Ümit Yurt
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ümit Yurt has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Barış KIR
Düzce University
1 shared publication - Behcet Dündar
Osmaniye Korkut Ata Üniversitesi
1 shared publication Behçet Dündar
Osmaniye Korkut Ata University
1 shared publication- Emriye Çinar Resuloğullari
Osmaniye Korkut Ata Üniversitesi
1 shared publication Gizem Dokuzlar
Osmaniye Korkut Ata University
1 shared publicationHalil Yilmaz
BOLU ABANT İZZET BAYSAL ÜNİVERSİTES
1 shared publication
Latest Publications
- Open Access
- 29 December 2023
- Published by Duzce Universitesi Bilim ve Teknoloji Dergisi in Düzce Üniversitesi Bilim ve Teknoloji Dergisi
- Vol. 11 (5) , 2283-2292
Correlation of Destructive and Non-Destructive Tests with Electrical Resistance in Cementless Composites
In the construction industry, tests such as compressive strength, density porosity, and water absorption porosity are frequently used to determine material properties. In general, experimental studies are divided into two categories: destructive and non-destructive testing methods. According to the common consensus, destructive testing methods produce more dependable results than non-destructive testing methods. However, it is not possible to reuse the samples in destructive tests, and there are difficulties in taking samples from the building whose construction process has been completed. In addition, the experimental implementation of destructive tests creates time and cost disadvantages. Within the scope of this study, destructive and non-destructive experiments have been carried out on alkali-activated concrete composites, which have attracted interest as sustainable environmentally friendly composite building materials in recent years. Compressive strength, density, porosity, water absorption, etc. traditional test methods have been associated with electrical resistance measurements. Electrical measurements have been taken with the MEGGER equipment, and resistance values have been directly correlated with the other parameters. The positive results indicate that different structures of materials used in the construction industry can be evaluated regardless of sample size or localization.
- 29 December 2023
- Published by Duzce Universitesi Bilim ve Teknoloji Dergisi in Düzce Üniversitesi Bilim ve Teknoloji Dergisi
- Vol. 11 (5) , 2283-2292
Open AccessCorrelation of Destructive and Non-Destructive Tests with Electrical Resistance in Cementless Composites
In the construction industry, tests such as compressive strength, density porosity, and water absorption porosity are frequently used to determine material properties. In general, experimental studies are divided into two categories: destructive and non-destructive testing methods. According to the common consensus, destructive testing methods produce more dependable results than non-destructive testing methods. However, it is not possible to reuse the samples in destructive tests, and there are difficulties in taking samples from the building whose construction process has been completed. In addition, the experimental implementation of destructive tests creates time and cost disadvantages. Within the scope of this study, destructive and non-destructive experiments have been carried out on alkali-activated concrete composites, which have attracted interest as sustainable environmentally friendly composite building materials in recent years. Compressive strength, density, porosity, water absorption, etc. traditional test methods have been associated with electrical resistance measurements. Electrical measurements have been taken with the MEGGER equipment, and resistance values have been directly correlated with the other parameters. The positive results indicate that different structures of materials used in the construction industry can be evaluated regardless of sample size or localization.
- 21 August 2023
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 238 (4) , 1851-1859
Effect of recycled asphalt waste on mechanical properties of alkali-activated mortars
In the next century, negative effects, such as an increase in temperature level, rise in sea level and decrease in forests and agricultural areas, are expected as a result of the harmful effects of global warming. The construction industry is among the main actors of global warming. Cement, the most used building material of the construction industry, is responsible for approximately 8% of CO 2 emissions worldwide. Reducing the amount of cement production and using alternative materials and wastes can contribute to reducing CO 2 emissions in the production of building materials. In this study, Alkali-Activated Mortar (AAM) mixtures which contain Ground Granulated Blast Furnace Slag (GGBFS) and Fly Ash (FA) were prepared. Recycled Asphalt Waste (RAW) is reduced to 0–4 mm size in order to use as fine aggregate in AAM mixes. Three different activation temperatures (40 °C, 80 °C and 120 °C) were applied for 18 h in order to examine the effect of activation temperature on the prepared AAM samples. After the application of activation temperature, the samples were kept in the standard curing pool for 7 and 28 days. After curing, physical and mechanical experiments were carried out on AAM samples. Water absorption and porosity, compressive strength and electrical resistivity tests were performed on the hardened samples. In addition, the acid effect on the samples was investigated comparatively with the changes in mechanical and physical properties. As a result, the study, in which high-strength mortar mixtures were obtained, shows promising results in terms of sustainable environmentalism. The compressive strength value of 45.74 MPa was found in the mortar mixtures produced using RAW. In addition, it was concluded that the optimum activation temperature is an important parameter of compressive strength and acid resistance.
- 21 August 2023
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 238 (4) , 1851-1859
Effect of recycled asphalt waste on mechanical properties of alkali-activated mortars
In the next century, negative effects, such as an increase in temperature level, rise in sea level and decrease in forests and agricultural areas, are expected as a result of the harmful effects of global warming. The construction industry is among the main actors of global warming. Cement, the most used building material of the construction industry, is responsible for approximately 8% of CO 2 emissions worldwide. Reducing the amount of cement production and using alternative materials and wastes can contribute to reducing CO 2 emissions in the production of building materials. In this study, Alkali-Activated Mortar (AAM) mixtures which contain Ground Granulated Blast Furnace Slag (GGBFS) and Fly Ash (FA) were prepared. Recycled Asphalt Waste (RAW) is reduced to 0–4 mm size in order to use as fine aggregate in AAM mixes. Three different activation temperatures (40 °C, 80 °C and 120 °C) were applied for 18 h in order to examine the effect of activation temperature on the prepared AAM samples. After the application of activation temperature, the samples were kept in the standard curing pool for 7 and 28 days. After curing, physical and mechanical experiments were carried out on AAM samples. Water absorption and porosity, compressive strength and electrical resistivity tests were performed on the hardened samples. In addition, the acid effect on the samples was investigated comparatively with the changes in mechanical and physical properties. As a result, the study, in which high-strength mortar mixtures were obtained, shows promising results in terms of sustainable environmentalism. The compressive strength value of 45.74 MPa was found in the mortar mixtures produced using RAW. In addition, it was concluded that the optimum activation temperature is an important parameter of compressive strength and acid resistance.
- Open Access
- 12 December 2022
- Published by Osmaniye Korkut Ata Universitesi in Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 5 (3) , 1720-1732
Gazi University Campus Information System Design and Integration with GIS
Üniversiteler bilginin üretilmesinde, paylaşılmasında ve yayılmasında önemli rol üstlenmektedirler. Farklı disiplinlerin bir arada bulunduğu bu kurumlar, eğitim-öğretim faaliyetlerinin yanı sıra, araştırma- geliştirme, yönetim, barınma, bakım onarım vb. birimleri yapısında bulunduran sosyal ve kültürel merkezlerdir. Tüm faaliyetlerin sürdürülebilir olması düzenli bir sistem alt yapısına ihtiyaç duymaktadır. Bu çalışma Coğrafi Bilgi sistemleri (CBS) alt yapısı kullanılarak hâlihazırda bulunan mekânsal bilgilerin, ulaşılabilir ve sorgulanabilir olması için gerekli sözel, sayısal, grafik vb. verilerin toplanarak sistem alt yapısında birleştirilmesinden oluşmaktadır. Gazi Üniversitesi Beşevler kampüsü üzerinde gerçekleştirilen bu çalışmada kampüs alanı içine poligon ağı kurularak her bir nokta (binalar, ağaçlar, yollar, sosyal donatılar vb.) koordinatlı olarak ölçülmüştür. Ölçüm işlemleri sonrasında oluşturulan sayısal haritalar ve araştırma alanından toplanan tüm veriler tematik haritalarla ilişkilendirilerek CBS sistem alt yapısı oluşturulmuştur. Sonuç olarak Üniversitenin geleceğe yönelik yapacağı düzenlemelerde, bilgi ve belgelerin sorgulanmasına, mevcut bilgilere tek noktadan ulaşılmasına, istenilen sorgulama ve analizlerin yapılmasına imkan verecek bir CBS tabanlı kampüs bilgi sistemi alt yapı oluşturulması amaçlanmıştır.
- 12 December 2022
- Published by Osmaniye Korkut Ata Universitesi in Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 5 (3) , 1720-1732
Open AccessGazi University Campus Information System Design and Integration with GIS
Üniversiteler bilginin üretilmesinde, paylaşılmasında ve yayılmasında önemli rol üstlenmektedirler. Farklı disiplinlerin bir arada bulunduğu bu kurumlar, eğitim-öğretim faaliyetlerinin yanı sıra, araştırma- geliştirme, yönetim, barınma, bakım onarım vb. birimleri yapısında bulunduran sosyal ve kültürel merkezlerdir. Tüm faaliyetlerin sürdürülebilir olması düzenli bir sistem alt yapısına ihtiyaç duymaktadır. Bu çalışma Coğrafi Bilgi sistemleri (CBS) alt yapısı kullanılarak hâlihazırda bulunan mekânsal bilgilerin, ulaşılabilir ve sorgulanabilir olması için gerekli sözel, sayısal, grafik vb. verilerin toplanarak sistem alt yapısında birleştirilmesinden oluşmaktadır. Gazi Üniversitesi Beşevler kampüsü üzerinde gerçekleştirilen bu çalışmada kampüs alanı içine poligon ağı kurularak her bir nokta (binalar, ağaçlar, yollar, sosyal donatılar vb.) koordinatlı olarak ölçülmüştür. Ölçüm işlemleri sonrasında oluşturulan sayısal haritalar ve araştırma alanından toplanan tüm veriler tematik haritalarla ilişkilendirilerek CBS sistem alt yapısı oluşturulmuştur. Sonuç olarak Üniversitenin geleceğe yönelik yapacağı düzenlemelerde, bilgi ve belgelerin sorgulanmasına, mevcut bilgilere tek noktadan ulaşılmasına, istenilen sorgulama ve analizlerin yapılmasına imkan verecek bir CBS tabanlı kampüs bilgi sistemi alt yapı oluşturulması amaçlanmıştır.
- Open Access
- 8 March 2022
- Published by Osmaniye Korkut Ata Universitesi in Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 5 (1) , 176-188
Kür Sıcaklığının Alkali Aktivasyonlu Lifli Betonunun Kırılma Özelliklerine Etkisi
Bu çalışma kapsamında, farklı sıcaklık aktivasyonunda (30°C, 60°C, 90°C ) dayanım kazanan alkali aktivasyonlu lifli betonların (AALB) kırılma özellikleri incelenmiştir. Bu amaçla 50x100x480 mm boyutlarında 10 mm çentik uzunluğuna sahip kiriş örnekler üretilmiştir. Eğilme etkisindeki kiriş örnekler üzerinden elde edilen Yük-CMOD grafiği altında kalan alanlar hesaplanarak kırılma enerjisi değerleri elde edilmiştir. Hesaplanan değerler üzerinden kırılma enerjisine sıcaklık kürünün etkisi basınç ve eğilme dayanımı değerleri ile karşılaştırmalı olarak incelenmiştir. Sonuç olarak aktivasyon sıcaklığının artışı ile kırılma enerjisi değerlerinde önemli bir artış olduğu görülmüştür. Yüksek dayanımlı AALB’ler üzerinde gerçekleştirilen deneyler sonucunda en yüksek kırılma enerjisi değerine 90 °C sıcaklık kürü uygulanan örnekler ulaşmıştır. En yüksek basınç ve eğilme dayanımı sırasıyla 82 MPa ve 3,78 MPa olarak elde edilmiştir.
- 8 March 2022
- Published by Osmaniye Korkut Ata Universitesi in Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 5 (1) , 176-188
Open AccessKür Sıcaklığının Alkali Aktivasyonlu Lifli Betonunun Kırılma Özelliklerine Etkisi
Bu çalışma kapsamında, farklı sıcaklık aktivasyonunda (30°C, 60°C, 90°C ) dayanım kazanan alkali aktivasyonlu lifli betonların (AALB) kırılma özellikleri incelenmiştir. Bu amaçla 50x100x480 mm boyutlarında 10 mm çentik uzunluğuna sahip kiriş örnekler üretilmiştir. Eğilme etkisindeki kiriş örnekler üzerinden elde edilen Yük-CMOD grafiği altında kalan alanlar hesaplanarak kırılma enerjisi değerleri elde edilmiştir. Hesaplanan değerler üzerinden kırılma enerjisine sıcaklık kürünün etkisi basınç ve eğilme dayanımı değerleri ile karşılaştırmalı olarak incelenmiştir. Sonuç olarak aktivasyon sıcaklığının artışı ile kırılma enerjisi değerlerinde önemli bir artış olduğu görülmüştür. Yüksek dayanımlı AALB’ler üzerinde gerçekleştirilen deneyler sonucunda en yüksek kırılma enerjisi değerine 90 °C sıcaklık kürü uygulanan örnekler ulaşmıştır. En yüksek basınç ve eğilme dayanımı sırasıyla 82 MPa ve 3,78 MPa olarak elde edilmiştir.
- 30 April 2020
- Published by Duzce Universitesi Bilim ve Teknoloji Dergisi in Düzce Üniversitesi Bilim ve Teknoloji Dergisi
- Vol. 8 (2) , 1548-1561
Investigation of Sulfuric Acid Effect in Geopolymer Concrete
En tr High amounts of energy are used for cement production, which is one of the important materials of the construction sector. Research is carried out to reduce the harmful effects of cement production. For the cementitious composites which have a lot of usage in the construction sector, alternative solutions which may be an alternative may be preferred. Building materials to be produced without the use of cement will reduce the amount of cement production and reduce the harmful effects of global warming. The environmental products to be produced instead of cementitious composites are expected to replace the currently used building materials in terms of strength and durability properties. In this study, high strength (65-85 MPa) geopolymer concretes were produced by using Blast Furnace Slag (BFS), sodium hydroxide (NaOH), sodium silicate (Na2SiO3), aggregate, hyper plasticizer and water. Hardened concrete specimens were subjected to acid effect in 0.5M, 1M and 1.5M Sulfuric Acid (SA) solution for 1, 7, 14, 21 and 28 days to determine their durability to acid attacks. Weight loss, water absorption and porosity values of geopolymer concrete specimen on days 1, 7, 14, 21 and 28 were determined. As a result, increasing acid exposure times increased water absorption, porosity, and weight loss rates. Similar to the relationship between water absorption and weight loss, a statistically linear relationship was found between water absorption and porosity. İnşaat sektörünün önemli malzemelerinden biri olan çimento üretimi için yüksek miktarlarda enerji harcanmaktadır. Çimento üretiminin zararlı etkilerini azaltmaya yönelik araştırmalar yapılmaktadır. İnşaat sektöründe çok fazla kullanım alanı olan çimentolu kompozitler için alternatif olabilecek çevreci çözümler tercih edilebilir. Çimento kullanılmadan üretilecek yapı malzemeleri çimento üretim miktarını azaltarak küresel ısınmanın zararlı etkilerini azaltacaktır. Üretilecek çevreci ürünlerin dayanım ve durabilite özellikleri açısından hâlihazırda kullanılan yapı malzemelerinin yerine geçebilecek nitelikte olması beklenmektedir. Bu çalışmada demir çelik fabrikalarının bir atığı olan Öğütülmüş Yüksek Fırın Cürufu (ÖYFC), Sodyum Hidroksit (NaOH), Sodyum Silikat (Na2SiO3), agrega, hiperakışkanlaştırıcı ve su kullanılarak yüksek dayanımlı (65-85 MPa) jeopolimer betonlar üretilmiştir. Sertleşmiş jeopolimer numuneler, asit saldırılarına karşı dayanıklılık özelliklerini belirlemek amacıyla 0,5M, 1M ve 1,5 M’lık Sülfürik Asit (SA) çözeltisi içerisinde 1, 7, 14, 21 ve 28 gün süresince asit etkisine maruz bırakılmıştır. Jeopolimer numunelerin ağırlık kayıpları, su emme ve porozite değerleri belirlenmiştir. Sonuç olarak numunelerin asitte kalma süreleri arttıkça su emme, porozite ve ağırlık kayıp oranlarında artış gözlemlenmiştir. Su emme -ağırlık kaybı arasındaki ilişkiye benzer şekilde su emme –porozite arasında da istatiksel olarak doğrusal bir ilişki olduğu görülmüştür.
- 30 April 2020
- Published by Duzce Universitesi Bilim ve Teknoloji Dergisi in Düzce Üniversitesi Bilim ve Teknoloji Dergisi
- Vol. 8 (2) , 1548-1561
Investigation of Sulfuric Acid Effect in Geopolymer Concrete
En tr High amounts of energy are used for cement production, which is one of the important materials of the construction sector. Research is carried out to reduce the harmful effects of cement production. For the cementitious composites which have a lot of usage in the construction sector, alternative solutions which may be an alternative may be preferred. Building materials to be produced without the use of cement will reduce the amount of cement production and reduce the harmful effects of global warming. The environmental products to be produced instead of cementitious composites are expected to replace the currently used building materials in terms of strength and durability properties. In this study, high strength (65-85 MPa) geopolymer concretes were produced by using Blast Furnace Slag (BFS), sodium hydroxide (NaOH), sodium silicate (Na2SiO3), aggregate, hyper plasticizer and water. Hardened concrete specimens were subjected to acid effect in 0.5M, 1M and 1.5M Sulfuric Acid (SA) solution for 1, 7, 14, 21 and 28 days to determine their durability to acid attacks. Weight loss, water absorption and porosity values of geopolymer concrete specimen on days 1, 7, 14, 21 and 28 were determined. As a result, increasing acid exposure times increased water absorption, porosity, and weight loss rates. Similar to the relationship between water absorption and weight loss, a statistically linear relationship was found between water absorption and porosity. İnşaat sektörünün önemli malzemelerinden biri olan çimento üretimi için yüksek miktarlarda enerji harcanmaktadır. Çimento üretiminin zararlı etkilerini azaltmaya yönelik araştırmalar yapılmaktadır. İnşaat sektöründe çok fazla kullanım alanı olan çimentolu kompozitler için alternatif olabilecek çevreci çözümler tercih edilebilir. Çimento kullanılmadan üretilecek yapı malzemeleri çimento üretim miktarını azaltarak küresel ısınmanın zararlı etkilerini azaltacaktır. Üretilecek çevreci ürünlerin dayanım ve durabilite özellikleri açısından hâlihazırda kullanılan yapı malzemelerinin yerine geçebilecek nitelikte olması beklenmektedir. Bu çalışmada demir çelik fabrikalarının bir atığı olan Öğütülmüş Yüksek Fırın Cürufu (ÖYFC), Sodyum Hidroksit (NaOH), Sodyum Silikat (Na2SiO3), agrega, hiperakışkanlaştırıcı ve su kullanılarak yüksek dayanımlı (65-85 MPa) jeopolimer betonlar üretilmiştir. Sertleşmiş jeopolimer numuneler, asit saldırılarına karşı dayanıklılık özelliklerini belirlemek amacıyla 0,5M, 1M ve 1,5 M’lık Sülfürik Asit (SA) çözeltisi içerisinde 1, 7, 14, 21 ve 28 gün süresince asit etkisine maruz bırakılmıştır. Jeopolimer numunelerin ağırlık kayıpları, su emme ve porozite değerleri belirlenmiştir. Sonuç olarak numunelerin asitte kalma süreleri arttıkça su emme, porozite ve ağırlık kayıp oranlarında artış gözlemlenmiştir. Su emme -ağırlık kaybı arasındaki ilişkiye benzer şekilde su emme –porozite arasında da istatiksel olarak doğrusal bir ilişki olduğu görülmüştür.