Wenqiang Sun
Wenqiang Sun has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
Baoshun Wang
Zhejiang Jiuli Hitech Met Co Ltd, Huzhou 313028, Peoples R China
1 shared publication- Chen Su
R&D center, Zhejiang JIULI Hi-tech metals Co, Ltd, Huzhou, China
1 shared publication Dezhong Yan
1 shared publication- Huigai Li
Center for Advanced Solidification Technology, State Key Laboratory of Materials for Advanced Nuclear Energy, Shanghai University, Shanghai, China
1 shared publication Jianping Liang
1 shared publicationJiong Qian
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by National Library of Serbia in Journal of Mining and Metallurgy, Section B: Metallurgy
- Vol. 62 (00) , 6
Structure, mechanical properties, and corrosion resistance of low-nickel nitrogen-alloyed austenite stainless steel
This study investigates the structure, mechanical properties, and corrosion resistance of low-nickel nitrogen-alloyed austenitic stainless steels (Cr17Mn9Ni3N, 05Cr18Mn10Ni3N) as cost-effective alternatives to conventional AISI 304L and AISI 321 grades. The alloys were smelted in vacuum induction melting with nitrogen introduced via nitrided ferrochrome. Microstructural analysis confirmed fully austenitic structures with finer grain sizes (ASTM No. 4.5-6.0) compared to conventional steels (ASTM No. 3.5-4.0). Mechanical testing revealed superior yield strength (~414 MPa) and tensile strength (~730-748 MPa) in nitrogen-alloyed steels, attributed to solid-solution strengthening by nitrogen. However, the impact toughness at cryogenic temperatures (-196°C) was reduced, and brittle facets were found on the fracture surface. The results of potentiodynamic polarization tests showed that AISI 304L steel exhibited a higher pitting potential. The pitting potentials of steels Cr17Mn9Ni3N and 05Cr18Mn10Ni3N were lower than that of AISI 304L but higher than that of AISI 321 steel. Economic analysis highlighted significant cost savings potential through nickel substitution with nitrogen. The results validate nitrogen-alloyed steels as viable alternatives for applications requiring high strength and corrosion resistance, though cryogenic applications require careful nickel content optimization.
- 1 January 2026
- Published by National Library of Serbia in Journal of Mining and Metallurgy, Section B: Metallurgy
- Vol. 62 (00) , 6
Open AccessStructure, mechanical properties, and corrosion resistance of low-nickel nitrogen-alloyed austenite stainless steel
This study investigates the structure, mechanical properties, and corrosion resistance of low-nickel nitrogen-alloyed austenitic stainless steels (Cr17Mn9Ni3N, 05Cr18Mn10Ni3N) as cost-effective alternatives to conventional AISI 304L and AISI 321 grades. The alloys were smelted in vacuum induction melting with nitrogen introduced via nitrided ferrochrome. Microstructural analysis confirmed fully austenitic structures with finer grain sizes (ASTM No. 4.5-6.0) compared to conventional steels (ASTM No. 3.5-4.0). Mechanical testing revealed superior yield strength (~414 MPa) and tensile strength (~730-748 MPa) in nitrogen-alloyed steels, attributed to solid-solution strengthening by nitrogen. However, the impact toughness at cryogenic temperatures (-196°C) was reduced, and brittle facets were found on the fracture surface. The results of potentiodynamic polarization tests showed that AISI 304L steel exhibited a higher pitting potential. The pitting potentials of steels Cr17Mn9Ni3N and 05Cr18Mn10Ni3N were lower than that of AISI 304L but higher than that of AISI 321 steel. Economic analysis highlighted significant cost savings potential through nickel substitution with nitrogen. The results validate nitrogen-alloyed steels as viable alternatives for applications requiring high strength and corrosion resistance, though cryogenic applications require careful nickel content optimization.
- 2 July 2025
- Published by Elsevier in Materials Science and Engineering: A
- Vol. 943
The advantage of K-TIG on the heat-affected zone microstructure in 347H stainless steel welding
- 2 July 2025
- Published by Elsevier in Materials Science and Engineering: A
- Vol. 943
The advantage of K-TIG on the heat-affected zone microstructure in 347H stainless steel welding