreement with the HITRAN database. A minimum detection limit of 83 ppb of nitrous oxide in nitrogen is estimated from a broadband photothermal spectrum with 9.9 GHz spectral point spacing and acquired over 78 minutes. This detection scheme also provides over three orders of magnitude of photothermal signal linearity with gas concentration. This spectroscopic method combines the functionality of high sensitivity and background-free detection of photothermal spectroscopy as well as broadband mid-infrared operation of quantum cascade laser frequency comb, which could find applications in trace gas sensing systems that benefit from these features.
- Open Access
- 23 December 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (27) , 48847-48857
Gas leak detection by measuring dilution of ambient air with differential optical dispersion spectroscopy of oxygen
Gas leak detection is one of the most vital issues in the mining and energy industries. Despite many highly specific and sensitive laser-based spectroscopic systems available on the market, the universal optical gas leak detector is still unattainable. In this paper we demonstrate the laser gas sensing setup capable of indirect detection of virtually any gas leaks using differential optical dispersion spectroscopy of oxygen near 761 nm. A semi-fiber interferometric setup with two multi-pass gas cells yields a signal proportional to the difference in O2 concentrations between two equal optical path length Herriott multipass cells, which is used to detect leaks of the non-absorbent nitrogen by sensing the dilution of atmospheric oxygen. This new kind of sensor could become a substantial contribution to developing gas-related industries, such as hydrogen fuel storage and transmission.
- 23 December 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (27) , 48847-48857
Open AccessGas leak detection by measuring dilution of ambient air with differential optical dispersion spectroscopy of oxygen
Gas leak detection is one of the most vital issues in the mining and energy industries. Despite many highly specific and sensitive laser-based spectroscopic systems available on the market, the universal optical gas leak detector is still unattainable. In this paper we demonstrate the laser gas sensing setup capable of indirect detection of virtually any gas leaks using differential optical dispersion spectroscopy of oxygen near 761 nm. A semi-fiber interferometric setup with two multi-pass gas cells yields a signal proportional to the difference in O2 concentrations between two equal optical path length Herriott multipass cells, which is used to detect leaks of the non-absorbent nitrogen by sensing the dilution of atmospheric oxygen. This new kind of sensor could become a substantial contribution to developing gas-related industries, such as hydrogen fuel storage and transmission.
- 11 March 2024
- Published by Elsevier in Optical Fiber Technology
- Vol. 84
Fast response multi-segment anti-resonant hollow-core fiber methane sensor at 1687 nm
- 11 March 2024
- Published by Elsevier in Optical Fiber Technology
- Vol. 84
Fast response multi-segment anti-resonant hollow-core fiber methane sensor at 1687 nm
- 19 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 30 (6: Advance) , 1-8
Suppression of Optical Fringes in Gas Spectroscopy Inside Anti-Resonant Hollow-Core Fibers by Fiber Bending
Multimodal interference is frequently pointed out as one of the main limiting factors in gas sensing setups which utilize hollow-core optical fibers as gas cells. In this paper we demonstrate suppression of optical fringes that originate from propagation of higher order modes in an anti-resonant hollow-core fiber by controlled fiber bending. Near-infrared broadband absorption spectroscopy is used to characterize the fringe patterns observed when higher order modes are excited and suppressed. A tunable laser diode emitting near 1687 nm is used to present positive impact of bending the hollow-core fiber on signals recorded with both direct absorption spectroscopy and wavelength modulation spectroscopy of methane. Bending radius of 30 mm was found optimal for the setup presented in this work, leading to sub-ppm-level detection limit at 1687 nm with 7.35-m-long fiber.
- 19 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 30 (6: Advance) , 1-8
Suppression of Optical Fringes in Gas Spectroscopy Inside Anti-Resonant Hollow-Core Fibers by Fiber Bending
Multimodal interference is frequently pointed out as one of the main limiting factors in gas sensing setups which utilize hollow-core optical fibers as gas cells. In this paper we demonstrate suppression of optical fringes that originate from propagation of higher order modes in an anti-resonant hollow-core fiber by controlled fiber bending. Near-infrared broadband absorption spectroscopy is used to characterize the fringe patterns observed when higher order modes are excited and suppressed. A tunable laser diode emitting near 1687 nm is used to present positive impact of bending the hollow-core fiber on signals recorded with both direct absorption spectroscopy and wavelength modulation spectroscopy of methane. Bending radius of 30 mm was found optimal for the setup presented in this work, leading to sub-ppm-level detection limit at 1687 nm with 7.35-m-long fiber.
- 8 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (18) , 6094-6101
Dual-Pass Hollow-Core Fiber Gas Spectroscopy Using a Reflective Configuration With Heterodyne-Based Signal Detection
Hollow-core optical fibers have been used for laser gas sensing for almost two decades. However, to date, the vast majority of sensing systems have used hollow-core fiber only as a replacement for bulky gas cells (single- or multi-pass). Here, we investigate a reflective, dual-pass configuration in which light enters and exits hollow-core fiber from the same side. The advantage of this approach is the fact that the hollow-core fiber can be used not only as a cell but also as an endoscope-like probe, which does not need any additional tubing for sample delivery. In this article, we identify unwanted reflections from various fiber-to-fiber connections in the setup as the main challenge limiting the performance of the sensor in reflective configuration. We propose and experimentally demonstrate that the problem of reflections can be addressed using heterodyne-based detection, which allows for identifying and extracting useful signals in the radio frequency domain. Absorption and dispersion spectroscopy of methane are performed as a proof-of-concept with a detection limit of methane concentration below 10 ppm. Discussion insights into further development are provided, including strategies for miniaturization and detection limit improvement.
- 8 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (18) , 6094-6101
Dual-Pass Hollow-Core Fiber Gas Spectroscopy Using a Reflective Configuration With Heterodyne-Based Signal Detection
Hollow-core optical fibers have been used for laser gas sensing for almost two decades. However, to date, the vast majority of sensing systems have used hollow-core fiber only as a replacement for bulky gas cells (single- or multi-pass). Here, we investigate a reflective, dual-pass configuration in which light enters and exits hollow-core fiber from the same side. The advantage of this approach is the fact that the hollow-core fiber can be used not only as a cell but also as an endoscope-like probe, which does not need any additional tubing for sample delivery. In this article, we identify unwanted reflections from various fiber-to-fiber connections in the setup as the main challenge limiting the performance of the sensor in reflective configuration. We propose and experimentally demonstrate that the problem of reflections can be addressed using heterodyne-based detection, which allows for identifying and extracting useful signals in the radio frequency domain. Absorption and dispersion spectroscopy of methane are performed as a proof-of-concept with a detection limit of methane concentration below 10 ppm. Discussion insights into further development are provided, including strategies for miniaturization and detection limit improvement.
- 1 January 2023
- Published by Optica Publishing Group
- p. JW4A.14
Advances in near-infrared methane sensing using antiresonant hollow-core fibers
Fast response all-fiber laser absorption spectroscopy gas sensor design based on multi-segment antiresonant hollow-core fiber is presented. Gas filling time reduction below 5 s is reported with a 5.4-m-long fiber.
- 1 January 2023
- Published by Optica Publishing Group
- p. JW4A.14
Advances in near-infrared methane sensing using antiresonant hollow-core fibers
Fast response all-fiber laser absorption spectroscopy gas sensor design based on multi-segment antiresonant hollow-core fiber is presented. Gas filling time reduction below 5 s is reported with a 5.4-m-long fiber.