CXChao Xiong

Chao Xiong

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Chao Xiong has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Compressive behavior and energy absorption of SLM-fabricated diamond-TPMS tube reinforced with bionic spider-web ribs

    by Jingxiong Zhang, Guangsheng Liu, Chao Xiong, Kaibo Cui, Junhui Yin, Xiujie Zhu, Jialong Liu

    Aluminum alloy thin-walled tubes are widely used in lightweight energy-absorbing structures owing to their high specific strength and crashworthiness. However, Diamond-type triply periodic minimal surface (TPMS) tubes may exhibit unstable penetrating 45° shear band deformation under axial compression. To mitigate this instability, a bionic spider-web rib-reinforced Diamond-TPMS tube (D-BCT) is proposed based on spatial–structural partitioning, dividing the annular region into an inner rib-reinforced region and an outer Diamond-TPMS region. Three specimens of each structure were fabricated from AlSi10Mg alloy by selective laser melting and tested under quasi-static axial compression. Within a common 0–15 mm evaluation displacement, the D-BCT achieved a mean specific energy absorption (SEA) of 38.74 J/g, approximately 9.9% higher than that of the conventional Diamond-TPMS tube (D-CT), while reducing the mean peak crushing force by approximately 30.7% and increasing the mean crushing force efficiency (CFE) from 64.66% to 74.92%. Compared with D-CT, D-BCT exhibited progressive crushing and buckling rather than a penetrating shear band, together with a more stable plateau response. These results suggest that spatial–structural partitioning is a promising approach for improving the quasi-static crushing stability of Diamond-TPMS tubes.

  • Thermal protective and hydrophobic coating on polyimide resin matrix composites surface for improved aging resistance

    by Zhaoyang Fan, Chao Xiong, Junhui Yin, Youchun Zou, Yu Zhang, Xiujie Zhu

    Polyimide composites are easily degraded in high temperature and high humidity environments for long service, which reduces their reliability and stability in aerospace, electronic components, weapons, and other fields. In this paper, the inorganic and organic multiphase double‐layer coating was prepared. The insulating layer was made of vinyl polysilazane resin as the base material and hollow glass microspheres as the filler. The hydrophobic layer consisted of polydimethylsiloxane as the base material, hollow phenolic microspheres, and nano‐TiO2 as the filler. The heat resistance, hydrophobic properties, and aging resistance of the coated polyimide resin matrix composites were studied. The results showed that the thickness of the double‐layer coating was about 200 μm. Under the 200°C thermal insulation test, the maximum temperature drop can be achieved at 59.7°C. After adding 5 wt% TiO2, the static contact angle of composites was increased from 86.2° to 127.7°. Significantly, the hydrophobic performance was improved by 48.1%, which was due to the construction of micro‐nano structures in the surface layer coating. In the accelerated hydrothermal aging tests, the bending properties of coated composite materials can be improved by 8.5%, 3.2%, and 8.7% in water, alkali, and acid environments, respectively. The moisture absorption of glass fiber and the pyrolysis of polyimide led to the degradation of the mechanical properties. The existence of heat‐resistant and hydrophobic coating could effectively eliminate this adverse effect, which was of great significance for polyimide composites to cope with various service environments.Highlights: A novel coating consisting of thermal insulating and hydrophobic layers was developed on glass fiber reinforced polyimide composites (G/PI) composites. The maximum temperature drop of coating can be achieved at 59.7°C. The static contact angle of coated G/PI composites was increased from 86.2° to 127.7°. In the aging tests, the protective effect of the coating resulted in improved mechanical strengths of G/PI composites. The microscopic damage morphology was performed to analyze the anti‐aging properties of the coating.


  • Preparation, testing, and design of a radar‐absorption polymethacrylimide foam

    by Shijun Song, Jie Yuan, Rongxia Duan, Chao Xiong, Junhui Yin, Fang Zhao, Chao Han, Zhaoshu Yang, Lei Liu

    This article presents a new radar‐absorbing polymethacrylimide (RAPMI) foam, measures the electromagnetic (EM) parameters of the foam, and establishes mechanical prediction models. The reflection loss (RL) curves of foams with different thicknesses and absorbent weight ratios (wt%) were analyzed along with the shear and compression behaviors of the RAPMI foam. Gibson models of the RAPMI foam were then established. The parametric effects of the absorption performance of multilayered RAPMI foams were analyzed using multimedia transmission‐line theory. A numerically designed RAPMI foam exhibited excellent EM performance while retaining the outstanding mechanical properties of the original foam. The laminated foam can theoretically achieve a full‐band effective absorption (RL ≤ −10 dB) of 2–18 GHz with a minimal thickness of 33.1 mm.


  • Open Access

    Fabrication, design, and optimization of hierarchical composite Kagome honeycomb sandwich structure under uniaxial compression

    by Shijun Song, Chao Xiong, Junhui Yin, Zhaoshu Yang, Lu Wang

    In this study, a hierarchical composite Kagome honeycomb sandwich (HCKHS) structure was manufactured based on the interlocking method, and its uniaxial compression performance was explored. Through experiments, the compressive strength, stiffness, energy absorption, and failure process of HCKHS specimens of seven different sizes were determined and compared. Mechanical analytical models were established, and the variation trend in the specific strength was predicted and compared with those of other advanced sandwich structures. The size effect of the HCKHS specimens was analyzed. The influence of a single variable on the core modulus, failure strength, and failure modes was discussed, and failure mechanism maps were drawn. The structure was optimized based on the maximum specific strength and engineering application, and the optimal size design ratio was obtained. The results showed that the HCKHS specimens exhibited excellent compressive properties with a convenient manufacturing process, making them suitable for lightweight applications in engineering. The optimization ideas presented herein are also applicable to other two-dimensional hierarchical or normal composite honeycomb sandwich structures with diamond, triangular, and hexagonal shapes.


  • Three-point bending characteristics of all-composite sandwich panels with different core configurations

    by Xiujie Zhu, Chao Xiong, Junhui Yin, Yuhang Qin, Haitao Sun, Kaibo Cui, Youchun Zou, Huiyong Deng

    With cores of the hexagonal honeycomb (HH), staggered corrugated lattice (SCL), bidirectional corrugated lattice (BCL), reinforced hexagonal honeycomb (RHH), and reinforced staggered corrugated lattice (RSCL) made by cutting, bonding, arranging and weaving the trapezoidal corrugation (TC) formed by mold hot pressing, six types of composite sandwich panels of the same macro size were proposed. The failure processes of the six sandwich panels in three-point bending experiments were compared and analyzed, and the effects of core configuration and reinforced stiffener on the bending response were evaluated. A general analytical model was established to predict the bending stiffness and failure mode of six sandwich panels, which was also visually presented by a three-dimensional numerical model. The numerical and experimental results validated the effectiveness of the analytical model. The effects of ply parameters and corrugated sizes on bending responses were studied by a combing application of experiment, analytical and numerical models. The three-dimensional failure mechanism maps were displayed to evaluate the failure mode and failure load. The longitudinal discontinuity of the bonding zone of the core could significantly weaken the bending performance and bonding strength of BCL, SCL, RSCL, and HH. The peak load of SCL and HH was enhanced by 45.97% and 60.29%, respectively, by setting stiffeners. Both RHH and TC could achieve bending stiffness of more than 3.5 kN·mm−1, while the failure load of the latter could be up to 25 kN. The design parameter space of bending stiffness, failure load with respect to ply orientation angle, core wall thickness, corrugated web angle, and horizontal segment length was provided intuitively.


  • Fabrication and mechanical behavior of an all‐composite interlocked triangular honeycomb sandwich structure: Experimental investigation and numerical analysis

    by Shijun Song, Chao Xiong, Junhui Yin, Xiaoyong Kang

    The interlocked composite honeycomb structures have high specific strength and specific stiffness, convenient processing, and low cost with great application potential in aerospace, marine, construction, and civil fields. In this study, an effective method is proposed for manufacturing an all‐composite interlocked triangular honeycomb (CITH), and the quasi‐static mechanical properties of the honeycomb and the corresponding sandwich structure (CITHSS) are examined. Through experimental tests, the basic mechanical properties of CITH and CITHSS are analyzed. Further, the effective strength and stiffness coefficient of the slotted carbon sheets constituting CITH are measured through tensile experiments. The in‐plane stiffness model of CITH is derived based on the continuous equivalent method. The failure strength models of CITHSS are also established. At the same time, the failure modes under three‐point bending and edge compression loads are predicted. The experimental results reveal that compared with the interlocked Kagome and square honeycomb, the specific strength of CITH is increased by 27.8% and 24.4%, respectively. Further, the specific stiffness is increased by 148.4% and 8.3%, respectively. Compared with aluminum honeycomb sandwich, the compressive and bending specific strengths of CITHSS are increased by more than 46.5% and 15.2%, respectively. The debonding failure and edge effect are found to be the main weakness of CITHSS. Overall, CTIH and CITHSS exhibit excellent mechanical properties and create feasible options for processing complex multifunctional composite honeycombs by interlocking technology.


  • Mechanical property of all-composite diamond honeycomb sandwich structure based on interlocking technology: Experimental tests and numerical analysis

    by Shijun Song, Chao Xiong, Junhui Yin, Sa Zhang

    In this study, a three-rib intersecting composite diamond honeycomb structure is fabricated by interlocking technology. The mechanical properties of the composite interlocked diamond honeycomb (CIDH) and corresponding sandwich structure (CIDHSS) are experimentally tested. The stiffness, strength, and failure characteristics of CIDH and CIDHSS are analyzed. The results show that CIDH has better mechanical properties than the interlocked Kagome and square honeycombs. The edge effect limits the edge compressive strength and stiffness of CIDH. Debonding is the main failure mode that limits both bending and compressive strength of CIDHSS. The reinforced plate added to the edge effectively improves the anti-debonding ability.


  • Research on Dynamic Cumulative Damage Effect of Metal Rubber and Stress Wave Propagation Characteristics of Layered Composite Structure

    by Youchun Zou, Chao Xiong, Junhui Yin, Kaibo Cui, Huiyong Deng, Xiujie Zhu, Shijun Song

    The development of protective materials and structures is of great significance for improving the impact resistance, penetration resistance and spalling resistance of military equipment. At present, the layered composite structure has been widely used due to its good protective performance. In this paper, a special elastic porous material-metal rubber (MR) with excellent cushioning and damping properties was used to prepare high-performance layered composite structures. To begin with, the dynamic mechanical response and the dynamic cumulative damage effect of MR were studied through Split-Hopkinson Pressure Bar (SHPB) tests. Then, the failure form and stress wave propagation characteristics of the layered composite structures were investigated through SHPB tests and finite element method. The results show that repeated impacts can enhance the compactness of MR, thereby increasing the ultimate bearing capacity and energy absorption capacity, which is beneficial for MR to resist repeated impacts. The MR in composite structures can reduce ceramic damage, attenuate stress wave and smooth stress distribution. The titanium alloy on the back of the ceramic will aggravate the damage of the ceramic, and ultra-high molecular weight polyethylene on the back of the ceramic provides cushioning for the ceramic. Therefore, the impact resistance of the composite structure can be improved by adding MR and the reasonable arrangement of materials, and the SiC/UHMWPE/MR/TC4 composite structure has relatively reasonable stress distribution and better protection performance.