CSChristopher M. Saffron

Christopher M. Saffron

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Christopher M. Saffron has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Electrocatalytic cleavage of lignin model dimers using ruthenium supported on activated carbon cloth

    by Mahlet Garedew, Daniel Young-Farhat, Souful Bhatia, Pengchao Hao, James E. Jackson, Christopher M. Saffron

    Biomass lignin is the largest natural source of renewable aromatic compounds, creating an opportunity for its use as a feedstock provided that deconstruction and upgrading methods become available. Valorization of lignin is challenging because its complex structure is naturally recalcitrant to biological degradation. Deconstruction of this amorphous cross-linked polymer requires cleavage of aryl ether bonds, which account for more than half of the linkages between lignin's phenylpropanoid building blocks. High temperature cracking of lignin is possible via pyrolysis, but linkages such as 4-O-5 bonds are resistant to thermal degradation. Electrocatalytic hydrogenation offers a mild alternative; operated at low temperature and atmospheric pressure, it cleaves ether bonds while saturating aromatic rings with in situ generated hydrogen. To investigate the use of catalytic ruthenium supported on activated carbon cloth to cleave 4-O-5 bonds, model compounds that exhibit this linkage were selected, including 3-phenoxyphenol, 4-phenoxyphenol, 3-phenoxyanisole, and 3-phenoxytoluene. The two phenols, 3-phenoxyphenol and 4-phenoxyphenol, were cleaved and hydrogenated to form cyclohexanol. 3-Phenoxyanisole and 3-phenoxytoluene were also cleaved but with lower conversion rates and cyclohexanol yields. Alkaline electrolyte solutions showed the highest cyclohexanol yields for both substrates. Increasing substrate concentrations from 10 mM to 40 mM increased faradaic efficiency to 25%, while decreasing current density from 100 mA (33.33 mA cm−2) to 20 mA (6.67 mA cm−2) greatly improved the faradaic efficiency to 96%.


  • Resources from Wastes: Benefits and Complexity

    by Steven I. Safferman, Jason S. Smith, Younsuk Dong, Christopher M. Saffron, James M. Wallace, David Binkley, Michael R. Thomas, Steve A. Miller, Ed Bissel, Justin Booth, et al.

    The United States produces significant quantities of waste biomass from wastewater treatment, food production, food services, and landscape and wood debris. This waste contains essential resources, including water, carbon, and nutrients. Conversion of carbon to energy and recovery of nutrients and water have the potential to reduce the use of scarce resources, protect the environment, and save funds. Several established, demonstrated technologies that convert wastes to resources are available and are reviewed in this paper. Included are anaerobic digestion, direct combustion, biodiesel production, ethanol production, and particulate phosphorus and organic nitrogen separation using ultrafiltration, ammonia stripping, and reverse osmosis. Thermochemical technologies include pyrolysis, torrefaction, and gasification. Unlike solar, wind, hydrological (dams and pumped storage), and closed-loop geothermal renewable energy technologies, the transportation of biomass can be energy intensive. Therefore, a holistic evaluation of complexity, costs, and benefits of converting wastes to resources is mandatory to ensure a net-positive energy value and environmental protection. Several tools described in this paper are available to aid stakeholders when considering biomass waste-to-resource projects. Many of these tools have long been in practice and have been extensively covered in technical and popular literature. As interest in renewable energy resources increases, new tools are being developed to address the challenges posed by biomass projects. This paper discusses tools that combine waste biomass inventories with a geographic information system mapping platform and cost-benefit analysis that return environmental, economic, and financial assessments of selected feedstocks that can be used in planning, siting, and financing a biomass-to-energy project.


  • A mild approach for bio-oil stabilization and upgrading: electrocatalytic hydrogenation using ruthenium supported on activated carbon cloth

    by Zhenglong Li, Shantanu Kelkar, Lauren Raycraft, Mahlet Garedew, James E. Jackson, Dennis J. Miller, Christopher M. Saffron

    Electrocatalytic hydrogenation (ECH) offers a new approach for bio-oil stabilization (a.k.a. partial upgrading). Water-soluble bio-oil, obtained by aqueous extraction of the liquid product of biomass pyrolysis, was hydrogenated using ECH at room conditions. A new electrocatalyst, ruthenium supported on activated carbon cloth, was used as the catalytic cathode. After electrocatalytic hydrogenation, aldehydes and ketones were reduced to the corresponding alcohols or diols, forms less prone to condensation chemistry. Carbon recovery into the liquid product, important when making liquid fuels from biomass, was more than 80%, while less than 0.1 wt% of the water-soluble bio-oil formed solid precipitate. The stability of the ECH-treated water-soluble bio-oil was checked via an accelerated aging test followed by size exclusion chromatography analysis and viscometry. Besides stabilization of bio-oil for subsequent fuel production, hydrogen and valuable diols were produced during ECH. Strategies to optimize the energy efficiency of this approach by altering the cell design, modifying the catalyst and adjusting the reaction conditions were also explored.


  • Aromatics from biomass pyrolysis vapour using a bifunctional mesoporous catalyst

    by Shantanu Kelkar, Christopher M. Saffron, Zhenglong Li, Seong-Su Kim, Thomas J. Pinnavaia, Dennis J. Miller, Robert Kriegel

    Zeolites with uniform intracrystal mesopores, designated MSU-MFI, were prepared using silane-modified polymers as mesopore-generating agents. X-ray diffraction analysis of this catalyst showed Braggs peaks representative of MFI structure. Catalyst characterization by nitrogen physisorption revealed a mesoporous structure with high surface area, pore size and volume. The MSU-MFI catalysts developed in this study were selective toward aromatic chemical production from poplar pyrolysis vapour. Yields of generalized products and aromatics were comparable to those obtained from conventional microporous ZSM-5 analogs as demonstrated by pyroprobe-gas chromatography/mass spectrometry and thermogravimetric analysis. While ZSM-5 was more selective to smaller C6 aromatics and naphthalenes, MSU-MFI catalysts were more selective to C8 and C9 monoaromatics. The incorporation of gallium(III) ions in MSU-MFI using the incipient wetness method increased aromatic yields by up to 15% over Ga-free catalysts and decreased the coke production by up to 6% (p < 0.05). Due to high yields and low coke formation, Ga-MSU-MFI offers an improved option for making non-oxygenated aromatic chemicals from photosynthetic biomass.


  • Mild electrocatalytic hydrogenation and hydrodeoxygenation of bio-oil derived phenolic compounds using ruthenium supported on activated carbon cloth

    by Zhenglong Li, Mahlet Garedew, Chun Ho Lam, James E. Jackson, Dennis J. Miller, Christopher M. Saffron

    Electrocatalytic hydrogenation (ECH) is an option for stabilizing or upgrading bio-oil that employs mild conditions (≤80 °C and ambient pressure) compared to hydrotreatment. In this study, phenol, guaiacol (2-methoxyphenol), and syringol (2,6-dimethoxyphenol) were chosen as model lignin-like substrates because of their abundance in bio-oil and their high resistance to hydrogenation relative to the carbonyl compounds. Cathodic reduction was catalyzed by ruthenium supported on activated carbon cloth (Ru/ACC), a novel electrocatalyst. Incipient wetness impregnation and cation exchange methods were employed to prepare the electrocatalyst using three different ruthenium precursors. Scanning electron microscopy revealed that ruthenium nanoparticles within the range of 10 to 20 nm were deposited on the support by both catalyst synthesis methods. Catalysts prepared by cation exchange were more active than those prepared using incipient wetness impregnation, presumably because of support surface functionalization by the oxidation pretreatment. When using incipient wetness impregnation, catalysts synthesized with precursor hexaammineruthenium(III) chloride showed the best activity and electrochemical efficiency, followed by catalysts prepared with ruthenium(III) chloride and ruthenium(III) nitrosyl nitrate. The Ru/ACC electrocatalyst reduced guaiacol, phenol and syringol with similar electrochemical efficiencies, but temperature was an important variable; the electrochemical efficiency for guaiacol reduction increased from 8% at 25 °C to 17% at 50 °C, but then dropped back to 10% at 80 °C. Solution pH also affected catalyst activity and product selectivity, with acidic conditions favoring guaiacol conversion, electrochemical efficiency and cyclohexanol selectivity.


  • Open Access

    Structural characterization of alkaline hydrogen peroxide pretreated grasses exhibiting diverse lignin phenotypes

    by Muyang Li, Cliff Foster, Shantanu Kelkar, Yunqiao Pu, Daniel Holmes, Arthur Ragauskas, Christopher M Saffron, David B Hodge

    Background: For cellulosic biofuels processes, suitable characterization of the lignin remaining within the cell wall and correlation of quantified properties of lignin to cell wall polysaccharide enzymatic deconstruction is underrepresented in the literature. This is particularly true for grasses which represent a number of promising bioenergy feedstocks where quantification of grass lignins is particularly problematic due to the high fraction of p- hydroxycinnamates. The main focus of this work is to use grasses with a diverse range of lignin properties, and applying multiple lignin characterization platforms, attempt to correlate the differences in these lignin properties to the susceptibility to alkaline hydrogen peroxide (AHP) pretreatment and subsequent enzymatic deconstruction. Results: We were able to determine that the enzymatic hydrolysis of cellulose to to glucose (i.e. digestibility) of four grasses with relatively diverse lignin phenotypes could be correlated to total lignin content and the content of p-hydroxycinnamates, while S/G ratios did not appear to contribute to the enzymatic digestibility or delignification. The lignins of the brown midrib corn stovers tested were significantly more condensed than a typical commercial corn stover and a significant finding was that pretreatment with alkaline hydrogen peroxide increases the fraction of lignins involved in condensed linkages from 88–95% to ~99% for all the corn stovers tested, which is much more than has been reported in the literature for other pretreatments. This indicates significant scission of β-O-4 bonds by pretreatment and/or induction of lignin condensation reactions. The S/G ratios in grasses determined by analytical pyrolysis are significantly lower than values obtained using either thioacidolysis or 2DHSQC NMR due to presumed interference by ferulates. Conclusions: It was found that grass cell wall polysaccharide hydrolysis by cellulolytic enzymes for grasses exhibiting a diversity of lignin structures and compositions could be linked to quantifiable changes in the composition of the cell wall and properties of the lignin including apparent content of the p-hydroxycinnamates while the limitations of S/G estimation in grasses is highlighted.