Protima Rauwel

Since the publication of the 12 principles of green chemistry in 1998 by Paul Anastas and John Warner, the green synthesis of metal and metal oxide nanoparticles has emerged as an eco-friendly and sustainable alternative to conventional chemical methods. Plant-based synthesis utilizes natural extracts as reducing and stabilizing agents, minimizing harmful chemicals and toxic by-products. Ag nanoparticles (Ag-NPs) exhibit strong antibacterial activity; Au nanoparticles (Au-NPs) are seen as a promising carrier for drug delivery and diagnostics because of their easy functionalization and biocompatibility; and ZnO nanoparticles (ZnO-NPs), on the other hand, produce reactive oxygen species (ROS) that kill microorganisms effectively. These nanoparticles also demonstrate antioxidant properties by scavenging free radicals, reducing oxidative stress, and preventing degenerative diseases. Green syntheses based on plant extracts enhance biocompatibility and therapeutic efficacy, making them suitable for antimicrobial, anticancer, and antioxidant applications. Applying a similar “green synthesis” for advanced nanostructures like graphitic carbon nitride (GCN) is an environmentally friendly alternative to the traditional ways of doing things. GCN exhibits exceptional photocatalytic activity, pollutant degradation efficiency, and electronic properties, with applications in environmental remediation, energy storage, and biomedicine. This review highlights the potential of green-synthesized hybrid nanocomposites combining nanoparticles and GCN as sustainable solutions for biomedical and environmental challenges. The review also highlights the need for the creation of a database using a machine learning process that will enable providing a clear vision of all the progress accomplished till now and identify the most promising plant extracts that should be used for targeted applications.

In this work, a comparison of the photocatalytic activity of free-standing Cu-based nanoparticle mixtures and spin-coated nanoparticle films under visible-light radiation is conducted. Herein, Cu₂O, Cu₂O-Cu, Cu₂O-Cu₃N-Cu, and Cu₃N-Cu nanoparticle mixtures were successfully synthesized by a non-aqueous sol–gel route and then deposited on a glass substrate by spin-coating. The surface chemistry of the nanoparticles studied by X-ray photoelectron spectroscopy (XPS) allowed elucidating the nanoparticle synthesis mechanism. The UV–Vis absorption spectroscopy illustrates that photocatalytic activity is attributed to the high specific surface of the nanoparticles and their wider absorption range region from 500 to 1100 nm. Unlike the free-standing photocatalysts, the photocatalytic effect of spin-coated nanoparticle films enabled their facile reclamation, which solves a key issue for practical applications of the photocatalysts. The photocatalytic performances on neutral red and malachite green organic dyes were influenced by the type of visible light sources, i.e., solar simulator and natural sunlight. The results indicate that photodegradation efficiency is the highest for Cu₂O nanoparticles, reaching values of 82% for neutral red and 94% for malachite green. We also demonstrate that the degradation of cationic neutral red undergoes a photoconversion to its neutral form during the degradation process, which in turn, lowers its degradation efficiency. On the other hand, higher degradation efficiency was observed on malachite green owing to its unique cationic form, soluble in aqueous solutions.

This work reports on the fabrication of ZnO polymer-based hybrid ultraviolet (UV) photodiodes with a configuration of ITO/ZnO-nanorod/F8BT/PEDOT:PSS/Ag. The diode was fabricated by spin-coating p-type F8BT and PEDOT:PSS polymers on hydrothermally grown n-type ZnO nanorods. The growth of ZnO nanorods was carried out by varying seed layer alcohols, viz., methanol, ethanol, isopropanol, and aqueous ethanol (70% alcohol). These solvents influenced the nanorod diameter, surface coverage, and surface defects. Herein, we demonstrate that the uniformity and defects in ZnO nanorods govern the electrical properties, photoresponse, and figures of merit of the photodiodes. In particular, the photodiodes are evaluated on their rectification ratio, ideality factor (η), responsivity (R), external quantum efficiency (EQE), and response time (Tdecay). The photodiode fabricated with ZnO nanorods grown on the methanol seeding layer has demonstrated the best performance, owing to the uniform surface coverage of the nanorods. It also presented the highest rectification ratio of ∼640, a Tdecay of 108 s, a η of 2, an EQE of ∼2760%, and an R of ∼8.14 A/W at −2 V.

Antimicrobial resistance is a menace to public health on a global scale. In this regard, nanomaterials exhibiting antimicrobial properties represent a promising solution. Both metal and metal oxide nanomaterials are suitable candidates, even though their mechanisms of action vary. Multiple antimicrobial mechanisms can occur simultaneously or independently; this includes either direct contact with the pathogens, nanomaterial uptake, oxidative stress, ion release, or any of their combinations. However, due to their specific properties and more particularly fast settling, existing methods to study the antimicrobial properties of nanoparticles have not been specifically adapted in some cases. The development of methodologies that can assess the antimicrobial properties of metallic nanomaterials accurately is necessary. A cost-effective methodology with a straightforward set-up that enables the easy and quick assessment of the antimicrobial properties of metal nanoparticles with high accuracy has been developed. The methodology is also capable of confirming whether the killing mechanism involves ionic diffusion. Finally, Aloe Vera gel showed good properties for use as a medium for the development of antimicrobial ointment.

Functionalization of nanocarbon materials with heteroatoms is of paramount interest as doping of carbon with electron withdrawing groups results in change of electrochemical properties of the potential catalyst. Adding fluorine, as the most electronegative element into the doping process next to boron is expected to have significant effect on the design of novel nanocarbon‐based electrocatalysts. In this paper boron and fluorine co‐doped reduced graphene oxide/few‐walled carbon nanotube (BF‐rGO/FWCNT) catalysts are synthesized via simple and low‐cost direct pyrolysis method using boron trifluoride diethyl etherate (BTDE). Composition analysis confirmed that boron and fluorine have been grafted onto the carbon support. Rotating disk electrode (RDE) measurements revealed that BF‐rGO/FWCNT has remarkable electrocatalytic activity toward the oxygen reduction reaction (ORR) both in alkaline and acid media. The onset potential of the best BF‐rGO/FWCNT catalyst was 50 mV more positive in alkaline and 600 mV more positive in acidic media compared with un‐doped rGO/FWCNT. The half‐wave potential was 100 mV more positive in alkaline media and 700 mV more positive in acidic media in comparison with un‐doped rGO/FWCNT.

The present energy crisis has encouraged the use of energy-efficient devices and green energy sources

We report on the synthesis of ZnO nanoparticles and ZnO hierarchical nanorod structures using four different alcohols i.e. methanol, isopropanol, ethanol, and aqueous ethanol (70% alcohol, 30% water). The syntheses of the nanoparticles were carried out by non-aqueous and hydrothermal routes. In general, absolute alcohol allows a better control of the synthesis reaction and nanoparticles as small as 5 nm were obtained, confirmed by TEM. XPS analysis elucidated the chemical states that were correlated to the synthesis reaction. For the nanorod growth, these four alcohols were used as seeding solvents, followed by hydrothermal ZnO nanorod growth. Here, the seed layer tailored the nanorod diameters and surface defects, which were studied by SEM and photoluminescence spectroscopy. Subsequently, the ZnO nanorods were electrically characterized and exhibited persistent photoconductivity under UV irradiation of 365 nm. The differences in conductivity in dark and under UV irradiation were attributed to the size of the nanorods, defect states, semiconductor band bending and oxygen adsorption–desorption mechanisms. Parameters such as photoresponse and photosensitivity are also calculated in order to evaluate their applicability in UV sensors. This work demonstrates optimization of the physical, chemical, electrical and optical properties of both ZnO nanostructures via the use of alcoholic solvents.