Zhiyong Pan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhiyong Pan has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Liang Wang
Nanjing University of Aeronautics and Astronautics
3 shared publications - Haoren Feng
State Key Laboratory of Mechanics and Control for Aerospace Structures, Nanjing University of Aeronautics and Astronautics, No. 29 Yudao, Nanjing 210016, China
2 shared publications Jiamei Jin
2 shared publications- Jiamei Jin
Nanjing University of Aeronautics and Astronautics
2 shared publications Ying Yang
2 shared publicationsChenhao Wang
1 shared publication
Latest Publications
- Top Cited Papers
- 5 January 2026
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 311
Multi-degree-of-freedom piezoelectric actuators: Recent advances and challenges
- 5 January 2026
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 311
Top Cited PapersMulti-degree-of-freedom piezoelectric actuators: Recent advances and challenges
- 19 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (7) , 7275-7286
A Novel 2-DOF Frame-Type Rotary Piezoelectric Actuator: Design, Dynamic Modeling, and Experimental Evaluation
Traditional multi-degree-of-freedom actuators suffer from low manipulation accuracy, poor electromagnetic compatibility, and considerable system complexity, due to their structure, operating principle, and transmission limitations. To address these issues, a novel two-degree-of-freedom rotary piezoelectric actuator with a frame stator is proposed, which utilizes the principle of modal coupling to form an elliptical trajectory for actuation. The key dimensions of the frame stator are optimized to enhance the output performance by creating its dynamic model. The experimental results indicate that the actuator prototype achieves a start/stop response time of less than 20 ms in both x- and y-axis directions, with angular displacement resolutions of 7.2 μrad and 7.4 μrad, respectively, highlighting its rapid response and high positioning accuracy. Ultimately, the feasibility of the potential application of the prototype is verified through load experiments, which provides a new approach for advancing optical pointing mechanisms.
- 19 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (7) , 7275-7286
A Novel 2-DOF Frame-Type Rotary Piezoelectric Actuator: Design, Dynamic Modeling, and Experimental Evaluation
Traditional multi-degree-of-freedom actuators suffer from low manipulation accuracy, poor electromagnetic compatibility, and considerable system complexity, due to their structure, operating principle, and transmission limitations. To address these issues, a novel two-degree-of-freedom rotary piezoelectric actuator with a frame stator is proposed, which utilizes the principle of modal coupling to form an elliptical trajectory for actuation. The key dimensions of the frame stator are optimized to enhance the output performance by creating its dynamic model. The experimental results indicate that the actuator prototype achieves a start/stop response time of less than 20 ms in both x- and y-axis directions, with angular displacement resolutions of 7.2 μrad and 7.4 μrad, respectively, highlighting its rapid response and high positioning accuracy. Ultimately, the feasibility of the potential application of the prototype is verified through load experiments, which provides a new approach for advancing optical pointing mechanisms.
- 15 February 2024
- Published by Elsevier in Ceramics International
- Vol. 50 (10) , 17106-17115
Enhanced and reliable high-power performance of PMN–PZT-based piezoelectric ceramics
- 15 February 2024
- Published by Elsevier in Ceramics International
- Vol. 50 (10) , 17106-17115
Enhanced and reliable high-power performance of PMN–PZT-based piezoelectric ceramics
- 22 November 2023
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 32 (12) , 125022
Design, simulation, and experimental investigation on a novel multi-drive pattern three-degree-of-freedom rotary piezoelectric motor
Three-degree-of-freedom (3-DOF) rotary piezoelectric motors often suffer from low positioning accuracy, complex excitation signals, and uneven preloading, limiting their application in precision drive systems. To address these issues, this study proposes a novel multi-drive pattern 3-DOF rotary piezoelectric motor, comprising a sandwich-type hollow cylindrical stator, a spherical rotor, and a pre-tightening structure. The proposed motor can operate in both inertial and traveling wave drive patterns. In the inertial drive pattern, the first-order and the third-order bending vibration modes of the stator are simultaneously excited by a sawtooth wave signal, generating a saw-tooth displacement on its driving feet to rotate the rotor around the x or y-axis. In the traveling wave drive pattern, two mutually orthogonal first-order bending vibration modes of the stator are simultaneously stimulated by two sinusoidal signals, generating a traveling wave on its driving feet to rotate the rotor around the z-axis. Initially, finite element analysis is used to simulate the operating principle of the stator and determine its geometric dimensions. Subsequently, a prototype of the sandwich-type hollow cylindrical stator is fabricated, and its vibration characteristics are tested to confirm the validation of the proposed operating principle and the correctness of the finite element simulation. Finally, a prototype of the proposed 3-DOF rotary piezoelectric motor is assembled, and its mechanical output characteristics are experimentally evaluated. Experimental results indicate that when the excitation voltage is 200 Vpp, the no-load rotary velocities of the motor prototype in three rotation directions are 79 r min−1, 76 r min−1, and 101 r min−1, respectively, start/stop response times are 10 ms/8.6 ms, 13.4 ms/6.2 ms, and 15.5 ms/7.7 ms, respectively, and the angular displacement resolutions are 7.4 μrad, 8 μrad, and 11.4 μrad, respectively. The proposed motor exhibits high mechanical integration, 3-DOF rotation, few excitation signals, adjustable pre-tightening force, and high positioning accuracy advantages, holding the potential applications in fields such as robotic technology and space pointing mechanisms.
- 22 November 2023
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 32 (12) , 125022
Design, simulation, and experimental investigation on a novel multi-drive pattern three-degree-of-freedom rotary piezoelectric motor
Three-degree-of-freedom (3-DOF) rotary piezoelectric motors often suffer from low positioning accuracy, complex excitation signals, and uneven preloading, limiting their application in precision drive systems. To address these issues, this study proposes a novel multi-drive pattern 3-DOF rotary piezoelectric motor, comprising a sandwich-type hollow cylindrical stator, a spherical rotor, and a pre-tightening structure. The proposed motor can operate in both inertial and traveling wave drive patterns. In the inertial drive pattern, the first-order and the third-order bending vibration modes of the stator are simultaneously excited by a sawtooth wave signal, generating a saw-tooth displacement on its driving feet to rotate the rotor around the x or y-axis. In the traveling wave drive pattern, two mutually orthogonal first-order bending vibration modes of the stator are simultaneously stimulated by two sinusoidal signals, generating a traveling wave on its driving feet to rotate the rotor around the z-axis. Initially, finite element analysis is used to simulate the operating principle of the stator and determine its geometric dimensions. Subsequently, a prototype of the sandwich-type hollow cylindrical stator is fabricated, and its vibration characteristics are tested to confirm the validation of the proposed operating principle and the correctness of the finite element simulation. Finally, a prototype of the proposed 3-DOF rotary piezoelectric motor is assembled, and its mechanical output characteristics are experimentally evaluated. Experimental results indicate that when the excitation voltage is 200 Vpp, the no-load rotary velocities of the motor prototype in three rotation directions are 79 r min−1, 76 r min−1, and 101 r min−1, respectively, start/stop response times are 10 ms/8.6 ms, 13.4 ms/6.2 ms, and 15.5 ms/7.7 ms, respectively, and the angular displacement resolutions are 7.4 μrad, 8 μrad, and 11.4 μrad, respectively. The proposed motor exhibits high mechanical integration, 3-DOF rotation, few excitation signals, adjustable pre-tightening force, and high positioning accuracy advantages, holding the potential applications in fields such as robotic technology and space pointing mechanisms.
- 4 May 2023
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 32 (6) , 065010
A novel bonded-type 3-degree-of-freedom ultrasonic motor: design, simulation, and experimental investigation
Most of 3-degree-of-freedom (3-DOF) ultrasonic motors generally have the problems of low positioning accuracy, difficulty to apply preload, and excessive longitudinal dimension, leading to the limitation in industrial application. To address these issues, a novel bonded-type 3-DOF ultrasonic motor, consists of a convex cylindrical stator, a pre-tightening force structure, and a hemispherical rotor, is proposed in this study. A quadratically polarized toroidal piezoelectric ceramic is bonded to the upper surface of the stator. Three vibration modes of the stator are excited by applying different excitation signals on the piezoelectric ceramic. By coupling any two of the three vibration modes, the elliptical motion of the driving feet of the convex cylindrical stator around the x, y, and z axes are excited, respectively. A novel pre-tightening force application method is proposed to adjust the contact between the stator and rotor. Under the action of friction, the elliptical motion of the driving feet in three directions drives the rotor to rotate around three axes, respectively. The vibration modes of the stator are first simulated by using the finite element method. In addition, the optimal structural dimensions of the stator and the elliptical motion trajectories of the driving feet are calculated. Finally, a prototype of the proposed 3-DOF ultrasonic motor is fabricated and experimentally investigated. The experimental results show that the no-load rotary velocities of the motor prototype in the three rotation directions are 25 r min−1, 22 r min−1, and 380 r min−1, respectively, its start/stop response time are 4.1 ms/3.9 ms, 6.3 ms/7.5 ms, and 6.1 ms/7.9 ms, respectively, and its angular displacement resolutions are 4.3 μrad, 5.1 μrad, and 10.2 μrad, respectively, when the excitation voltage is 250 VPP. The proposed motor holds the advantages of compact structure, adjustable preload, and high positioning accuracy, and presents a broad application prospect in the fields of robot joint technology, optical tracking system, and laser communication.
- 4 May 2023
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 32 (6) , 065010
A novel bonded-type 3-degree-of-freedom ultrasonic motor: design, simulation, and experimental investigation
Most of 3-degree-of-freedom (3-DOF) ultrasonic motors generally have the problems of low positioning accuracy, difficulty to apply preload, and excessive longitudinal dimension, leading to the limitation in industrial application. To address these issues, a novel bonded-type 3-DOF ultrasonic motor, consists of a convex cylindrical stator, a pre-tightening force structure, and a hemispherical rotor, is proposed in this study. A quadratically polarized toroidal piezoelectric ceramic is bonded to the upper surface of the stator. Three vibration modes of the stator are excited by applying different excitation signals on the piezoelectric ceramic. By coupling any two of the three vibration modes, the elliptical motion of the driving feet of the convex cylindrical stator around the x, y, and z axes are excited, respectively. A novel pre-tightening force application method is proposed to adjust the contact between the stator and rotor. Under the action of friction, the elliptical motion of the driving feet in three directions drives the rotor to rotate around three axes, respectively. The vibration modes of the stator are first simulated by using the finite element method. In addition, the optimal structural dimensions of the stator and the elliptical motion trajectories of the driving feet are calculated. Finally, a prototype of the proposed 3-DOF ultrasonic motor is fabricated and experimentally investigated. The experimental results show that the no-load rotary velocities of the motor prototype in the three rotation directions are 25 r min−1, 22 r min−1, and 380 r min−1, respectively, its start/stop response time are 4.1 ms/3.9 ms, 6.3 ms/7.5 ms, and 6.1 ms/7.9 ms, respectively, and its angular displacement resolutions are 4.3 μrad, 5.1 μrad, and 10.2 μrad, respectively, when the excitation voltage is 250 VPP. The proposed motor holds the advantages of compact structure, adjustable preload, and high positioning accuracy, and presents a broad application prospect in the fields of robot joint technology, optical tracking system, and laser communication.