Anxin Ding
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Anxin Ding has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
Jihui Wang
School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, China
3 shared publicationsJianhui Wei
Wuhan Second Ship Design and Research Institute, Wuhan, China
2 shared publicationsJincheng Gao
Wuhan Second Ship Design and Research Institute, Wuhan, China
2 shared publications- Mi Xu
School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
2 shared publications - Qi Luo
Luoyang Ship Material Research Institute, Luoyang 471023, China
2 shared publications Xu Li
Wuhan Second Ship Design and Research Institute, Wuhan, China
2 shared publications
Latest Publications
- Open Access
Multiscale Prediction of Equivalent Elastic Properties of Carbon/Glass Hybrid Composite Laminates
A multi-scale framework is proposed for predicting the equivalent engineering elastic constants of carbon/glass hybrid composite laminates with different fiber volume fractions Vf by integrating multiscale finite element homogenization with analytical micromechanics. Biaxial carbon fiber fabric reinforced vinyl ester composites are used as the target material system, and representative volume element (RVE) models are constructed sequentially at the lamina, laminate, and hybrid-laminate scales. At the lamina scale, the analytical self-consistent field micromechanics (SCFM) approach and the RVE method give highly consistent predictions for the fiber-dominated longitudinal modulus E1 and in-plane shear modulus G12, with deviations below 2%. However, the SCFM approach overestimates the transverse modulus E2 and transverse Poisson’s ratio ν23 as the Vf rises. The unidirectional lamina constants predicted by SCFM and RVE are then used as inputs for an analytical solution for predicting elastic constants (ASPE) and a finite-element-analysis-based micromechanics (FEAM) model of laminate and hybrid-laminate. At the laminate scale, the moduli predicted by ASPE(SCFM) and ASPE(RVE) differ by less than 2%, whereas the out-of-plane properties are sensitive to the transverse lamina inputs. Experimental validation shows that the Ex values predicted by ASPE(RVE) and FEAM(RVE) deviate from the measured average by approximately 3.5%, with good agreement also obtained for Gxy and νxy. At the hybrid-laminate scale, ASPE(RVE) and FEAM(RVE) exhibit only minor differences in estimating the in-plane moduli, out-of-plane moduli, and Poisson’s ratios.
Open AccessMultiscale Prediction of Equivalent Elastic Properties of Carbon/Glass Hybrid Composite Laminates
A multi-scale framework is proposed for predicting the equivalent engineering elastic constants of carbon/glass hybrid composite laminates with different fiber volume fractions Vf by integrating multiscale finite element homogenization with analytical micromechanics. Biaxial carbon fiber fabric reinforced vinyl ester composites are used as the target material system, and representative volume element (RVE) models are constructed sequentially at the lamina, laminate, and hybrid-laminate scales. At the lamina scale, the analytical self-consistent field micromechanics (SCFM) approach and the RVE method give highly consistent predictions for the fiber-dominated longitudinal modulus E1 and in-plane shear modulus G12, with deviations below 2%. However, the SCFM approach overestimates the transverse modulus E2 and transverse Poisson’s ratio ν23 as the Vf rises. The unidirectional lamina constants predicted by SCFM and RVE are then used as inputs for an analytical solution for predicting elastic constants (ASPE) and a finite-element-analysis-based micromechanics (FEAM) model of laminate and hybrid-laminate. At the laminate scale, the moduli predicted by ASPE(SCFM) and ASPE(RVE) differ by less than 2%, whereas the out-of-plane properties are sensitive to the transverse lamina inputs. Experimental validation shows that the Ex values predicted by ASPE(RVE) and FEAM(RVE) deviate from the measured average by approximately 3.5%, with good agreement also obtained for Gxy and νxy. At the hybrid-laminate scale, ASPE(RVE) and FEAM(RVE) exhibit only minor differences in estimating the in-plane moduli, out-of-plane moduli, and Poisson’s ratios.
- Open Access
A New Curing-Dependent Viscoelastic Constitutive Model and Stress-Increment Equations for Numerical Simulation Predicting the Cure-Induced Stress of Epoxy Resin
A cure-dependent viscoelastic constitutive model is developed to describe the stress response of epoxy resin during curing. The progressive formation of the load-carrying network is represented phenomenologically through cure-dependent equilibrium and Maxwell-branch stiffness functions. A one-dimensional history-integral equation is derived and extended to non-isothermal conditions by incorporating temperature-dependent stiffness and reduced-time effects. Explicit stress-increment equations are then obtained for one-dimensional and three-dimensional isotropic materials and implemented in ABAQUS through a UMAT. Two idealized numerical cases are used to verify the consistency between the UMAT results and direct constitutive calculations. An illustrative encapsulation model further shows that different assumptions regarding the curing-dependent stiffness factor produce substantial differences in peak and final stresses. An additional cooling-rate sensitivity analysis shows that increasing the cooling rate increases the magnitude of the final compressive stress because less time is available for viscoelastic relaxation. A formal tensorial extension is also provided for anisotropic thermosetting materials, although it is not numerically assessed. The present results constitute constitutive and numerical verification rather than material-specific experimental validation.
Open AccessA New Curing-Dependent Viscoelastic Constitutive Model and Stress-Increment Equations for Numerical Simulation Predicting the Cure-Induced Stress of Epoxy Resin
A cure-dependent viscoelastic constitutive model is developed to describe the stress response of epoxy resin during curing. The progressive formation of the load-carrying network is represented phenomenologically through cure-dependent equilibrium and Maxwell-branch stiffness functions. A one-dimensional history-integral equation is derived and extended to non-isothermal conditions by incorporating temperature-dependent stiffness and reduced-time effects. Explicit stress-increment equations are then obtained for one-dimensional and three-dimensional isotropic materials and implemented in ABAQUS through a UMAT. Two idealized numerical cases are used to verify the consistency between the UMAT results and direct constitutive calculations. An illustrative encapsulation model further shows that different assumptions regarding the curing-dependent stiffness factor produce substantial differences in peak and final stresses. An additional cooling-rate sensitivity analysis shows that increasing the cooling rate increases the magnitude of the final compressive stress because less time is available for viscoelastic relaxation. A formal tensorial extension is also provided for anisotropic thermosetting materials, although it is not numerically assessed. The present results constitute constitutive and numerical verification rather than material-specific experimental validation.
- Open Access
Characterization of Potting Epoxy Resins Performance Parameters Based on a Viscoelastic Constitutive Model
To describe the evolution of residual stresses in epoxy resin during the curing process, a more detailed characterization of its viscoelastic properties is necessary. In this study, we have devised a simplified apparatus for assessing the viscoelastic properties of epoxy resin. This apparatus employs a confining cylinder to restrict the circumferential and radial deformations of the material. Following the application of load by the testing machine, the epoxy resin sample gradually reduces the gap between its surface and the inner wall of the confining cylinder, ultimately achieving full contact and establishing a continuous interface. By recording the circumferential stress–strain on the outer surface of the confining cylinder, we can deduce the variations in material bulk and shear moduli with time. This characterization spans eight temperature points surrounding the glass transition temperature, revealing the bulk and shear relaxation moduli of the epoxy resin. Throughout the experiments, the epoxy resin’s viscoelastic response demonstrated a pronounced time-temperature dependency. Below the glass transition temperature, the stress relaxation response progressively accelerated with increasing temperature, while beyond the glass transition temperature, the stress relaxation time underwent a substantial reduction. By applying the time-temperature superposition principle, it is possible to construct the relaxation master curves for the bulk and shear moduli of the epoxy resin. By fitting the data, we can obtain expressions for the constitutive model describing the viscoelastic behavior of the epoxy resin. In order to validate the reliability of the test results, a uniaxial tensile relaxation test was conducted on the epoxy resin casting body. The results show good agreement between the obtained uniaxial relaxation modulus curves and those derived from the bulk and shear relaxation modulus equations, confirming the validity of both the device design and the testing methodology.
Open AccessCharacterization of Potting Epoxy Resins Performance Parameters Based on a Viscoelastic Constitutive Model
To describe the evolution of residual stresses in epoxy resin during the curing process, a more detailed characterization of its viscoelastic properties is necessary. In this study, we have devised a simplified apparatus for assessing the viscoelastic properties of epoxy resin. This apparatus employs a confining cylinder to restrict the circumferential and radial deformations of the material. Following the application of load by the testing machine, the epoxy resin sample gradually reduces the gap between its surface and the inner wall of the confining cylinder, ultimately achieving full contact and establishing a continuous interface. By recording the circumferential stress–strain on the outer surface of the confining cylinder, we can deduce the variations in material bulk and shear moduli with time. This characterization spans eight temperature points surrounding the glass transition temperature, revealing the bulk and shear relaxation moduli of the epoxy resin. Throughout the experiments, the epoxy resin’s viscoelastic response demonstrated a pronounced time-temperature dependency. Below the glass transition temperature, the stress relaxation response progressively accelerated with increasing temperature, while beyond the glass transition temperature, the stress relaxation time underwent a substantial reduction. By applying the time-temperature superposition principle, it is possible to construct the relaxation master curves for the bulk and shear moduli of the epoxy resin. By fitting the data, we can obtain expressions for the constitutive model describing the viscoelastic behavior of the epoxy resin. In order to validate the reliability of the test results, a uniaxial tensile relaxation test was conducted on the epoxy resin casting body. The results show good agreement between the obtained uniaxial relaxation modulus curves and those derived from the bulk and shear relaxation modulus equations, confirming the validity of both the device design and the testing methodology.
- Open Access
Synthesis of a Novel P/N-Triazine-Containing Ring Flame Retardant and Its Application in Epoxy Resin
To meet the environmental protection and flame retardancy requirements for epoxy resins (EPs) in certain fields, in this study, a novel triazine-ring-containing DOPO-derived compound (VDPD), derived from vanillin, 2,4-Diamino-6-phenyl-1,3,5-triazine, and 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO), was synthesized using a one-pot method. Flame-retardant epoxy resin (FREP) was prepared by adding various ratios of VDPD to EP and curing with 4,4-diaminodiphenylmethane (DDM). The curing behavior, thermal stability, mechanical properties, and flame-retardant properties of the FREP were examined in various tests. According to the results, when the amount of VDPD added to the EP increased, the glass transition temperature of the FREP decreased linearly, and the flame-retardant properties gradually improved. With a 0.4 wt.% P content, the vertical burning rating of EP/DDM/VDPD-0.4 (according to the theoretical content of VDPD) reached the V-0 level, and the LOI value reached 33.1%. In addition, the results of a CCT showed that the peak heat release rate (PHRR) of EP/DDM/VDPD-0.4 decreased by 32% in comparison with that of the EP. Furthermore, compared with those of the EP, the tensile strength of EP/DDM/VDPD-0.4 decreased from 80.2 MPa to 74.3 MPa, only decreasing by 6 MPa, and the tensile modulus increased. Overall, VDPD can maintain the mechanical properties of EP and effectively improve its flame-retardant properties.
Open AccessSynthesis of a Novel P/N-Triazine-Containing Ring Flame Retardant and Its Application in Epoxy Resin
To meet the environmental protection and flame retardancy requirements for epoxy resins (EPs) in certain fields, in this study, a novel triazine-ring-containing DOPO-derived compound (VDPD), derived from vanillin, 2,4-Diamino-6-phenyl-1,3,5-triazine, and 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO), was synthesized using a one-pot method. Flame-retardant epoxy resin (FREP) was prepared by adding various ratios of VDPD to EP and curing with 4,4-diaminodiphenylmethane (DDM). The curing behavior, thermal stability, mechanical properties, and flame-retardant properties of the FREP were examined in various tests. According to the results, when the amount of VDPD added to the EP increased, the glass transition temperature of the FREP decreased linearly, and the flame-retardant properties gradually improved. With a 0.4 wt.% P content, the vertical burning rating of EP/DDM/VDPD-0.4 (according to the theoretical content of VDPD) reached the V-0 level, and the LOI value reached 33.1%. In addition, the results of a CCT showed that the peak heat release rate (PHRR) of EP/DDM/VDPD-0.4 decreased by 32% in comparison with that of the EP. Furthermore, compared with those of the EP, the tensile strength of EP/DDM/VDPD-0.4 decreased from 80.2 MPa to 74.3 MPa, only decreasing by 6 MPa, and the tensile modulus increased. Overall, VDPD can maintain the mechanical properties of EP and effectively improve its flame-retardant properties.
- 12 March 2024
- Published by Springer Nature in Applied Composite Materials
- Vol. 32 (5) , 2157-2175
Hygrothermal Behavior of Carbon Fiber Fabric Reinforced Vinylester Resin Composite Structures
- 12 March 2024
- Published by Springer Nature in Applied Composite Materials
- Vol. 32 (5) , 2157-2175
Hygrothermal Behavior of Carbon Fiber Fabric Reinforced Vinylester Resin Composite Structures
- Open Access
- 23 November 2023
- Published by Springer Nature in Research Square
Hygrothermal behavior of carbon fiber fabric reinforced vinylester resin composite structures
The hygrothermal aging of vinylester resin and its carbon fiber fabric reinforced composite structures are examined here, including moisture absorption and the resulting degradation of mechanical properties. The prepared resin casting and CFRP specimens were immersed into the deionized water and artificial seawater, respectively, at a temperature of 70°C, and weighed regularly along with the observation of surface morphologies using SEM and identification of variations in functional groups using FTIR spectrometer. Meanwhile, the mechanical properties of resin and CFRP were checked periodically. The results from gravimetric analysis show that resin immersed in deionized water behaves in non-Fickian diffusion due to strong hydrolysis, while CFRP obeys approximately the Fickian diffusion because of the embedded carbon fiber inhibiting the hydrolysis. The examination of mechanical properties for CFRP reveals that the interlaminar shear strength is influenced by the moisture absorption, with a maximum reduction of 13.5%.
- 23 November 2023
- Published by Springer Nature in Research Square
Open AccessHygrothermal behavior of carbon fiber fabric reinforced vinylester resin composite structures
The hygrothermal aging of vinylester resin and its carbon fiber fabric reinforced composite structures are examined here, including moisture absorption and the resulting degradation of mechanical properties. The prepared resin casting and CFRP specimens were immersed into the deionized water and artificial seawater, respectively, at a temperature of 70°C, and weighed regularly along with the observation of surface morphologies using SEM and identification of variations in functional groups using FTIR spectrometer. Meanwhile, the mechanical properties of resin and CFRP were checked periodically. The results from gravimetric analysis show that resin immersed in deionized water behaves in non-Fickian diffusion due to strong hydrolysis, while CFRP obeys approximately the Fickian diffusion because of the embedded carbon fiber inhibiting the hydrolysis. The examination of mechanical properties for CFRP reveals that the interlaminar shear strength is influenced by the moisture absorption, with a maximum reduction of 13.5%.
- 15 May 2023
- Published by Emerald Publishing in Multidiscipline Modeling in Materials and Structures
- Vol. 19 (4) , 587-603
Synthesis of an efficient phosphorus and triazine ring-containing reactive flame retardant for epoxy resin
Purpose: In order to find an appropriate method to synthesize a new high-efficiency flame retardant for epoxy resin.Design/methodology/approach: In this work, a flame retardant with heterocyclic groups, HOMP, was acquired after removing the obstacle from triazines which was not readily soluble. The molecular structure, thermal and flame retardant properties were fully characterized and analyzed. Also, the mechanism was researched through multi-methodologies. As well, the authors evaluated the effects of HOMP on mechanical properties.Findings: The results suggested that HOMP helped extinguish the combustion of specimens and could reach an LOI value of 29.2% and the V0 level in the UL-94 test with a phosphorus content of only 0.6wt%. With respect to the mechanism, HOMP was a gas-phase flame retardant and helped generate a thicker carbon protective coating. However, for the mechanical properties, the addition of HOMP enhanced the compressibility, while the tensile strength decreased significantly.Originality/value: The approach not only simplified the operations but also obtained HOMP with excellent flame retardant properties.
- 15 May 2023
- Published by Emerald Publishing in Multidiscipline Modeling in Materials and Structures
- Vol. 19 (4) , 587-603
Synthesis of an efficient phosphorus and triazine ring-containing reactive flame retardant for epoxy resin
Purpose: In order to find an appropriate method to synthesize a new high-efficiency flame retardant for epoxy resin.Design/methodology/approach: In this work, a flame retardant with heterocyclic groups, HOMP, was acquired after removing the obstacle from triazines which was not readily soluble. The molecular structure, thermal and flame retardant properties were fully characterized and analyzed. Also, the mechanism was researched through multi-methodologies. As well, the authors evaluated the effects of HOMP on mechanical properties.Findings: The results suggested that HOMP helped extinguish the combustion of specimens and could reach an LOI value of 29.2% and the V0 level in the UL-94 test with a phosphorus content of only 0.6wt%. With respect to the mechanism, HOMP was a gas-phase flame retardant and helped generate a thicker carbon protective coating. However, for the mechanical properties, the addition of HOMP enhanced the compressibility, while the tensile strength decreased significantly.Originality/value: The approach not only simplified the operations but also obtained HOMP with excellent flame retardant properties.
- Open Access
Experimental Investigation on Hygroscopic Aging of Glass Fiber Reinforced Vinylester Resin Composites
The hygroscopic behavior of vinylester resin and high strength glass fiber reinforced vinylester resin composites were examined here, including weight change and the resulting degradation of mechanical properties. The prepared resin and composites specimens were immersed in deionized water and artificial seawater with an applied temperature of 70 °C, and then the specimens were weighed at specified time intervals in combination with the observation of surface morphologies using a scanning electron microscope. Identification of variations of functional groups was also carried out using Fourier-transform infrared spectroscopy. Meanwhile, the mechanical properties for resin and the composite specimens were tested periodically. The observations on surficial morphologies and the test on weight change display that the vinylester resin hydrolyzes seriously after immersion in deionized water, and that the embedment of glass fiber effectively inhibits the moisture absorption and hydrolysis for resin matrix in composites. The results from the mechanical properties test reveal that the tensile strength of pure resin decreases by 35.3% after 7 days’ immersion and keeps small fluctuation in the sequent immersion duration. However, the compressive strength of pure resin consistently dwells at 100 ± 2 MPa during immersion. After immersion for 90 days, the tensile strength decreases by 28.5% and 38.4%, the compressive strength reduces by 7.2% and 16.6%, and the in-plane shear strength reduces by 16.6% and 15.2% for the composites immersed into deionized water and artificial seawater, respectively. The main highlights of this paper are that it provides a more comprehensive mechanical properties test in combination with the microscopic characterization on a matrix and its composites to reveal the aging behavior of composites under a hygroscopic environment.
Open AccessExperimental Investigation on Hygroscopic Aging of Glass Fiber Reinforced Vinylester Resin Composites
The hygroscopic behavior of vinylester resin and high strength glass fiber reinforced vinylester resin composites were examined here, including weight change and the resulting degradation of mechanical properties. The prepared resin and composites specimens were immersed in deionized water and artificial seawater with an applied temperature of 70 °C, and then the specimens were weighed at specified time intervals in combination with the observation of surface morphologies using a scanning electron microscope. Identification of variations of functional groups was also carried out using Fourier-transform infrared spectroscopy. Meanwhile, the mechanical properties for resin and the composite specimens were tested periodically. The observations on surficial morphologies and the test on weight change display that the vinylester resin hydrolyzes seriously after immersion in deionized water, and that the embedment of glass fiber effectively inhibits the moisture absorption and hydrolysis for resin matrix in composites. The results from the mechanical properties test reveal that the tensile strength of pure resin decreases by 35.3% after 7 days’ immersion and keeps small fluctuation in the sequent immersion duration. However, the compressive strength of pure resin consistently dwells at 100 ± 2 MPa during immersion. After immersion for 90 days, the tensile strength decreases by 28.5% and 38.4%, the compressive strength reduces by 7.2% and 16.6%, and the in-plane shear strength reduces by 16.6% and 15.2% for the composites immersed into deionized water and artificial seawater, respectively. The main highlights of this paper are that it provides a more comprehensive mechanical properties test in combination with the microscopic characterization on a matrix and its composites to reveal the aging behavior of composites under a hygroscopic environment.
- Open Access
The Effects of a Macromolecular Charring Agent with Gas Phase and Condense Phase Synergistic Flame Retardant Capability on the Properties of PP/IFR Composites
In order to improve the efficiency of intumescent flame retardants (IFRs), a novel macromolecular charring agent named poly(ethanediamine-1,3,5-triazine-p-4-amino-2,2,6,6-tetramethylpiperidine) (PETAT) with gas phase and condense phase synergistic flame-retardant capability was synthesized and subsequently dispersed into polypropylene (PP) in combination with ammonium polyphosphate (APP) via a melt blending method. The chemical structure of PETAT was investigated by Fourier transform infrared spectroscopy (FTIR), and 1H nuclear magnetic resonance (NMR) spectroscopy. Thermal properties of the PETAT and IFR systems were tested by thermogravimetric-derivative thermogravimetric analysis (TGA-DTG) and thermogravimetry–Fourier transform infrared spectroscopy (TG-FTIR). The mechanical properties, thermal stability, flame-retardant properties, water resistance, and structures of char residue in flame-retardant composites were characterized using tensile and flexural strength property tests, TGA, limiting oxygen index (LOI) values before and after soaking, underwritten laboratory-94 (UL-94) vertical burning test, cone calorimetric test (CCT), scanning electron microscopy with energy dispersive X-ray spectrometry (SEM-EDXS), and FTIR. The results indicated that PETAT was successfully synthesized, and when the ratio of APP to PETAT was 2:1 with 25 wt % loading, the novel IFR system could reduce the deterioration of tensile strength and enhance the flexural strength of composites. Meanwhile, the flame-retardant composite was able to pass the UL-94 V-0 rating with an LOI value of 30.3%, and the peak of heat release rate (PHRR), total heat release (THR), and material fire hazard values were considerably decreased compared with others. In addition, composites also exhibited excellent water resistance properties compared with traditional IFR composites. SEM-EDXS and FTIR analyses of the char residues, as well as TG-FTIR analyses of IFR were used to investigate the flame-retardant mechanism of the APP/PETAT IFR system. The results indicated that the efficient flame retardancy of PP/IFR composites could be attributed to the synergism of the free radical-quenching and char layer-protecting mechanisms in the gas phase and condense phase, respectively.
Open AccessThe Effects of a Macromolecular Charring Agent with Gas Phase and Condense Phase Synergistic Flame Retardant Capability on the Properties of PP/IFR Composites
In order to improve the efficiency of intumescent flame retardants (IFRs), a novel macromolecular charring agent named poly(ethanediamine-1,3,5-triazine-p-4-amino-2,2,6,6-tetramethylpiperidine) (PETAT) with gas phase and condense phase synergistic flame-retardant capability was synthesized and subsequently dispersed into polypropylene (PP) in combination with ammonium polyphosphate (APP) via a melt blending method. The chemical structure of PETAT was investigated by Fourier transform infrared spectroscopy (FTIR), and 1H nuclear magnetic resonance (NMR) spectroscopy. Thermal properties of the PETAT and IFR systems were tested by thermogravimetric-derivative thermogravimetric analysis (TGA-DTG) and thermogravimetry–Fourier transform infrared spectroscopy (TG-FTIR). The mechanical properties, thermal stability, flame-retardant properties, water resistance, and structures of char residue in flame-retardant composites were characterized using tensile and flexural strength property tests, TGA, limiting oxygen index (LOI) values before and after soaking, underwritten laboratory-94 (UL-94) vertical burning test, cone calorimetric test (CCT), scanning electron microscopy with energy dispersive X-ray spectrometry (SEM-EDXS), and FTIR. The results indicated that PETAT was successfully synthesized, and when the ratio of APP to PETAT was 2:1 with 25 wt % loading, the novel IFR system could reduce the deterioration of tensile strength and enhance the flexural strength of composites. Meanwhile, the flame-retardant composite was able to pass the UL-94 V-0 rating with an LOI value of 30.3%, and the peak of heat release rate (PHRR), total heat release (THR), and material fire hazard values were considerably decreased compared with others. In addition, composites also exhibited excellent water resistance properties compared with traditional IFR composites. SEM-EDXS and FTIR analyses of the char residues, as well as TG-FTIR analyses of IFR were used to investigate the flame-retardant mechanism of the APP/PETAT IFR system. The results indicated that the efficient flame retardancy of PP/IFR composites could be attributed to the synergism of the free radical-quenching and char layer-protecting mechanisms in the gas phase and condense phase, respectively.