JIJustin Ivancic

Justin Ivancic

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Justin Ivancic has a total of 4 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Directional Multi-Resonant Micro-Electromechanical System Acoustic Sensor for Low Frequency Detection

    by Justin Ivancic, Fabio Alves

    This paper reports on the design, modeling, and characterization of a multi-resonant, directional, MEMS acoustic sensor. The design builds on previous resonant MEMS sensor designs to broaden the sensor’s usable bandwidth while maintaining a high signal-to-noise ratio (SNR). These improvements make the sensor more attractive for detecting and tracking sound sources with acoustic signatures that are broader than discrete tones. In-air sensor characterization was conducted in an anechoic chamber. The sensor was characterized underwater in a semi-anechoic pool and in a standing wave tube. The sensor demonstrated a cosine-like directionality, a maximum acoustic sensitivity of 47.6 V/Pa, and a maximum SNR of 88.6 dB, for 1 Pa sound pressure, over the bandwidth of the sensor circuitry (100 Hz–3 kHz). The presented design represents a significant improvement in sensor performance compared to similar resonant MEMS sensor designs. Increasing the sensitivity of a single-resonator design is typically associated with a decrease in bandwidth. This multi-resonant design overcomes that limitation.


  • Open Access

    Directional Resonant MEMS Acoustic Sensor and Associated Acoustic Vector Sensor

    by Justin Ivancic, Gamani Karunasiri, Fabio Alves

    This paper reports on the design, modeling, analysis, and evaluation of a micro-electromechanical systems acoustic sensor and the novel design of an acoustic vector sensor array (AVS) which utilized this acoustic sensor. This research builds upon previous work conducted to develop a small, lightweight, portable system for the detection and location of quiet or distant acoustic sources of interest. This study also reports on the underwater operation of this sensor and AVS. Studies were conducted in the lab and in the field utilizing multiple acoustic sources (e.g., generated tones, gun shots, drones). The sensor operates at resonance, providing for high acoustic sensitivity and a high signal-to-noise ratio (SNR). The sensor demonstrated a maximum SNR of 88 dB with an associated sensitivity of −84.6 dB re 1 V/μPa (59 V/Pa). The sensor design can be adjusted to set a specified resonant frequency to align with a known acoustic signature of interest. The AVS demonstrated an unambiguous, 360-degree, in-plane, azimuthal coverage and was able to provide an acoustic direction of arrival to an average error of within 3.5° during field experiments. The results of this research demonstrate the potential usefulness of this sensor and AVS design for specific applications.


  • Direction of Arrival Algorithm for Acoustic Sensors Operating Near Resonance

    by Peter Crooker, Ionatan Soule, Justin Ivancic, Gamani Karunasiri, Fabio Alves

    Recently it has been possible to detect sound direction using phase-sensitive sensors placed much closer to each other than the sound wavelength. A typical setup combines two phase-sensitive sensors placed perpendicular to each other with a third omnidirectional sensor, the latter to determine the bearing quadrant. So far, algorithms that extract the sound direction from the sensor voltages have only been applicable to sensors with identical frequency responses. However, we have developed MEMS sensors with simple harmonic oscillator-like resonance behavior for which these algorithms no longer apply. The operation near resonance greatly increases their performance, but the frequency dependences of any two sensors are different from each other and from the omnidirectional sensor. In this letter, we show how to accommodate these differences, first, by forcing the two sensor peaks to conform to each other in both magnitude and phase, and second, by adjusting the phase of the omnidirectional sensor to approximately match the phases of the resonant sensors near their resonant frequencies. We then present two algorithms to extract the sound direction. We lay out the theoretical basis for our algorithms and present measurements of acoustic noise to show the algorithms' effectiveness.