Compressive behavior and energy absorption of SLM-fabricated diamond-TPMS tube reinforced with bionic spider-web ribs
- 29 October 2026
- journal article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Abstract
Aluminum alloy thin-walled tubes are widely used in lightweight energy-absorbing structures owing to their high specific strength and crashworthiness. However, Diamond-type triply periodic minimal surface (TPMS) tubes may exhibit unstable penetrating 45° shear band deformation under axial compression. To mitigate this instability, a bionic spider-web rib-reinforced Diamond-TPMS tube (D-BCT) is proposed based on spatial–structural partitioning, dividing the annular region into an inner rib-reinforced region and an outer Diamond-TPMS region. Three specimens of each structure were fabricated from AlSi10Mg alloy by selective laser melting and tested under quasi-static axial compression. Within a common 0–15 mm evaluation displacement, the D-BCT achieved a mean specific energy absorption (SEA) of 38.74 J/g, approximately 9.9% higher than that of the conventional Diamond-TPMS tube (D-CT), while reducing the mean peak crushing force by approximately 30.7% and increasing the mean crushing force efficiency (CFE) from 64.66% to 74.92%. Compared with D-CT, D-BCT exhibited progressive crushing and buckling rather than a penetrating shear band, together with a more stable plateau response. These results suggest that spatial–structural partitioning is a promising approach for improving the quasi-static crushing stability of Diamond-TPMS tubes.Keywords
This publication has 44 references indexed in Scilit:
- On energy absorption enhancement and load-bearing of TPMS sandwich filling structuresConstruction and Building Materials, 2026
- Improving energy absorption in structures using tubular TPMS structure optimization and printing strategiesComposite Structures, 2025
- Crushing analysis and numerical optimization of thin-walled structures inspired by spider webJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2025
- Manufacturing and compressive properties of sandwich foam tubes containing metal syntactic foamComposite Structures, 2023
- Nature-inspired bamboo-spiderweb hybrid cellular structures for impact applicationsComposite Structures, 2022
- Change of mechanical characteristics in spider silk capture threads after contact with preyActa Biomaterialia, 2022
- Compression and energy absorption characteristics of additively manufactured reticulated tubes filled with spherical reticulated shells under axial crushingComposite Structures, 2022
- Energy absorption of bio-inspired multi-layered graded foam-filled structures under axial crushingComposites Part B: Engineering, 2020
- Axial and radial compressive properties of alumina-aluminum matrix syntactic foam filled thin-walled tubesComposite Structures, 2019
- Compressive failure modes and energy absorption in additively manufactured double gyroid latticesAdditive Manufacturing, 2017