CSCemil Sungur

Cemil Sungur

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Cemil Sungur has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Hybrid LQR–SMC/STSMC with BB–BC Optimization for Enhanced Transient Performance and Chattering Suppression in a 3-DOF Hover System

    by Serkan Budak, Cemil Sungur, Akif Durdu

    This study presents a novel hierarchical hybrid control architecture for the attitude stabilization of a 3-Degree-of-Freedom (3-DOF) hover system. Operating on a linearized state-space model, a Linear Quadratic Regulator (LQR) is deployed as the optimal inner-loop core to guarantee baseline multi-variable stability. To dramatically improve transient performance and suppress high-frequency oscillations, Sliding Mode Control (SMC) and Super-Twisting Sliding Mode Control (STSMC) are incorporated not as conventional additive inputs, but as dynamic reference-reshaping supervisory mechanisms in the outer loop. This structural decoupling preserves the optimal characteristics of the LQR while effectively attenuating chattering, thereby preventing physical actuator fatigue. Furthermore, the Big Bang–Big Crunch (BB-BC) metaheuristic algorithm is employed to systematically optimize the design parameters of the supervisory layers, enabling effective steady-state error reduction with a remarkably low computational cost. Comparative evaluations demonstrate that the proposed LQR-STSMC framework significantly accelerates system responsiveness, reducing rise times by approximately 80% to 90% and consistently lowering settling times across all operational axes while achieving a reduction of up to two orders of magnitude in overall tracking errors (ITAE) relative to the baseline LQR. Although evaluations involving Model Predictive Control (MPC) demonstrate improvements in transient response and a reduction in total error compared to the standard LQR, the proposed LQR-STSMC architecture exhibits significantly better overall performance and superior disturbance rejection capabilities. Simulation results under continuous aerodynamic perturbations (wind disturbances) confirm that the proposed hierarchical methodology effectively eliminates steady-state offsets, fundamentally outperforming both classical LQR and MPC in terms of robustness, precision, and ultra-fast transient performance.

  • Open Access

    Disturbance-tolerant quadrotor control using a hybrid LQR and super-twisting sliding mode approach

    by Serkan Budak, Cemil Sungur, Akif Durdu

    This study proposes a robust cascaded hybrid control architecture combining the Linear Quadratic Regulator (LQR) with Super-Twisting Sliding Mode Control (STSMC) to address the attitude stabilization problem of underactuated quadrotor UAVs. In this framework, the inner LQR loop ensures optimal stabilization, while the outer STSMC loops provide robust reference modification to compensate for uncertainties. To maximize the robustness of the proposed hybrid architecture, the parameters of the STSMC component were globally optimized using the Big Bang-Big Crunch (BB-BC) algorithm. The effectiveness of the proposed strategy is rigorously evaluated on the Quanser 3-DOF Hover system model against two distinct benchmarks: the classical LQR and the optimization-based Model Predictive Control (MPC). Comprehensive simulation scenarios were conducted, including stochastic wind disturbances, time varying thrust coefficients, sudden payload release, and critical motor failure. Additionally, a virtual 3D spatial analysis based on kinematic reconstruction was performed to validate the positional stability of the rotor tips. The comparative results demonstrate that while the MPC controller exhibits a faster transient response compared to the classical LQR, it suffers from significant performance degradation under model mismatches. In contrast, the proposed LQR-STSMC consistently outperforms both benchmarks, achieving error metrics (ISE, IAE, and ITAE) orders of magnitude lower than the competitors. The findings confirm that the hybrid scheme offers superior fault tolerance, faster stabilization, and precise tracking capabilities, making it a highly reliable alternative for safety critical flight operations in uncertain environments.


  • Open Access

    Deep reinforcement learning-based control of a 1-DOF helicopter: a comparative analysis of classical and modern methods

    by Serkan Budak, Cemil Sungur, Akif Durdu

    This study presents a comparative analysis of different control methodologies on the linearized model of a single degree-of-freedom (1-DOF) helicopter system around its operating point. The control structures evaluated in this study include a Proportional-Integral-Derivative (PID) controller optimized via Particle Swarm Optimization (PSO), Model Predictive Control (MPC), and the Deep Deterministic Policy Gradient (DDPG) algorithm based on Deep Reinforcement Learning (DRL). The conducted simulations revealed that the DRL-based controller exhibited a superior performance compared to the other methods, even on the linearized model, both in terms of reducing the magnitude of the error and improving the system’s transient response performance. This approach demonstrates the capacity to produce a rapid response without compromising the system’s stability, concurrently achieving faster rise and settling times. Furthermore, by effectively suppressing the time-weighted error values, it provides an advantage in terms of both accuracy and control quality. These compelling results indicate the significant potential of learning-based control methods in the control of nonlinear systems, establishing DRL-based strategies as a reliable foundation for advanced control applications and a superior alternative to classical methods.


  • A Generalizable D-VIO and Its Fusion With GNSS/IMU for Improved Autonomous Vehicle Localization

    by Abdullah Yusefi, Akif Durdu, Fırat Bozkaya, Şükrücan Tığlıoğlu, Alper Yılmaz, Cemil Sungur

    An autonomous vehicle must be able to locate itself precisely and reliably in a large-scale outdoor area. In an attempt to enhance the localization of an autonomous vehicle based on Global Navigation Satellite System (GNSS)/Camera/Inertial Measurement Unit (IMU), when GNSS signals are interfered with or obstructed by reflected signals, a multi-step correction filter is used to smooth the inaccurate GNSS data obtained. The proposed solutions integrate a high amount of data from several sensors to compensate for the sensors' individual weaknesses. Additionally, this work proposes a Generalizable Deep Visual Intertial Odometry (GD-VIO) to better locate the vehicle in the event of GNSS outages. The algorithms suggested in this research have been tested through real-world experimentations, demonstrating that they are able to deliver accurate and trustworthy vehicle pose estimation.


  • Development of a Test System to Make Circularity Measurements of Rubber Bushing After Stress Relief br

    by Muhammed Abdullah Özel, Selim Sefa Baysal, Cemil Sungur

    Rubber metal bushings are one of the most important parts of the suspension system. These parts are specially designed to minimize the vibrations and noises that vehicles are exposed to while driving. In this study, it is aimed to measure the circularity of rubber metal bushings after stress relief. A modular design is provided according to the tolerance values of the bushings in the inventory. Simultaneously with deep learning and image processing algorithms, laser circularity measurements are verified with reference to bush circularity and deformation points are determined. The detected deformation is transferred to the HMI screen. With this study, it was ensured that the circularity errors in the rubber metal bushings were taken under control and the problems that may be encountered after the production were eliminated, a more sensitive solution was provided, and a quality production and accurate results were obtained


  • Kalman Filter and PID Application on Underwater Vehicles

    by Serkan Budak, Muhammet Halis Teki̇n, Akif Durdu, Cemil Sungur

    Unmanned underwater vehicles (ROV/AUV) are autonomous or remotely controlled robotic systems that can move underwater at any desired angle. Unmanned underwater vehicles; It is used in areas such as underwater image taking, ship maintenance and repair, coast guard, examination of shipwrecks, underwater cleaning. In this study, the software design of the balance control of underwater vehicles was carried out using the PID algorithm. For the PID algorithm trial, a two-motor test setup with an IMU sensor was prepared. After the data from the sensor were recorded in MATLAB using the Kalman filter, the transfer function of the system was obtained using the System Identification Toolbox. With the obtained transfer function, the stable operation of the system is provided in real time. As a result of the research on software and hardware integration, microcontroller ARM-based STM32 was used.


  • Open Access

    Application of the Maturity Model in Industrial Corporations

    by Cihan Ünal, Cemil Sungur, Hakan Yildirim

    Enterprises need to evaluate for themselves whether they are ready for Industry 4.0 to survive and develop in the era of the Fourth Industrial Revolution. Therefore, it is necessary to conceptualize or develop an Industry 4.0 readiness and maturity model with basic model dimensions. The present study aimed to review the maturity models available in the literature and to develop and implement a comprehensive maturity model that would eliminate the problems in the existing models. Most maturity models developed lack vital dimensions such as laws, incentives, and corporate culture. While developing the model, AHP and expert opinions were used to determine the dimension weights. The model was applied to 87 businesses in various industries at the Ankara Chamber of Industry Industrial Park in Turkey. The developed model calculates the maturity level of the enterprise for six dimensions. The data on 61 corporations where Industry 4.0 technologies were adopted were analyzed based on demographic variables such as the year of establishment, industry, size, capital, and turnover. These findings demonstrated that Industry 4.0 was introduced recently in Turkey and businesses are required to take further steps to keep up with the global digital transformation. Since the number of industries and corporations that are aware of the Industry 4.0 technologies is limited in Ankara, Turkey, only a few businesses adopted the Industry 4.0 technologies. This developed model will make an important contribution to the literature with its unique dimensions. It would pave the way for further research in various industries in Turkey and other nations where Industry 4.0 investments are new.