Martí Ramis
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Martí Ramis has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Mariona Coll
Institut de Ciència de Materials de Barcelona (ICMAB‐CSIC) Cerdanyola del Vallès Spain
5 shared publications - Pol Salles
European Synchrotron Radiation Facility (ESRF) Grenoble France
3 shared publications - Dae-Sung Park
Department of Energy Storage and Conversion Technical University of Denmark Kongens Lyngby Denmark
2 shared publications - Jakub Drnec
European Synchrotron Radiation Facility, ID 31 Beamline, BP 220, F-38043, Grenoble, France
2 shared publications - Jose Manuel Caicedo
Catalan Institute of Nanoscience and Nanotechnology (ICN2) CSIC and BIST Bellaterra Spain
2 shared publications - Nini Pryds
Technical University of Denmark
2 shared publications
Latest Publications
- Open Access
Spatially Resolved Strain Mapping In Flexible Oxide Membranes
Strain engineering in single‐crystalline oxide membranes offers a versatile platform to tailor functional properties beyond thin films or bulk materials. However, accurately determining strain transfer and distribution within these membranes remains challenging, limiting direct correlations between structural distortion and functional response and hindering the rational design of flexible devices. Here, high‐resolution synchrotron x‐ray diffraction is used for in situ monitoring of strain in (001)‐oriented membranes on flexible polymer substrates under stretching and bending. This approach enables quantitative determination of in‐plane strain as both macroscopic averages and spatially resolved maps. Macroscopic analysis shows that strain transfer is most efficient in thinner films and leads to distinct strain symmetries under stretching and bending. Spatially resolved measurements reveal local strain heterogeneity that increases with applied stress beyond macroscopic averages. Correlating strain distribution with estimated Curie temperature shifts illustrates how such heterogeneity could translate into spatially non‐uniform functional behavior. Additionally, the setup's sensitivity to crystallographic orientation enables analysis of stacked and twisted architectures, where interlayer strain transfer is effective yet attenuated with distance from the substrate. Altogether, this framework establishes a robust approach for probing oxide membranes, opening pathways toward strain‐engineered flexible devices, multilayer heterostructures, and operando investigations.
Open AccessSpatially Resolved Strain Mapping In Flexible Oxide Membranes
Strain engineering in single‐crystalline oxide membranes offers a versatile platform to tailor functional properties beyond thin films or bulk materials. However, accurately determining strain transfer and distribution within these membranes remains challenging, limiting direct correlations between structural distortion and functional response and hindering the rational design of flexible devices. Here, high‐resolution synchrotron x‐ray diffraction is used for in situ monitoring of strain in (001)‐oriented membranes on flexible polymer substrates under stretching and bending. This approach enables quantitative determination of in‐plane strain as both macroscopic averages and spatially resolved maps. Macroscopic analysis shows that strain transfer is most efficient in thinner films and leads to distinct strain symmetries under stretching and bending. Spatially resolved measurements reveal local strain heterogeneity that increases with applied stress beyond macroscopic averages. Correlating strain distribution with estimated Curie temperature shifts illustrates how such heterogeneity could translate into spatially non‐uniform functional behavior. Additionally, the setup's sensitivity to crystallographic orientation enables analysis of stacked and twisted architectures, where interlayer strain transfer is effective yet attenuated with distance from the substrate. Altogether, this framework establishes a robust approach for probing oxide membranes, opening pathways toward strain‐engineered flexible devices, multilayer heterostructures, and operando investigations.
- Open Access
- 7 August 2025
- Published by Wiley in Advanced Physics Research
- Vol. 4 (10)
Strain Engineering of Complex Oxide Membranes on Flexible Metallic Support
Controlling material functionalities via external stimuli is a cornerstone of modern science and technology. One effective strategy involves tuning mechanical strain, which can be induced through lattice mismatch, electric fields, or applied mechanical force. Recent advances in fabricating freestanding single‐crystalline complex oxide membranes have opened new opportunities for integrating these materials onto previously incompatible platforms such as metals and flexible polymers for next‐generation device applications. A key step in strain engineering is understanding and controlling the integration of such materials with flexible substrates. In this study, the integration and adhesion of freestanding single‐crystalline La0.7Sr0.3MnO3 (LSMO(001)) membranes onto metallic surfaces (Au, Pt, and TiN) coated on flexible polymer substrates is demonstrated. It is found that the choice of metal underlayer significantly influences the ability to strain the membrane. Using TiN‐coated polymer support, a uniform strain of ≈1% in LSMO membranes, along with strong adhesion between the membrane and substrate, is achieved. Theoretical calculations reveal that strong Ti─O bonding and compact in‐plane lattice matching at the LSMO(001)/TiN(111) interface lower the interface formation energy compared to noble metals. These findings offer valuable insights for selecting suitable platforms to apply external mechanical stress to freestanding oxide membranes, facilitating their integration into flexible electronic systems.
- 7 August 2025
- Published by Wiley in Advanced Physics Research
- Vol. 4 (10)
Open AccessStrain Engineering of Complex Oxide Membranes on Flexible Metallic Support
Controlling material functionalities via external stimuli is a cornerstone of modern science and technology. One effective strategy involves tuning mechanical strain, which can be induced through lattice mismatch, electric fields, or applied mechanical force. Recent advances in fabricating freestanding single‐crystalline complex oxide membranes have opened new opportunities for integrating these materials onto previously incompatible platforms such as metals and flexible polymers for next‐generation device applications. A key step in strain engineering is understanding and controlling the integration of such materials with flexible substrates. In this study, the integration and adhesion of freestanding single‐crystalline La0.7Sr0.3MnO3 (LSMO(001)) membranes onto metallic surfaces (Au, Pt, and TiN) coated on flexible polymer substrates is demonstrated. It is found that the choice of metal underlayer significantly influences the ability to strain the membrane. Using TiN‐coated polymer support, a uniform strain of ≈1% in LSMO membranes, along with strong adhesion between the membrane and substrate, is achieved. Theoretical calculations reveal that strong Ti─O bonding and compact in‐plane lattice matching at the LSMO(001)/TiN(111) interface lower the interface formation energy compared to noble metals. These findings offer valuable insights for selecting suitable platforms to apply external mechanical stress to freestanding oxide membranes, facilitating their integration into flexible electronic systems.
- 16 August 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (35) , 13809-13815
Epitaxially grown single-crystalline SrTiO3 membranes using a solution-processed, amorphous SrCa2Al2O6 sacrificial layer
Water-soluble sacrificial layers using solution processed, amorphous SrCa2Al2O6 sacrificial layer has been used for creating free-standing single-crystalline perovskite oxide membranes.
- 16 August 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (35) , 13809-13815
Epitaxially grown single-crystalline SrTiO3 membranes using a solution-processed, amorphous SrCa2Al2O6 sacrificial layer
Water-soluble sacrificial layers using solution processed, amorphous SrCa2Al2O6 sacrificial layer has been used for creating free-standing single-crystalline perovskite oxide membranes.
- Open Access
- 5 July 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (28) , 36796-36803
Unfolding the Challenges To Prepare Single Crystalline Complex Oxide Membranes by Solution Processing
The ability to prepare single crystalline complex oxide freestanding membranes has opened a new playground to access new phases and functionalities not available when they are epitaxially bound to the substrates. The water-soluble Sr3Al2O6 (SAO) sacrificial layer approach has proven to be one of the most promising pathways to prepare a wide variety of single crystalline complex oxide membranes, typically by high vacuum deposition techniques. Here, we present solution processing, also named chemical solution deposition (CSD), as a cost-effective alternative deposition technique to prepare freestanding membranes identifying the main processing challenges and how to overcome them. In particular, we compare three different strategies based on interface and cation engineering to prepare CSD (00l)-oriented BiFeO3 (BFO) membranes. First, BFO is deposited directly on SAO but forms a nanocomposite of Sr-Al-O rich nanoparticles embedded in an epitaxial BFO matrix because the Sr-O bonds react with the solvents of the BFO precursor solution. Second, the incorporation of a pulsed laser deposited La0.7Sr0.3MnO3 (LSMO) buffer layer on SAO prior to the BFO deposition prevents the massive interface reaction and subsequent formation of a nanocomposite but migration of cations from the upper layers to SAO occurs, making the sacrificial layer insoluble in water and withholding the membrane release. Finally, in the third scenario, a combination of LSMO with a more robust sacrificial layer composition, SrCa2Al2O6 (SC2AO), offers an ideal building block to obtain (001)-oriented BFO/LSMO bilayer membranes with a high-quality interface that can be successfully transferred to both flexible and rigid host substrates. Ferroelectric fingerprints are identified in the BFO film prior and after membrane release. These results show the feasibility to use CSD as alternative deposition technique to prepare single crystalline complex oxide membranes widening the range of available phases and functionalities for next-generation electronic devices.
- 5 July 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (28) , 36796-36803
Open AccessUnfolding the Challenges To Prepare Single Crystalline Complex Oxide Membranes by Solution Processing
The ability to prepare single crystalline complex oxide freestanding membranes has opened a new playground to access new phases and functionalities not available when they are epitaxially bound to the substrates. The water-soluble Sr3Al2O6 (SAO) sacrificial layer approach has proven to be one of the most promising pathways to prepare a wide variety of single crystalline complex oxide membranes, typically by high vacuum deposition techniques. Here, we present solution processing, also named chemical solution deposition (CSD), as a cost-effective alternative deposition technique to prepare freestanding membranes identifying the main processing challenges and how to overcome them. In particular, we compare three different strategies based on interface and cation engineering to prepare CSD (00l)-oriented BiFeO3 (BFO) membranes. First, BFO is deposited directly on SAO but forms a nanocomposite of Sr-Al-O rich nanoparticles embedded in an epitaxial BFO matrix because the Sr-O bonds react with the solvents of the BFO precursor solution. Second, the incorporation of a pulsed laser deposited La0.7Sr0.3MnO3 (LSMO) buffer layer on SAO prior to the BFO deposition prevents the massive interface reaction and subsequent formation of a nanocomposite but migration of cations from the upper layers to SAO occurs, making the sacrificial layer insoluble in water and withholding the membrane release. Finally, in the third scenario, a combination of LSMO with a more robust sacrificial layer composition, SrCa2Al2O6 (SC2AO), offers an ideal building block to obtain (001)-oriented BFO/LSMO bilayer membranes with a high-quality interface that can be successfully transferred to both flexible and rigid host substrates. Ferroelectric fingerprints are identified in the BFO film prior and after membrane release. These results show the feasibility to use CSD as alternative deposition technique to prepare single crystalline complex oxide membranes widening the range of available phases and functionalities for next-generation electronic devices.
- Open Access
- 15 June 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 33 (41)
On the Role of the Sr3−xCaxAl2O6 Sacrificial Layer Composition in Epitaxial La0.7Sr0.3MnO3 Membranes
The possibility to fabricate freestanding single crystal complex oxide films has raised enormous interest to be integrated in next‐generation electronic devices envisaging distinct and novel properties that can deliver unprecedented performance improvement compared to traditional semiconductors. The use of the water‐soluble Sr3Al2O6 (SAO) sacrificial layer to detach the complex oxide film from the growth substrate has significantly expanded the complex oxide perovskite membranes library. Nonetheless, the extreme water sensitivity of SAO hinders its manipulation in ambient conditions and restricts the deposition approaches to those using high vacuum. This study presents a pioneering study on the role of Ca‐substitution in solution processed SAO (Sr3−xCaxAl2O6 with x ⩽ 3) identifying a noticeable improvement on surface film crystallinity preserving a smooth surface morphology while favoring the manipulation in a less‐restricted ambient conditions. Then, the study focuses on the effect of the sacrificial composition on the subsequent ex situ deposition of La0.7Sr0.3MnO3 (LSMO) by pulsed laser deposition, to obtain epitaxial films with a variable degree of strain. Finally, epitaxial and strain‐free LSMO membranes with metal‐insulator transition at 290 K are delivered. This study offers a hybrid and versatile approach to prepare and easily manipulate crystalline perovskite oxide membranes by facilitating ex situ growth on SAO‐based sacrificial layer.
- 15 June 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 33 (41)
Open AccessOn the Role of the Sr3−xCaxAl2O6 Sacrificial Layer Composition in Epitaxial La0.7Sr0.3MnO3 Membranes
The possibility to fabricate freestanding single crystal complex oxide films has raised enormous interest to be integrated in next‐generation electronic devices envisaging distinct and novel properties that can deliver unprecedented performance improvement compared to traditional semiconductors. The use of the water‐soluble Sr3Al2O6 (SAO) sacrificial layer to detach the complex oxide film from the growth substrate has significantly expanded the complex oxide perovskite membranes library. Nonetheless, the extreme water sensitivity of SAO hinders its manipulation in ambient conditions and restricts the deposition approaches to those using high vacuum. This study presents a pioneering study on the role of Ca‐substitution in solution processed SAO (Sr3−xCaxAl2O6 with x ⩽ 3) identifying a noticeable improvement on surface film crystallinity preserving a smooth surface morphology while favoring the manipulation in a less‐restricted ambient conditions. Then, the study focuses on the effect of the sacrificial composition on the subsequent ex situ deposition of La0.7Sr0.3MnO3 (LSMO) by pulsed laser deposition, to obtain epitaxial films with a variable degree of strain. Finally, epitaxial and strain‐free LSMO membranes with metal‐insulator transition at 290 K are delivered. This study offers a hybrid and versatile approach to prepare and easily manipulate crystalline perovskite oxide membranes by facilitating ex situ growth on SAO‐based sacrificial layer.