AKArif Kösemen

Arif Kösemen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Arif Kösemen has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Ionic Liquid-Based Biosensors for Disease X: Research Trends, Platform Gaps, and Translational Challenges

    by Murat Kavruk, Esra Menfaatli, Arif Kösemen, Sadullah Öztürk, Veli Cengiz Ozalp

    The COVID-19 pandemic exposed profound vulnerabilities in global diagnostic infrastructures, highlighting the urgent need for rapid, sensitive, and field-deployable biosensors to manage future outbreaks (Disease X). Ionic liquids (ILs), characterized by their tunable solvation, high ionic conductivity, and exceptional thermal stability, are emerging as transformative materials in sensor engineering. This review critically evaluates the integration of ILs across diverse biosensor platforms, moving beyond their conventional roles to assess their specific utility in pandemic preparedness. We analyze global research trends, demonstrating the potential of IL-based pathogen detection. Furthermore, we explore how ILs facilitate not only the direct electrochemical and optical detection of primary pathogens but also the monitoring of pandemic-associated secondary health parameters, such as cytokine storms (e.g., IL-6), metabolic distress, and hematological or organ-level complications. By bridging the gap between sample preparation, such as rapid, cold-chain-free nucleic acid extraction, and ultra-sensitive signal transduction, IL-based platforms offer a promising route toward decentralized surveillance. We deliberately layer this evidence: mechanistic support for IL-mediated gains in electron transfer and bioreceptor stabilization is strong, analytical support for low detection limits in defined matrices is substantial, but deployment evidence remains limited, as most systems are still laboratory prototypes. Finally, we discuss current translational challenges, including biocompatibility and standardization, outlining a roadmap for deploying IL-integrated diagnostics in resource-limited settings.

  • Open Access

    Tailoring Sensitivity and Selectivity with Nanoparticle-Functionalized ZnO Nanorods: The Impact of Metals on Sensing and Electrical Performance

    by Eray Tabak, Sadullah Öztürk, Arif Kösemen, Necmettin Kılınç, Zafer Ziya Öztürk

    In this study, metal (copper, nickel, cobalt, chromium)-decorated ZnO nanorods are successfully grown on glass substrates via a hydrothermal synthesis method to test their electrical and gas-sensing properties. SEM images revealed the formation of metal nanoparticles surrounding the ZnO nanorods. To confirm that these structures originated from the metal nanoparticles, EDX analysis was performed, and the presence of metal nanoparticles was validated. XRD analysis indicated that the crystal structure of the ZnO nanorods was hexagonal, and shifts in the (002) plane were observed due to metal nanoparticle doping. ZnO nanorods functionalized with metal nanoparticles were tested at 200 °C against various gases (hydrogen, ethanol, chloroform) and at different gas concentrations. The time-dependent variation in current was observed when ZnO nanorods functionalized with metal elements were exposed to hydrogen gas at test concentrations ranging from 1000 ppm to 5000 ppm at 200 °C. The results demonstrated a clear correlation between the rate of current change and hydrogen concentration, with higher concentrations resulting in faster responses. Additionally, the sensitivity of ZnO nanorods with decorated metal nanoparticles to ethanol and chloroform gases at concentrations ranging from 1000 ppm to 5000 ppm, as well as their sensor responses to different gases at 200 °C, were also measured.

  • Open Access

    Enhanced Photocatalytic and Electrical Performance of Boron-Doped ZnO Nanorods: A Taguchi Optimization Approach for Degradation Efficiency

    by Eray Tabak, Sadullah Öztürk, Arif Kösemen, Şahika Sena Bayazi̇t, Necmettin Kılınç, Mika Sillanpää, Birgül Benli̇

    In this study, the development of boron-doped zinc oxide nanorods (B-ZnO NRs) as an innovative photocatalyst for the degradation of organic pollutants under UV-A light was investigated. ZnO NRs, doped with varying concentrations of boron, were synthesized via a hydrothermal method, and their structural, optical, electrical, and photocatalytic properties were systematically characterized. The photocatalytic performance of B-ZnO NRs was evaluated under varying pH conditions, contaminant concentrations, and reaction times, while their electrical properties were analyzed by examining the conduction mechanism using the Arrhenius and Mott variable range hopping (VRH) conduction models. Results indicated that boron doping altered the conduction mechanism of ZnO as predicted by these models. In addition, boron doping enhanced electrical conductivity, with DC conductivity increasing up to 5-fold and alternating current conductivity by 3-fold compared to undoped ZnO. A significant enhancement in photocatalytic efficiency was observed, with B-ZnO exhibiting up to 140% higher degradation efficiency at pH 10 compared to pure ZnO. In addition, a Taguchi statistical optimization approach was employed to identify the most influential parameters affecting photocatalytic performance, including pH, reaction time, contaminant concentration, and boron doping levels. Optimal conditions were determined to be pH 10, a contaminant concentration of 2 μM, a reaction time of 90 min, and a boron doping level of 7%. Boron doping significantly improved the photocatalytic activity of ZnO nanorods, making them a promising candidate for advanced water treatment, hydrogen production, and environmental sensing applications.

  • Open Access

    Detection of Volatile Organic Compounds Using MOF and Metal Oxide Coated QCM Sensors

    by Nevin Nur Selçuk, Sadullah Öztürk, Şahika Sena Bayazit, Arif Kösemen

    Developing sensitive and selective gas sensors is crucial for environmental monitoring and industrial safety applications. In this study, quartz crystal microbalance (QCM)-based sensors were fabricated by coating their surfaces with different sensing layers, including Gd-MOF, La-MOF, ZnO, and P25. The initial resonance frequencies of the coated sensors were around 9.94 MHz, and the deposited mass loadings ranged from 8.17 to 27.90 ng/c depending on the material, as determined from the Sauerbrey equation. Distinct frequency response patterns were observed depending on both the sensing material and the analyte gas. The sensing performance of the fabricated sensors was evaluated toward ethanol, chlorobenzene, n-heptane, and toluene gases within the concentration range of 1000–5000 ppm. The sensors were tested under stable temperature and flow conditions using a gas mixing system, and their frequency–time responses were recorded. When different coating materials were compared, it was observed that sensors coated with P25 and La-MOF exhibited notably higher sensitivity toward aromatic gases. These findings reveal that the choice of coating material directly influences the VOC detection performance of QCM-based sensors.


  • Open Access

    Using the potential of nano-tubes as GEM-holes

    by Y. Kalkan, R. Lök, Y. Kandeğer, A. Kösemen, S. Öztürk

    Nanotube configurations are two primary one-dimensional nanostructures that have garnered significant raised because of their unique features and extensive application potential. This research utilized a methodical approach to create and assess the performance of nano-GEM foils, which integrated aluminum oxide nanotubes within porous aluminum oxide matrices. We also examined the inclusion of anodic aluminum oxide (AAO) structures, celebrated for celebrated for known for exceptional capabilities in gas multiplication applications. The resulting nanostructured GEM foils were designed with through-hole patterns. In addition, we assessed the viability of using AAO nanotubes as GEM holes, ensuring their unobstructed nature. A detector prototype was fabricated from the engineered nanostructured GEM foil.

  • The novel n-channel liquid crystal organic field effect transistor (LC-n-OFET): A promising technology for low-power electronics

    by Şule Zeynep Ki̇p, Keziban Gegi̇n, Ahmet Demi̇r, Oğuz Köysal, Sadullah Öztürk, Arif Kösemen