Laurent Lamaignère
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Laurent Lamaignère has a total of 107 co-authors. Here are the top co-authors by number of shared publications:
Nadja Roquin
Le Barp
8 shared publications- Laurent Gallais
Aix Marseille Univ, CNRS, Centrale Med, Institut Fresnel, Marseille, France
7 shared publications - Charles Bouyer
CEA CESTA
6 shared publications J.-L. Rullier
CEA 1 , CESTA, F-33116 Le Barp, France
4 shared publicationsJ.-Y. Natoli
Aix-Marseille Univ, CNRS, Centrale Marseille, Institut Fresnel, Marseille, France
4 shared publications- Jean-François Gleyze
Le Barp
4 shared publications
Latest Publications
- Open Access
- 8 July 2026
- Published by Cambridge University Press (CUP) in High Power Laser Science and Engineering
- Vol. 14, 1-10
Effect of beam polarization on a fused silica component damaged with a nanosecond ultraviolet laser beam
Circular laser beam polarization is known to be an alternative tool to increase the damage resistance of optical components to ultraviolet (UV) laser irradiation. In this work, we carefully study its influence on the nonlinear processes mainly responsible for laser damage, which are the Kerr effect and the photo-ionization process. In particular, we show that the circular polarization benefit in the UV domain is mainly observable on thick optical samples. Whatever the laser beam spatial shape is, there is no gain when using circular polarization with thin optical components for nanosecond UV laser beam when the fluence is lower than 25 J/cm 2 . Moreover, our measurements show that laser polarization has no impact on damage growth.
- 8 July 2026
- Published by Cambridge University Press (CUP) in High Power Laser Science and Engineering
- Vol. 14, 1-10
Open AccessEffect of beam polarization on a fused silica component damaged with a nanosecond ultraviolet laser beam
Circular laser beam polarization is known to be an alternative tool to increase the damage resistance of optical components to ultraviolet (UV) laser irradiation. In this work, we carefully study its influence on the nonlinear processes mainly responsible for laser damage, which are the Kerr effect and the photo-ionization process. In particular, we show that the circular polarization benefit in the UV domain is mainly observable on thick optical samples. Whatever the laser beam spatial shape is, there is no gain when using circular polarization with thin optical components for nanosecond UV laser beam when the fluence is lower than 25 J/cm 2 . Moreover, our measurements show that laser polarization has no impact on damage growth.
- 7 May 2026
- Published by Optica Publishing Group in Applied Optics
- Vol. 65 (14) , 4817-4823
Nanosecond dual-wavelength irradiation effects on laser-induced damage in hafnia coatings
Nanosecond dual-wavelength laser-induced damage was investigated at 1064 nm ( 1 ω ) and 355 nm ( 3 ω ) on ion-beam-sputtered hafnia single-layer coatings. Single-wavelength 1-on-1 tests were first conducted to establish reference onset fluences. Dual-wavelength tests combined a primary beam with variable fluence at one wavelength and a background, secondary wavelength beam with fixed fluences set to several percentages of the corresponding onset fluence. When 1 ω was used as the background irradiation, the perceived damage resistance at 3 ω decreased gradually. In contrast, 3 ω background irradiation at as little as 10% of the onset fluence led to an abrupt ≈50% reduction in the perceived 1 ω damage resistance, followed by modest changes upon further increases in 3 ω background fluences. Scanning electron microscopy and conversion ratios indicate that 3 ω light is the primary driver of damage onset in the case of dual wavelength irradiation. A two-step precursor generation and activation model reproduces the 3 ω behavior ( 1 ω as background), but not the strong initial 1 ω reduction ( 3 ω as background), suggesting additional 3 ω -induced precursors that saturate at low fluence.
- 7 May 2026
- Published by Optica Publishing Group in Applied Optics
- Vol. 65 (14) , 4817-4823
Nanosecond dual-wavelength irradiation effects on laser-induced damage in hafnia coatings
Nanosecond dual-wavelength laser-induced damage was investigated at 1064 nm ( 1 ω ) and 355 nm ( 3 ω ) on ion-beam-sputtered hafnia single-layer coatings. Single-wavelength 1-on-1 tests were first conducted to establish reference onset fluences. Dual-wavelength tests combined a primary beam with variable fluence at one wavelength and a background, secondary wavelength beam with fixed fluences set to several percentages of the corresponding onset fluence. When 1 ω was used as the background irradiation, the perceived damage resistance at 3 ω decreased gradually. In contrast, 3 ω background irradiation at as little as 10% of the onset fluence led to an abrupt ≈50% reduction in the perceived 1 ω damage resistance, followed by modest changes upon further increases in 3 ω background fluences. Scanning electron microscopy and conversion ratios indicate that 3 ω light is the primary driver of damage onset in the case of dual wavelength irradiation. A two-step precursor generation and activation model reproduces the 3 ω behavior ( 1 ω as background), but not the strong initial 1 ω reduction ( 3 ω as background), suggesting additional 3 ω -induced precursors that saturate at low fluence.
- 24 March 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (7) , 11890-11902
Impact of the electric field enhancement on the laser damage resistance of transmission gratings operating in the UV and nanosecond regime
The Megajoule Laser (LMJ) uses large transmission diffraction gratings composed of fused silica to focus high-energy laser beams at 351 nm. These gratings operate in the final stage of the laser beamline and must withstand high-energy nanosecond pulses. Increasing the laser-induced damage threshold (LIDT) of transmission gratings is a challenge that requires a detailed understanding of the damage process. Here we numerically and experimentally study the LIDT of silica-based transmission gratings as a function of the electric field intensities (EFI) occurring in the vicinity of the nanostructured surface of diffraction gratings. Damage tests are performed on different samples under varying polarizations and incident angles and compared with numerical EFI simulations. We show that the damage threshold is strongly correlated with the maximum EFI occurring inside the silica pillars of the grating. We evidence a linear relation between the LIDT and the EFI with parameters depending on the sample quality.
- 24 March 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (7) , 11890-11902
Impact of the electric field enhancement on the laser damage resistance of transmission gratings operating in the UV and nanosecond regime
The Megajoule Laser (LMJ) uses large transmission diffraction gratings composed of fused silica to focus high-energy laser beams at 351 nm. These gratings operate in the final stage of the laser beamline and must withstand high-energy nanosecond pulses. Increasing the laser-induced damage threshold (LIDT) of transmission gratings is a challenge that requires a detailed understanding of the damage process. Here we numerically and experimentally study the LIDT of silica-based transmission gratings as a function of the electric field intensities (EFI) occurring in the vicinity of the nanostructured surface of diffraction gratings. Damage tests are performed on different samples under varying polarizations and incident angles and compared with numerical EFI simulations. We show that the damage threshold is strongly correlated with the maximum EFI occurring inside the silica pillars of the grating. We evidence a linear relation between the LIDT and the EFI with parameters depending on the sample quality.
- 21 November 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (23) , 7300-7303
Effect of shot number on laser damage of fused silica: experimental test of the Max-of-N model
Laser-induced damage initiation on the exit surface of fused silica optics triggered by nanosecond pulses at 351 nm is mostly studied for single laser shots. In this paper, we experimentally investigate how the number of laser shots influences the number of initiated damage sites in the case of an unstable laser beam. More precisely, our experiments question the validity of the “Max-of-N” model [Liao et al. , Appl. Opt. 50 , 3547 ( 2011 ) 10.1364/AO.50.003547 ]. Results show that, in some cases, the modSel correctly predicts the laser damage risk. However, in other cases, it overestimates the damage. We attribute this phenomenon to an increase in the laser damage resistance of the optic, known as laser conditioning, occurring during successive laser shots.
- 21 November 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (23) , 7300-7303
Effect of shot number on laser damage of fused silica: experimental test of the Max-of-N model
Laser-induced damage initiation on the exit surface of fused silica optics triggered by nanosecond pulses at 351 nm is mostly studied for single laser shots. In this paper, we experimentally investigate how the number of laser shots influences the number of initiated damage sites in the case of an unstable laser beam. More precisely, our experiments question the validity of the “Max-of-N” model [Liao et al. , Appl. Opt. 50 , 3547 ( 2011 ) 10.1364/AO.50.003547 ]. Results show that, in some cases, the modSel correctly predicts the laser damage risk. However, in other cases, it overestimates the damage. We attribute this phenomenon to an increase in the laser damage resistance of the optic, known as laser conditioning, occurring during successive laser shots.
- 1 June 2025
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 96 (6)
Phase-modulated injection seeding for testing laser-induced damage of thick optics with Q-switch lasers
Injection seeding with Nd:YAG Q-switch lasers ensures single-longitudinal mode (SLM) pulses that are temporally smooth and repeatable. However, SLM pulses carry a narrow spectrum that may trigger backward-stimulated Brillouin scattering during laser-induced damage testing of transmissive optics. We present a custom and patented injection seeding laser called Φimo. We implemented this system on two similar laser-induced damage testbeds equipped with Nd:YAG Q-switch lasers. Φimo generates a phase-modulated injection seeding laser to annihilate backward stimulated Brillouin scattering during tests while ensuring a very slightly modulated and repeatable temporal profile. This is achieved with a fine control of the modulation frequency of the phase modulator for each laser. With this system, we can correctly estimate the damage density of 34 mm thick fused silica optics at 355 nm.
- 1 June 2025
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 96 (6)
Phase-modulated injection seeding for testing laser-induced damage of thick optics with Q-switch lasers
Injection seeding with Nd:YAG Q-switch lasers ensures single-longitudinal mode (SLM) pulses that are temporally smooth and repeatable. However, SLM pulses carry a narrow spectrum that may trigger backward-stimulated Brillouin scattering during laser-induced damage testing of transmissive optics. We present a custom and patented injection seeding laser called Φimo. We implemented this system on two similar laser-induced damage testbeds equipped with Nd:YAG Q-switch lasers. Φimo generates a phase-modulated injection seeding laser to annihilate backward stimulated Brillouin scattering during tests while ensuring a very slightly modulated and repeatable temporal profile. This is achieved with a fine control of the modulation frequency of the phase modulator for each laser. With this system, we can correctly estimate the damage density of 34 mm thick fused silica optics at 355 nm.
- Open Access
- 9 January 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (2)
Influence of laser polarization on the laser-induced damage threshold: Comparison with photoionization theory
The influence of laser polarization on the laser-induced damage threshold of fused silica is presented. Measurements were performed using femtosecond and nanosecond laser pulse durations. The impact of laser polarization on the laser damage varies with laser wavelength. While no difference in UV laser damage was observed between linear and circular polarizations, circular polarization improved the damage resistance of fused silica to infrared and visible laser radiation in comparison with linear polarization. By measuring the femtosecond laser damage of a SiO2 thin film deposited onto a substrate, we show that the ratio between the bandgap of the sample and the photon energy causes the polarization dependent laser damage to change. These experimental findings are explained by considering the photoionization theory for solids.
- 9 January 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (2)
Open AccessInfluence of laser polarization on the laser-induced damage threshold: Comparison with photoionization theory
The influence of laser polarization on the laser-induced damage threshold of fused silica is presented. Measurements were performed using femtosecond and nanosecond laser pulse durations. The impact of laser polarization on the laser damage varies with laser wavelength. While no difference in UV laser damage was observed between linear and circular polarizations, circular polarization improved the damage resistance of fused silica to infrared and visible laser radiation in comparison with linear polarization. By measuring the femtosecond laser damage of a SiO2 thin film deposited onto a substrate, we show that the ratio between the bandgap of the sample and the photon energy causes the polarization dependent laser damage to change. These experimental findings are explained by considering the photoionization theory for solids.
- Open Access
- 20 December 2024
- Published by Elsevier in Optics & Laser Technology
- Vol. 183
Laser damage thresholds of underwater anti-reflection coatings for face-cooling of high power Yb:YAG laser disks
- 20 December 2024
- Published by Elsevier in Optics & Laser Technology
- Vol. 183
Open AccessLaser damage thresholds of underwater anti-reflection coatings for face-cooling of high power Yb:YAG laser disks
- 8 July 2024
- Published by Optica Publishing Group in Applied Optics
- Vol. 63 (20) , 5403-5410
Multishot laser damage of multilayer dielectric mirrors in the near-infrared subpicosecond regime
The laser damage resistance of dielectric components of high-power laser facilities to laser irradiation depends significantly on the irradiation sequence. In the short pulse (fs) regime, it is known that continuous irradiation of these components leads to a reduction in the damage threshold, reflecting a laser fatigue effect. Conversely, in the long pulse (ns) regime, progressive irradiation of these components leads to an increase in the damage threshold, reflecting a laser conditioning effect. In this article, we experimentally evaluate the competition between the effects of laser fatigue and laser conditioning for multilayer dielectric components irradiated in the subpicosecond pulse regime in the infrared (∼1µm) through different test sequences. For this purpose, we implemented an original test sequence derived from an S-on-1 type protocol, which consists of irradiating the component until damage. By repeating this sequence at different set points, it was possible to estimate the progressive reduction in damage threshold with the number of laser irradiations and to compare it with that observed during the fluence ramps. Particular attention was also paid to the precise knowledge of the test beam irradiating the component, as a dependence of the beam surface on the test set point was highlighted.
- 8 July 2024
- Published by Optica Publishing Group in Applied Optics
- Vol. 63 (20) , 5403-5410
Multishot laser damage of multilayer dielectric mirrors in the near-infrared subpicosecond regime
The laser damage resistance of dielectric components of high-power laser facilities to laser irradiation depends significantly on the irradiation sequence. In the short pulse (fs) regime, it is known that continuous irradiation of these components leads to a reduction in the damage threshold, reflecting a laser fatigue effect. Conversely, in the long pulse (ns) regime, progressive irradiation of these components leads to an increase in the damage threshold, reflecting a laser conditioning effect. In this article, we experimentally evaluate the competition between the effects of laser fatigue and laser conditioning for multilayer dielectric components irradiated in the subpicosecond pulse regime in the infrared (∼1µm) through different test sequences. For this purpose, we implemented an original test sequence derived from an S-on-1 type protocol, which consists of irradiating the component until damage. By repeating this sequence at different set points, it was possible to estimate the progressive reduction in damage threshold with the number of laser irradiations and to compare it with that observed during the fluence ramps. Particular attention was also paid to the precise knowledge of the test beam irradiating the component, as a dependence of the beam surface on the test set point was highlighted.
- Open Access
- 1 December 2023
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 94 (12)
Assessing low laser damage densities of fused silica optics by means of a functional raster scan protocol
The knowledge of the laser damage resistance of fused silica optics for their use in high-power lasers is of primary importance for the operation and maintenance of these facilities. Among the control procedures developed, one of the most relevant to date is the raster scan procedure [Lamaignère et al., Rev. Sci. Instrum. 78, 103105 (2007)]. This procedure is used to determine the damage density of optical components as a function of fluence. To date, this procedure takes into account all triggered damage sites, regardless of their size and/or morphology. We have added a step to this procedure, which consists in irradiating again all the damage sites with a series of shots to ascertain their ability to grow. This allows us to estimate the densities of growing damage sites, which are most critical for the safe operation of lasers. This pragmatic approach can be considered a functional test procedure. By applying this procedure to large optical areas, we were then able to measure extremely low damage densities (∼10−4 damage cm−2) over a wide range of fluences [0–18 J cm−2], corresponding to fluences to which the optics are irradiated during the operation of high-power lasers. We can then determine the damage law of a given set of optical components. This reference law makes it possible, on the one hand, to predict the lifetime of the optics. On the other hand, any deviation can then be analyzed with regard to this reference law. Thanks to the determination of confidence intervals, this functional procedure can also be used to delimit the reference law by upper and lower bounds.
- 1 December 2023
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 94 (12)
Open AccessAssessing low laser damage densities of fused silica optics by means of a functional raster scan protocol
The knowledge of the laser damage resistance of fused silica optics for their use in high-power lasers is of primary importance for the operation and maintenance of these facilities. Among the control procedures developed, one of the most relevant to date is the raster scan procedure [Lamaignère et al., Rev. Sci. Instrum. 78, 103105 (2007)]. This procedure is used to determine the damage density of optical components as a function of fluence. To date, this procedure takes into account all triggered damage sites, regardless of their size and/or morphology. We have added a step to this procedure, which consists in irradiating again all the damage sites with a series of shots to ascertain their ability to grow. This allows us to estimate the densities of growing damage sites, which are most critical for the safe operation of lasers. This pragmatic approach can be considered a functional test procedure. By applying this procedure to large optical areas, we were then able to measure extremely low damage densities (∼10−4 damage cm−2) over a wide range of fluences [0–18 J cm−2], corresponding to fluences to which the optics are irradiated during the operation of high-power lasers. We can then determine the damage law of a given set of optical components. This reference law makes it possible, on the one hand, to predict the lifetime of the optics. On the other hand, any deviation can then be analyzed with regard to this reference law. Thanks to the determination of confidence intervals, this functional procedure can also be used to delimit the reference law by upper and lower bounds.
- Open Access
- 4 September 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-10
Linear-to-circular polarization conversion with full-silica meta-optics to reduce nonlinear effects in high-energy lasers
High-energy lasers have benefited from intense efforts to bring light-matter interactions to new standards and to achieve laser fusion ignition. One of the main issues to further increasing laser energy is the resistance of optical materials to high laser fluences, in particular at the final stage of the laser beamline where nonlinear Kerr effects can occur in optical materials and provoke laser filamentation. One promising way to mitigate this process is to reduce the nonlinear susceptibility of the material by switching the polarization from a linear to a circular state. Here, we report a significant reduction in the laser filamentation effect on glass by using a full-silica metamaterial waveplateable to switch the linear-to-circular polarization of high fluence laser beams. This result is achieved through the use of a large size full-silica meta-optics exhibiting nominal polarization conversion associated with an excellent transmission efficiency and wavefront quality, as well as a high laser damage resistance.
- 4 September 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-10
Open AccessLinear-to-circular polarization conversion with full-silica meta-optics to reduce nonlinear effects in high-energy lasers
High-energy lasers have benefited from intense efforts to bring light-matter interactions to new standards and to achieve laser fusion ignition. One of the main issues to further increasing laser energy is the resistance of optical materials to high laser fluences, in particular at the final stage of the laser beamline where nonlinear Kerr effects can occur in optical materials and provoke laser filamentation. One promising way to mitigate this process is to reduce the nonlinear susceptibility of the material by switching the polarization from a linear to a circular state. Here, we report a significant reduction in the laser filamentation effect on glass by using a full-silica metamaterial waveplateable to switch the linear-to-circular polarization of high fluence laser beams. This result is achieved through the use of a large size full-silica meta-optics exhibiting nominal polarization conversion associated with an excellent transmission efficiency and wavefront quality, as well as a high laser damage resistance.