BÖBerna Özcan

Berna Özcan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Berna Özcan has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Evaluation of Preheating Composite Resins for Repairing Resin Nanoceramic Restorations

    by Tuğgen Özcivelek, Berna Özcan, Bahadır Kasar, Mehmet Ali Kılıçarslan

    Objective: Resin nanoceramic dental restorations may need repair. This study evaluates the microshear bond strength of two composite resins applied at two temperatures to repair two resin nanoceramic materials. Materials and Methods: Ninety-six specimens were sliced from Lava Ultimate and CeraSmart resin nanoceramic blocks and subjected to thermal aging. Following surface roughness measurements, specimens were divided into eight subgroups (n=12) based on the repair material and application temperature. Resin nanoceramic specimens were repaired using a Teflon mold with RubyComp P or RubyCompNano composite resins at 23°C or 50°C. All specimens were subjected to a microshear bond test at a 0.5 mm/min crosshead speed until failure. Failure types were classified at 5X magnification. Statistical analysis of microshear bond strength test results was performed by a three-way ANOVA test, followed by post hoc Tukey’s pairwise comparisons (α=0.05). The relationship between failure modes and resin nanoceramic, composite resin, or preheating was analyzed with a chi-square test. Results: Surface roughness of resin nanoceramics was not statistically different (p>0.05). The resin nanoceramic type and preheating of repair materials had a significant effect on microshear bond strength (p=0.006, p

  • Open Access

    Bond strength of maxillofacial silicone to various three-dimensional printing resins compared to conventional substructures

    by Berna Özcan, Tuğgen Özcivelek

    Bonding between silicone elastomers and rigid substructures is critical to clinical success of extraoral maxillofacial prostheses. This study aimed to investigate the bond strength of silicone elastomers to conventional and alternative 3-dimensional printing resin materials and the effect of artificial aging. The bond strength of seven resin substructure materials to a maxillofacial silicone was tested using the 180° peel test without artificial aging and after artificial aging in 14 groups. Test specimens composed of a silicone elastomer bonded to a substructure which were prepared according to ASTM D903-98 standard. A total of 70 specimens were prepared with a maxillofacial silicone bonded with a primer to substructures made of chemically polymerized clear acrylic, heat-polymerized clear acrylic and heat-polymerized pink acrylic, 3-dimensional surgical guide, 3-dimensional denture base, 3-dimensional polyetherketoneketone, and 3-dimensional polyetheretherketone resins (n = 10). Half of the specimens (n = 5 per group) were aged in an environmental chamber (Ci4400 Weather-Ometer, Atlas, Inc., USA) to assess the impact of 360 h of accelerated artificial aging. Peel bond strength values were analyzed using two-way ANOVA and post-hoc comparisons with Bonferroni correction (α = 0.05). Bond failures were classified using confocal microscopy. Substructure material, artificial aging, and their interaction significantly affected peel bond strength (p < 0.001). Polyetherketoneketone and polyetheretherketone exhibited significantly lower mean bond strength in non-aged groups (p < 0.05). Within the aged groups, surgical guide and denture base resins demonstrated significantly higher bond strength (p < 0.05). The most common failure type was mixed (71.4%), followed by adhesive (20%), cohesive (9%). Three-dimensional printed surgical guide resin and denture base resin specimens showed higher mean bond strength after artificial aging compared to commonly used conventional resin substructures and three- dimensional printed polyetherketoneketone and polyetheretherketone.


  • Top Cited Papers
    Open Access

    Comparative evaluation of responses from DeepSeek-R1, ChatGPT-o1, ChatGPT-4, and dental GPT chatbots to patient inquiries about dental and maxillofacial prostheses

    by Tuğgen Özcivelek, Berna Özcan

    Artificial intelligence chatbots have the potential to inform and guide patients by providing human-like responses to questions about dental and maxillofacial prostheses. Information regarding the accuracy and qualifications of these responses is limited. This in-silico study aimed to evaluate the accuracy, quality, readability, understandability, and actionability of the responses from DeepSeek-R1, ChatGPT-o1, ChatGPT-4, and Dental GPT chatbots. Four chatbots were queried about 35 of the most frequently asked patient questions about their prostheses. The accuracy, quality, understandability, and actionability of the responses were assessed by two prosthodontists using five-point Likert scale, Global Quality Score, and Patient Education Materials Assessment Tool for Printed Materials scales, respectively. Readability was scored using the Flesch-Kincaid Grade Level and Flesch Reading Ease. The agreement was assessed using the Cohen Kappa test. Differences between chatbots were analyzed using the Kruskal-Wallis test, one-way ANOVA, and post-hoc tests. Chatbots showed a significant difference in accuracy and readability (p <.05). Dental GPT recorded the highest accuracy score, whereas ChatGPT-4 had the lowest. DeepSeek-R1 performed best, while Dental GPT had the lowest performance in readability. Quality, understandability, actionability, and reader education scores did not show significant differences. While accuracy may vary among chatbots, the domain-specific trained AI tool and ChatGPT-o1 demonstrated superior accuracy. Even if accuracy is high, misinformation in health care can have significant consequences. Enhancing the readability of the responses is essential, and chatbots should be chosen accordingly. The accuracy and readability of information from chatbots should be monitored for public health.


  • Open Access

    CERRAHİ PLAK KULLANIMI İLE GERÇEKLEŞTİRİLEN FLEPSİZ İMPLANT CERRAHİSİYLE TÜM AĞIZ REHABİLİTASYONU: VAKA SUNUMU

    by Emine İki̇z, Ahmet Emre Uysal, Berna Özcan, Nurten Baysal

    AMAÇ: Bu çalışmanın implant cerrahisinin bilgisayar ortamında tasarlanması ve elde edilen cerrahi plaklar ile implant cerrahisinin gerçekleştirilmesidir. GEREÇ VE YÖNTEMLER : 65 yaşındaki kadın hasta kliniğimize yetersiz çiğneme fonksiyonu ve diş kayıpları şikayeti ile başvurmuştur. Yapılan intraoral ve radyografik muayenesi sonucunda implant destekli protezler ile tedavinin tamamlanmasına ve cerrahi esnasında cerrahi rehber plak kullanımına karar verilmiştir. Hastadan elde edilen BT görüntüleri eşliğinde bilgisayar ortamında implant pozisyonları planlanmış ve cerrahi gerçekleştirilmiştir. BULGULAR: Cerrahi sonrası alınan panoramik radyografide implantların istenilen vertikal konumda olmadığı fark edilmiş ve 48 saat anahtarı (ITI, Strauman, İsviçre) kullanılarak kemik seviyesine getirilmiştir. İmplant yerleşiminden 3 ay sonra tüm ağız rehabilitasyonu tamamlanmıştır. SONUÇ: Osseointegrasyon başlamadan 48 saat içerisinde implant pozisyonları değiştirilebilir. Yapılan tedavi sonucunda hasta yetersiz olan çiğneme fonksiyonunu ve estetik görünümünü tekrar kazanmıştır. ANAHTAR KELİMELER: Bilgisayar destekli implantoloji, dental implant, flepsiz cerrahi