YSYingying Sun

Yingying Sun

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Yingying Sun has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Molecular Insight into the Effect of CO2 on Water-Polar Component Interface: Implication for CO2 EOR

    by Guoqiang Sang, Songqi Li, Hengfei Yin, Haowei Chen, Ninghong Jia, Ming Gao, Shanyan Zhang, Yingying Sun, Chuanfeng Zhao, Dehao Zhang

    Enhanced Oil Recovery (EOR) techniques, particularly CO2 injection, have garnered significant attention due to their potential to improve oil extraction efficiency while concurrently sequestering CO2. The impact of carbon dioxide on the properties of the hydrocarbon-water interface is currently not well established. The influence of CO2 on the interfacial characteristics of crude oil-water systems was examined using molecular dynamics (MD) simulations. Eight distinct interface models, varying in the ratio of polar to non-polar crude oil components, were constructed. The effect of CO2 was characterized by calculating IFT, molecular conformation and orientation, and oil-water-CO2 interaction energies. This study reveals three key findings: 1) As the concentration of CO2 increases, the IFT between polar and non-polar crude oils diminishes and ultimately plateaus. 2) Non-polar crude oil molecules exhibit ordered inter facial arrangements, while polar molecules are randomly distributed. Specifically, CO2 promotes perpendicular orientation of linear non-polar molecules and parallel alignment of cyclic non-polar molecules at the interface; 3) CO2 strengthens interactions between non-polar crude oil molecules, while initially weakening and then stabilizing interactions between polar molecules. These results provide crucial insights into hydrocarbon-water-CO2 IFT behavior and offer a theoretical basis for optimizing related industrial processes.

  • Open Access

    Front Movement and Sweeping Rules of CO2 Flooding under Different Oil Displacement Patterns

    by Xiang Qi, Tiyao Zhou, Weifeng Lyu, Dongbo He, Yingying Sun, Meng Du, Mingyuan Wang, Zheng Li

    CO2 flooding is a pivotal technique for significantly enhancing oil recovery in low-permeability reservoirs. The movement and sweeping rules at the front of CO2 flooding play a critical role in oil recovery; yet, a comprehensive quantitative analysis remains an area in need of refinement. In this study, we developed 1-D and 2-D numerical simulation models to explore the sweeping behavior of miscible, immiscible, and partly miscible CO2 flooding patterns. The front position and movement rules of the three CO2 flooding patterns were determined. A novel approach to the contour area calculation method was introduced to quantitatively characterize the sweep coefficients, and the sweeping rules are discussed regarding the geological parameters, oil viscosity, and injection–production parameters. Furthermore, the Random Forest (RF) algorithm was employed to identify the controlling factor of the sweep coefficient, as determined through the use of out-of-bag (OOB) data permutation analysis. The results showed that the miscible front was located at the point of maximum CO2 content in the oil phase. The immiscible front occurred at the point of maximum interfacial tension near the production well. Remarkably, the immiscible front moved at a faster rate compared with the miscible front. Geological parameters, including porosity, permeability, and reservoir thickness, significantly impacted the gravity segregation effect, thereby influencing the CO2 sweep coefficient. Immiscible flooding exhibited the highest degree of gravity segregation, with a maximum gravity segregation degree (GSD) reaching 78.1. The permeability ratio was a crucial factor, with a lower limit of approximately 5.0 for reservoirs suitable for CO2 flooding. Injection–production parameters also played a pivotal role in terms of the sweep coefficient. Decreased well spacing and increased gas injection rates were found to enhance sweep coefficients by suppressing gravity segregation. Additionally, higher gas injection rates could improve the miscibility degree of partly miscible flooding from 0.69 to 1.0. Oil viscosity proved to be a significant factor influencing the sweep coefficients, with high seepage resistance due to increasing oil viscosity dominating the miscible and partly miscible flooding patterns. Conversely, gravity segregation primarily governed the sweep coefficient in immiscible flooding. In terms of controlling factors, the permeability ratio emerged as a paramount influence, with a factor importance value (FI) reaching 1.04. The findings of this study can help for a better understanding of sweeping rules of CO2 flooding and providing valuable insights for optimizing oil recovery strategies in the field applications of CO2 flooding.


  • Open Access

    Molecular Dynamics Simulation of CO2 Storage in Reservoir Pores with a Dead-End

    by Zeming Ji, Chang He, Yingying Sun, Xiaokun Yue, Hongxu Fang, Xiaoqing Lu, Siyuan Liu, Weifeng Lyu

    The carbon capture, utilization and storage (CCUS) technique is widely applied in order to solve energy shortages and global warming, in which CO2 storage plays an important part. Herein, the CO2 storage in reservoir pores with a dead-end is investigated using a molecular dynamics simulation. The results indicate that, when a CO2 molecule flows through a reservoir pore towards its dead-end, it is readily captured inside said dead-end. When the pressure difference of the CO2 injection increases, the transport speed of the CO2 becomes faster, and the storage efficiency increases. The rate constants for the absorption of the carbon dioxide at 5 MPa, 10 MPa, and 15 MPa are 0.47 m/s, 2.1 m/s, and 3.1 m/s. With the same main channel, a narrower dead-end with less oil molecules would cause a smaller spatial potential resistance, which would lead to a faster CO2 replacement and storage process. The 3 nm main channel with a 1.5 nm dead-end model had the highest absorption rate of 5.3 m/s out of the three sets of models with different dead-ends. When the dead-end’s width was constant, the rate constants for the absorption of carbon dioxide in the 6 nm main channel with a 1.5 nm dead-end model was 1.8 m/s, which was higher than that of the 3 nm–1.5 nm model. This study investigates the mechanism of CO2 storage in reservoir pores with a dead-end at the molecular level and provides a scientific basis for the practical application of CO2 storage.


  • Open Access

    Front Movement and Sweeping Rules of CO2 Flooding under Different Oil Displacement Patterns

    by Xiang Qi, Tiyao Zhou, Weifeng Lyu, Dongbo He, Yingying Sun, Meng Du, Mingyuan Wang, Zheng Li

    CO2 flooding stands as a pivotal technique for significantly enhancing oil recovery in low-permeability reservoirs. The movement and sweeping rules at the front of CO2 flooding play a critical role in its oil recovery, yet a comprehensive quantitative analysis remains an area in need of refinement. In this study, we have developed 1D and 2D numerical simulation models to explore the sweeping behavior of miscible, immiscible, and partly-miscible CO2 flooding patterns. The front position and movement rules of the three CO2 flooding patterns are determined. A novel approach of the contour area calculation method is introduced to quantitatively characterize the sweep coefficients, and the sweeping rules are discussed regarding geological parameters, oil viscosity, and injection-production parameters. Furthermore, the Random Forest (RF) algorithm is employed to identify the controlling factor of the sweep coefficient, as determined by out-of-bag (OOB) data displacement analysis. The results show that the miscible front is located at the point of maximum CO2 content in the oil phase. The immiscible front occurs at the point of maximum interfacial tension near the production well. Remarkably, the immiscible front moves at a faster rate compared to the miscible front. Geological parameters, including porosity, permeability, and reservoir thickness, significantly impact the gravity segregation effect, thereby influencing the CO2 sweep coefficient. Immiscible flooding exhibits the highest degree of gravity segregation, with a maximum gravity segregation degree (GSD) reaching 78.1. The permeability ratio is a crucial factor, with a lower limit of approximately 5.0 for reservoirs suitable for CO2 flooding. Injection-production parameters also play a pivotal role in sweep coefficient. Decreased well spacing and increased gas injection rates are found to enhance sweep coefficients by suppressing gravity segregation. Additionally, higher gas injection rates can improve the miscibility degree of partly-miscible flooding from 0.69 to 1.0. Oil viscosity proves to be a significant factor influencing the sweep coefficients, with high seepage resistance due to increasing oil viscosity dominating the miscible and partly-miscible flooding patterns. Conversely, gravity segregation primarily governs the sweep coefficient in immiscible flooding. In terms of controlling factors, the permeability ratio emerges as a paramount influence, with a factor importance value (FI) reaching 1.04. these results provide a theoretical foundation for the application of CO2 flooding, enhancing the understanding of the critical factors governing its success.


  • Open Access

    A Design and Optimization Method of Performing Layer Combinations in Separate-Layer CO2 Flooding to Improve Oil Recovery

    by Zheng Li, Tiyao Zhou, Hengfei Yin, Yingying Sun

    Separate-layer CO2 flooding has increasingly been used to improve the overall development of multi-layer heterogeneous reservoirs. Due to their field technical limitations, layer combinations have to be carried out to reduce the number of layer-groups required for the separate injection of CO2. Currently there are few studies of the method of designing layer combinations. In field practice, the layer combinations are often made based on the permeability ratio of the layers to be developed, but it is not possible to accurately obtain the optimal scheme in many cases. Therefore, in this paper, a new design and optimization method based on the weighted standard deviation of permeability is proposed, which comprehensively considers the effects of multiple geological and fluid properties in different layers. The new method is applied to study the layer combination schemes in separate-layer CO2 flooding in H block, Daqingzijing Oilfield, Jilin, China. The prioritization of all of the schemes is obtained via the method, and a related numerical model is also established to perform verification and quantitative analysis. The results show that designing layer combinations using the new proposed method can achieve better development effect than using the conventional permeability ratio based method. It can achieve a more uniform interlayer CO2 displacement with an obvious improvement in the CO2 swept volume in low permeability layers and a higher overall oil recovery. According to the numerical simulation results, using the optimal layer combination scheme designed via the new proposed method, the ten-year swept volume of CO2 in the low permeability layer can be increased by 16.2%, and the ten-year overall oil recovery efficiency can be increased by 3.3%, with both measures showing a remarkable improvement. The work can provide a significant reference point for the field design of layer combinations in separate-layer CO2 flooding.


  • Open Access

    Calculation Plate Used to value CCUS-EOR Potential in the Oil-Water Transition Zone

    by Yingying Sun, Ming Gao, Yuchen Qian, Tiyao Zhou, Hengfei Yin, Zheng Li, Xiang Qi

    Due to its economic benefits and the ability to reduce carbon emissions on a large scale, the CCUS-EOR project has been widely promoted and implemented globally. By using carbon dioxide flooding, oil water transition zone reservoirs that were once considered worthless may have new potential for development because of its rich geological reserves and high quality carbon sequestration conditions. Unlike water flooded layer, the oil in the TZ is unsaturated rather than residual oil after water flooding, which would lead to special oil-water seepage law of initial oil saturation. It is necessary to clarify special oil-water seepage law of oil-water transition zone to evaluate its production & storage potential. In this paper, we present a series of experiments to characterize the relationship between residual oil saturation and initial oil saturation. Cores in four different permeability and oil in four different viscosity are used to simulate different reservoir conditions, and that CO2 immiscible flooding experiments for each cores permeability and oil viscosity are performed with four different initial oil saturation. A total of 36 sets of CO2 flooding experiment data are used to draw the initial oil saturation & residual oil saturation chart. The results show that the residual oil saturation depends on the initial oil saturation rather than constant under certain conditions of core and oil. Under the condition of low permeability and high oil viscosity, the influence of initial oil saturation on residual oil saturation is relatively strong. The initial oil saturation & residual oil saturation chart can accurately calculate the residual oil saturation, initial water cut and final recovery based on the core permeability, oil viscosity and the initial oil saturation which is the first time to put forward this kind of chart and of the great significance to evaluate the recovery potential of the TZ.

  • Open Access

    Laboratory simulation and CO2 flooding efficiency of oil-water transition zones in a low permeability reservoir in the Jilin Oilfield

    by Ying-Ying Sun, Shan-Yan Zhang, Zhao-Peng Yang, Guo-Qiang Sang, Tong Li, Yang-Cheng Li