KZKunlun Zhang

Kunlun Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kunlun Zhang has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Calculation of Nonsinusoidal Power Supply for Toroidal-Winding Linear Induction Motor Considering Core Saturation Under Typical Air-Gap Flux Density

    by Huixian Zhang, Kunlun Zhang, Heng Ma

    The electromotive force (EMF) and thrust density of the toroidal-winding linear induction motor (TWLIM) depend on the reasonable construction of the air-gap flux density, and the core saturation makes the TWLIM nonlinear seriously leading to the difficulty of calculating the supply voltage accurately. For this reason, an analytical method (AM) of calculating the nonsinusoidal power supply of the TWLIM considering core saturation under typical air-gap flux density is proposed. First, the maximum magnetic circuit model considering core saturation is established according to Ampere’s loop theorem, and the total magnetic voltage drop (MVD) of the maximum magnetic circuit is obtained by calculating the air-gap reluctance and core reluctance. Second, the secondary current density is derived from Maxwell’s equations and integrated to obtain the sum of secondary currents. Then, the sum of primary currents is derived from the maximum magnetic circuit equation, and the amplitude and phase of the fundamental and each harmonic are obtained by fast Fourier transform (FFT). Finally, the primary circuit is established, and the primary voltage is calculated from current and EMF of the primary. The proposed AM is validated through finite element analysis (FEA) and experiment. Based on the FEA and experimental results, the accuracy of the AM is verified.

  • Analytical Methods for Estimating the Equivalent Stray Capacitance of Single-Layer Core Windings

    by Da Liang, Kunlun Zhang, Song Xiao, Ying Wang, Huixian Zhang, Cheng Luo, Kaifeng Zhu

    The analytical methods for estimating the equivalent stray capacitance (ESC) in a single-layer iron core winding include the capacitance network method (CNM) and the energy equivalence method (EEM). The CNM is limited to applications in symmetrical windings, and the EEM is restricted to use in multiconductor systems (MCSs) with fully known potential distributions. These methods are improved in this paper. The winding symmetry limitation of the CNM is eliminated, and the EEM is used to calculate the ESC of MCSs containing floating potential conductors. ESC calculations are found to differ between the CNM and the EEM. The accuracies of the hypotheses used in the CNM and the EEM and the ESCs calculated with each approach are assessed and compared based on finite element simulations, circuit simulations and experiments. The results show that at the first resonant frequency condition, the EEM hypothesis is more consistent with reality than that of the CNM, and the ESC calculated with the EEM is more accurate. The ESC errors incurred when using the CNM and the EEM are mainly due to model errors introduced by the discrepancies between the assumptions and the actual conditions.


  • Improved SEM Current Ringing Suppressor for Maglev Trains

    by Da Liang, Song Xiao, Kunlun Zhang, Ying Wang, Huixian Zhang

    In electromagnetic suspension (EMS) systems, the air gap between the suspension electromagnet (SEM) and steel track is adjusted by changing the electromagnetic attraction force, which is accomplished by controlling the maglev chopper (MC). When switching the power electronic devices of the MC, SEM current ringing tends to occur, which is harmful to the whole EMS system. A conventional current ringing suppressor (CRS) deteriorates the SEM port voltage ringing, which may accelerate the aging process of SEM insulation or even directly result in a breakdown fault. Herein, to explore the generation mechanism of SEM current ringing, a third-order equivalent circuit model of the suspension electromagnet-maglev chopper (SEM-MC) system is established by using the field-circuit coupling analysis technique. A series of simulations and experiments have been undertaken to verify the validity of the built circuit model, and the deviation between the simulation and experimental results is acceptable. As the influencing factors of SEM current ringing are analyzed based on this third-order equivalent circuit model, an improved CRS, i.e., hybrid inductor-resistor CRS, is proposed to avoid deteriorating the SEM port voltage ringing and protect the SEM insulation. Finally, the feasibility of the proposed hybrid inductor-resistor CRS is verified by corresponding experiments.


  • Open Access

    A Novel Analytic Method to Calculate the Equivalent Stray Capacitance of the Low-Speed Maglev Train’s Suspension Electromagnet

    by Da Liang, Kunlun Zhang, Qilong Jiang, Ying Wang

    The suspension electromagnet (SEM) is one of the most critical components of the low-speed maglev train to achieve the stable suspension and non-contact operation with the track. Therefore, it is valuable for optimizing the maglev system to study the characteristics of the SEM. This paper proposes a novel analytic method to calculate the equivalent stray capacitance of the SEM efficiently. It considers the capacitances inside the winding (turn to turn and layer to layer) and between the winding and core. Firstly, utilizing the compensation analytic method (CAM) calculates the static capacitances to reduce the calculation error, and the results of the CAM have significant improvement comparing with that of the traditional analytic method (TAM). Secondly, the analytical formula of the core floating potential is derived based on the partial capacitance theory, which has a 2.1% relative error to the finite element method (FEM). Finally, the experiment results of the SEM of a test rig prove the accuracy and efficiency of the proposed method.


  • The Effects of Maglev Chopper's Control Cycle on Suspension Performance in EMS System

    by Da Liang, Kunlun Zhang, Qilong Jiang, Hongyun He

    The cascade control strategy of current inner loop and airgap outer loop is usually adopted in electromagnetic suspension (EMS) system. The current loop and airgap loop adopt different control cycles in controller design, and the current loop control cycle is required to be shorter than the airgap loop control cycle. In theory, the shorter the control cycle of the inner loop, the better the following effect of the chopper current, and the more beneficial to the suspension system. However, it also needs the higher controller performance and control algorithm efficiency. With the suspension control performance permitted, reducing the current loop control frequency can effectively reduce the requirements of the controller performance and expand the selection range of the controller. In order to determine the appropriate control period of the current loop in the digital suspension system, the mathematical model of the suspension system and the maglev chopper is established, then the quantitative relationship between the current loop control period and the coil current ripple is deduced. Based on Simulink, the coupling simulation model of the maglev chopper and the suspension system is established, where the influence of the chopper control period on the performance of the suspension system is simulated and analyzed.


  • EMS maglev vehicles model reference adaptive control

    by Li Songqi, Zhang Kunlun, Liu Guoqing, Guo Wei

    Elastic deformation of the track effects on EMS maglev vehicles safety and comfort, brought challenges to the design of the suspension control system. In order to solve this problem, a nonlinear dynamic model of single magnet EMS maglev vehicles is built, discussed the model reference adaptive control method in the application of maglev vehicles suspension control; designed the controller based on Lyapunov stability theory. A numerical simulation is performed with MATLAB, and the effectiveness of the control method was verified.