Arash Imanlou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Arash Imanlou has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Gevork Babamalek Gharehpetian
Amirkabir University of Technology
3 shared publications - Reza Behkam
Department of Electrical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran
3 shared publications - Ebrahim Babaei
Faculty of Electrical and Computer Engineering, University of Tabriz, Tabriz, Iran
2 shared publications Ali Nadermohammadi
Faculty of Electrical and Computer Engineering, University of Tabriz, Tabriz, Iran
1 shared publicationEbrahim Seifi Najmi
Roshdieh Higher Institute of Education, Tabriz, Iran
1 shared publication- Frede Blaabjerg
Aalborg University
1 shared publication
Latest Publications
- 23 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (4) , 5554-5565
A New High Voltage Gain Transformerless Dual- Duty-Triple-Mode DC–DC Converter With Reduced Voltage Stress Across Components
This article proposes a new high step-up nonisolated transformerless dc–dc converter topology for dc microgrid applications. By effectively incorporating a modified active switched-inductor network with a new configured switched capacitor network, the proposed design achieves an exceptionally high voltage gain while significantly reducing the voltage stress across the components. A notable feature of the proposed dual-duty-triple-mode (DDTM) converter is its flexibility in achieving a high voltage gain through various combinations of duty cycles. Furthermore, the converter's triple-mode operation reduces turn-off switching losses in the input switches and activates the output switch under zero-voltage switching conditions, thereby increasing overall efficiency. Moreover, the second duty cycle introduces an additional degree of freedom to the design process. The operation principles, steady-state analysis, design considerations, efficiency calculations, and small-signal modeling with controller design are provided. To demonstrate the superiority of the proposed converter, a comparative analysis is conducted with other recently published relevant and DDTM converters, illustrating that the proposed converter offers significantly higher voltage gain, considerably lower voltage stress across components, higher efficiency, and lower cost. Ultimately, to validate the proposed design, a 500 W lab-based prototype (20 to 400 V) is constructed and subjected to thorough evaluation.
- 23 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (4) , 5554-5565
A New High Voltage Gain Transformerless Dual- Duty-Triple-Mode DC–DC Converter With Reduced Voltage Stress Across Components
This article proposes a new high step-up nonisolated transformerless dc–dc converter topology for dc microgrid applications. By effectively incorporating a modified active switched-inductor network with a new configured switched capacitor network, the proposed design achieves an exceptionally high voltage gain while significantly reducing the voltage stress across the components. A notable feature of the proposed dual-duty-triple-mode (DDTM) converter is its flexibility in achieving a high voltage gain through various combinations of duty cycles. Furthermore, the converter's triple-mode operation reduces turn-off switching losses in the input switches and activates the output switch under zero-voltage switching conditions, thereby increasing overall efficiency. Moreover, the second duty cycle introduces an additional degree of freedom to the design process. The operation principles, steady-state analysis, design considerations, efficiency calculations, and small-signal modeling with controller design are provided. To demonstrate the superiority of the proposed converter, a comparative analysis is conducted with other recently published relevant and DDTM converters, illustrating that the proposed converter offers significantly higher voltage gain, considerably lower voltage stress across components, higher efficiency, and lower cost. Ultimately, to validate the proposed design, a 500 W lab-based prototype (20 to 400 V) is constructed and subjected to thorough evaluation.
- 8 December 2024
- Published by Wiley in International Journal of Circuit Theory and Applications
A New High Voltage Gain Common‐Ground Step‐Up DC‐DC Converter Integrating Coupled‐Inductors and Switched‐Capacitors
This study proposes a new high‐voltage gain quadratic‐structured common‐ground step‐up DC‐DC converter, integrating coupled‐inductors and switched‐capacitors. This configuration achieves a significant voltage gain without necessitating either a substantial duty cycle or an elevated turn ratio in the coupled‐inductors. A critical innovation is the embedding of the secondary windings of the coupled‐inductors into the switched‐capacitor cell, which not only enhances voltage gain but also effectively suppresses the inrush current typical in such cells. The converter's features include the successful recycling of energy from the leakage inductors; low voltage stress exerted on power switches; zero‐current switching (ZCS) turn‐on of the main switch; ZCS conditions for the diodes' turn‐off; reduced switching losses because of the application of a quasi‐resonant (QR) operation between the leakage inductors and middle capacitors; simultaneous operation of the power switches; continuous input current; a wide duty cycle range; and a common‐ground output–input connection. The operating principle, steady‐state analysis (CCM and DCM), design considerations, efficiency calculation, small‐signal modeling with controller design, and comparisons with other related converters are provided. Finally, experimental results from a 100‐ to 300‐W prototype with 20‐ to 30‐V input and 400‐V output are given to validate the proposed converter's theoretical analysis and feasibility.
- 8 December 2024
- Published by Wiley in International Journal of Circuit Theory and Applications
A New High Voltage Gain Common‐Ground Step‐Up DC‐DC Converter Integrating Coupled‐Inductors and Switched‐Capacitors
This study proposes a new high‐voltage gain quadratic‐structured common‐ground step‐up DC‐DC converter, integrating coupled‐inductors and switched‐capacitors. This configuration achieves a significant voltage gain without necessitating either a substantial duty cycle or an elevated turn ratio in the coupled‐inductors. A critical innovation is the embedding of the secondary windings of the coupled‐inductors into the switched‐capacitor cell, which not only enhances voltage gain but also effectively suppresses the inrush current typical in such cells. The converter's features include the successful recycling of energy from the leakage inductors; low voltage stress exerted on power switches; zero‐current switching (ZCS) turn‐on of the main switch; ZCS conditions for the diodes' turn‐off; reduced switching losses because of the application of a quasi‐resonant (QR) operation between the leakage inductors and middle capacitors; simultaneous operation of the power switches; continuous input current; a wide duty cycle range; and a common‐ground output–input connection. The operating principle, steady‐state analysis (CCM and DCM), design considerations, efficiency calculation, small‐signal modeling with controller design, and comparisons with other related converters are provided. Finally, experimental results from a 100‐ to 300‐W prototype with 20‐ to 30‐V input and 400‐V output are given to validate the proposed converter's theoretical analysis and feasibility.
- Open Access
- 9 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 103388-103404
A New High Voltage Gain Transformer-Less Step-Up DC–DC Converter With Double Duty-Cycles: Design and Analysis
This paper proposes a new high gain step-up non-isolated transformer-less DC-DC converter, achieved through the effective integration of an active switched-inductor network with switched-capacitors. A substantially high voltage gain is achieved considering the quantity of components employed in its structure. Benefiting from double duty cycles, a notable attribute of the propounded circuit is its capability to obtain a consistent voltage gain through diverse duty cycle configurations. The second duty cycle introduces an additional degree of freedom to both the design procedure and the converter control system design. The pole placement control method is employed to regulate the converter, controlling both duty cycles simultaneously. The attainment of a high voltage gain, such as a gain of 20, is feasible through the use of low duty cycle values ( D 1 =50% and D 2 =35%). Also, the power switches are subject to less voltage stresses ( V S1 = V S2 =0.26 Vout and V S3 =0.48 Vout ), enabling the implementation of low voltage rating MOSFETs with low on-resistance, resulting in improved efficiency. Moreover, the output switch under zero-voltage switching (ZVS) conditions and low turn-off switching losses of the input switches lead to an increased efficiency. Omitting the use of a transformer or coupled-inductors in this design reduces the converter size and weight, eliminates the challenges of leakage inductors, and also simplifies analysis, design, and fabrication procedure. The operation principles, steady-state analysis, design considerations, and efficiency calculations are provided in detail, followed by dynamic modeling and control analysis. To assess the merits of the propounded converter, a comparison study is conducted against those of other relevant converters. Ultimately, for the purpose of validating the suggested design, the converter simulation model in PSIM software is tested, and a 300W laboratory prototype is fabricated and evaluated.
- 9 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 103388-103404
Open AccessA New High Voltage Gain Transformer-Less Step-Up DC–DC Converter With Double Duty-Cycles: Design and Analysis
This paper proposes a new high gain step-up non-isolated transformer-less DC-DC converter, achieved through the effective integration of an active switched-inductor network with switched-capacitors. A substantially high voltage gain is achieved considering the quantity of components employed in its structure. Benefiting from double duty cycles, a notable attribute of the propounded circuit is its capability to obtain a consistent voltage gain through diverse duty cycle configurations. The second duty cycle introduces an additional degree of freedom to both the design procedure and the converter control system design. The pole placement control method is employed to regulate the converter, controlling both duty cycles simultaneously. The attainment of a high voltage gain, such as a gain of 20, is feasible through the use of low duty cycle values ( D 1 =50% and D 2 =35%). Also, the power switches are subject to less voltage stresses ( V S1 = V S2 =0.26 Vout and V S3 =0.48 Vout ), enabling the implementation of low voltage rating MOSFETs with low on-resistance, resulting in improved efficiency. Moreover, the output switch under zero-voltage switching (ZVS) conditions and low turn-off switching losses of the input switches lead to an increased efficiency. Omitting the use of a transformer or coupled-inductors in this design reduces the converter size and weight, eliminates the challenges of leakage inductors, and also simplifies analysis, design, and fabrication procedure. The operation principles, steady-state analysis, design considerations, and efficiency calculations are provided in detail, followed by dynamic modeling and control analysis. To assess the merits of the propounded converter, a comparison study is conducted against those of other relevant converters. Ultimately, for the purpose of validating the suggested design, the converter simulation model in PSIM software is tested, and a 300W laboratory prototype is fabricated and evaluated.
- Open Access
- 6 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 56749-56765
A New High Voltage Gain Active Switched-Inductor Based High Step-Up DC–DC Converter With Coupled-Inductor
This paper propounds a new high step-up DC-DC topology based on the active switched-inductor (A-SL) technique, which utilizes a coupled inductor (CI) for performance enhancement. Among the features of the presented topology are the following: (a) Better voltage gain (VG) and efficiency, (b) Since there are low voltages across power switches, it is possible to reduce the amount of power that is lost as a result of using MOSFETs with a low voltage rating and reduced internal resistance, (c) By reducing the turn ratio of the CI, the VG is enhanced, (d) Through the series connection of a capacitor with the CI primary winding, zero DC bias is achieved, and the core saturation problem is solved, (e) Input current division between input inductors and switches, (f) There is no limitation on duty cycle (0<D<1), and (g) Simple switching patterns and simultaneously driven switches. The propounded converter’s operation principle and steady-state analysis are explained in detail, and parasitic elements’ effects on VG and efficiency are examined. In addition, the VG, the number of components, and the voltage tension on power switches, diodes, and capacitors are compared and analyzed. An experimental laboratory prototype with 30V input and 400V output voltage is used to verify the validity of the study and the performance of the propounded topology.
- 6 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 56749-56765
Open AccessA New High Voltage Gain Active Switched-Inductor Based High Step-Up DC–DC Converter With Coupled-Inductor
This paper propounds a new high step-up DC-DC topology based on the active switched-inductor (A-SL) technique, which utilizes a coupled inductor (CI) for performance enhancement. Among the features of the presented topology are the following: (a) Better voltage gain (VG) and efficiency, (b) Since there are low voltages across power switches, it is possible to reduce the amount of power that is lost as a result of using MOSFETs with a low voltage rating and reduced internal resistance, (c) By reducing the turn ratio of the CI, the VG is enhanced, (d) Through the series connection of a capacitor with the CI primary winding, zero DC bias is achieved, and the core saturation problem is solved, (e) Input current division between input inductors and switches, (f) There is no limitation on duty cycle (0<D<1), and (g) Simple switching patterns and simultaneously driven switches. The propounded converter’s operation principle and steady-state analysis are explained in detail, and parasitic elements’ effects on VG and efficiency are examined. In addition, the VG, the number of components, and the voltage tension on power switches, diodes, and capacitors are compared and analyzed. An experimental laboratory prototype with 30V input and 400V output voltage is used to verify the validity of the study and the performance of the propounded topology.