Linxiu Dai
Research Subjects
Linxiu Dai has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Changhua An
Tianjin Key Laboratory of Organic Solar Cells and Photochemical Conversion, School of Chemistry and Chemical Engineering, Institute of New Energy Materials & Low-Carbon Technologies, Tianjin University of Technology, Tianjin 300384, China
5 shared publications - Shuang Yao
State Key Laboratory of Crystal Materials Institute for New Energy Materials and Low Carbon Technologies School of Materials Science & Engineering Tianjin University of Technology Tianjin P. R. China
2 shared publications - Yongli Shen
Institute for New Energy Materials and Low Carbon Technologies, School of Materials Science and Engineering
2 shared publications - Yuping Chen
Tianjin Key Laboratory of Organic Solar Cells and Photochemical Conversion, School of Chemistry and Chemical Engineering
2 shared publications Fan Yang
Tianjin Key Laboratory of Organic Solar Cell and Photochemical Conversion, School of Chemistry and Chemical Engineering, Life and Health Intelligent Research Institute, Tianjin University of Technology, Tianjin 300384, China
1 shared publication- Furong Zhao
Tianjin Key Laboratory of Organic Solar Cells and Photochemical Conversion, School of Chemistry and Chemical Engineering
1 shared publication
Latest Publications
- 24 April 2026
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 98 (18) , 13631-13637
Visualization of Gas Mass Transfer by Interferometric Microsphere Microscopy
In situ observation of the gas mass transfer process is crucial for the development of high-performance sensing and catalytic materials. However, visualizing gas distribution patterns at the micro/nano interface remains challenging due to the weak optical signal of gas molecules as well as the trade-off between high resolution and a large field of view (FOV). To overcome these limitations, we developed label-free interferometric microsphere microscopy (IMM), achieving a resolution of 50 nm within an FOV of 100 μm2. A 45 μm microsphere was selected for the large-scale imaging. To improve the resolution within this large FOV, multiwavelength gas images were obtained by using frequency shift technology and fused using an algorithm. The structure-performance relationship of colorimetric gas sensors was established by analyzing the gas dynamics. The critical transition from laminar to vortical flow at micro/nano interfaces occurs at a Knudsen number (Kn) of 0.01, which depends on the size of the micropores. Laminar flow was observed at Kn = 0.008 and a micropore size of 6.3 μm. As the Kn value increased to 0.01, the micropore size corresponding to this value decreased to 4.5 μm, resulting in the formation of a vortex gas diffusion regime and improving the sensor response by 70%. The IMM shows great promise for real-time gas dynamics detection and is a powerful tool for determining the quantitative relationship between the structure and performance of functional materials.
- 24 April 2026
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 98 (18) , 13631-13637
Visualization of Gas Mass Transfer by Interferometric Microsphere Microscopy
In situ observation of the gas mass transfer process is crucial for the development of high-performance sensing and catalytic materials. However, visualizing gas distribution patterns at the micro/nano interface remains challenging due to the weak optical signal of gas molecules as well as the trade-off between high resolution and a large field of view (FOV). To overcome these limitations, we developed label-free interferometric microsphere microscopy (IMM), achieving a resolution of 50 nm within an FOV of 100 μm2. A 45 μm microsphere was selected for the large-scale imaging. To improve the resolution within this large FOV, multiwavelength gas images were obtained by using frequency shift technology and fused using an algorithm. The structure-performance relationship of colorimetric gas sensors was established by analyzing the gas dynamics. The critical transition from laminar to vortical flow at micro/nano interfaces occurs at a Knudsen number (Kn) of 0.01, which depends on the size of the micropores. Laminar flow was observed at Kn = 0.008 and a micropore size of 6.3 μm. As the Kn value increased to 0.01, the micropore size corresponding to this value decreased to 4.5 μm, resulting in the formation of a vortex gas diffusion regime and improving the sensor response by 70%. The IMM shows great promise for real-time gas dynamics detection and is a powerful tool for determining the quantitative relationship between the structure and performance of functional materials.
- 6 April 2026
- Published by Elsevier in Analytica Chimica Acta
- Vol. 1406, 345488
Fe–Mo atomic-scale synergy enables trace detection and multidimensional fingerprinting of phenolic pollutants
- 6 April 2026
- Published by Elsevier in Analytica Chimica Acta
- Vol. 1406, 345488
Fe–Mo atomic-scale synergy enables trace detection and multidimensional fingerprinting of phenolic pollutants
- 13 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (33) , 16321-16327
Ultrasmall La2O3 Nanoparticles Supported on Cu2O/Copper Foam for CO2 Energization
- 13 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (33) , 16321-16327
Ultrasmall La2O3 Nanoparticles Supported on Cu2O/Copper Foam for CO2 Energization
- 27 September 2024
- Published by American Chemical Society (ACS) in ACS Materials Letters
- Vol. 6 (11) , 4865-4872
Facilitating Dissociation–Diffusion–Desorption Process over Ru Nanoclusters Engineering hcp-Ni3Fe for Hydrogen Evolution at High Current Densities
- 27 September 2024
- Published by American Chemical Society (ACS) in ACS Materials Letters
- Vol. 6 (11) , 4865-4872
Facilitating Dissociation–Diffusion–Desorption Process over Ru Nanoclusters Engineering hcp-Ni3Fe for Hydrogen Evolution at High Current Densities
- 12 January 2024
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 63 (4) , 2131-2137
Coordination Confined Thermolysis Synthesis of the Ni Single Atom Catalyst on the N-Doped Commercial Carbon for the Production of Syngas
The electrochemical conversion of CO2 into controllable syngas (CO/H2) over a wide potential range is challenging. The main electrocatalysts are based on the noble metals Au (Ag) or heavy metal Pb. The development of alternative nonprecious catalysts is of paramount importance for practice. In this work, a simple coordination confined thermal pyrolysis method has been developed for the synthesis of Ni single-atom catalyst loaded onto nitrogen-doped commercial carbon. The catalyst is in the form of NiN3-C, which exhibits a high-performance electrocatalytic reduction of CO2 toward producing syngas with Faraday efficiencies of 62.28% of CO and 36.7% of H2. The Gibbs free energies of COOH* and H* on the NiN3-C structure were estimated by using density functional theory (DFT). The formation of COOH* intermediate is the speed-limiting step in the process, with ΔG COOH* being 0.7 eV, while H* is the speed-limiting step in the hydrogen evolution, respectively. This work provides a feasible method for the achievement of nonprecious catalysts for the resourceful use of CO2.
- 12 January 2024
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 63 (4) , 2131-2137
Coordination Confined Thermolysis Synthesis of the Ni Single Atom Catalyst on the N-Doped Commercial Carbon for the Production of Syngas
The electrochemical conversion of CO2 into controllable syngas (CO/H2) over a wide potential range is challenging. The main electrocatalysts are based on the noble metals Au (Ag) or heavy metal Pb. The development of alternative nonprecious catalysts is of paramount importance for practice. In this work, a simple coordination confined thermal pyrolysis method has been developed for the synthesis of Ni single-atom catalyst loaded onto nitrogen-doped commercial carbon. The catalyst is in the form of NiN3-C, which exhibits a high-performance electrocatalytic reduction of CO2 toward producing syngas with Faraday efficiencies of 62.28% of CO and 36.7% of H2. The Gibbs free energies of COOH* and H* on the NiN3-C structure were estimated by using density functional theory (DFT). The formation of COOH* intermediate is the speed-limiting step in the process, with ΔG COOH* being 0.7 eV, while H* is the speed-limiting step in the hydrogen evolution, respectively. This work provides a feasible method for the achievement of nonprecious catalysts for the resourceful use of CO2.
- 1 June 2023
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 37 (12) , 8699-8706
Strong Electronic Metal–Support Interaction Augments Hydrogen Evolution over hcp-Ni/In2O3 with Ultrasound-Assisting Dehydrogenation of Ammonia Borane
- 1 June 2023
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 37 (12) , 8699-8706
Strong Electronic Metal–Support Interaction Augments Hydrogen Evolution over hcp-Ni/In2O3 with Ultrasound-Assisting Dehydrogenation of Ammonia Borane
- 18 June 2022
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 9 (16) , 4121-4126
In situ polymerization confinement synthesis of ultrasmall MoTe 2 nanoparticles for the electrochemical detection of dopamine
Ultrasmall MoTe 2 nanoparticles has been synthesized using an in situ polymerization confinement method, which exhibits a low limit of detection and excellent selectivity for electrochemical dopamine sensors.
- 18 June 2022
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 9 (16) , 4121-4126
In situ polymerization confinement synthesis of ultrasmall MoTe 2 nanoparticles for the electrochemical detection of dopamine
Ultrasmall MoTe 2 nanoparticles has been synthesized using an in situ polymerization confinement method, which exhibits a low limit of detection and excellent selectivity for electrochemical dopamine sensors.