Gordon J. Grzybowski
Gordon J. Grzybowski has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Bruce Claflin
Air Force Research Laboratory, Sensors Directorate, Wright-Patterson Air Force Base 3 , Dayton, Ohio 45433
11 shared publications - James S. Williams
Australian National University
3 shared publications - Jiechao Jiang
Department of Materials Science and Engineering, University of Texas at Arlington, Arlington, TX 76019, USA
3 shared publications - Lachlan Smillie
Electron Microscopy Centre, University of Wollongong 3 , Wollongong NSW2522
3 shared publications - Shao Qi Lim
University of Melbourne
3 shared publications - Xingshuo Huang
The Australian National University
3 shared publications
Latest Publications
- Open Access
- 12 August 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (6)
Dilute Pb in Ge materials fabricated by ion implantation and pulsed laser melting
Germanium lead (GePb) alloys have shown promising potential as a material platform for fabricating mid-infrared photodetectors, where the Pb content enables tuning of the bandgap. However, fabricating such devices using GePb is challenging because the equilibrium solid solubility of Pb in Ge is in the parts per million range. Here, we synthesize the metastable GePb alloy by Pb implantation into Ge, followed by pulsed laser melting. By varying the ion implantation and melting conditions, we identify a processing window that yields GePb alloy films of high crystalline quality, with a substitutional Pb amount of at least 1.6 × 1015 Pb atoms/cm2, which is equivalent to a Pb concentration of around 0.36 at. %, more than 3 orders of magnitude above the equilibrium solubility. These results establish a pathway to fabricating GePb for mid-infrared photodetection applications using non-equilibrium ion implantation, ultra-rapid melting, and solidification.
- 12 August 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (6)
Open AccessDilute Pb in Ge materials fabricated by ion implantation and pulsed laser melting
Germanium lead (GePb) alloys have shown promising potential as a material platform for fabricating mid-infrared photodetectors, where the Pb content enables tuning of the bandgap. However, fabricating such devices using GePb is challenging because the equilibrium solid solubility of Pb in Ge is in the parts per million range. Here, we synthesize the metastable GePb alloy by Pb implantation into Ge, followed by pulsed laser melting. By varying the ion implantation and melting conditions, we identify a processing window that yields GePb alloy films of high crystalline quality, with a substitutional Pb amount of at least 1.6 × 1015 Pb atoms/cm2, which is equivalent to a Pb concentration of around 0.36 at. %, more than 3 orders of magnitude above the equilibrium solubility. These results establish a pathway to fabricating GePb for mid-infrared photodetection applications using non-equilibrium ion implantation, ultra-rapid melting, and solidification.
- Open Access
- 4 November 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (17)
Threading dislocations in epitaxial GeSn film directly grown on (001) Si substrates
High-quality epitaxial GeSn films grown directly on Si substrates are highly desirable for integrated photonics applications, as eliminating the intermediate buffer layer simplifies device fabrication. A ∼1 μm thick, epitaxial Ge0.95Sn0.05 film was grown directly on a (001) Si substrate by remote plasma-enhanced chemical vapor deposition using a two-step process: an ultra-thin GeSn initiation layer was first deposited at 421 °C for 1 min, followed by the main film deposition at 330 °C for 85 min. Here, we analyze the detailed microstructure of the GeSn film using atomic force microscopy, Raman spectroscopy, x-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The Ge0.95Sn0.05 film exhibits a hill and valley-like surface morphology and a sharp interface with the substrate. It consists of a ∼150 nm bottom epilayer containing characteristic twin structures, and an ∼850 nm upper epilayer composed of dense, vertically oriented columnar structures with lateral dimensions ranging from approximately 200–300 nm. These columns are bounded by vertically aligned interfaces composed of straight threading dislocations that extend from near the substrate interface through the film to the surface. The Burgers vectors of the threading dislocations were identified as 1/2[110] and/or 1/2[−110]. The columnar boundaries, rich in strain, are responsible for the development of the observed rugged, hill and valley-like surface topography. The formation of the threading dislocations is likely attributed to local fluctuations in Sn content. The observed microstructure offers valuable insight into the growth mechanism, which can be leveraged to optimize the process for enhanced film quality suitable for device applications.
- 4 November 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (17)
Open AccessThreading dislocations in epitaxial GeSn film directly grown on (001) Si substrates
High-quality epitaxial GeSn films grown directly on Si substrates are highly desirable for integrated photonics applications, as eliminating the intermediate buffer layer simplifies device fabrication. A ∼1 μm thick, epitaxial Ge0.95Sn0.05 film was grown directly on a (001) Si substrate by remote plasma-enhanced chemical vapor deposition using a two-step process: an ultra-thin GeSn initiation layer was first deposited at 421 °C for 1 min, followed by the main film deposition at 330 °C for 85 min. Here, we analyze the detailed microstructure of the GeSn film using atomic force microscopy, Raman spectroscopy, x-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The Ge0.95Sn0.05 film exhibits a hill and valley-like surface morphology and a sharp interface with the substrate. It consists of a ∼150 nm bottom epilayer containing characteristic twin structures, and an ∼850 nm upper epilayer composed of dense, vertically oriented columnar structures with lateral dimensions ranging from approximately 200–300 nm. These columns are bounded by vertically aligned interfaces composed of straight threading dislocations that extend from near the substrate interface through the film to the surface. The Burgers vectors of the threading dislocations were identified as 1/2[110] and/or 1/2[−110]. The columnar boundaries, rich in strain, are responsible for the development of the observed rugged, hill and valley-like surface topography. The formation of the threading dislocations is likely attributed to local fluctuations in Sn content. The observed microstructure offers valuable insight into the growth mechanism, which can be leveraged to optimize the process for enhanced film quality suitable for device applications.
- 23 May 2025
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 43 (4)
In situ metal organic chemical vapor deposition of ultrathin sp2-bonded boron nitride dielectric on gallium nitride
Boron nitride (BN) is one of the best dielectric materials for two-dimensional materials due to its van der Waals bonding, ultrawide bandgap, and dielectric and breakdown properties. For conventional semiconductors materials, such as GaN, BN may offer many of these same advantages. Here, we report on in situ metal organic chemical vapor deposition of few nanometer thick sp2-bonded BN on GaN and AlGaN/GaN structures. To achieve high-quality BN/GaN interfaces, growth temperature and time were optimized to achieve thin and smooth BN layers with minimal impact on the GaN layer. At a growth temperature of 1060 °C for 15 min, continuous 4 nm thick BN layers with surface roughness as low as 0.35 nm were achieved. Current-voltage (IV) measurements of BN on n-type GaN metal-insulator-semiconductor (MIS) diodes showed significantly reduced reverse leakage and lower ideality factors compared to Ni/GaN Schottky diodes. From capacitance-voltage (CV) measurements, a built-in voltage of ∼2.2 V was measured, which is consistent with the BN/GaN band offset determined by x-ray photoelectron spectroscopy. The deposition of BN on AlGaN/GaN structures showed minimal degradation of the two-dimensional electron gas transport properties. IV and CV measurements of BN/AlGaN/GaN MIS diodes showed a 3600 times reduction in the reverse leakage current compared to a standard Schottky and had hysteresis less than 0.1 V.
- 23 May 2025
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 43 (4)
In situ metal organic chemical vapor deposition of ultrathin sp2-bonded boron nitride dielectric on gallium nitride
Boron nitride (BN) is one of the best dielectric materials for two-dimensional materials due to its van der Waals bonding, ultrawide bandgap, and dielectric and breakdown properties. For conventional semiconductors materials, such as GaN, BN may offer many of these same advantages. Here, we report on in situ metal organic chemical vapor deposition of few nanometer thick sp2-bonded BN on GaN and AlGaN/GaN structures. To achieve high-quality BN/GaN interfaces, growth temperature and time were optimized to achieve thin and smooth BN layers with minimal impact on the GaN layer. At a growth temperature of 1060 °C for 15 min, continuous 4 nm thick BN layers with surface roughness as low as 0.35 nm were achieved. Current-voltage (IV) measurements of BN on n-type GaN metal-insulator-semiconductor (MIS) diodes showed significantly reduced reverse leakage and lower ideality factors compared to Ni/GaN Schottky diodes. From capacitance-voltage (CV) measurements, a built-in voltage of ∼2.2 V was measured, which is consistent with the BN/GaN band offset determined by x-ray photoelectron spectroscopy. The deposition of BN on AlGaN/GaN structures showed minimal degradation of the two-dimensional electron gas transport properties. IV and CV measurements of BN/AlGaN/GaN MIS diodes showed a 3600 times reduction in the reverse leakage current compared to a standard Schottky and had hysteresis less than 0.1 V.
- 30 August 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (5)
Optical and electronic properties of Ge1−xSnx/Si alloys grown by remote plasma-enhanced chemical vapor deposition
Solid state detectors composed of GeSn (germanium-tin) alloys offer improved capabilities compared with mercury cadmium telluride detectors. GeSn detectors may be smaller in size and weight, capable of operating with a noncryogenic detector, and provide increased sensitivity. Recent advances in nonequilibrium remote plasma-enhanced chemical vapor deposition growth enable GeSn crystalline growth with up to 10% Sn concentration, free of surface migration. Absorption spectroscopy combined with Tauc analysis results in 0.79, 0.73, 0.69, 0.59, 0.57, and 0.51 eV direct bandgap energies for GeSn samples with 0%, 2.7%, 4.6%, 6.6%, 7.1%, and 8.0% Sn, respectively. These absorption bandgap energies closely agree with density functional theory energies within ±0.05 eV. However, the rate of change of indirect bandgap narrowing as a function of Sn content is more diverse than a numerical result. The current research evidences that the indirect-to-direct transition crossover point occurs at a Sn content greater than 8%. From the analysis of the Urbach tail, the optical bandgap exhibits a potential structure disorder in the Urbach region. For example, this disorder may cause bandgap narrowing by more than 50% of the intrinsic bandgap energy in the highest Sn content (e.g., 8% Sn) sample. The surface Fermi level approximation validates p-type Fermi level pinning very close to the valence band maximum, often seen in highly doped semiconductors.
- 30 August 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (5)
Optical and electronic properties of Ge1−xSnx/Si alloys grown by remote plasma-enhanced chemical vapor deposition
Solid state detectors composed of GeSn (germanium-tin) alloys offer improved capabilities compared with mercury cadmium telluride detectors. GeSn detectors may be smaller in size and weight, capable of operating with a noncryogenic detector, and provide increased sensitivity. Recent advances in nonequilibrium remote plasma-enhanced chemical vapor deposition growth enable GeSn crystalline growth with up to 10% Sn concentration, free of surface migration. Absorption spectroscopy combined with Tauc analysis results in 0.79, 0.73, 0.69, 0.59, 0.57, and 0.51 eV direct bandgap energies for GeSn samples with 0%, 2.7%, 4.6%, 6.6%, 7.1%, and 8.0% Sn, respectively. These absorption bandgap energies closely agree with density functional theory energies within ±0.05 eV. However, the rate of change of indirect bandgap narrowing as a function of Sn content is more diverse than a numerical result. The current research evidences that the indirect-to-direct transition crossover point occurs at a Sn content greater than 8%. From the analysis of the Urbach tail, the optical bandgap exhibits a potential structure disorder in the Urbach region. For example, this disorder may cause bandgap narrowing by more than 50% of the intrinsic bandgap energy in the highest Sn content (e.g., 8% Sn) sample. The surface Fermi level approximation validates p-type Fermi level pinning very close to the valence band maximum, often seen in highly doped semiconductors.
- 20 August 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (5)
Remote plasma-enhanced chemical vapor deposition of GeSn on Si (100), Si (111), sapphire, and fused silica substrates
GeSn films were simultaneously deposited on Si (100), Si (111), c-plane sapphire (Al2O3), and fused silica substrates to investigate the impact of the substrate on the resulting GeSn film. The electronic, structural, and optical properties of these films were characterized by temperature-dependent Hall-effect measurements, x-ray diffractometry, secondary ion mass spectrometry, and variable angle spectroscopic ellipsometry. All films were polycrystalline with varying degrees of texturing. The film on Si (100) contained only GeSn (100) grains, 40.4 nm in diameter. The film deposited on Si (111) contained primarily GeSn (111) grains, 36.4 nm in diameter. Both films deposited on silicon substrates were fully relaxed. The layer deposited on Al2O3 contained primarily GeSn (111) grains, 41.3 nm in diameter. The film deposited on fused silica was not textured, and the average grain size was 35.0 nm. All films contained ∼5.6 at. % Sn throughout the layer, except for the film deposited on Al2O3, which contained 7.5% Sn. The films deposited on Si (111), Al2O3, and fused silica exhibit p-type conduction over the entire temperature range, 10–325 K, while the layer deposited on the Si (100) substrate shows a mixed conduction transition from p-type at low temperature to n-type above 220 K. From ∼175 to 260 K, both holes and electrons contribute to conduction. Texturing of the GeSn film on Si (100) was the only characteristic that set this film apart from the other three films, suggesting that something related to GeSn (100) crystal orientation causes this transition from p- to n-type conduction.
- 20 August 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (5)
Remote plasma-enhanced chemical vapor deposition of GeSn on Si (100), Si (111), sapphire, and fused silica substrates
GeSn films were simultaneously deposited on Si (100), Si (111), c-plane sapphire (Al2O3), and fused silica substrates to investigate the impact of the substrate on the resulting GeSn film. The electronic, structural, and optical properties of these films were characterized by temperature-dependent Hall-effect measurements, x-ray diffractometry, secondary ion mass spectrometry, and variable angle spectroscopic ellipsometry. All films were polycrystalline with varying degrees of texturing. The film on Si (100) contained only GeSn (100) grains, 40.4 nm in diameter. The film deposited on Si (111) contained primarily GeSn (111) grains, 36.4 nm in diameter. Both films deposited on silicon substrates were fully relaxed. The layer deposited on Al2O3 contained primarily GeSn (111) grains, 41.3 nm in diameter. The film deposited on fused silica was not textured, and the average grain size was 35.0 nm. All films contained ∼5.6 at. % Sn throughout the layer, except for the film deposited on Al2O3, which contained 7.5% Sn. The films deposited on Si (111), Al2O3, and fused silica exhibit p-type conduction over the entire temperature range, 10–325 K, while the layer deposited on the Si (100) substrate shows a mixed conduction transition from p-type at low temperature to n-type above 220 K. From ∼175 to 260 K, both holes and electrons contribute to conduction. Texturing of the GeSn film on Si (100) was the only characteristic that set this film apart from the other three films, suggesting that something related to GeSn (100) crystal orientation causes this transition from p- to n-type conduction.
- 1 July 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (4)
X-ray photoelectron spectroscopy surface oxidation study of remote plasma-enhanced chemical vapor deposition-grown Ge1−xSnx/Si alloys
Recent progress in the remote plasma-enhanced chemical vapor deposition of Ge1−xSnx grown directly on Si substrates has improved crystal structure quality. To understand the impact of postgrowth storage, we study oxidation states of Ge1−xSnx alloys, for x values of 7.5%, 8.8%, 12.5%, and 19.3%. A surface oxidation layer formed naturally at room temperature over five months is quantified using angle-resolved x-ray photoelectron spectroscopy. The GeSn alloys exhibit a high surface oxide concentration with a minimum of 77% in Sn 3d peak analysis. Ge is less susceptible to oxidation than Sn, with oxidation percentages ranging from 25% to 86%. The Sn dopant enhances the oxidation features associated with the Ge 3p peak, aiding surface oxidation and penetrating further into the film. It is feasible that the 4+ state Sn from the precursor readily oxidizes postgrowth resulting in an oxide-rich surface layer.
- 1 July 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (4)
X-ray photoelectron spectroscopy surface oxidation study of remote plasma-enhanced chemical vapor deposition-grown Ge1−xSnx/Si alloys
Recent progress in the remote plasma-enhanced chemical vapor deposition of Ge1−xSnx grown directly on Si substrates has improved crystal structure quality. To understand the impact of postgrowth storage, we study oxidation states of Ge1−xSnx alloys, for x values of 7.5%, 8.8%, 12.5%, and 19.3%. A surface oxidation layer formed naturally at room temperature over five months is quantified using angle-resolved x-ray photoelectron spectroscopy. The GeSn alloys exhibit a high surface oxide concentration with a minimum of 77% in Sn 3d peak analysis. Ge is less susceptible to oxidation than Sn, with oxidation percentages ranging from 25% to 86%. The Sn dopant enhances the oxidation features associated with the Ge 3p peak, aiding surface oxidation and penetrating further into the film. It is feasible that the 4+ state Sn from the precursor readily oxidizes postgrowth resulting in an oxide-rich surface layer.
- Open Access
- 12 June 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (4)
Comparison of GeSn alloy films prepared by ion implantation and remote plasma-enhanced chemical vapor deposition methods
Thin films of germanium-tin (GeSn) alloy with Sn content well above its equilibrium solubility limit in Ge are produced using both remote plasma-enhanced chemical vapor deposition (RPECVD) directly on silicon substrates and ion implantation of Sn into Ge. For RPECVD, the growth temperature of 302 °C resulted in fully relaxed GeSn alloys with high defect density, principally threading dislocations related to the large lattice mismatch between Si and GeSn. For the implantation case, pulsed laser melting was used to melt and crystallize the GeSn layer on a time scale of a few tens of nanoseconds. The resulting GeSn layers were also relaxed and defective, presumably again as a result of lattice mismatch with the underlying Ge lattice. However, the nature of the defects was quite different to the RPECVD method, whereby the line defects were not threading dislocations but stackinglike defects, which developed into arrays of these defects in the high Sn content region close to the surface. For the purpose of comparing RPECVD and ion-implantation methods, alloy films of similar thickness (400–450 nm) and Sn content (4.5–6.5 at. %) were examined. Film parameters (thickness, Sn content, Sn solubility, and segregation), as well as film quality and defect structures, were examined for both fabrication methods using several analytical techniques. This comparison provided us with a better physical understanding of our GeSn films and will help inform future growth/fabrication strategies targeted at minimizing defects formed in the GeSn films for the realization of optoelectronic devices.
- 12 June 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (4)
Open AccessComparison of GeSn alloy films prepared by ion implantation and remote plasma-enhanced chemical vapor deposition methods
Thin films of germanium-tin (GeSn) alloy with Sn content well above its equilibrium solubility limit in Ge are produced using both remote plasma-enhanced chemical vapor deposition (RPECVD) directly on silicon substrates and ion implantation of Sn into Ge. For RPECVD, the growth temperature of 302 °C resulted in fully relaxed GeSn alloys with high defect density, principally threading dislocations related to the large lattice mismatch between Si and GeSn. For the implantation case, pulsed laser melting was used to melt and crystallize the GeSn layer on a time scale of a few tens of nanoseconds. The resulting GeSn layers were also relaxed and defective, presumably again as a result of lattice mismatch with the underlying Ge lattice. However, the nature of the defects was quite different to the RPECVD method, whereby the line defects were not threading dislocations but stackinglike defects, which developed into arrays of these defects in the high Sn content region close to the surface. For the purpose of comparing RPECVD and ion-implantation methods, alloy films of similar thickness (400–450 nm) and Sn content (4.5–6.5 at. %) were examined. Film parameters (thickness, Sn content, Sn solubility, and segregation), as well as film quality and defect structures, were examined for both fabrication methods using several analytical techniques. This comparison provided us with a better physical understanding of our GeSn films and will help inform future growth/fabrication strategies targeted at minimizing defects formed in the GeSn films for the realization of optoelectronic devices.
- Open Access
- 25 April 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 135 (16)
Epitaxial twin coupled microstructure in GeSn films prepared by remote plasma enhanced chemical vapor deposition
Growth of GeSn films directly on Si substrates is desirable for integrated photonics applications since the absence of an intervening buffer layer simplifies device fabrication. Here, we analyze the microstructure of two GeSn films grown directly on (001) Si by remote plasma-enhanced chemical vapor deposition (RPECVD): a 1000 nm thick film containing 3% Sn and a 600 nm thick, 10% Sn film. Both samples consist of an epitaxial layer with nano twins below a composite layer containing nanocrystalline and amorphous. The epilayer has uniform composition, while the nanocrystalline material has higher levels of Sn than the surrounding amorphous matrix. These two layers are separated by an interface with a distinct, hilly morphology. The transition between the two layers is facilitated by formation of densely populated (111)-coupled nano twins. The 10% Sn sample exhibits a significantly thinner epilayer than the one with 3% Sn. The in-plane lattice mismatch between GeSn and Si induces a quasi-periodic misfit dislocation network along the interface. Film growth initiates at the interface through formation of an atomic-scale interlayer with reduced Sn content, followed by the higher Sn content epitaxial layer. A corrugated surface containing a high density of twins with elevated levels of Sn at the peaks begins forming at a critical thickness. Subsequent epitaxial breakdown at the peaks produces a composite containing high levels of Sn nanocrystalline embedded in lower level of Sn amorphous. The observed microstructure and film evolution provide valuable insight into the growth mechanism that can be used to tune the RPECVD process for improved film quality.
- 25 April 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 135 (16)
Open AccessEpitaxial twin coupled microstructure in GeSn films prepared by remote plasma enhanced chemical vapor deposition
Growth of GeSn films directly on Si substrates is desirable for integrated photonics applications since the absence of an intervening buffer layer simplifies device fabrication. Here, we analyze the microstructure of two GeSn films grown directly on (001) Si by remote plasma-enhanced chemical vapor deposition (RPECVD): a 1000 nm thick film containing 3% Sn and a 600 nm thick, 10% Sn film. Both samples consist of an epitaxial layer with nano twins below a composite layer containing nanocrystalline and amorphous. The epilayer has uniform composition, while the nanocrystalline material has higher levels of Sn than the surrounding amorphous matrix. These two layers are separated by an interface with a distinct, hilly morphology. The transition between the two layers is facilitated by formation of densely populated (111)-coupled nano twins. The 10% Sn sample exhibits a significantly thinner epilayer than the one with 3% Sn. The in-plane lattice mismatch between GeSn and Si induces a quasi-periodic misfit dislocation network along the interface. Film growth initiates at the interface through formation of an atomic-scale interlayer with reduced Sn content, followed by the higher Sn content epitaxial layer. A corrugated surface containing a high density of twins with elevated levels of Sn at the peaks begins forming at a critical thickness. Subsequent epitaxial breakdown at the peaks produces a composite containing high levels of Sn nanocrystalline embedded in lower level of Sn amorphous. The observed microstructure and film evolution provide valuable insight into the growth mechanism that can be used to tune the RPECVD process for improved film quality.
- Open Access
- 27 March 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (3)
Temperature-dependent morphology and composition of ultra-thin GeSn epilayers prepared by remote plasma enhanced chemical vapor deposition
Two distinct ultra-thin Ge1−xSnx (x ≤ 0.1) epilayers were deposited on (001) Si substrates at 457 and 313 °C through remote plasma-enhanced chemical vapor deposition. These films are considered potential initiation layers for synthesizing thick epitaxial GeSn films. The GeSn film deposited at 313 °C has a thickness of 10 nm and exhibits a highly epitaxial continuous structure with its lattice being compressed along the interface plane to coherently match Si without mismatch dislocations. The GeSn film deposited at 457 °C exhibits a discrete epitaxial island-like morphology with a peak height of ∼30 nm and full-width half maximum (FWHM) varying from 20 to 100 nm. GeSn islands with an FWHM smaller than 20 nm are defect free, whereas those exceeding 25 nm encompass nanotwins and/or stacking faults. The GeSn islands form two-dimensional modulated superlattice structures at the interface with Si. The GeSn film deposited at 457 °C possesses a lower Sn content compared to the one deposited at lower temperature. The potential impact of using these two distinct ultra-thin layers as initiation layers for the direct growth of thicker GeSn epitaxial films on (001) Si substrates is discussed.
- 27 March 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (3)
Open AccessTemperature-dependent morphology and composition of ultra-thin GeSn epilayers prepared by remote plasma enhanced chemical vapor deposition
Two distinct ultra-thin Ge1−xSnx (x ≤ 0.1) epilayers were deposited on (001) Si substrates at 457 and 313 °C through remote plasma-enhanced chemical vapor deposition. These films are considered potential initiation layers for synthesizing thick epitaxial GeSn films. The GeSn film deposited at 313 °C has a thickness of 10 nm and exhibits a highly epitaxial continuous structure with its lattice being compressed along the interface plane to coherently match Si without mismatch dislocations. The GeSn film deposited at 457 °C exhibits a discrete epitaxial island-like morphology with a peak height of ∼30 nm and full-width half maximum (FWHM) varying from 20 to 100 nm. GeSn islands with an FWHM smaller than 20 nm are defect free, whereas those exceeding 25 nm encompass nanotwins and/or stacking faults. The GeSn islands form two-dimensional modulated superlattice structures at the interface with Si. The GeSn film deposited at 457 °C possesses a lower Sn content compared to the one deposited at lower temperature. The potential impact of using these two distinct ultra-thin layers as initiation layers for the direct growth of thicker GeSn epitaxial films on (001) Si substrates is discussed.
- Open Access
- 15 June 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (23)
Remote plasma-enhanced chemical vapor deposition of GeSn on Si: Material and defect characterization
Germanium–tin (GeSn) alloys at sufficiently high Sn concentration, above several atomic percent, are the only group IV semiconductor exhibiting a direct bandgap and have generated much recent interest for optoelectronic applications into the mid-infrared region. Because the large lattice mismatch between GeSn and Si results in considerable strain for thin layers and a high defect density for thicker strain-relaxed layers, most reported GeSn growths incorporate a Ge buffer layer rather than depositing directly on Si substrates. Published reports of GeSn growth directly on Si utilize specialized precursors such as higher order germanes (Ge2H6, Ge3H8, or Ge4H10) or SnD4. In this paper, we report GeSn films with up to 10.6% Sn grown directly on Si substrates by remote plasma-enhanced chemical vapor deposition using GeH4 and SnCl4 precursors. These alloys have been characterized in detail using x-ray diffraction (XRD), transmission electron microscopy (TEM), and Rutherford backscattering spectrometry with channeling (RBS-C), as well as Raman spectroscopy (RS) and optical microscopy. The films studied are almost fully relaxed, with small residual strain observed, particularly in thinner films, and contain a high interface density of misfit dislocations that increases with Sn concentration. The defect density decreases toward the surface. Good agreement is found between the various characterization methods for the Sn content (XRD and RBS-C), lattice parameter measurement (XRD and TEM), and defect characterization (RBS-C, TEM, and RS). Such characterization of GeSn grown directly on Si substrates is essential to allow growth parameters to be optimized for the realization of the attractive optoelectronic properties of these alloys.
- 15 June 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (23)
Open AccessRemote plasma-enhanced chemical vapor deposition of GeSn on Si: Material and defect characterization
Germanium–tin (GeSn) alloys at sufficiently high Sn concentration, above several atomic percent, are the only group IV semiconductor exhibiting a direct bandgap and have generated much recent interest for optoelectronic applications into the mid-infrared region. Because the large lattice mismatch between GeSn and Si results in considerable strain for thin layers and a high defect density for thicker strain-relaxed layers, most reported GeSn growths incorporate a Ge buffer layer rather than depositing directly on Si substrates. Published reports of GeSn growth directly on Si utilize specialized precursors such as higher order germanes (Ge2H6, Ge3H8, or Ge4H10) or SnD4. In this paper, we report GeSn films with up to 10.6% Sn grown directly on Si substrates by remote plasma-enhanced chemical vapor deposition using GeH4 and SnCl4 precursors. These alloys have been characterized in detail using x-ray diffraction (XRD), transmission electron microscopy (TEM), and Rutherford backscattering spectrometry with channeling (RBS-C), as well as Raman spectroscopy (RS) and optical microscopy. The films studied are almost fully relaxed, with small residual strain observed, particularly in thinner films, and contain a high interface density of misfit dislocations that increases with Sn concentration. The defect density decreases toward the surface. Good agreement is found between the various characterization methods for the Sn content (XRD and RBS-C), lattice parameter measurement (XRD and TEM), and defect characterization (RBS-C, TEM, and RS). Such characterization of GeSn grown directly on Si substrates is essential to allow growth parameters to be optimized for the realization of the attractive optoelectronic properties of these alloys.