Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Serkan Budak has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Hybrid LQR–SMC/STSMC with BB–BC Optimization for Enhanced Transient Performance and Chattering Suppression in a 3-DOF Hover System

    by Serkan Budak, Cemil Sungur, Akif Durdu

    This study presents a novel hierarchical hybrid control architecture for the attitude stabilization of a 3-Degree-of-Freedom (3-DOF) hover system. Operating on a linearized state-space model, a Linear Quadratic Regulator (LQR) is deployed as the optimal inner-loop core to guarantee baseline multi-variable stability. To dramatically improve transient performance and suppress high-frequency oscillations, Sliding Mode Control (SMC) and Super-Twisting Sliding Mode Control (STSMC) are incorporated not as conventional additive inputs, but as dynamic reference-reshaping supervisory mechanisms in the outer loop. This structural decoupling preserves the optimal characteristics of the LQR while effectively attenuating chattering, thereby preventing physical actuator fatigue. Furthermore, the Big Bang–Big Crunch (BB-BC) metaheuristic algorithm is employed to systematically optimize the design parameters of the supervisory layers, enabling effective steady-state error reduction with a remarkably low computational cost. Comparative evaluations demonstrate that the proposed LQR-STSMC framework significantly accelerates system responsiveness, reducing rise times by approximately 80% to 90% and consistently lowering settling times across all operational axes while achieving a reduction of up to two orders of magnitude in overall tracking errors (ITAE) relative to the baseline LQR. Although evaluations involving Model Predictive Control (MPC) demonstrate improvements in transient response and a reduction in total error compared to the standard LQR, the proposed LQR-STSMC architecture exhibits significantly better overall performance and superior disturbance rejection capabilities. Simulation results under continuous aerodynamic perturbations (wind disturbances) confirm that the proposed hierarchical methodology effectively eliminates steady-state offsets, fundamentally outperforming both classical LQR and MPC in terms of robustness, precision, and ultra-fast transient performance.

  • Open Access

    Disturbance-tolerant quadrotor control using a hybrid LQR and super-twisting sliding mode approach

    by Serkan Budak, Cemil Sungur, Akif Durdu

    This study proposes a robust cascaded hybrid control architecture combining the Linear Quadratic Regulator (LQR) with Super-Twisting Sliding Mode Control (STSMC) to address the attitude stabilization problem of underactuated quadrotor UAVs. In this framework, the inner LQR loop ensures optimal stabilization, while the outer STSMC loops provide robust reference modification to compensate for uncertainties. To maximize the robustness of the proposed hybrid architecture, the parameters of the STSMC component were globally optimized using the Big Bang-Big Crunch (BB-BC) algorithm. The effectiveness of the proposed strategy is rigorously evaluated on the Quanser 3-DOF Hover system model against two distinct benchmarks: the classical LQR and the optimization-based Model Predictive Control (MPC). Comprehensive simulation scenarios were conducted, including stochastic wind disturbances, time varying thrust coefficients, sudden payload release, and critical motor failure. Additionally, a virtual 3D spatial analysis based on kinematic reconstruction was performed to validate the positional stability of the rotor tips. The comparative results demonstrate that while the MPC controller exhibits a faster transient response compared to the classical LQR, it suffers from significant performance degradation under model mismatches. In contrast, the proposed LQR-STSMC consistently outperforms both benchmarks, achieving error metrics (ISE, IAE, and ITAE) orders of magnitude lower than the competitors. The findings confirm that the hybrid scheme offers superior fault tolerance, faster stabilization, and precise tracking capabilities, making it a highly reliable alternative for safety critical flight operations in uncertain environments.


  • Open Access

    Deep reinforcement learning-based control of a 1-DOF helicopter: a comparative analysis of classical and modern methods

    by Serkan Budak, Cemil Sungur, Akif Durdu

    This study presents a comparative analysis of different control methodologies on the linearized model of a single degree-of-freedom (1-DOF) helicopter system around its operating point. The control structures evaluated in this study include a Proportional-Integral-Derivative (PID) controller optimized via Particle Swarm Optimization (PSO), Model Predictive Control (MPC), and the Deep Deterministic Policy Gradient (DDPG) algorithm based on Deep Reinforcement Learning (DRL). The conducted simulations revealed that the DRL-based controller exhibited a superior performance compared to the other methods, even on the linearized model, both in terms of reducing the magnitude of the error and improving the system’s transient response performance. This approach demonstrates the capacity to produce a rapid response without compromising the system’s stability, concurrently achieving faster rise and settling times. Furthermore, by effectively suppressing the time-weighted error values, it provides an advantage in terms of both accuracy and control quality. These compelling results indicate the significant potential of learning-based control methods in the control of nonlinear systems, establishing DRL-based strategies as a reliable foundation for advanced control applications and a superior alternative to classical methods.


  • Quadrotor control using hybrid approaches: LQR-PID and LQR-FOPID methods

    by Serkan Budak, Cemil Sungur, Akif Durdu

    Inderscience is a global company, a dynamic leading independent journal publisher disseminates the latest research across the broad fields of science, engineering and technology; management, public and business administration; environment, ecological economics and sustainable development; computing, ICT and internet/web services, and related areas.

  • Open Access

    Investigation of Applicable Control Methods on Quadrotor Model

    by Serkan Budak, Cemil Sungur, Akif Durdu

    Unmanned Aerial Vehicles are subject to a range of disturbances during flight, including sensor noise, strong winds and turbulence, nonlinear pattern changes, and time delays. These effects can have a significant impact on the flight quality and control of Unmanned Aerial Vehicles. As a result, there has been a growing interest in researching Unmanned Aerial Vehicle control methods. Among the various types of Unmanned Aerial Vehicles, quadrotor Unmanned Aerial Vehicles have become an ideal choice for the generation and development of control algorithms, due to their nonlinearity and susceptibility to disturbances. In this study, a quadrotor model was developed and compared with linear and nonlinear control algorithms. Linear and nonlinear control designs were developed using the obtained model, and orientation control of the quadrotor was achieved. Among the linear control methods, Proportional Integral Derivative and Linear Quadratic Regulator were preferred, while Sliding Mode Control was preferred among the nonlinear control methods. The performance and step responses of the designed controllers were then observed.

  • Use of Yolo Algorithm for Traffic Sign Detection in Autonomous Vehicles and Improvement Using Data Replication Methods

    by Serkan Budak, Firat Bozkaya, Mustafa Yasin Akmaz, Şükrücan Tiğlioğlu, Cansel Boynukara, Okan Kazanci, Zülal Hilal Yildiz Budak, Akif Durdu, Cemil Sungur

    Autonomous vehicles use many technologies and methods to detect and act on surrounding objects. The most common among these technologies is an algorithm called YOLO (You Only Look Once). This algorithm quickly detects objects in an image and classifies these objects accurately. This study examines the use of the YOLO algorithm for signage detection in autonomous vehicles and how this algorithm can be improved. First of all, the basic principles and working mechanisms of the YOLO algorithm are explained. Then, it is explained in detail how this algorithm can be used for plate detection in autonomous vehicles. Various models were trained using the YOLO algorithm and the data set created with real data, and the trained models were tested on real-time systems. Finally, suggestions for the improvement of the YOLO algorithm are presented and how this algorithm can be improved further in the future is discussed.


  • Kalman Filter and PID Application on Underwater Vehicles

    by Serkan Budak, Muhammet Halis Teki̇n, Akif Durdu, Cemil Sungur

    Unmanned underwater vehicles (ROV/AUV) are autonomous or remotely controlled robotic systems that can move underwater at any desired angle. Unmanned underwater vehicles; It is used in areas such as underwater image taking, ship maintenance and repair, coast guard, examination of shipwrecks, underwater cleaning. In this study, the software design of the balance control of underwater vehicles was carried out using the PID algorithm. For the PID algorithm trial, a two-motor test setup with an IMU sensor was prepared. After the data from the sensor were recorded in MATLAB using the Kalman filter, the transfer function of the system was obtained using the System Identification Toolbox. With the obtained transfer function, the stable operation of the system is provided in real time. As a result of the research on software and hardware integration, microcontroller ARM-based STM32 was used.


  • Orientation Determination in IMU Sensor with Complementary Filter

    by Muhammed Nazmi Öz, Serkan Budak, Ender Kurnaz, Akif Durdu

    The use of unmanned aerial vehicles (UAV) systems has increased in recent years. Therefore,studies on UAVs have increased today. In this direction, the production of UAV systems with domestic resources has gained importance. In this study, it is desired to develop a domestic and national flight control card and software. In the flight control board designed for the UAV, it is aimed to keep the vehicle in balance in the air. Accurate measurement of platform orientation plays an important role in many applications such as aerospace, robotics, navigation, marine, machine interaction [1]. Inertial Measurement Unit (IMU) sensor was used to accurately measure the orientation of the UAV. IMU sensor is widely used in UAVs due to its light weight and low energy consumption. In this direction, the need for a filter has emerged in the IMU sensor, which is used to accurately measure the orientation of the unmanned aerial vehicle. In this study, a complementary filter was applied on the IMU sensor. Thanks to this filter, it has been observed that the accuracy of the data received from the IMU sensor has increased. Based on the data obtained, a Proportional Integral Derivative (PID) algorithm was developed, and the vehicle was kept in balance. In this study, ARMCortex-M4 based STM32F407VG microcontroller and MPU6050 as IMU sensor were used. Keil-uVision5 compiler is preferred for software. As a result, high accuracy in the orientation detection of unmanned aerial vehicles was obtained by applying a complementary filter on the IMU sensor.


  • Design of Adaptive Speed Control System with Model Predictive Control

    by Serkan Budak, Cemil Sungur, Hakan Terzıoğlu

    Model predictive control used in adaptive speed control systems can make inferences by predicting the future like a driver, taking precautions, imposing restrictions in terms of safety, comfort and fuel consumption just like the driver, and giving different degrees of importance to these restrictions. The importance of choosing appropriate parameter values used in model predictive control design was emphasized with graphics in the simulation study. When the appropriate parameter values are selected, speed and distance control gave the best results according to the results obtained.


  • COMPARATIVE FAULT LOCATION ESTIMATION BY USING IMAGE PROCESSING IN MIXED TRANSMISSION LINES

    by Serkan Budak, Bahadir Akbal

    Overhead lines are generally used for electrical energy transmission. Also, XLPE underground cable lines are generally used in the city center and the crowded areas to provide electrical safety, so high voltage underground cable lines are used together with overhead line in the transmission lines, and these lines are called as the mixed lines. The distance protection relays are used to determine the impedance based fault location according to the current and voltage magnitudes in the transmission lines. However, the fault location cannot be correctly detected in mixed transmission lines due to different characteristic impedance per unit length because the characteristic impedance of high voltage cable line is significantly different from overhead line. Thus, determinations of the fault section and location with the distance protection relays are difficult in the mixed transmission lines. In this study, 154 kV overhead transmission line and underground cable line are examined as the mixed transmission line for the distance protection relays. Phase to ground faults are created in the mixed transmission line. overhead line section and underground cable section are simulated by using PSCAD/ EMTDC ™. The short circuit fault images are generated in the distance protection relay for the overhead transmission line and underground cable transmission line faults. The images include the R-X impedance diagram of the fault, and the R-X impedance diagram have been detected by applying image processing steps. Artificial neural network (ANN) and the regression methods are used for prediction of the fault location, and the results of image processing are used as the input parameters for the training process of ANN and the regression methods. The results of ANN and regression methods are compared to select the most suitable method at the end of this study for forecasting of the fault location in transmission lines.