MKMarcel Kossel

Marcel Kossel

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Marcel Kossel has a total of 89 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Low-Latency Reconstruction-Based Symbol Error Correction for PAM-4 DSP-Based Wireline Receivers

    by Yujin Choi, Donggeon Kim, Seoyoung Jang, Seongjin Kim, Dohyeon Kwon, Matthias Braendli, Jaewon Lee, Thomas Morf, Marcel Kossel, Korkut Kaan Tokgoz, et al.

  • A 76-Gb/s DSP-DAC-Based Discrete Multitone Wireline Transmitter in 5-nm FinFET

    by Seoyoung Jang, Marcel Kossel, Jaewon Lee, Matthias Brändli, Thomas Morf, Yujin Choi, Donggeon Kim, Gayoung Kang, Yoonji Choi, Pier-Andrea Francese, et al.

    This article presents a 76-Gb/s digital-to-analog converter (DAC)-based discrete multitone (DMT) wireline transmitter (TX) fabricated in 5-nm FinFET. The TX employs a 16-way parallel multi-path delay feedback (MDF) inverse fast Fourier transform (IFFT) processor for area-efficient implementation. The TX digital signal processor (DSP) includes on-chip bit/power-loading and cyclic-prefix (CP) insertion logic and supports 4- to 256-QAM modulation formats across 31 orthogonal subchannels. The time-domain DMT samples generated by the TX DSP are converted into analog waveform using a source-series termination (SST)-based DAC. The prototype is demonstrated over a channel with 9.7-dB insertion loss (IL) at Nyquist, achieving a bit error rate (BER) of 2.1E-4 with a total power consumption of 144 mW from 0.735-V digital and 0.725-V analog supplies, resulting in an energy efficiency of 1.89 pJ/b. The proposed DMT TX improves bandwidth efficiency and signal-to-noise ratio (SNR) over conventional pulse-amplitude modulation (PAM)-based transmitters by employing frequency-domain modulation and equalization. This work is the first demonstration of a DAC-based DMT TX operating at >76 Gb/s fabricated in advanced CMOS technology.

  • Open Access

    Cryogenic CMOS RF AWGs for Qubit Control

    by Sudipto Chakraborty, Marcel Kossel, Matthias Brändli, Pier-Andrea Francese, Mridula Prathapan, Pat Rosno, Mark Yeck, John F. Bulzacchelli, Daniil Frolov, David J. Frank, et al.

    This paper presents design approaches for two radio frequency (RF) arbitrary waveform generators (AWGs) operating at cryogenic temperatures using FinFET CMOS technologies. The paper presents power, performance, and area trade-offs for highly scaled quantum computing systems using different types of qubits (spin and transmons). The first considered design uses a direct digital synthesis (DDS) approach to provide a wide bandwidth (1−18 GHz) control solution for spin qubits. As this design point was implemented in two technology nodes (14 nm and 7 nm CMOS), it offers a window into the benefits for this application arising from technology scaling. Furthermore, the DDS architecture offers flexibility to meet the requirements of the rapidly evolving requirements of spin qubits and naturally supports a high degree of programmability of the amplitude, phase, duration, frequency and spacing of control waveforms. The DDS-based wideband radio frequency digital to analog converter (DAC) was demonstrated operational over the full 1 to 18 GHz target operating range, providing sufficient bandwidth for control signals for state-of-the-art spin qubit platforms. The second design approach uses various techniques for highly reconfigurable, low power control waveform generation for transmon qubits using current mode analog design. This second approach, implemented using two 14nm FinFET CMOS designs, has enabled the investigation of design-driven power scaling techniques. The DDS-based single spin qubit controller consumes 40−140 mW, occupying 0.5 mm2 in a 14 nm FinFET node implementation, and 30−68 mW, occupying 0.1 mm2 in a 7 nm FinFET node. The current mode transmon qubit controller designs, both implemented in 14 nm FinFET, consume 23 mW and 12.8 mW, respectively, occupying 1.61 mm2 and 1.32 mm2 per qubit controller, respectively.


  • A 112-Gb/s Discrete Multitone Wireline Receiver Datapath With Time-Interleaved Time-Based ADC in 5-nm FinFET

    by Jaewon Lee, Pier-Andrea Francese, Matthias Bräendli, Thomas Morf, Marcel Kossel, Seoyoung Jang, Yujin Choi, Donggeon Kim, Taekwang Jang, Gain Kim

    This article presents a 112-Gb/s discrete multitone (DMT) wireline receiver (RX) datapath with a 50-GS/s, 8-bit, 64-way ( $8 \times 8$ ) time-interleaved time-based analog-to-digital converter (TI-TBADC) in a 5-nm FinFET. The TBADC converts the voltage input into a time-domain quantity using a ring oscillator (ROSC). Eight-slice TBADCs, driven from the same first-rank interleaver, share the identical injection-locked ROSC (IROSC) for voltage-to-time conversion (VTC). The DMT digital signal processor (DSP) achieves optimal bit and power loading with 63 orthogonal subchannels by employing a 64-way single-stage multi-path delay feedback (MDF) fast Fourier transform (FFT) core. An on-chip sign-sign least mean square (SS-LMS) engine adapts equalizer coefficients to combat channel fluctuation. The RX prototype demonstrates 4E-4 BER when communicating over the channel, exhibiting 18-dB insertion loss (IL) at Nyquist, while consuming 347-mW power and 0.242-mm2 silicon area.


  • A 2-Lane DAC-/ADC-Based 2 × 2 MIMO PAM-4 MMSE-DFE Wireline Transceiver With FEXT Cancellation on RFSoC Platform

    by Jaewon Lee, Seoyoung Jang, Yujin Choi, Donggeon Kim, Matthias Braendli, Thomas Morf, Marcel Kossel, Pier-Andrea Francese, Gain Kim

    This article presents a 2-lane $2 \times 2$ multiple-input, multiple-output (MIMO) 4-level pulse amplitude modulation (PAM-4) minimum mean-squared-error (MMSE)-decision-feedback equalizer (DFE) with far-end crosstalk (FEXT) cancellation for digital-to-analog converter (DAC)-/analog-to-digital converter (ADC)-based high-speed serial links. The receiver (RX) datapath is designed with a 15-tap MIMO feedforward equalizer (FFE) and a one-tap MIMO DFE with the least mean square (LMS), enabling adaptation to channel variation while maintaining the MMSE setting. The RX digital signal processor (DSP) place and route (PnR) in a 28-nm CMOS is estimated to consume 201 mW/lane at a 56-Gb/s/lane data rate while occupying a 0.5-mm2/lane silicon area. We further implement a real-time evaluation platform to verify the functionality of the MIMO PAM-4 MMSE-DFE with rapid bit-error-rate (BER) testing on RFSoC. The measurement result demonstrates that the MIMO MMSE-DFE significantly improves BER performance from 2.75e−3 to 1.31e−7 compared with equalization without FEXT cancellation when communicating over a channel exhibiting 12.4-dB insertion loss (IL) and 13.2-dB IL-to-crosstalk ratio (ICR) at Nyquist.


  • A Discrete Multitone Wireline Transceiver Datapath With On-Chip Sign-Sign LMS Adaptation and Loading Profile Optimization on RFSoC

    by Jaewon Lee, Seoyoung Jang, Donggeon Kim, Yujin Choi, Jong-Hyeok Yoon, Matthias Braendli, Thomas Morf, Marcel Kossel, Pier-Andrea Francese, Gain Kim

    This brief presents a discrete multi-tone (DMT) wireline transceiver (TRX) datapath and introduces the RFSoC-based real-time hardware platform to quickly sweep the optimum bit and power loading profile constrained by the peak-to-average-power ratio (PAPR). The datapath is implemented based on 32-parallel multi-path delay feedback (MDF) fast Fourier transform (FFT)/inverse FFT (IFFT) processors to save resources, integrating with the sign-sign least mean square (SS-LMS) engine. The loading is computed for the channel signal-to-noise ratio (SNR) and PAPR. The platform consists of 2.048 GS/s data converters, the DMT datapath implemented on programmable logic (PL) running at 64 MHz, and the channel board. This system enables a quick bit-error-rate (BER) test at an order of 1.0E-9, accelerating the finding of optimal loading with realistic hardware effects and random clipping events. Experimental results show that the data rate could reach a maximum of 6.82 Gb/s at a BER of 5.7E-4 and a minimum BER of 3.7E-7 for a target data rate of 4.81 Gb/s with a channel exhibiting 16.3 dB insertion loss (IL) at Nyquist.


  • A Loop-Break Decision Feedback Equalizer for DAC/ADC-DSP-Based Wireline Transceivers

    by Donggeon Kim, Yujin Choi, Jaewon Lee, Seoyoung Jang, Sungyu Song, Matthias Braendli, Thomas Morf, Marcel Kossel, Pier-Andrea Francese, Gain Kim

    This paper presents a novel digital decision feedback equalizer (DFE) design that can relax the feedback timing constraints for analog-to-digital converter (ADC)-based high-speed wireline receivers. The proposed technique breaks the loop-unrolled DFE (LU-DFE) chain by computing multiple LU-DFE chains in parallel with all possible seed symbols, and selecting the appropriate output by the post-processing selection logic. The proposed loop-break DFE (LB-DFE) is functionally equivalent to the conventional DFE with any other implementation techniques such as LU-DFE, look-ahead DFE (LA-DFE), or direct DFE. With topographical synthesis in 28nm CMOS process, the proposed LB-DFE achieved up to 54% of DFE area saving as compared to LA-DFE with look-ahead factor (LF) of 16 for 112Gb/s PAM-4 with 875MHz DSP clock speed. The implementation feasibility and functionality are verified using ZCU111 RFSoC platform at 6Gb/s (3GS/s ADC conversion rate) with a channel exhibiting 25dB loss at 1.5GHz, demonstrating the same bit error rate (BER) performance between the LB-DFE and the LA-DFE. Equipment-based measurements using arbitrary waveform generator (AWG) and real-time oscilloscope transmitting/receiving 40GBaud PAM-4 (80Gb/s) to/from the differential cables with software 21-tap feed-forward equalizer (FFE) and LB-DFE on PC was also conducted.


  • A 2-Lane Discrete Multitone Wireline Receiver Datapath With Far-End Crosstalk Cancellation on RFSoC Platform

    by Jaewon Lee, Seoyoung Jang, Matthias Braendli, Thomas Morf, Marcel Kossel, Pier-Andrea Francese, Gain Kim

    This brief presents a 2-lane discrete multitone (DMT) wireline receiver (RX) with a far-end crosstalk (FEXT) cancellation and its implementation on the ZCU111 RFSoC evaluation board for real-time functional verification. The RX datapath is implemented with the 64-parallel 128-tap multi-path delay-feedback (MDF) fast Fourier transform (FFT) to optimize resources and throughput. The multiple-input, multiple-output (MIMO) frequency-domain equalizer (FDE) compensates both channel insertion loss (IL) and FEXT based on coefficients computed from an on-chip pilot-assist channel estimation (CHEST). The platform includes a programmable logic (PL) for a DMT digital signal processor (DSP) running at 32 MHz, 2.048 GS/s data converters, and intersymbol interference (ISI)/FEXT board. This system enables the reflection of a realistic hardware impairment and real-time transceiver (TRX) operation with a quick bit error rate (BER) test. The measurement demonstrates that the MIMO DMT significantly improves a BER from 1.0E-2 to 5.8E-7 when the FEXT is canceled for a channel exhibiting 15 dB of IL and 10 dB of IL-to-crosstalk ratio (ICR) at Nyquist frequency.


  • A DAC/ADC-Based Wireline Transceiver Datapath Functional Verification on RFSoC Platform

    by Jaewon Lee, Seoyoung Jang, Yujin Choi, Donggeon Kim, Serdar Yonar, Matthias Braendli, Andrea Ruffino, Thomas Morf, Marcel Kossel, Pier-Andrea Francese, et al.

    This brief presents an RFSoC-based functional verification platform for a 2-lane pulse amplitude modulation (PAM) transceiver (TRX) datapath supporting 4-level PAM (PAM-4) and 8-level PAM (PAM-8). Digital-to-analog converters (DACs) and analog-to-digital converters (ADCs) existing on the ZU28DR RFSoC are used as digital front-ends of the transmitter (TX) and the receiver (RX), respectively. All digital equalization circuits and adaptation engines required for the modern >112 Gb/s DAC/ADC-DSP-based TRX datapath (excluding clock recovery) are implemented on the programmable logic (PL) running at 50 MHz, enabling real-time functional verification of the DAC/ADC-DSP-based serializer-deserializer (SerDes) operation. The register-transfer-level (RTL) design of the DSP can be directly used for the TRX silicon tape-out once the design is verified with the proposed RFSoC-based platform. The proposed system demonstrates a complete real-time functional verification of the TRX datapath, including the bit-error-rate (BER) test with the BER lower than 10-9 at 6.4 Gb/s and 9.6 Gb/s for PAM-4/8 symbols, respectively, with a channel loss of 18 dB at 1.6 GHz.


  • Open Access

    Design of synchronous frequency dividers in 5‐nm FinFET CMOS technology

    by Marcel Kossel, Pier Andrea Francese, Matthias Brändli, Andrea Ruffino, Thomas Morf

    A method is presented for the design of high‐speed frequency dividers in which the divided output signals are phase aligned by means of a scheme based on cascaded retiming. The objective of the design method proposed is to break the accumulation of propagation delay occurring in a divider chain that may limit the speed of the phase synchronization. Compared to alternative approaches where the phase synchronization is achieved with additional logical gates applied to the divider outputs, the authors’ approach only uses latches that are identical to those already employed in the divider chain itself without any additional synchronization logic. Hence, a better uniformity and homogeneity of the layout can be achieved, which helps improve the phase balancing. The method proposed to design synchronous dividers has been implemented in 5‐nm FinFET CMOS technology by means of a synchronous 8b‐counter providing the division factors 1/2 through 1/256. Its output phase synchronization has been verified in measurements at 10 GHz. The measured power consumption is 720 μW and the silicon area of the divider implemented is 79 μm 2 .