Saliha Ünver
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Saliha Ünver has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Selçuk Gümüş
Karadeniz Teknik Üniversitesi
3 shared publications - Emre Küçükbekir
Department of Forest Engineering, Karadeniz Technical University, 61080 Trabzon, Türkiye
2 shared publications - Mahmut Muhammet Bayramoglu
Department of Forest Engineering, Karadeniz Technical University, 61080 Trabzon, Türkiye
2 shared publications - Oğuz Kurdoğlu
Karadeniz Teknik Üniversitesi
2 shared publications - Ebru Bilici
Giresun University, Dereli Vocational School
1 shared publication - Kamber Can Alkiş
İzmir Orman Bölge Müdürlüğü
1 shared publication
Latest Publications
- Open Access
- 29 July 2026
- Published by European Journal of Forest Engineering in European Journal of Forest Engineering
- No. Advanced O,p. 116-126
The Role of Sociodemographic Characteristics in Expert Perceptions of the Ecological Impacts of Forest Roads
This study examined whether experts’ perceptions of the ecological impacts of forest roads differed by age, gender, professional experience, and sector of employment. The research involved 120 participants from civil engineering, forestry engineering, landscape architecture, and urban and regional planning. Data were collected using a structured questionnaire consisting of three sections: sociodemographic characteristics, open-ended questions, and a set of 36 questionnaire statements specifically developed for this to assess expert perceptions of the ecological impacts of roads in natural ecosystems. The data were analysed using frequency analysis, the independent samples t-test, one-way analysis of variance (ANOVA), and post hoc multiple comparison tests. The findings indicated that participants generally had at least a moderate level of knowledge regarding the ecological impacts of forest roads. Significant differences in responses were observed by gender, age, professional experience, and sector of employment. In particular, differences in sociodemographic variables emerged for habitat integrity, fragmentation, stream improvement, road density, ecological design solutions, and wildlife corridors. The finding that most experts demonstrated at least a moderate knowledge suggests that sociodemographic differences in expert evaluations may provide useful input for improving ecological sensitivity, participatory decision-making, and mitigation-oriented planning in forest road management. Consequently, it was determined that expert assessments of the ecological impacts of forest roads are shaped by technical knowledge, as well ass by sociodemographic and professional characteristics.
- 29 July 2026
- Published by European Journal of Forest Engineering in European Journal of Forest Engineering
- No. Advanced O,p. 116-126
Open AccessThe Role of Sociodemographic Characteristics in Expert Perceptions of the Ecological Impacts of Forest Roads
This study examined whether experts’ perceptions of the ecological impacts of forest roads differed by age, gender, professional experience, and sector of employment. The research involved 120 participants from civil engineering, forestry engineering, landscape architecture, and urban and regional planning. Data were collected using a structured questionnaire consisting of three sections: sociodemographic characteristics, open-ended questions, and a set of 36 questionnaire statements specifically developed for this to assess expert perceptions of the ecological impacts of roads in natural ecosystems. The data were analysed using frequency analysis, the independent samples t-test, one-way analysis of variance (ANOVA), and post hoc multiple comparison tests. The findings indicated that participants generally had at least a moderate level of knowledge regarding the ecological impacts of forest roads. Significant differences in responses were observed by gender, age, professional experience, and sector of employment. In particular, differences in sociodemographic variables emerged for habitat integrity, fragmentation, stream improvement, road density, ecological design solutions, and wildlife corridors. The finding that most experts demonstrated at least a moderate knowledge suggests that sociodemographic differences in expert evaluations may provide useful input for improving ecological sensitivity, participatory decision-making, and mitigation-oriented planning in forest road management. Consequently, it was determined that expert assessments of the ecological impacts of forest roads are shaped by technical knowledge, as well ass by sociodemographic and professional characteristics.
- Open Access
Expert Perceptions of the Ecological Impacts of Road Construction in Natural Ecosystems: A Cross-Disciplinary Comparison
Expert assessments of the ecological impacts of road construction in natural ecosystems were examined through a cross-disciplinary comparative perspective. Data were collected from experts in civil engineering, urban and regional planning, forest engineering, and landscape architecture. Responses to the Ecological Impacts of Road Construction in Natural Ecosystems (EIRCNE) scale were analyzed using exploratory factor analysis and comparative statistical tests. Five hypotheses (H1–H5) were developed to examine disciplinary differences in expert evaluations. Results indicated broad agreement on the overall ecological impacts of road construction, although discipline-specific differences emerged in perceptions of direct ecological damage and construction priorities. Factor analysis confirmed a multidimensional structure of expert assessments (KMO = 0.810; χ2 = 1665.219; df = 435; p < 0.001). Hypotheses concerning direct ecological damage (H2) and construction priorities (H5) were supported, whereas no significant disciplinary differences were detected for indirect effects or managerial processes (H3 and H4). These findings suggest that evaluating road planning and construction solely from a technical perspective may overlook important ecological dimensions. The study provides empirical evidence from Türkiye regarding how experts from different professional disciplines perceive and prioritize the ecological impacts of road construction and highlights the importance of incorporating diverse disciplinary perspectives into environmental decision-making processes.
Open AccessExpert Perceptions of the Ecological Impacts of Road Construction in Natural Ecosystems: A Cross-Disciplinary Comparison
Expert assessments of the ecological impacts of road construction in natural ecosystems were examined through a cross-disciplinary comparative perspective. Data were collected from experts in civil engineering, urban and regional planning, forest engineering, and landscape architecture. Responses to the Ecological Impacts of Road Construction in Natural Ecosystems (EIRCNE) scale were analyzed using exploratory factor analysis and comparative statistical tests. Five hypotheses (H1–H5) were developed to examine disciplinary differences in expert evaluations. Results indicated broad agreement on the overall ecological impacts of road construction, although discipline-specific differences emerged in perceptions of direct ecological damage and construction priorities. Factor analysis confirmed a multidimensional structure of expert assessments (KMO = 0.810; χ2 = 1665.219; df = 435; p < 0.001). Hypotheses concerning direct ecological damage (H2) and construction priorities (H5) were supported, whereas no significant disciplinary differences were detected for indirect effects or managerial processes (H3 and H4). These findings suggest that evaluating road planning and construction solely from a technical perspective may overlook important ecological dimensions. The study provides empirical evidence from Türkiye regarding how experts from different professional disciplines perceive and prioritize the ecological impacts of road construction and highlights the importance of incorporating diverse disciplinary perspectives into environmental decision-making processes.
- Open Access
- 25 December 2025
- Published by European Journal of Forest Engineering in European Journal of Forest Engineering
- Vol. 11 (2) , 174-183
Evaluation of the Importance Levels of Legal Responsibilities of Employers and Workers in Terms of Occupational Health and Safety with the AHP Approach
In case of an occupational accident, the responsible party is identified by assessing fault rates in terms of occupational health and safety (OHS). This is based on the responsibilities defined for employers and employees in both international and national legal regulations regarding OHS. However, the legal regulations do not include an assessment of the fault rates associated with the scale of these responsibilities. This study aims to prioritize the legal responsibilities of employers and employees in OSH using the Analytic Hierarchy Process (AHP). Eleven responsibility criteria were identified based on international and national OSH regulations: seven for employers and four for employees. Face-to-face interviews were conducted with 52 experts, including OSH specialists and forest engineers. The results showed employers held a significantly larger share of OSH responsibilities (67.9%) compared to employees (32.1%). The most important employer responsibilities were providing personal protective equipment (PPE) to workers (14%), providing training to workers (13%), and conducting risk assessments (12%). For employees, the most critical responsibilities were avoiding risky situations (9%), refraining from behaviors that pose a risk to OSH (8%), and reporting hazards to employers (8%). The priority levels of employer and employee responsibilities determined in this study will help ensure a fair assessment of the fault percentages in occupational accidents. The results contribute to a more structured and quantitative approach to OSH responsibility allocation, emphasizing the need for a clear delineation of responsibilities and the implementation of robust training and risk management systems to ensure workplace safety. Effective collaboration between employers and employees, supported by adequate training, communication, and risk mitigation strategies, is essential to reduce workplace accidents and ensure long-term compliance with OSH regulations.
- 25 December 2025
- Published by European Journal of Forest Engineering in European Journal of Forest Engineering
- Vol. 11 (2) , 174-183
Open AccessEvaluation of the Importance Levels of Legal Responsibilities of Employers and Workers in Terms of Occupational Health and Safety with the AHP Approach
In case of an occupational accident, the responsible party is identified by assessing fault rates in terms of occupational health and safety (OHS). This is based on the responsibilities defined for employers and employees in both international and national legal regulations regarding OHS. However, the legal regulations do not include an assessment of the fault rates associated with the scale of these responsibilities. This study aims to prioritize the legal responsibilities of employers and employees in OSH using the Analytic Hierarchy Process (AHP). Eleven responsibility criteria were identified based on international and national OSH regulations: seven for employers and four for employees. Face-to-face interviews were conducted with 52 experts, including OSH specialists and forest engineers. The results showed employers held a significantly larger share of OSH responsibilities (67.9%) compared to employees (32.1%). The most important employer responsibilities were providing personal protective equipment (PPE) to workers (14%), providing training to workers (13%), and conducting risk assessments (12%). For employees, the most critical responsibilities were avoiding risky situations (9%), refraining from behaviors that pose a risk to OSH (8%), and reporting hazards to employers (8%). The priority levels of employer and employee responsibilities determined in this study will help ensure a fair assessment of the fault percentages in occupational accidents. The results contribute to a more structured and quantitative approach to OSH responsibility allocation, emphasizing the need for a clear delineation of responsibilities and the implementation of robust training and risk management systems to ensure workplace safety. Effective collaboration between employers and employees, supported by adequate training, communication, and risk mitigation strategies, is essential to reduce workplace accidents and ensure long-term compliance with OSH regulations.
- Open Access
- 15 October 2025
- Published by Artvin Coruh Universitesi Orman Fakultesi Dergisi in Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi
- Vol. 26 (2) , 343-354
Orman Ağaçlandırma Faaliyetlerinin İnsansız Hava Aracı (İHA) Kullanılarak Planlanması: Artvin Örneği
Bu çalışmada, orman ekosistemlerinde gerçekleştirilen ağaçlandırma ve bakım faaliyetlerinin planlanmasında insansız hava aracı (İHA) teknolojisinin doğruluk analizi araştırılmıştır. Artvin Orman İşletme Şefliği sınırlarında 2019 yılında ağaçlandırılmış, alanı ve ortalama eğimi sırasıyla 3.5 ha ve %60 olan ormanlık saha çalışma alanı olarak seçilmiştir. Çalışma alanında Meridian M6 model GPS/GNSS ile elde edilen yersel fotogrametrik veriler ile gerçekleştirilen toplam 24 adet teras üzerine 3 m aralıklarla sarıçam (Pinus sylvestris L.) (800 adet) ve fıstık çamı (Pinus pinea L.) (200 adet) fidanları dikilmiştir. Alanın Sayısal Arazi Modeli ve ortofoto haritasının üretimi için Nisan 2025 tarihinde DJI Mavic 3 Enterprise cihazı ile İHA görüntüleri alınmıştır. Uçuş öncesinde alanda üç adet yer kontrol noktası (YKN) yapılarak Meridian M6 marka CORS cihazı kullanılarak RTK yöntemi ile konumları belirlenmiştir. Çalışma alanında 2.02 cm yer örnekleme aralığında 9 kolon ile İHA uçuşu planlanarak 41.8 m yükseklikte %80 ön bindirme ve %70 yan bindirme oranıyla 188 görüntü elde edilmiştir. ArcGIS 10.2 ve Google Earth Pro yazılımları kullanılarak PIX4D yazılımında işlenen görüntüler üzerinde hesaplamalar yapılmıştır. Yersel ölçüm ve İHA ile elde edilen verilere göre mevcut durumdaki teras uzunlukları ve ağaç sayıları karşılaştırılarak İHA yönteminin etkinlik oranı sırasıyla %99.4 ve %98.8 olarak belirlenmiştir. Çalışma alanındaki ağaçlandırma faaliyetleri yersel olarak beş kişi ile iki günde gerçekleştirilirken İHA ile bir operatör tarafından yarım günde gerçekleştirilebildiği belirlenmiştir. Bu durum ağaçlandırma faaliyetlerinin İHA verileri ile planlanmasının hem zamansal hem de ekonomik olarak önemli katkılar sunduğunu göstermiştir.
- 15 October 2025
- Published by Artvin Coruh Universitesi Orman Fakultesi Dergisi in Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi
- Vol. 26 (2) , 343-354
Open AccessOrman Ağaçlandırma Faaliyetlerinin İnsansız Hava Aracı (İHA) Kullanılarak Planlanması: Artvin Örneği
Bu çalışmada, orman ekosistemlerinde gerçekleştirilen ağaçlandırma ve bakım faaliyetlerinin planlanmasında insansız hava aracı (İHA) teknolojisinin doğruluk analizi araştırılmıştır. Artvin Orman İşletme Şefliği sınırlarında 2019 yılında ağaçlandırılmış, alanı ve ortalama eğimi sırasıyla 3.5 ha ve %60 olan ormanlık saha çalışma alanı olarak seçilmiştir. Çalışma alanında Meridian M6 model GPS/GNSS ile elde edilen yersel fotogrametrik veriler ile gerçekleştirilen toplam 24 adet teras üzerine 3 m aralıklarla sarıçam (Pinus sylvestris L.) (800 adet) ve fıstık çamı (Pinus pinea L.) (200 adet) fidanları dikilmiştir. Alanın Sayısal Arazi Modeli ve ortofoto haritasının üretimi için Nisan 2025 tarihinde DJI Mavic 3 Enterprise cihazı ile İHA görüntüleri alınmıştır. Uçuş öncesinde alanda üç adet yer kontrol noktası (YKN) yapılarak Meridian M6 marka CORS cihazı kullanılarak RTK yöntemi ile konumları belirlenmiştir. Çalışma alanında 2.02 cm yer örnekleme aralığında 9 kolon ile İHA uçuşu planlanarak 41.8 m yükseklikte %80 ön bindirme ve %70 yan bindirme oranıyla 188 görüntü elde edilmiştir. ArcGIS 10.2 ve Google Earth Pro yazılımları kullanılarak PIX4D yazılımında işlenen görüntüler üzerinde hesaplamalar yapılmıştır. Yersel ölçüm ve İHA ile elde edilen verilere göre mevcut durumdaki teras uzunlukları ve ağaç sayıları karşılaştırılarak İHA yönteminin etkinlik oranı sırasıyla %99.4 ve %98.8 olarak belirlenmiştir. Çalışma alanındaki ağaçlandırma faaliyetleri yersel olarak beş kişi ile iki günde gerçekleştirilirken İHA ile bir operatör tarafından yarım günde gerçekleştirilebildiği belirlenmiştir. Bu durum ağaçlandırma faaliyetlerinin İHA verileri ile planlanmasının hem zamansal hem de ekonomik olarak önemli katkılar sunduğunu göstermiştir.
- 28 August 2024
- Published by Hrvatsko Sumarsko Drustvo in Šumarski list
- Vol. 148 (7-8) , 363-373
A comparison of the risk analyses for harvesting activities under different conditions
Today, it is mandatory for all employers to conduct risk analysis because of legal regulations and the increased importance attached to occupational safety and health (OSH) by society. Each harvesting unit has a unique topography, climate, type of machine or equipment, tree species, harvesting time (summer/winter), and external threats. Therefore, it is necessary to carefully identify the potential risks for each harvesting unit. This study compared the risk scores of forest harvesting in the Black Sea, Mediterranean, Aegean, Marmara, and Southeastern Anatolia regions of Türkiye with different geographical conditions. The risk analysis was conducted with a total of 338 harvesting workers from these regions. Twenty-nine hazards, categorized into six main classes, were identified via literature review, field observations, and expert opinions. Risk analysis was performed using the L-type matrix method. After that, the Chi-square test analyzed whether the risk scores determined for each geographic region differed or not. The results revealed significant differences in the results of risk analyses of harvesting activities between regions (c2 = 97.357; p<.001). While these differences were determined generally in the physical, psychosocial, and worker-related hazard classes, an obvious difference in biological or chemical hazard classes was not determined statistically. The results of the risk analysis obtained from the study will contribute to the identification of the risks that should be taken into consideration primarily for the examined regions and the implementation of measurements. Moreover, this study serves as a model for conducting risk analysis for other regions, to facilitate informed decision-making concerning OSH.
- 28 August 2024
- Published by Hrvatsko Sumarsko Drustvo in Šumarski list
- Vol. 148 (7-8) , 363-373
A comparison of the risk analyses for harvesting activities under different conditions
Today, it is mandatory for all employers to conduct risk analysis because of legal regulations and the increased importance attached to occupational safety and health (OSH) by society. Each harvesting unit has a unique topography, climate, type of machine or equipment, tree species, harvesting time (summer/winter), and external threats. Therefore, it is necessary to carefully identify the potential risks for each harvesting unit. This study compared the risk scores of forest harvesting in the Black Sea, Mediterranean, Aegean, Marmara, and Southeastern Anatolia regions of Türkiye with different geographical conditions. The risk analysis was conducted with a total of 338 harvesting workers from these regions. Twenty-nine hazards, categorized into six main classes, were identified via literature review, field observations, and expert opinions. Risk analysis was performed using the L-type matrix method. After that, the Chi-square test analyzed whether the risk scores determined for each geographic region differed or not. The results revealed significant differences in the results of risk analyses of harvesting activities between regions (c2 = 97.357; p<.001). While these differences were determined generally in the physical, psychosocial, and worker-related hazard classes, an obvious difference in biological or chemical hazard classes was not determined statistically. The results of the risk analysis obtained from the study will contribute to the identification of the risks that should be taken into consideration primarily for the examined regions and the implementation of measurements. Moreover, this study serves as a model for conducting risk analysis for other regions, to facilitate informed decision-making concerning OSH.
- 1 January 2024
- Published by ALOKI Ltd in Applied Ecology and Environmental Research
- Vol. 22 (5) , 4259-4275
A COMPARATIVE ANALYSIS OF FOREST ENGINEERS’ OPINIONS ON FOREST ROAD CONSTRUCTION IN TÜRKIYE
- 1 January 2024
- Published by ALOKI Ltd in Applied Ecology and Environmental Research
- Vol. 22 (5) , 4259-4275
A COMPARATIVE ANALYSIS OF FOREST ENGINEERS’ OPINIONS ON FOREST ROAD CONSTRUCTION IN TÜRKIYE
- Open Access
- 31 January 2020
- Published by Duzce Universitesi Bilim ve Teknoloji Dergisi in Düzce Üniversitesi Bilim ve Teknoloji Dergisi
- Vol. 8 (1) , 535-545
Web Tabanlı Bitki Bilgi Sitemi (BBS): Karadeniz Teknik Üniversitesi Kanuni Yerleşkesi Örneği
Günümüzde, şehir yaşamındaki stres, beton çevre, trafik ve kirlilik gibi olumsuz yaşam koşulları nedeniyle insanların bu alanlardan uzaklaşarak doğanın sunduğu doğal güzelliklerden yararlanma istekleri artmaktadır. Eğlenme ya da dinlenme amaçlı olarak ziyaret edilen; milli park, tabiat parkı, botanik parkı ya da arboretum sahalarında insanlar çok sayıda ve farklı bitki türleriyle karşılaşırlar. Daha önce değişik milli park, botanik parkları ve üniversite kampüslerinde yapılan gözlemlerde ziyaretçilerin ve kullanıcıların/öğrencilerin birçoğunun alanda bulunan bitki türlerinin isim ve özellikleri hakkında bilgi sahibi olmak istedikleri gözlemlenmiştir. Bu çalışmada, gelişen teknoloji ile kullanımı yaygınlaşmakta olan “Open Data” kavramından esinlenerek bitkilerin botanik özelliklerini içeren kare kodlar oluşturulması ve kullanıcıların mobil cihazları aracılığıyla bu bilgilere direk ulaşımını sağlayan bir yazılım geliştirilmesi amaçlanmıştır. Çalışma alanı olarak çok sayıda değişik ağaç, ağaççık ve çalı türü barındıran Karadeniz Teknik Üniversitesi Kanuni Kampüsü seçilmiştir. Kampüste en yaygın olarak bulunan 13 ağaç türünün botanik özellikleri, görselleri ve konumlarını içeren bir veri tabanı oluşturulmuş ve her biri için kare kod geliştirilmiştir. Yazılım, Karadeniz Teknik Üniversitesi web ara yüzünden yararlanarak Leaflet aracı yardımıyla HTML editörlerinden Visual Studio Code programında yazılmıştır. Kullanıcıların mobil cihazları ile kare kodların barındırdığı öznitelik bilgilerine ve OpenStreetMap açık kaynaklı kod sistemi ile konumsal bilgilerine kolaylıkla ulaşabilmesi sağlanmıştır. Bu çalışma kapsamında geliştirilen Web-BBS programı, çok sayıda ziyaretçi çeken değişik bitki müzeleri için örnek teşkil edecektir.
- 31 January 2020
- Published by Duzce Universitesi Bilim ve Teknoloji Dergisi in Düzce Üniversitesi Bilim ve Teknoloji Dergisi
- Vol. 8 (1) , 535-545
Open AccessWeb Tabanlı Bitki Bilgi Sitemi (BBS): Karadeniz Teknik Üniversitesi Kanuni Yerleşkesi Örneği
Günümüzde, şehir yaşamındaki stres, beton çevre, trafik ve kirlilik gibi olumsuz yaşam koşulları nedeniyle insanların bu alanlardan uzaklaşarak doğanın sunduğu doğal güzelliklerden yararlanma istekleri artmaktadır. Eğlenme ya da dinlenme amaçlı olarak ziyaret edilen; milli park, tabiat parkı, botanik parkı ya da arboretum sahalarında insanlar çok sayıda ve farklı bitki türleriyle karşılaşırlar. Daha önce değişik milli park, botanik parkları ve üniversite kampüslerinde yapılan gözlemlerde ziyaretçilerin ve kullanıcıların/öğrencilerin birçoğunun alanda bulunan bitki türlerinin isim ve özellikleri hakkında bilgi sahibi olmak istedikleri gözlemlenmiştir. Bu çalışmada, gelişen teknoloji ile kullanımı yaygınlaşmakta olan “Open Data” kavramından esinlenerek bitkilerin botanik özelliklerini içeren kare kodlar oluşturulması ve kullanıcıların mobil cihazları aracılığıyla bu bilgilere direk ulaşımını sağlayan bir yazılım geliştirilmesi amaçlanmıştır. Çalışma alanı olarak çok sayıda değişik ağaç, ağaççık ve çalı türü barındıran Karadeniz Teknik Üniversitesi Kanuni Kampüsü seçilmiştir. Kampüste en yaygın olarak bulunan 13 ağaç türünün botanik özellikleri, görselleri ve konumlarını içeren bir veri tabanı oluşturulmuş ve her biri için kare kod geliştirilmiştir. Yazılım, Karadeniz Teknik Üniversitesi web ara yüzünden yararlanarak Leaflet aracı yardımıyla HTML editörlerinden Visual Studio Code programında yazılmıştır. Kullanıcıların mobil cihazları ile kare kodların barındırdığı öznitelik bilgilerine ve OpenStreetMap açık kaynaklı kod sistemi ile konumsal bilgilerine kolaylıkla ulaşabilmesi sağlanmıştır. Bu çalışma kapsamında geliştirilen Web-BBS programı, çok sayıda ziyaretçi çeken değişik bitki müzeleri için örnek teşkil edecektir.
- Open Access
- 15 September 2019
- Published by Artvin Coruh Universitesi Orman Fakultesi Dergisi in Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi
- Vol. 20 (2) , 172-180
Endüstriyel odundaki sürütme zararlarının hasat mevsimine göre karşılaştırılması
Dünyada çok sayıda kullanım alanı olan odun hammaddesinin değerinin belirlenmesinde dikkate alınan ana parametreler; ürünün vasfı (tomruk, direklik, sanayi odunu ya da yakacak odun gibi), kalite sınıfı ve miktarıdır. Odun hammaddesinin vasfına ve kalite sınıfına göre birim fiyatlarının farklı olması nedeniyle ürünlerin değerleri de önemli oranda değişir. Ülkemizde mevcut orman yollarının standartlarının uygun olmaması ve mekanizasyonun fazla gelişmemiş olması nedeniyle büyük oranda tomruk üretimi yapılmakta ve zemin üzerinde kaydırma/sürütme teknikleri kullanılmaktadır. Bu çalışmanın amacı, eğimli ormanlarda yukarıdan aşağıya doğru kontrolsüz kaydırma ile gerçekleştirilen bölmeden çıkarma çalışmalarında tomruklarda oluşan kalite ve miktar kayıplarının hasat mevsimine göre farklılık gösterip göstermediğinin karşılaştırılmasıdır. Çalışma, Doğu Karadeniz Bölgesinde yarısı yaz mevsiminde ve yarısı kış mevsiminde zemin üzerinde kaydırma tekniği uygulanan toplam on altı adet hasat biriminde gerçekleştirilmiştir. Çalışma kapsamında kaydırma faaliyetlerinden önce ve sonra; tomrukların kalite sınıfları belirlenmiş, çap ve boyları ölçülmüş ve hacimleri hesaplanmıştır. Ayrıca sürütme sonrasında odunlarda meydana gelen kırılma, çatlama, saçaklanma ve yaralanma gibi zarar tipleri ve zararların tomruk üzerindeki yeri tespit edilmiş, zararların boyutları ölçülmüştür. Kış mevsiminde tomruklarda oluşan zararlar yaz mevsimine oranla belirgin olarak daha az bulunmuştur. Yapılan bağımsız örneklem t testi analizinde hasat mevsimi ile zararın yeri, tipi ve odunun boyu arasında %95 güven düzeyinde (P<0.05) bir fark olduğu belirlenmiştir. Yaz mevsiminde özellikle tomrukların uç kısımlarında oluşan zararları azaltmak için tomruk başlarına polietilen tomruk konisi takılması uygun olacaktır. Özellikle zeminin engebeli olduğu durumlarda gövde üzerindeki zararların önüne geçmek için yapay bir güzergah üzerinde kontrollü sürütme tekniği ya da havai sistemler kullanılmalıdır.
- 15 September 2019
- Published by Artvin Coruh Universitesi Orman Fakultesi Dergisi in Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi
- Vol. 20 (2) , 172-180
Open AccessEndüstriyel odundaki sürütme zararlarının hasat mevsimine göre karşılaştırılması
Dünyada çok sayıda kullanım alanı olan odun hammaddesinin değerinin belirlenmesinde dikkate alınan ana parametreler; ürünün vasfı (tomruk, direklik, sanayi odunu ya da yakacak odun gibi), kalite sınıfı ve miktarıdır. Odun hammaddesinin vasfına ve kalite sınıfına göre birim fiyatlarının farklı olması nedeniyle ürünlerin değerleri de önemli oranda değişir. Ülkemizde mevcut orman yollarının standartlarının uygun olmaması ve mekanizasyonun fazla gelişmemiş olması nedeniyle büyük oranda tomruk üretimi yapılmakta ve zemin üzerinde kaydırma/sürütme teknikleri kullanılmaktadır. Bu çalışmanın amacı, eğimli ormanlarda yukarıdan aşağıya doğru kontrolsüz kaydırma ile gerçekleştirilen bölmeden çıkarma çalışmalarında tomruklarda oluşan kalite ve miktar kayıplarının hasat mevsimine göre farklılık gösterip göstermediğinin karşılaştırılmasıdır. Çalışma, Doğu Karadeniz Bölgesinde yarısı yaz mevsiminde ve yarısı kış mevsiminde zemin üzerinde kaydırma tekniği uygulanan toplam on altı adet hasat biriminde gerçekleştirilmiştir. Çalışma kapsamında kaydırma faaliyetlerinden önce ve sonra; tomrukların kalite sınıfları belirlenmiş, çap ve boyları ölçülmüş ve hacimleri hesaplanmıştır. Ayrıca sürütme sonrasında odunlarda meydana gelen kırılma, çatlama, saçaklanma ve yaralanma gibi zarar tipleri ve zararların tomruk üzerindeki yeri tespit edilmiş, zararların boyutları ölçülmüştür. Kış mevsiminde tomruklarda oluşan zararlar yaz mevsimine oranla belirgin olarak daha az bulunmuştur. Yapılan bağımsız örneklem t testi analizinde hasat mevsimi ile zararın yeri, tipi ve odunun boyu arasında %95 güven düzeyinde (P<0.05) bir fark olduğu belirlenmiştir. Yaz mevsiminde özellikle tomrukların uç kısımlarında oluşan zararları azaltmak için tomruk başlarına polietilen tomruk konisi takılması uygun olacaktır. Özellikle zeminin engebeli olduğu durumlarda gövde üzerindeki zararların önüne geçmek için yapay bir güzergah üzerinde kontrollü sürütme tekniği ya da havai sistemler kullanılmalıdır.
- Open Access
- 29 June 2019
- Published by European Journal of Forest Engineering in European Journal of Forest Engineering
- Vol. 5 (1) , 11-17
Investigation of Relevance Between Landslide and Stand Areas on Open Source Web Map (Openlayers): Case Study in Trabzon Region
In recent years, the developments in computer technology are as effective in forestry as in many sectors. Open source web map based Geographic Information Systems (GIS) offer a significant advantage in investigating forest structure. When using in open source web maps, the relationships between the data of different features can be evaluated effectively and accurately. In this study, the relationship between online landslide data and online stand data was investigated by coding a web interface with OpenLayers which is one of the common open source web maps. OpenLayers based landslide areas and ArcGIS Web Services based stand areas have been evaluated in the solution process. The parameters of the landslide stands have been evaluated in a case study conducted in Trabzon Regional Directorate of Forestry. Landslide data were obtained from the General Directorate of Mineral Research and Exploration, while stands data were obtained from General Directorate of Forestry. The results indicated that most of the active landslide areas consisted of pure stands (26.71%), mixed stands (20.50%), and agricultural areas (38.51%). It was found that 14.29% of active landslide areas consisted of degraded forest and open areas while 38.51% consisted of agricultural lands. The results also indicated that stands with sparse crown closure covered 32.30% of the active landslide areas, while moderate and dense crown closures covered 12.42% and 2.48%, respectively. It was revealed that percentages of landslide areas were high in stands with low crown closure due to effects of heavy rain on the soil. It was also found that mostly tree species with narrow canopy and shallow root formation are subject to landslide incidents. This study suggested that OSWMs can be effectively used to investigate landslide activities in forest areas. It is anticipated that sharing open source data through online databases will provide great opportunity for practitioners and researchers in the field of forestry.
- 29 June 2019
- Published by European Journal of Forest Engineering in European Journal of Forest Engineering
- Vol. 5 (1) , 11-17
Open AccessInvestigation of Relevance Between Landslide and Stand Areas on Open Source Web Map (Openlayers): Case Study in Trabzon Region
In recent years, the developments in computer technology are as effective in forestry as in many sectors. Open source web map based Geographic Information Systems (GIS) offer a significant advantage in investigating forest structure. When using in open source web maps, the relationships between the data of different features can be evaluated effectively and accurately. In this study, the relationship between online landslide data and online stand data was investigated by coding a web interface with OpenLayers which is one of the common open source web maps. OpenLayers based landslide areas and ArcGIS Web Services based stand areas have been evaluated in the solution process. The parameters of the landslide stands have been evaluated in a case study conducted in Trabzon Regional Directorate of Forestry. Landslide data were obtained from the General Directorate of Mineral Research and Exploration, while stands data were obtained from General Directorate of Forestry. The results indicated that most of the active landslide areas consisted of pure stands (26.71%), mixed stands (20.50%), and agricultural areas (38.51%). It was found that 14.29% of active landslide areas consisted of degraded forest and open areas while 38.51% consisted of agricultural lands. The results also indicated that stands with sparse crown closure covered 32.30% of the active landslide areas, while moderate and dense crown closures covered 12.42% and 2.48%, respectively. It was revealed that percentages of landslide areas were high in stands with low crown closure due to effects of heavy rain on the soil. It was also found that mostly tree species with narrow canopy and shallow root formation are subject to landslide incidents. This study suggested that OSWMs can be effectively used to investigate landslide activities in forest areas. It is anticipated that sharing open source data through online databases will provide great opportunity for practitioners and researchers in the field of forestry.