RSRun-Cang Sun

Run-Cang Sun

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Run-Cang Sun has a total of 64 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Homogeneous Modification of Cellulose in Ionic Liquid with Succinic Anhydride Using N-Bromosuccinimide as a Catalyst

    by Chuan-Fu Liu, Ai-Ping Zhang, Wei-Ying Li, Feng-Xia Yue, Run-Cang Sun

    The homogeneous chemical modification of cellulose with succinic anhydride was investigated in a solvent system containing 1-butyl-3-methylimidazolium chloride ionic liquid and dimethylsulfoxide using N-bromosuccinimide (NBS) as a catalyst. The results showed that the degree of substitution of the succinylated cellulosic samples, in the range of 0.24−2.31, noticeably increased as compared with the products without any catalysts, indicating that NBS was a novel efficient catalyst for cellulose succinoylation in ionic liquids. Fourier transform infrared and solid-state cross-polarization/magic angle spinning 13C NMR spectroscopies also provided evidence of succinoylation reaction. The results indicated that the reaction of hydroxyl groups at C-6, C-2, and C-3 positions in cellulose occurred. The thermal stability of the succinylated cellulose was found to decrease upon chemical modification.


  • Preparation of Hemicellulosic Derivatives with Bifunctional Groups in Different Media

    by Jun-Li Ren, Feng Peng, Run-Cang Sun

    Wheat straw hemicelluloses were converted to novel bifunctional hemicellulosic derivatives by etherification using acrylamide as reactant and sodium hydroxide as catalyst. The degree of substitution can be monitored by altering the molar ratio of acrylamide to xylose unit in hemicelluloses in the range of 1.0−10.0 and the molar ratio of sodium hydroxide to xylose unit in hemicelluloses in the range of 0.5−1.6, without changing the structure of the hemicelluloses. Comparison of the reaction in different media is discussed in detail. The optimized product with a high DS value of 0.58 was obtained by varying the condition parameters. Novel hemicellulosic derivatives containing carbamoylethyl and carboxyethyl groups could be confirmed by FT-IR, 1H NMR, and 13C NMR spectroscopies. The behavior of hemicellulosic derivatives was monitored by means of thermogravimetry (TG) and differential thermal analysis (TGA). It was found that the product with a high DS had a lower thermal stability than the native hemicelluloses.


  • Rapid esterification of wheat straw hemicelluloses induced by microwave irradiation

    by Feng Xu, Jian-Xing Jiang, Run-Cang Sun, Dai She, Bai Peng, Jin-Xia Sun, John F. Kennedy


  • Fractional Separation of Hemicelluloses and Lignin in High Yield and Purity from Mild Ball-Milled Periploca sepium

    by Feng Xu, Run-Cang Sun, Mei-Zhi Zhai, Jin-Xia Sun, Diao She, Zhen-Chao Geng, Qi Lu

    A novel three-step procedure for separation of hemicelluloses and lignin with high yield and purity was proposed in this study, where wood is mildly milled and successively extracted to produce three hemicellulosic and lignin fractions representing the total hemicelluloses and lignin in wood. The sequential treatments of the mild ball-milled Periploca sepium with 80% aqueous dioxane containing 0.05 M HCl at 85°C for 4 h, DMSO at 85°C for 4 h, and 8% NaOH at 50°C for 3 h resulted in a total release of over 85% of the original hemicelluloses and 86% of the original lignin. In particular, approximately 36% of the original hemicelluloses and 50% of the original lignin were separated during the first mild acidolytic hydrolysis process after low intensity milling. The structure of the acidic dioxane-, DMSO-, and alkali-soluble hemicellulosic and lignin fractions were elucidated using wet chemical analysis, FT-IR, and solution-state 1H, 13C, and 31P NMR techniques. Results showed that both the mild ball milling and the mild acidolysis under the conditions given did not affect the separated lignin macromolecular structure. On the other hand, the mild acidolytic hydrolysis condition did cause substantial hemicellulosic depolymerization exception for a significant cleavage the ether linkages between lignin and hemicelluloses. The acidic dioxane-soluble lignin fraction was structurally different from the DMSO- and alkali-soluble lignin preparations and may originate mainly from the primary wall, while the alkali-soluble lignin preparation was mainly released from the secondary wall of Periploca sepium. Furthermore, it was found that the acidic dioxane-soluble hemicelluloses mainly contained more branched and less acidic arabinoxylans, and the 8% NaOH-soluble hemicellulosic fraction H3 was both less branched and less acidic in structure, whereas the DMSO-soluble hemicelluloses were more acidic but less branched and consisted mainly of 4-O-methylglucuronoarabinoxylan.


  • Synthesis of cationic hemicellulosic derivatives with a low degree of substitution in dimethyl sulfoxide media

    by J. L. Ren, F. Peng, R. C. Sun, C. F. Liu, Z. N. Cao, W. Luo, J. N. Tang

    A series of water‐soluble cationic 2‐hydroxylpropyltrimethylammonium hemicellulosic derivatives with low average degrees of substitution (DS's) were prepared by the incorporation of the cationic moiety 2,3‐epoxypropyltrimethylammonium chloride (ETA) onto the backbone of hemicelluloses in the presence of NaOH as a nucleophilic catalyst in homogeneous dimethyl sulfoxide (DMSO) media. The dependence of the homogeneous reaction on the different affecting factors was investigated. The average DS was calculated from the N/C ratio in the products and from the weight gain. The degree of substitution determined by the nitrogen content (DSN) values up to 0.25 in a one‐step synthesis of the etherified hemicelluloses could be controlled by the adjustment of the amount of solvent used and the molar ratio of NaOH or ETA to the anhydromonomer units in the hemicelluloses. The structure of the cationic hemicellulosic derivatives formed was determined by Fourier transform infrared spectroscopy and further confirmed with solution‐state 13C‐NMR spectroscopy. In comparison, no significant degradation of the hemicellulosic derivatives occurred during the etherification of the polymers in the homogeneous DMSO system. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008


  • Structural characterization of residual lignins isolated with cyanamide‐activated hydrogen peroxide from various organosolvs pretreated wheat straw

    by F. Xu, Z. C. Geng, C. F. Liu, J. L. Ren, J. X. Sun, R. C. Sun

    The posttreatment of various organosolvs pretreated wheat straw with cyanamide‐activated hydrogen peroxide was studied. About 44–80% of the total residual lignin and 38–85% of the total residual hemicelluloses were released or degraded during the posttreatment with 1.8% H2O2–0.18% cyanamide at 50°C under pH 10.0 for 4 h from different aqueous organic acids or alcohols pretreated straw. The seven degraded residual lignin preparations were subjected to a comprehensive physicochemical and structural characterization by UV, FTIR, and 1H and 13NMR spectroscopy, and GPC. The nitrobenzene oxidation method was also applied to the in situ lignins. It was found that the seven residual lignin preparations contained large amounts of noncondensed syringyl and guaiacyl units, together with fewer noncondensed p‐hydroxyphenyl units, esterified p‐coumaric acid, and mainly etherified ferulic acid. All of the lignin fractions are free of associated polysaccharides and had molecular‐average weights ranging between 2980 and 3820 g mol−1. Analysis of these low molecular weight degradation products revealed an oxidation of residual lignin had occurred. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008


  • Comparative study of three lignin fractions isolated from mild ball‐milled Tamarix austromogoliac and Caragana sepium

    by Feng Xu, Run‐Cang Sun, Mei‐Zhi Zhai, Jin‐Xia Sun, Jian‐Xin Jiang, Guang‐Jie Zhao

    Six lignin fractions from mild ball‐milled Tamarix austromogoliac (TA) and Caragana sepium (CS) were sequentially isolated with 80% dioxane containing 0.05M HCl at 75°C for 4 h, 50% aqueous ethanol containing 1M triethylamine at 70°C for 4 h, and 8% aqueous NaOH at 45°C for 3 h. The results showed that the successive treatments made it possible to isolate lignin from wood with a high yield and purity, in which 89.4 and 90.6% of the original lignin from TA and CS were released, respectively. The lignin fractions isolated with the three‐step method were analyzed with Fourier transform infrared, 1H‐ and 13C‐NMR, alkaline nitrobenzene oxidation, and gel permeation chromatography. It was found that the three lignin fractions isolated from TA were rich in syringyl units, and the molar ratio of the relatively total moles of vanillin, vanillic acid, and acetovanillin to the relatively total moles of syringaldehyde, syringic acid, and acetosyringone decreased from 1: 2.6 to 1 : 3.2 to 1: 3.6 in the lignin preparations, whereas this ratio in the corresponding lignin fractions isolated from CS was found to be 1.4 : 1, 1.1 : 1, and 1 : 1.4, respectively. More importantly, the results revealed that the sequential extractions of the mild ball‐milled TA and CS with 80% acidic dioxane, 50% alkaline ethanol, and 8% aqueous NaOH under the conditions used did not significantly cleave the β–O‐4 and α–O‐4 linkages in lignin macromolecules. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008


  • Open Access

    Preparation and characterization of sugarcane bagasse hemicellulosic derivatives containing quaternary ammonium groups in various media

    by Ren Jun-Li, Liu Chuan-Fu, Sun Run-Cang, She Diao, Liu Jian-Chao

    To increase the solubility and produce cationic or ampholytic polymers as beater additives in papermaking from native hemicelluloses, quaternization of hemicelluloses were performed by reacting hemicelluloses with 3-chloro-2- hydroxypropyltrimethylammonium chloride (CHMAC) and preferably with 2,3- epoxypropyltrimethylammonium chloride (ETA) in aqueous sodium hydroxide, homogenously in dimethyl sulfoxide (DMSO), and completely heterogeneously in ethanol/water, respectively. The extent of modification was measured by degree of substitution (DS), and its value of up to 0.55 can be controlled by adjusting the molar ratio of reagent to hydroxyl functionality in hemicelluloses and the concentration of sodium hydroxide. The characterization of hemicellulosic derivatives was performed by elemental analysis, GPC, FT-IR and 13 C NMR spectroscopy as well as thermal analysis. It was found that hemicellulosic polymer was significantly degraded in aqueous sodium hydroxide solution compared with in dimethyl sulfoxide and in ethanol/water systems under the conditions given. The thermal stability of modified hemicelluloses decreased after chemical modification, corresponding to the decreasing M w of hemicelluloses derivatives.


  • Characterization of Galactomannan Gum from Fenugreek (Trigonella foenum-graecum) Seeds and Its Rheological Properties

    by J. X. Jiang, L. W. Zhu, W. M. Zhang, R. C. Sun

    Galactomannan, a water-soluble heteropolysaccharide, was isolated from the seed of Chinese traditional medicine fenugreek. The polysaccharide was characterized by using both chemical and chromatographic procedures, as well as FT-IR, 1H NMR, 13C NMR spectroscopy. The results showed that the polysaccharide consists of D-mannopyranose and D-galactopyranose residues with a molar ratio of 1.2:1.0. The main chain of this galactomannan comprises β-(1,4)-linked D-mannopyranose residues, in which 83.3% of the main chain is substituted at C-6 with a single residue of α-(1,6)-D-galactopyranose. The galactomannan had a molecular weight Mw of 3.23 × 105 g mol−1 and an intrinsic water viscosity of 235 mL g−1. Fenugreek gum (seed endosperm) contains 73.6% galactomannan. The viscosity of fenugreek gum at 1% concentration is 286 mPa.s (30°C, 170 s−1). The viscosity of the solutions decreased sharply as the rate of shear increased, but rose with increased concentration, and decreased as the temperature of fully hydrated gum solution was gradually raised from 30 to 90°C. Fenugreek gum can be a highly efficient water-thickening agents and can be used in food industry and drug delivery formulations.


  • Fractional Separation and Structural Characterization of Chlorophyll and Lignin from Perennial Ryegrass (L. perenne) and Cocksfoot Grass (D. glomerata)

    by F. Xu, C. F. Liu, J. L. Ren, J. X. Sun, R. C. Sun, S. Curling, P. Fowler, M. S. Baird

    One chlorophyll rich fraction and two lignin preparations were separated from perennial grass and cocksfoot grass by sequential three‐stage treatments with 80% ethanol containing 0.2% NaOH, 2.5% H2O2−0.2% EDTA containing 1.5% NaOH, and 2.5% H2O2−0.2% TAED containing 1.0% NaOH at 75°C for 3 h, respectively, which released 4.6 and 3.6% chlorophyll rich fraction, 2.3 and 5.8%, and 0.9 and 1.0% lignin preparations, except for releasing 8.0 and 10.4%, 79.1 and 77.0%, and 12.9 and 12.5% of the original hemicelluloses, respectively. The lignin fractions obtained from the two different grasses had very similar molecular weights and structural composition. The NMR spectra of the lignin preparations revealed the presence of p‐hydroxyphenyl, guaiacyl, and syringyl structures, and the lignin in chlorophyll rich fraction contained more guaiacyl and syringyl units than p‐hydroxyphenyl unit, whereas the reverse trend was found in the two lignin preparations. The lignin preparations are distinguished with straw and wood lignins by relatively higher contents of p‐hydroxyphenyl unit and lower amounts of condensed units (β‐5 and 5‐5′) and resinol units (β‐β). This difference in distribution of structural units indicated some structural heterogeneity between grass and straw/or wood lignin.