Mohamed Torky
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mohamed Torky has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Woongje Sung
College of Nanotechnology Science and Engineering, University at Albany, Albany, NY, USA
2 shared publications - Woongje Sung
University at Albany
2 shared publications - Aivars Lelis
U.S. Army Research Laboratory (ARL)
1 shared publication - Bongmook Lee
State University of New York Polytechnic Institute 3 , Utica, New York 13502
1 shared publication - Collin Hitchcock
GE Research Center
1 shared publication Daehwan Chun
Hyundai Motor Company 2 , Uiwang-si, Gyeonggi-do 16082
1 shared publication
Latest Publications
- 8 July 2026
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 44 (5)
Experimental study of edge termination in (001) β-Ga2O3 Schottky barrier diodes supported by anisotropic breakdown simulation
This paper presents a comprehensive theoretical and experimental investigation into the breakdown voltage (BV) limits of vertical β-Ga2O3 Schottky barrier diodes (SBDs) on (001) substrates. First, MATLAB and TCAD simulations incorporating anisotropic impact ionization coefficients were utilized to establish theoretical critical electric fields for different crystallographic orientations. To mitigate orientation-dependent field crowding, SBDs utilizing single zone (SZ) and multiple floating zone (MFZ) junction termination extensions (JTEs) were fabricated with varying nitrogen doses, demonstrating significant BV improvements over standard P+ Terminated devices. A systematic postdeposition rapid thermal annealing study was subsequently conducted to address metal-semiconductor contact issues, revealing an optimal thermal window that maximized the experimental BV. However, despite these edge termination and thermal optimizations, the maximum achieved BV remained at ∼900 V, well below the ideal theoretical limit of ∼(2–2.5) kV. This deviation is primarily attributed to a low nitrogen dopant activation rate of approximately 10%. To overcome this fundamental fabrication limitation, a novel Ring-Assisted (RA) JTE structure is proposed and simulated. The RA-JTE demonstrates high field-smoothing efficacy even at low implantation doses, providing a robust architectural solution to capture the low nitrogen activation reality in next-generation β-Ga2O3 power electronics.
- 8 July 2026
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 44 (5)
Experimental study of edge termination in (001) β-Ga2O3 Schottky barrier diodes supported by anisotropic breakdown simulation
This paper presents a comprehensive theoretical and experimental investigation into the breakdown voltage (BV) limits of vertical β-Ga2O3 Schottky barrier diodes (SBDs) on (001) substrates. First, MATLAB and TCAD simulations incorporating anisotropic impact ionization coefficients were utilized to establish theoretical critical electric fields for different crystallographic orientations. To mitigate orientation-dependent field crowding, SBDs utilizing single zone (SZ) and multiple floating zone (MFZ) junction termination extensions (JTEs) were fabricated with varying nitrogen doses, demonstrating significant BV improvements over standard P+ Terminated devices. A systematic postdeposition rapid thermal annealing study was subsequently conducted to address metal-semiconductor contact issues, revealing an optimal thermal window that maximized the experimental BV. However, despite these edge termination and thermal optimizations, the maximum achieved BV remained at ∼900 V, well below the ideal theoretical limit of ∼(2–2.5) kV. This deviation is primarily attributed to a low nitrogen dopant activation rate of approximately 10%. To overcome this fundamental fabrication limitation, a novel Ring-Assisted (RA) JTE structure is proposed and simulated. The RA-JTE demonstrates high field-smoothing efficacy even at low implantation doses, providing a robust architectural solution to capture the low nitrogen activation reality in next-generation β-Ga2O3 power electronics.
- Open Access
- 19 May 2026
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1191, 55-60
Edge Termination Design for Ultra High-Voltage (>10 kV) 4H-SiC Power Devices Using Background Doping Modulation (BDM)
Achieving reliable breakdown in ultra-high-voltage (>10 kV) SiC devices is limited by edge termination design, where low epitaxial doping (~4×10¹⁴ cm⁻³) results in lateral straggle to be more prominent, therefore necessitating wider spacing between Aluminum implants in conventional floating field rings (FFRs). This study introduces a background doping modulation (BDM) scheme, incorporating a moderately doped N-type confinement region within P+ rings, enabling tighter spacing without added process complexity for high-voltage MOSFETs. Fabricated BDM-FFRs achieved >13 kV breakdown (30% higher than conventional FFRs), with leakage current <10 nA at 10 kV, while reducing termination area by 18.6%. Therefore, the BDM-FFR demonstrates a scalable, compact, and high-performance edge termination approach for next-generation ultra-high-voltage SiC devices.
- 19 May 2026
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1191, 55-60
Open AccessEdge Termination Design for Ultra High-Voltage (>10 kV) 4H-SiC Power Devices Using Background Doping Modulation (BDM)
Achieving reliable breakdown in ultra-high-voltage (>10 kV) SiC devices is limited by edge termination design, where low epitaxial doping (~4×10¹⁴ cm⁻³) results in lateral straggle to be more prominent, therefore necessitating wider spacing between Aluminum implants in conventional floating field rings (FFRs). This study introduces a background doping modulation (BDM) scheme, incorporating a moderately doped N-type confinement region within P+ rings, enabling tighter spacing without added process complexity for high-voltage MOSFETs. Fabricated BDM-FFRs achieved >13 kV breakdown (30% higher than conventional FFRs), with leakage current <10 nA at 10 kV, while reducing termination area by 18.6%. Therefore, the BDM-FFR demonstrates a scalable, compact, and high-performance edge termination approach for next-generation ultra-high-voltage SiC devices.
- Open Access
- 1 May 2026
- Published by AIP Publishing in AIP Advances
- Vol. 16 (5)
A unified analytical design reformulation for static performance optimization in Si, WBG, and UWBG devices
This paper presents a unified analytical reformulation and extension of existing drift-region design methods for high-voltage unipolar semiconductor devices. It enables unified design and performance optimization across a wide range of semiconductor materials like silicon (Si), wide-bandgap, and ultra-wide-bandgap semiconductors. The model provides closed-form expressions for the key performance parameters such as breakdown voltage (BV), critical electric field (Ecr), and depletion width (WD) using only doping concentration (ND) and intrinsic material properties. By assuming effective impact ionization coefficients via a geometric mean, the impact ionization integral can be solved analytically and then fitted using dimensionless parameters, eliminating the need for material-specific fitting. It applies to both non-punch-through and punch-through (PT) structures and guides designers in identifying optimal doping-thickness combinations. Applied to PT devices, the theoretical limits of the model predict 10%–15% improvement in conduction performance for all semiconductors across the practical BV range.
- 1 May 2026
- Published by AIP Publishing in AIP Advances
- Vol. 16 (5)
Open AccessA unified analytical design reformulation for static performance optimization in Si, WBG, and UWBG devices
This paper presents a unified analytical reformulation and extension of existing drift-region design methods for high-voltage unipolar semiconductor devices. It enables unified design and performance optimization across a wide range of semiconductor materials like silicon (Si), wide-bandgap, and ultra-wide-bandgap semiconductors. The model provides closed-form expressions for the key performance parameters such as breakdown voltage (BV), critical electric field (Ecr), and depletion width (WD) using only doping concentration (ND) and intrinsic material properties. By assuming effective impact ionization coefficients via a geometric mean, the impact ionization integral can be solved analytically and then fitted using dimensionless parameters, eliminating the need for material-specific fitting. It applies to both non-punch-through and punch-through (PT) structures and guides designers in identifying optimal doping-thickness combinations. Applied to PT devices, the theoretical limits of the model predict 10%–15% improvement in conduction performance for all semiconductors across the practical BV range.
- Open Access
- 5 September 2025
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1021, 85-93
Economic Feasibility Analysis of Vertical High-Voltage 4H-SiC Superjunction MOSFETs Compared to Conventional Counterparts
Vertical high-voltage 4H-SiC superjunction (SJ) MOSFETs have emerged as a superior alternative compared to conventional SiC MOSFET or Si IGBT, as SJ MOSFETs present a better trade-off between specific on-resistance (RON,sp) and breakdown voltage (BV). The fabrication of SJ devices requires precise, and multi-step processes, such as multi-epitaxial growth, trench-refill processes, and MeV implantations [3,4,5]. However, these methods increase the overall costs of SJ devices compared to their conventional counterparts, potentially undermining their benefits. This paper compares the chip costs of SJ and conventional MOSFETs at a wide range of BV and current ratings, evaluating the economic feasibility of SJ MOSFETs in 4H-SiC. Our results highlight the potential improvements in SJ fabrication and design to enhance cost-effectiveness, particularly for medium-voltage applications (>3.3kV).
- 5 September 2025
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1021, 85-93
Open AccessEconomic Feasibility Analysis of Vertical High-Voltage 4H-SiC Superjunction MOSFETs Compared to Conventional Counterparts
Vertical high-voltage 4H-SiC superjunction (SJ) MOSFETs have emerged as a superior alternative compared to conventional SiC MOSFET or Si IGBT, as SJ MOSFETs present a better trade-off between specific on-resistance (RON,sp) and breakdown voltage (BV). The fabrication of SJ devices requires precise, and multi-step processes, such as multi-epitaxial growth, trench-refill processes, and MeV implantations [3,4,5]. However, these methods increase the overall costs of SJ devices compared to their conventional counterparts, potentially undermining their benefits. This paper compares the chip costs of SJ and conventional MOSFETs at a wide range of BV and current ratings, evaluating the economic feasibility of SJ MOSFETs in 4H-SiC. Our results highlight the potential improvements in SJ fabrication and design to enhance cost-effectiveness, particularly for medium-voltage applications (>3.3kV).
- Open Access
- 23 August 2024
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 360, 163-167
Comparative Performance Evaluation of High-Voltage Bidirectional, Conventional and Superjunction Planar DMOSFETs in 4H-SiC
We quantitively compare the static and dynamic performance for high-voltage SiC bidirectional (BD) conventional and superjunction (SJ) DMOSFETs by using 3D TCAD simulations. We extract the specific on-resistance (RON,sp) and the total specific switching charge (QT,sp), which is a sum of the specific gate charge (QG,sp) and drain charge (QDS,sp) to quantify both the static and switching characteristics respectively. We also develop a new Figure-of-Merit (FoM), which is the product of RON,sp . QT,sp, to evaluate the overall performance. We show that the high-voltage 4H-SiC BD SJ DMOSFET has the best FoM with substantial (>58%) improvement, compared to the BD conventional DMOSFETs, which increases with increasing breakdown voltage.
- 23 August 2024
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 360, 163-167
Open AccessComparative Performance Evaluation of High-Voltage Bidirectional, Conventional and Superjunction Planar DMOSFETs in 4H-SiC
We quantitively compare the static and dynamic performance for high-voltage SiC bidirectional (BD) conventional and superjunction (SJ) DMOSFETs by using 3D TCAD simulations. We extract the specific on-resistance (RON,sp) and the total specific switching charge (QT,sp), which is a sum of the specific gate charge (QG,sp) and drain charge (QDS,sp) to quantify both the static and switching characteristics respectively. We also develop a new Figure-of-Merit (FoM), which is the product of RON,sp . QT,sp, to evaluate the overall performance. We show that the high-voltage 4H-SiC BD SJ DMOSFET has the best FoM with substantial (>58%) improvement, compared to the BD conventional DMOSFETs, which increases with increasing breakdown voltage.
- Open Access
- 23 August 2024
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 360, 151-155
Experimental Demonstration and Analysis of 3.3kV 4H-SiC Common-Drain Bidirectional Charge-Balanced Power MOSFETs
By using 4H-SiC packaged Charge-Balanced (CB) MOSFET, we have experimentally demonstrated a 3.3kV 4H-SiC common-drain bidirectional (BD) CB power MOSFET and measured its static and dynamic characteristics compared to its unidirectional counterpart. We show that the BD CB MOSFET conducts and blocks at the first and third quadrants with the appropriate gate bias with an on-state resistance double its unidirectional counterpart, while its switching energies are 12 (19) and 34 (12) mJ/cm2for BD CB MOSFET (UD CB MOSFET).
- 23 August 2024
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 360, 151-155
Open AccessExperimental Demonstration and Analysis of 3.3kV 4H-SiC Common-Drain Bidirectional Charge-Balanced Power MOSFETs
By using 4H-SiC packaged Charge-Balanced (CB) MOSFET, we have experimentally demonstrated a 3.3kV 4H-SiC common-drain bidirectional (BD) CB power MOSFET and measured its static and dynamic characteristics compared to its unidirectional counterpart. We show that the BD CB MOSFET conducts and blocks at the first and third quadrants with the appropriate gate bias with an on-state resistance double its unidirectional counterpart, while its switching energies are 12 (19) and 34 (12) mJ/cm2for BD CB MOSFET (UD CB MOSFET).
- Open Access
- 1 May 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (5)
Determination of the effective critical breakdown field for Si, wide, and extreme bandgap semiconductor superjunction devices
Designing high voltage superjunction (SJ) power devices with wide bandgap and extreme bandgap semiconductors, when compared to silicon, can enhance the trade-off between RON,sp and BV significantly, due to their >10× higher avalanche breakdown electric field. Nevertheless, because of the difference in the breakdown field profile and ionization path length, the effective breakdown field for these semiconductor SJ devices has not been determined theoretically. Consequently, we estimate and compare the effective critical breakdown electric field for SJ device structures in Si, 4H–SiC, 2H–GaN, β-Ga2O3, diamond, and AlN using Technology Computer Aided Design TCAD simulation. We also establish its dependence on the SJ devices’ structural parameters, such as the pillar thickness. Furthermore, we also quantitatively compare the on-state performance of these SJ devices, including their thermal capabilities, using a paramount figure-of-merit to underscore the potential improvement possible.
- 1 May 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (5)
Open AccessDetermination of the effective critical breakdown field for Si, wide, and extreme bandgap semiconductor superjunction devices
Designing high voltage superjunction (SJ) power devices with wide bandgap and extreme bandgap semiconductors, when compared to silicon, can enhance the trade-off between RON,sp and BV significantly, due to their >10× higher avalanche breakdown electric field. Nevertheless, because of the difference in the breakdown field profile and ionization path length, the effective breakdown field for these semiconductor SJ devices has not been determined theoretically. Consequently, we estimate and compare the effective critical breakdown electric field for SJ device structures in Si, 4H–SiC, 2H–GaN, β-Ga2O3, diamond, and AlN using Technology Computer Aided Design TCAD simulation. We also establish its dependence on the SJ devices’ structural parameters, such as the pillar thickness. Furthermore, we also quantitatively compare the on-state performance of these SJ devices, including their thermal capabilities, using a paramount figure-of-merit to underscore the potential improvement possible.
- 4 July 2023
- Published by Wiley in Physica Status Solidi (a)
- Vol. 220 (16)
Comparative Performance Evaluation for 1.2–10kV Conventional and Superjunction GaN Current Aperture Vertical Electron Transistors
The performance potentials and limits for GaN current aperture vertical electron transistors with conventional, doped, and natural polarization superjunction (PSJ) drift layers at 1.2–10 kV breakdown voltage (BV) ratings are quantitatively compared. The static and dynamic performance parameters for each device are simulated and extracted. The specific on‐resistance RON,sp and specific total charge QT,sp (defined as the sum of specific gate charge QG,sp and specific drain–source charge QDS,sp) are extracted from Medici technology computer‐aided design simulations representing both the static and dynamic performance respectively. Moreover, a developed figure‐of‐merit (FoM) (RON,sp · QT,sp) is used to quantitively compare the performance of these field‐effect transistors in the range of BV ratings. Compared to the doped superjunction (DSJ) and conventional CAVETs, natural PSJ CAVET exhibits 1%–60% and 70%–99% reduction in RON,sp, while it is 100 to 1000× reduction in QT,sp, at BV between 1.2 and 10 kV respectively. Simultaneously, 22%–80% and 80%–99% reduction in performance FoM respectively are found.
- 4 July 2023
- Published by Wiley in Physica Status Solidi (a)
- Vol. 220 (16)
Comparative Performance Evaluation for 1.2–10kV Conventional and Superjunction GaN Current Aperture Vertical Electron Transistors
The performance potentials and limits for GaN current aperture vertical electron transistors with conventional, doped, and natural polarization superjunction (PSJ) drift layers at 1.2–10 kV breakdown voltage (BV) ratings are quantitatively compared. The static and dynamic performance parameters for each device are simulated and extracted. The specific on‐resistance RON,sp and specific total charge QT,sp (defined as the sum of specific gate charge QG,sp and specific drain–source charge QDS,sp) are extracted from Medici technology computer‐aided design simulations representing both the static and dynamic performance respectively. Moreover, a developed figure‐of‐merit (FoM) (RON,sp · QT,sp) is used to quantitively compare the performance of these field‐effect transistors in the range of BV ratings. Compared to the doped superjunction (DSJ) and conventional CAVETs, natural PSJ CAVET exhibits 1%–60% and 70%–99% reduction in RON,sp, while it is 100 to 1000× reduction in QT,sp, at BV between 1.2 and 10 kV respectively. Simultaneously, 22%–80% and 80%–99% reduction in performance FoM respectively are found.