Mederbay Saduakassov
Research Subjects
Research Interests
Mederbay Saduakassov has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Gulnaz Ibraimbayeva
International Educational Corporation, Kazakh Leading Academy of Architecture and Civil Engineering
2 shared publications - A.M. Shoibekova
Almaty Beton materialdary" LLP, Almaty, Kazakhstan
1 shared publication Almaty Beton Materialdary Llp
1 shared publication- Bakhadyr Kopzhassarov
South Kazakhstan University named after M. Auezov, 160012, 5 Tauke Khana, Shymkent
1 shared publication Georgiy Tokmadzheshvili
Kazakh Academy of Architecture and Construction Sciences, 050000, 21 Solodovnikova, Almaty
1 shared publicationInternational Educational Corporation
1 shared publication
Latest Publications
- Open Access
- 1 September 2025
- Published by Ital Publication in Civil Engineering Journal
- Vol. 11 (9) , 3901-3915
Application of Feldspar Sand in Non-Autoclaved Foam Concrete Technology
The aim of this study is to determine the possibility of producing non-autoclaved foam concrete of grade M35 with a density of 900 kg/m³. A distinctive feature of this development is the testing of twin samples from the same batch: some were steamed in a chamber at 90 °C under normal atmospheric pressure, while others were autoclaved at a pressure of 8 bar and a temperature of 170 °C. It was established that ordinary natural feldspar sands with a fineness modulus ranging from 1.43 to 2.45, containing quartz below the standard-regulated levels, can be used in the production of non-autoclaved foam concrete. It is not possible to obtain non-autoclaved D900 foam concrete of grade M35 strength using only cement, sand, and foaming agent. To achieve the specified strength, it is necessary to use coarse sand with a fineness modulus (FM) greater than 3, subjected to short-term grinding to reduce the FM to recommended values, and to additionally introduce sol-gel liquid glass. The novelty lies in the experimental confirmation of the features of strength formation in cellular concrete under both non-autoclaved and autoclaved curing conditions. Comparative tests showed that high strength in cellular concrete is achieved only when a chemical bond forms between the products of cement hydrolysis and hydration with quartz sand grains—conditions made possible through autoclaving.
- 1 September 2025
- Published by Ital Publication in Civil Engineering Journal
- Vol. 11 (9) , 3901-3915
Open AccessApplication of Feldspar Sand in Non-Autoclaved Foam Concrete Technology
The aim of this study is to determine the possibility of producing non-autoclaved foam concrete of grade M35 with a density of 900 kg/m³. A distinctive feature of this development is the testing of twin samples from the same batch: some were steamed in a chamber at 90 °C under normal atmospheric pressure, while others were autoclaved at a pressure of 8 bar and a temperature of 170 °C. It was established that ordinary natural feldspar sands with a fineness modulus ranging from 1.43 to 2.45, containing quartz below the standard-regulated levels, can be used in the production of non-autoclaved foam concrete. It is not possible to obtain non-autoclaved D900 foam concrete of grade M35 strength using only cement, sand, and foaming agent. To achieve the specified strength, it is necessary to use coarse sand with a fineness modulus (FM) greater than 3, subjected to short-term grinding to reduce the FM to recommended values, and to additionally introduce sol-gel liquid glass. The novelty lies in the experimental confirmation of the features of strength formation in cellular concrete under both non-autoclaved and autoclaved curing conditions. Comparative tests showed that high strength in cellular concrete is achieved only when a chemical bond forms between the products of cement hydrolysis and hydration with quartz sand grains—conditions made possible through autoclaving.
- Open Access
- 15 June 2023
- Published by LLP International Educational Corporation in Bulletin of Kazakh Leading Academy of Architecture and Construction
- Vol. 88 (2) , 206-218
THERMAL INSULATION PERLITE CONCRETE GRADES D150 and D200
The article presents the results of research on the development of compositions and the study of the physico-mechanical properties of particularly light perlite concrete. It has been found that the use of foam makes it possible to dramatically increase the volume of cement dough, which makes it possible to mix the solution with brittle, weakly strong grains of expanded perlite sand. As a result of experimental studies, perlite concrete was obtained with an average dry density of 150-200 kg/m3, compressive strength of 0.32-0.43 MPa, thermal conductivity coefficient of 0.048-0.052 W / (m · ° C). The plates are designed for thermal insulation of residential and public buildings. In the conditions of Almaty, with a plate thickness of 10 cm, the required thermal protection of external structures of buildings is provided.
- 15 June 2023
- Published by LLP International Educational Corporation in Bulletin of Kazakh Leading Academy of Architecture and Construction
- Vol. 88 (2) , 206-218
Open AccessTHERMAL INSULATION PERLITE CONCRETE GRADES D150 and D200
The article presents the results of research on the development of compositions and the study of the physico-mechanical properties of particularly light perlite concrete. It has been found that the use of foam makes it possible to dramatically increase the volume of cement dough, which makes it possible to mix the solution with brittle, weakly strong grains of expanded perlite sand. As a result of experimental studies, perlite concrete was obtained with an average dry density of 150-200 kg/m3, compressive strength of 0.32-0.43 MPa, thermal conductivity coefficient of 0.048-0.052 W / (m · ° C). The plates are designed for thermal insulation of residential and public buildings. In the conditions of Almaty, with a plate thickness of 10 cm, the required thermal protection of external structures of buildings is provided.