Misaki Deguchi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Misaki Deguchi has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Genki Tsukamoto
Steel Research Laboratories, Nippon Steel Corporation
1 shared publication - Hideharu Nakashima
Faculty of Engineering Sciences, Kyushu University, Kasuga, Fukuoka, Japan
1 shared publication - Masatoshi Mitsuhara
Faculty of Engineering Sciences, Kyushu University
1 shared publication - Shigeto Yamasaki
Department of Materials, Kyushu University
1 shared publication - Tomonori Kunieda
Steel Research Laboratories, Nippon Steel Corporation, 20-1 Shintomi, Futtsu, Chiba 293-0011, Japan
1 shared publication
Latest Publications
- Open Access
Tensile Deformation Behaviors of Pure Ti with Different Grain Sizes under Wide-Range of Strain Rate
In this study, pure titanium equivalent to Grade 1 was subjected to tensile tests at strain rates ranging from 10−6 to 100 s−1 to investigate the relationship between its mechanical properties and its twinning and slip. Deformation properties and microstructures of samples having average grain sizes of 210 μm (Ti-210), 30 μm (Ti-30), and 5 μm (Ti-5) were evaluated. With increasing strain rates, the 0.2% proof stress and ultimate tensile strength increased for all samples; the fracture strain increased for Ti-210, decreased for Ti-5, and changed negligibly for Ti-30. Comparing high (100 s−1) and low (10−6 s−1) strain rates, twinning occurred more frequently in Ti-30 and Ti-210 at high strain rates, but the frequency did not change in Ti-5. The frequency of 1st order pyramidal slip tended to be higher in Ti-30 and Ti-5 at low strain rates. The higher ductility exhibited by Ti-210 at high strain rates was attributed to the high frequency of twinning. In contrast, the higher ductility of Ti-5 at low strain rates was attributed to the activity of the 1st order pyramidal slip.
Open AccessTensile Deformation Behaviors of Pure Ti with Different Grain Sizes under Wide-Range of Strain Rate
In this study, pure titanium equivalent to Grade 1 was subjected to tensile tests at strain rates ranging from 10−6 to 100 s−1 to investigate the relationship between its mechanical properties and its twinning and slip. Deformation properties and microstructures of samples having average grain sizes of 210 μm (Ti-210), 30 μm (Ti-30), and 5 μm (Ti-5) were evaluated. With increasing strain rates, the 0.2% proof stress and ultimate tensile strength increased for all samples; the fracture strain increased for Ti-210, decreased for Ti-5, and changed negligibly for Ti-30. Comparing high (100 s−1) and low (10−6 s−1) strain rates, twinning occurred more frequently in Ti-30 and Ti-210 at high strain rates, but the frequency did not change in Ti-5. The frequency of 1st order pyramidal slip tended to be higher in Ti-30 and Ti-5 at low strain rates. The higher ductility exhibited by Ti-210 at high strain rates was attributed to the high frequency of twinning. In contrast, the higher ductility of Ti-5 at low strain rates was attributed to the activity of the 1st order pyramidal slip.