Dongyu Niu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dongyu Niu has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Huiyun Xia
Chang’an Univ
2 shared publications - Xueyan Liu
Section of Pavement Engineering, Department of Engineering Structures, Faculty of Civil Engineering and Geosciences, Delft University of Technology, Stevinweg 1, 2628 CN Delft, the Netherlands
2 shared publications - Huikun Chen
School of Materials Science and Engineering, Chang’an University, Xi’an 710061, China
1 shared publication - Jiandang Meng
Puyang Branch Office of Henan Transport Development Group Co., Ltd., Puyang 450000, China
1 shared publication - Junyan Zhang
Shaanxi Construction Engineering Eighth Construction Group Co., Ltd., Xi’an 710061, China
1 shared publication - Lifang Song
School of Materials Science and Engineering, Chang’an University, Xi’an, China
1 shared publication
Latest Publications
- 16 January 2026
- Published by Springer Nature in Materials and Structures
- Vol. 59 (2) , 46
Rheological evaluation and oxidative mechanism of aged epoxy/styrene–butadiene–styrene composite modified asphalt for crack repairing
- 16 January 2026
- Published by Springer Nature in Materials and Structures
- Vol. 59 (2) , 46
Rheological evaluation and oxidative mechanism of aged epoxy/styrene–butadiene–styrene composite modified asphalt for crack repairing
- Open Access
Influence of Reed Fiber Length and Dosage on the Properties of Reed-Fiber-Modified Bitumen and Bituminous Mortar
In order to explore the feasibility and efficacy of reed-fiber-modified bitumen (RFMB), three lengths and three dosages of reed fibers were selected to modify bitumen and bituminous mortar, while the physicochemical properties of RFMB and RFMB mortar were analyzed. In this work, FTIR spectroscopy was employed to characterize the chemical impact of fiber on bitumen. The viscidity and rheology of RFMB and the tensile strength of RFMB mortar were evaluated using a Brookfield viscometer, dynamic shear rheometer, and monotonic tensile test. The results showed that adding fibers primarily affects the physical structure rather than the chemical composition of bitumen, confirmed by FTIR spectroscopy. RFMB viscosity increased with higher fiber dosage and fiber length. Rheological evaluations showed an enhanced complex shear modulus for RFMB, suggesting improved performance at higher temperatures but increased stiffness at lower temperatures, with the latter indicating reduced flexibility. RFMB also demonstrated superior fatigue and rutting resistance, albeit with compromised stress sensitivity. Tensile tests on RFMB mortar highlighted significant improvements, especially with longer fibers, while shorter 0.4 mm fibers showed modest reinforcement effects, possibly due to uneven distribution during sample preparation.
Open AccessInfluence of Reed Fiber Length and Dosage on the Properties of Reed-Fiber-Modified Bitumen and Bituminous Mortar
In order to explore the feasibility and efficacy of reed-fiber-modified bitumen (RFMB), three lengths and three dosages of reed fibers were selected to modify bitumen and bituminous mortar, while the physicochemical properties of RFMB and RFMB mortar were analyzed. In this work, FTIR spectroscopy was employed to characterize the chemical impact of fiber on bitumen. The viscidity and rheology of RFMB and the tensile strength of RFMB mortar were evaluated using a Brookfield viscometer, dynamic shear rheometer, and monotonic tensile test. The results showed that adding fibers primarily affects the physical structure rather than the chemical composition of bitumen, confirmed by FTIR spectroscopy. RFMB viscosity increased with higher fiber dosage and fiber length. Rheological evaluations showed an enhanced complex shear modulus for RFMB, suggesting improved performance at higher temperatures but increased stiffness at lower temperatures, with the latter indicating reduced flexibility. RFMB also demonstrated superior fatigue and rutting resistance, albeit with compromised stress sensitivity. Tensile tests on RFMB mortar highlighted significant improvements, especially with longer fibers, while shorter 0.4 mm fibers showed modest reinforcement effects, possibly due to uneven distribution during sample preparation.
- Open Access
Effect of Photocatalyst on Rheological Behavior and NO Degradation Capacity of Asphalt Binder
To reduce vehicle exhaust gas pollution in transport-intensive roadways and tunnels, six types of photocatalytic asphalt binders were designed using graphite-phase carbon nitride (g-C3N4) and nanoscale titanium dioxide (nano-TiO2) particles. In this paper, the rheological behaviors and fatigue life of the nano-TiO2-modified asphalt binder (TiO2-MA) and g-C3N4-modified asphalt binder (C3N4-MA) were investigated. NO degradation capacity of six types of photocatalytic asphalt binders was characterized under visible light conditions. The results showed that TiO2-MA had more excellent rheological behaviors and rutting resistance than C3N4-MA. In addition, 4 wt% nano-TiO2 markedly improved the rheological behaviors and rutting resistance of MA compared to other dosages. TiO2-MA exhibited higher fatigue resistance. The fatigue life of TiO2-MA with 4 wt% nano-TiO2 was increased to 234.1% at 2.5% strain and 242.5% at 5% strain, respectively, compared to base asphalt binder (BA). C3N4-MA had better NO degradation capacity than TiO2-MA. Meanwhile, the NO degradation efficiency of C3N4-MA reached 17.8% with 5 wt% g-C3N4.
Open AccessEffect of Photocatalyst on Rheological Behavior and NO Degradation Capacity of Asphalt Binder
To reduce vehicle exhaust gas pollution in transport-intensive roadways and tunnels, six types of photocatalytic asphalt binders were designed using graphite-phase carbon nitride (g-C3N4) and nanoscale titanium dioxide (nano-TiO2) particles. In this paper, the rheological behaviors and fatigue life of the nano-TiO2-modified asphalt binder (TiO2-MA) and g-C3N4-modified asphalt binder (C3N4-MA) were investigated. NO degradation capacity of six types of photocatalytic asphalt binders was characterized under visible light conditions. The results showed that TiO2-MA had more excellent rheological behaviors and rutting resistance than C3N4-MA. In addition, 4 wt% nano-TiO2 markedly improved the rheological behaviors and rutting resistance of MA compared to other dosages. TiO2-MA exhibited higher fatigue resistance. The fatigue life of TiO2-MA with 4 wt% nano-TiO2 was increased to 234.1% at 2.5% strain and 242.5% at 5% strain, respectively, compared to base asphalt binder (BA). C3N4-MA had better NO degradation capacity than TiO2-MA. Meanwhile, the NO degradation efficiency of C3N4-MA reached 17.8% with 5 wt% g-C3N4.
- Open Access
- 16 June 2023
- Published by Elsevier in Computer-Aided Civil and Infrastructure Engineering
- Vol. 39 (13) , 2054-2070
Effective contact texture region aware pavement skid resistance prediction via convolutional neural network
- 16 June 2023
- Published by Elsevier in Computer-Aided Civil and Infrastructure Engineering
- Vol. 39 (13) , 2054-2070
Open AccessEffective contact texture region aware pavement skid resistance prediction via convolutional neural network
- Open Access
Surface Modification of Steel Slag Aggregate for Engineering Application in Asphalt Mixture
The proper disposal of steel slag has always been a great challenge for the metallurgical industry in China and around the world. In this work, the steel slag aggregate (SSA) was surface pretreated (PSSA) and applied into asphalt mixture. The adhesive behavior between the bitumen and five different types of aggregates (i.e., limestone, diorite, diabase, SSA, PSSA) were evaluated based on the contact angle and binder bond strength tests. The pavement performance of three asphalt mixtures which contain normal aggregate, SSA and PSSA respectively, was analyzed by Marshall stability test, wheel-tracking rutting test, low-temperature bending creep test and water sensitivity test. The results showed that surface modification can improve the surface properties of SSA, reduce its contact angle with bitumen, and eventually lead to the improvement of adhesion between them. In addition to the satisfied low-temperature properties, PSSA was found to significantly improve the anti-rutting property and reduce the water sensitivity of asphalt mixture. This work is expected to promote an alternative application for recycling of SSA in pavement engineering.
Open AccessSurface Modification of Steel Slag Aggregate for Engineering Application in Asphalt Mixture
The proper disposal of steel slag has always been a great challenge for the metallurgical industry in China and around the world. In this work, the steel slag aggregate (SSA) was surface pretreated (PSSA) and applied into asphalt mixture. The adhesive behavior between the bitumen and five different types of aggregates (i.e., limestone, diorite, diabase, SSA, PSSA) were evaluated based on the contact angle and binder bond strength tests. The pavement performance of three asphalt mixtures which contain normal aggregate, SSA and PSSA respectively, was analyzed by Marshall stability test, wheel-tracking rutting test, low-temperature bending creep test and water sensitivity test. The results showed that surface modification can improve the surface properties of SSA, reduce its contact angle with bitumen, and eventually lead to the improvement of adhesion between them. In addition to the satisfied low-temperature properties, PSSA was found to significantly improve the anti-rutting property and reduce the water sensitivity of asphalt mixture. This work is expected to promote an alternative application for recycling of SSA in pavement engineering.