Jia-Hao Deng
Research Subjects
Jia-Hao Deng has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Ben-Xin Wang
Jiangnan University
2 shared publications - Han Xiong
Chongqing University
2 shared publications - Dongping Xiao
School of Electrical Engineering, Chongqing University, Chongqing, China
1 shared publication Huai-Qing Zhang
School of Electrical Engineering, Chongqing University 2 , Chongqing 40044, China
1 shared publicationQiang Yang
Norinco Group Chongqing Tiema Industries Group Company Ltd., Chongqing, China
1 shared publication- Qiang Yang
Norinco Group Chongqing Tiema Industries Group Co., Ltd. 2 , Chongqing 400050
1 shared publication
Latest Publications
- 26 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (21) , 39441-39449
Design of a Broadband Microwave Power Detector Based on Metasurfaces With Linear Response and Thermal Sensing
In this study, a broadband microwave power detector based on an energy-harvesting metasurface is proposed, enabling efficient detection of incident microwave power density via electromagnetic-to-thermal energy conversion. The device comprises a resonant ring, a dielectric substrate, a metallic reflective layer, and four 50 Ω load resistors. By leveraging a multi-mode resonant structure, the detector achieves broadband absorption exceeding 80% over the frequency range of 2.284–5.945 GHz, with absorption rates exceeding 90% within the 2.482–5.893 GHz range. Notably, high absorption efficiencies of 88.59% and 97.21% are achieved at the key frequencies of 2.45 GHz and 5.8 GHz, respectively, with an average energy harvesting efficiency reaching 98%. Simulation results confirm a strong linear correlation between the temperature of the load resistors and the incident power density, with response rates of 1.12 and 1.33 K/(mW/cm²) at 2.45 GHz and 5.8 GHz, respectively—substantially outperforming traditional single-frequency detectors. Moreover, the device maintains high robustness under polarization angles ranging from 0° to 60° and varying low-frequency incidence angles. Compared to conventional detection schemes, the proposed design offers distinct advantages, including structural simplicity, low cost, and high scalability. When combined with thermal imaging technology, the system enables contactless and visualized monitoring of microwave power distribution, providing a practical and efficient power detection solution for large-scale wireless energy transmission systems such as space-based solar power stations.
- 26 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (21) , 39441-39449
Design of a Broadband Microwave Power Detector Based on Metasurfaces With Linear Response and Thermal Sensing
In this study, a broadband microwave power detector based on an energy-harvesting metasurface is proposed, enabling efficient detection of incident microwave power density via electromagnetic-to-thermal energy conversion. The device comprises a resonant ring, a dielectric substrate, a metallic reflective layer, and four 50 Ω load resistors. By leveraging a multi-mode resonant structure, the detector achieves broadband absorption exceeding 80% over the frequency range of 2.284–5.945 GHz, with absorption rates exceeding 90% within the 2.482–5.893 GHz range. Notably, high absorption efficiencies of 88.59% and 97.21% are achieved at the key frequencies of 2.45 GHz and 5.8 GHz, respectively, with an average energy harvesting efficiency reaching 98%. Simulation results confirm a strong linear correlation between the temperature of the load resistors and the incident power density, with response rates of 1.12 and 1.33 K/(mW/cm²) at 2.45 GHz and 5.8 GHz, respectively—substantially outperforming traditional single-frequency detectors. Moreover, the device maintains high robustness under polarization angles ranging from 0° to 60° and varying low-frequency incidence angles. Compared to conventional detection schemes, the proposed design offers distinct advantages, including structural simplicity, low cost, and high scalability. When combined with thermal imaging technology, the system enables contactless and visualized monitoring of microwave power distribution, providing a practical and efficient power detection solution for large-scale wireless energy transmission systems such as space-based solar power stations.
- Top Cited PapersOpen Access
- 19 June 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 122 (25)
Polarization-insensitive composite gradient-index metasurface array for microwave power reception
A composite gradient-index metasurface (C-GM) array for microwave power reception (MPR) operating at 5.8 GHz center frequency was introduced. The array is insensitive to the polarization of incident plane waves and possesses cosine gradient modulation characteristics, which can convert the incident plane waves into surface waves focused at the center of the array. The focused surface wave energy is then collected by an omnidirectional antenna and fed back to a single rectifier for radio frequency (RF) to direct current (DC) conversion, resulting in DC output. Simulation results show that the array can fully excite surface waves under different polarized plane wave excitations, and the omnidirectional antenna has good matching characteristics with the array, achieving an energy collection efficiency of 66.52%. The array was fabricated and measured, achieving an energy reception efficiency of 59.91% and an RF-DC conversion efficiency of 34.83%, which is consistent with the simulation results. The proposed C-GM array can capture higher electromagnetic power by simply increasing its size, without the need for additional rectifiers or complex matching networks, making it a flexible and efficient MPR solution for different application scenarios.
- 19 June 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 122 (25)
Top Cited PapersOpen AccessPolarization-insensitive composite gradient-index metasurface array for microwave power reception
A composite gradient-index metasurface (C-GM) array for microwave power reception (MPR) operating at 5.8 GHz center frequency was introduced. The array is insensitive to the polarization of incident plane waves and possesses cosine gradient modulation characteristics, which can convert the incident plane waves into surface waves focused at the center of the array. The focused surface wave energy is then collected by an omnidirectional antenna and fed back to a single rectifier for radio frequency (RF) to direct current (DC) conversion, resulting in DC output. Simulation results show that the array can fully excite surface waves under different polarized plane wave excitations, and the omnidirectional antenna has good matching characteristics with the array, achieving an energy collection efficiency of 66.52%. The array was fabricated and measured, achieving an energy reception efficiency of 59.91% and an RF-DC conversion efficiency of 34.83%, which is consistent with the simulation results. The proposed C-GM array can capture higher electromagnetic power by simply increasing its size, without the need for additional rectifiers or complex matching networks, making it a flexible and efficient MPR solution for different application scenarios.