Mirko Fornasier
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mirko Fornasier has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Carlo De Santi
University of Padova
7 shared publications - Enrico Zanoni
University of Padova
7 shared publications - Gaudenzio Meneghesso
University of Padova
7 shared publications - Matteo Meneghini
University of Padova
7 shared publications - Matteo Buffolo
University of Padova
4 shared publications - Zhan Gao
Łukasiewicz Research Network-Institute of Microelectronics and Photonics
4 shared publications
Latest Publications
- Open Access
- 27 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (3) , 369-372
Self-Induced Photoionization of Traps in Buffer-Free AlGaN/GaN HEMTs
Detrapping mechanisms and their dependence on applied bias have been studied in buffer-free AlGaN/GaN HEMTs on SiC. It is shown that the detrapping time constant decreases by orders of magnitude when the device is biased in semi-on conditions, or if the gate Schottky junction is forward biased with source and drain at ground. Despite completely different mechanisms are involved concerning charge transport and light emission, both bias conditions induce emission of high-energy photons (E>2 eV) which can photoionize traps, thus enhancing the recovery process. Data shown here suggest that a realistic description of GaN device behaviour can only be achieved by including optical effects in device modeling.
- 27 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (3) , 369-372
Open AccessSelf-Induced Photoionization of Traps in Buffer-Free AlGaN/GaN HEMTs
Detrapping mechanisms and their dependence on applied bias have been studied in buffer-free AlGaN/GaN HEMTs on SiC. It is shown that the detrapping time constant decreases by orders of magnitude when the device is biased in semi-on conditions, or if the gate Schottky junction is forward biased with source and drain at ground. Despite completely different mechanisms are involved concerning charge transport and light emission, both bias conditions induce emission of high-energy photons (E>2 eV) which can photoionize traps, thus enhancing the recovery process. Data shown here suggest that a realistic description of GaN device behaviour can only be achieved by including optical effects in device modeling.
- Open Access
- 31 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (12) , 6256-6261
Dynamic Behavior of Threshold Voltage and I D – V DS Kink in AlGaN/GaN HEMTs Due to Poole–Frenkel Effect
The kink effect in field-effect transistors (FETs) consists in a sudden increase in drain current, $\textit{I}_{\text{D}}$ , during a drain voltage sweep and leading to a higher $\textit{I}_{\text{D}}$ saturation value. We report new experimental data concerning the dynamic behavior of the “kink” in AlGaN/GaN HEMTs and correlate them with deep levels. The results demonstrate the role of the Poole–Frenkel effect in determining the occurrence of the kink and identify the experimental conditions that make it observable.
- 31 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (12) , 6256-6261
Open AccessDynamic Behavior of Threshold Voltage and I D – V DS Kink in AlGaN/GaN HEMTs Due to Poole–Frenkel Effect
The kink effect in field-effect transistors (FETs) consists in a sudden increase in drain current, $\textit{I}_{\text{D}}$ , during a drain voltage sweep and leading to a higher $\textit{I}_{\text{D}}$ saturation value. We report new experimental data concerning the dynamic behavior of the “kink” in AlGaN/GaN HEMTs and correlate them with deep levels. The results demonstrate the role of the Poole–Frenkel effect in determining the occurrence of the kink and identify the experimental conditions that make it observable.
- Top Cited PapersOpen Access
- 9 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (3) , 1396-1407
Microwave and Millimeter-Wave GaN HEMTs: Impact of Epitaxial Structure on Short-Channel Effects, Electron Trapping, and Reliability
Application of gallium nitride high-electron-mobility transistors (GaN HEMTs) to millimeter-wave power amplifiers requires gate length scaling below 150 nm: in order to control short-channel effects, the gate-to-channel distance must be decreased, and the device epitaxial structure has to be completely redesigned. A high 2-D electron gas (2DEG) carrier density can be preserved even with a very thin top barrier layer by substituting AlGaN with AlN, InAl(Ga)N, or ScAlN. Moreover, to prevent interaction of hot electrons with compensating impurities and defects in the doped GaN buffer, the latter has to be separated from the channel by a back barrier. Other device designs consist in adopting a graded channel (which controls the electric field) or to adopt nitrogen-polar (N-polar) GaN growth (which decreases the distance between gate and channel, thus attenuating short-channel effects). The aim of this article is to review the various options for controlling short-channel effects, improve off-state characteristics, and reduce drain–source leakage current. Advantages and potential drawbacks of each proposed solution are analyzed in terms of current collapse (CC), dispersion effects, and reliability.
- 9 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (3) , 1396-1407
Top Cited PapersOpen AccessMicrowave and Millimeter-Wave GaN HEMTs: Impact of Epitaxial Structure on Short-Channel Effects, Electron Trapping, and Reliability
Application of gallium nitride high-electron-mobility transistors (GaN HEMTs) to millimeter-wave power amplifiers requires gate length scaling below 150 nm: in order to control short-channel effects, the gate-to-channel distance must be decreased, and the device epitaxial structure has to be completely redesigned. A high 2-D electron gas (2DEG) carrier density can be preserved even with a very thin top barrier layer by substituting AlGaN with AlN, InAl(Ga)N, or ScAlN. Moreover, to prevent interaction of hot electrons with compensating impurities and defects in the doped GaN buffer, the latter has to be separated from the channel by a back barrier. Other device designs consist in adopting a graded channel (which controls the electric field) or to adopt nitrogen-polar (N-polar) GaN growth (which decreases the distance between gate and channel, thus attenuating short-channel effects). The aim of this article is to review the various options for controlling short-channel effects, improve off-state characteristics, and reduce drain–source leakage current. Advantages and potential drawbacks of each proposed solution are analyzed in terms of current collapse (CC), dispersion effects, and reliability.
- Open Access
- 7 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 59 (4) , 1-10
Understanding the Optical Degradation of 845 nm Micro-Transfer-Printed VCSILs for Photonic Integrated Circuits
For the first time we investigate the optical degradation of vertical-cavity silicon-integrated lasers VCSILs) designed for operation at 845 nm in photonic integrated circuits (PICs). The study is based on the combined electro-optical characterization of VCSIL, submitted to constant-current stress tests at different current levels. The original results obtained within the manuscript indicate that degradation is related to the diffusion of impurities. Remarkably, depending on the region through which these impurities are migrating, the diffusion process affects device characteristics in different ways. During Phase 1 (Ph1), compensating impurities originating from the metal-semiconductor contact cross the top DBR, thus degrading mirror reflectivity, which is rarely observed in the literature, and leading to an increase in the threshold current of the device. As the impurities start reaching the active region we observe the onset of Phase 2 (Ph2), during which both threshold current and sub-threshold slope worsen, due to the increase of the Shockley-Read-Hall recombination rate. This phase is also characterized by a measurable increase in series resistance, which is ascribed to a change in the resistance of the oxide aperture. The identification of the root cause of physical degradation represents a fundamental step for future lifetime improvement of these novel optical sources, which are set to replace conventional solid-state sources in the $0.85 \mu \text{m}$ communication window.
- 7 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 59 (4) , 1-10
Open AccessUnderstanding the Optical Degradation of 845 nm Micro-Transfer-Printed VCSILs for Photonic Integrated Circuits
For the first time we investigate the optical degradation of vertical-cavity silicon-integrated lasers VCSILs) designed for operation at 845 nm in photonic integrated circuits (PICs). The study is based on the combined electro-optical characterization of VCSIL, submitted to constant-current stress tests at different current levels. The original results obtained within the manuscript indicate that degradation is related to the diffusion of impurities. Remarkably, depending on the region through which these impurities are migrating, the diffusion process affects device characteristics in different ways. During Phase 1 (Ph1), compensating impurities originating from the metal-semiconductor contact cross the top DBR, thus degrading mirror reflectivity, which is rarely observed in the literature, and leading to an increase in the threshold current of the device. As the impurities start reaching the active region we observe the onset of Phase 2 (Ph2), during which both threshold current and sub-threshold slope worsen, due to the increase of the Shockley-Read-Hall recombination rate. This phase is also characterized by a measurable increase in series resistance, which is ascribed to a change in the resistance of the oxide aperture. The identification of the root cause of physical degradation represents a fundamental step for future lifetime improvement of these novel optical sources, which are set to replace conventional solid-state sources in the $0.85 \mu \text{m}$ communication window.
- Open Access
- 9 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (6) , 3005-3010
Transconductance Overshoot, a New Trap-Related Effect in AlGaN/GaN HEMTs
DC characteristics of AlGaN/GaN HEMTs with different thickness values of the undoped GaN channel layer were compared. An abnormal transconductance ( ${g}_{m}{)}$ overshoot accompanied by a negative threshold voltage ( ${V}_{\text {TH}}{)}$ shift was observed during ${I}_{\text {DS}}$ – ${V}_{\text {GS}}$ sweep in devices with thinner GaN layer. At the same time, a non-monotonic increase in gate current was observed. In OFF-state, electron trapping occurs in the undoped GaN layer or at the GaN/AlN interface, leading to a positive ${V}_{\text {TH}}$ shift. When the device is turning on at a sufficiently high ${V}_{\text {DS}}$ , electron de-trapping occurs due to trap impact-ionization; consequently, ${V}_{\text {TH}}$ and therefore ${I}_{\text {D}}$ suddenly recovers, leading to the ${g}_{m}$ overshoot effect. These effects are attributed to electron trap impact-ionization and consequent modulation of the device’s electric field.
- 9 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (6) , 3005-3010
Open AccessTransconductance Overshoot, a New Trap-Related Effect in AlGaN/GaN HEMTs
DC characteristics of AlGaN/GaN HEMTs with different thickness values of the undoped GaN channel layer were compared. An abnormal transconductance ( ${g}_{m}{)}$ overshoot accompanied by a negative threshold voltage ( ${V}_{\text {TH}}{)}$ shift was observed during ${I}_{\text {DS}}$ – ${V}_{\text {GS}}$ sweep in devices with thinner GaN layer. At the same time, a non-monotonic increase in gate current was observed. In OFF-state, electron trapping occurs in the undoped GaN layer or at the GaN/AlN interface, leading to a positive ${V}_{\text {TH}}$ shift. When the device is turning on at a sufficiently high ${V}_{\text {DS}}$ , electron de-trapping occurs due to trap impact-ionization; consequently, ${V}_{\text {TH}}$ and therefore ${I}_{\text {D}}$ suddenly recovers, leading to the ${g}_{m}$ overshoot effect. These effects are attributed to electron trap impact-ionization and consequent modulation of the device’s electric field.
- Open Access
- 15 March 2023
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12439, 18-128
Analysis of defect-related optical degradation of VCSILs for photonic integrated circuits
Laser diodes are of paramount importance for on-chip telecommunications applications, and a wide range of sensing devices that require near-infrared sources. In this work, the devices under test are vertical-cavity silicon-integrated lasers (VCSILs) designed for operation at 845 nm in photonic integrated circuits (PICs). We focus on the analysis of the degradation of the optical performance during aging. To investigate the reliability of the devices, we carried out several stress tests at constant current, ranging from 3.5 mA to 4.5 mA representing a highly accelerated stress condition. We observed two different degradation modes. In the first part of the experiments, the samples exhibited a worsening of the threshold current, but the sub-threshold emission was unaffected by degradation. We associated this behavior to the diffusion of impurities that, from the p-contact, were crossing the upper mirror implying a worsening of the DBR optical absorption. In the second stage of the stress test, the devices showed a higher degradation rate of the threshold current, whose variation was found to be linearly correlated to the worsening of the sub-threshold emission. We related this second degradation mode to the migration of the same impurities degrading the top DBR that, when reaching the active region of the laser, induced an increase in the non-radiative recombination rate. In addition to that, we related the two degradation modes to the change in series resistance, which was ascribed to the resistivity increment of the top DBR first and of oxide aperture afterwards.
- 15 March 2023
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12439, 18-128
Open AccessAnalysis of defect-related optical degradation of VCSILs for photonic integrated circuits
Laser diodes are of paramount importance for on-chip telecommunications applications, and a wide range of sensing devices that require near-infrared sources. In this work, the devices under test are vertical-cavity silicon-integrated lasers (VCSILs) designed for operation at 845 nm in photonic integrated circuits (PICs). We focus on the analysis of the degradation of the optical performance during aging. To investigate the reliability of the devices, we carried out several stress tests at constant current, ranging from 3.5 mA to 4.5 mA representing a highly accelerated stress condition. We observed two different degradation modes. In the first part of the experiments, the samples exhibited a worsening of the threshold current, but the sub-threshold emission was unaffected by degradation. We associated this behavior to the diffusion of impurities that, from the p-contact, were crossing the upper mirror implying a worsening of the DBR optical absorption. In the second stage of the stress test, the devices showed a higher degradation rate of the threshold current, whose variation was found to be linearly correlated to the worsening of the sub-threshold emission. We related this second degradation mode to the migration of the same impurities degrading the top DBR that, when reaching the active region of the laser, induced an increase in the non-radiative recombination rate. In addition to that, we related the two degradation modes to the change in series resistance, which was ascribed to the resistivity increment of the top DBR first and of oxide aperture afterwards.
- 1 January 2023
- Published by Optica Publishing Group
- p. SF2Q.8
Modeling of the Optical and Electrical Degradation of 845 nm VCSILs
Optical and electrical degradation of novel micro-transfer-printed VCSILs is investigated. Modeling of experimental data suggests that the main degradation mechanism is represented by the relocation of impurities, originating from the p-side, toward the active region.
- 1 January 2023
- Published by Optica Publishing Group
- p. SF2Q.8
Modeling of the Optical and Electrical Degradation of 845 nm VCSILs
Optical and electrical degradation of novel micro-transfer-printed VCSILs is investigated. Modeling of experimental data suggests that the main degradation mechanism is represented by the relocation of impurities, originating from the p-side, toward the active region.