Dmitrii Shatagin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dmitrii Shatagin has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Andrey Kurkin
Department of Applied Mathematics, Nizhny Novgorod State Technical University n.a. R.E. Alekseev, Nizhny Novgorod 603155, Russia
3 shared publications - Dmitry A. Ryabov
Alekseev Nizhny Novgorod State Technical University, Nizhny Novgorod, Russia
2 shared publications M. S. Anosov
Nizhny Novgorod State Technical University, Nizhny Novgorod, Russia
2 shared publicationsM. V. Zhelonkin
Nizhny Novgorod State Technical University, Nizhny Novgorod, Russia
2 shared publicationsMaksim Anosov
NNSTU, 603950 Minin St., 24, Nizhny Novgorod, Russia
2 shared publications- Maksim S. Anosov
Nizhny Novgorod State Technical University n.a. R. E. Alekseev
2 shared publications
Latest Publications
- Open Access
- 18 January 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (2) , 982
Multiparametric Vibration Diagnostics of Machine Tools Within a Digital Twin Framework Using Machine Learning
In the context of the digital transformation of industrial production, the need for intelligent maintenance and repair systems capable of ensuring reliable operation of machine-tool equipment without operator involvement is growing. This present study reviews the current state and future development of diagnostic and condition-monitoring systems for metalworking machine tools. A review of international standards and existing solutions from domestic and international vendors in vibration diagnostics has been conducted. Particular attention is paid to non-intrusive vibration diagnostics, digital twins, multiparametric analysis methods, and neural network approaches to failure prediction. The architecture of the developed system is presented. The concept of the system is developed in full compliance with Russian and international standards of vibration diagnostics. At its core, the comprehensive digital twin relies on machine learning methods. The proposed architecture is a predictive-maintenance system built on interconnected digital twin realizations: the dynamic machine passport of a unit, operational data, and a comprehensive digital twin of the machine-tool equipment. The potential of neuromorphic computing on a hardware platform is being considered as a promising element for local-condition classification and emergency protection. At the current development stage, the operating principle has been demonstrated along with the integration into the control loop. The system is now at the beginning of laboratory testing. It demonstrates capabilities for comprehensive assessment of the equipment’s technical condition based on multiparametric data, short-term vibration trend forecasting using a Long Short-Term Memory network, and state classification using a Multilayer Perceptron model. The results of the system’s testing on a turning machining center have been analyzed.
- 18 January 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (2) , 982
Open AccessMultiparametric Vibration Diagnostics of Machine Tools Within a Digital Twin Framework Using Machine Learning
In the context of the digital transformation of industrial production, the need for intelligent maintenance and repair systems capable of ensuring reliable operation of machine-tool equipment without operator involvement is growing. This present study reviews the current state and future development of diagnostic and condition-monitoring systems for metalworking machine tools. A review of international standards and existing solutions from domestic and international vendors in vibration diagnostics has been conducted. Particular attention is paid to non-intrusive vibration diagnostics, digital twins, multiparametric analysis methods, and neural network approaches to failure prediction. The architecture of the developed system is presented. The concept of the system is developed in full compliance with Russian and international standards of vibration diagnostics. At its core, the comprehensive digital twin relies on machine learning methods. The proposed architecture is a predictive-maintenance system built on interconnected digital twin realizations: the dynamic machine passport of a unit, operational data, and a comprehensive digital twin of the machine-tool equipment. The potential of neuromorphic computing on a hardware platform is being considered as a promising element for local-condition classification and emergency protection. At the current development stage, the operating principle has been demonstrated along with the integration into the control loop. The system is now at the beginning of laboratory testing. It demonstrates capabilities for comprehensive assessment of the equipment’s technical condition based on multiparametric data, short-term vibration trend forecasting using a Long Short-Term Memory network, and state classification using a Multilayer Perceptron model. The results of the system’s testing on a turning machining center have been analyzed.
- 1 September 2024
- Published by Allerton Press in Steel in Translation
- Vol. 54 (9) , 875-879
Effect of Heat and Vibration Treatment on Cold Resistance and Structure of ER70-S6 Steel Obtained by Electric Arc Cladding 3D Printing
The effect of heat and vibration treatments on the structure and mechanical properties of experimental samples obtained from ER70-S6 welding wire by additi
- 1 September 2024
- Published by Allerton Press in Steel in Translation
- Vol. 54 (9) , 875-879
Effect of Heat and Vibration Treatment on Cold Resistance and Structure of ER70-S6 Steel Obtained by Electric Arc Cladding 3D Printing
The effect of heat and vibration treatments on the structure and mechanical properties of experimental samples obtained from ER70-S6 welding wire by additi
- Open Access
Prediction of Failure Due to Fatigue of Wire Arc Additive Manufacturing-Manufactured Product
Currently, the focus of production is shifting towards the use of innovative manufacturing techniques and away from traditional methods. Additive manufacturing technologies hold great promise for creating industrial products. The industry aims to enhance the reliability of individual components and structural elements, as well as the ability to accurately anticipate component failure, particularly due to fatigue. This paper explores the possibility of predicting component failure in parts produced using the WAAM (wire arc additive manufacturing) method by employing fractal dimension analysis. Additionally, the impact of manufacturing imperfections and various heat treatment processes on the fatigue resistance of 30CrMnSi steel has been investigated. Fatigue testing of samples and actual components fabricated via the WAAM process was conducted in this study. The destruction of the examined specimens and products was predicted by evaluating the fractal dimensions of micrographs acquired at different stages of fatigue testing. It has been established that technological defects are more dangerous in terms of fatigue failure than microstructural ones. The correctly selected mode of heat treatment for metal after electric arc welding allows for a more homogeneous microstructure with a near-complete absence of microstructural defects. A comparison of the fractal dimension method with other damage assessment methods shows that it has high accuracy in predicting part failure and is less labor-intensive than other methods.
Open AccessPrediction of Failure Due to Fatigue of Wire Arc Additive Manufacturing-Manufactured Product
Currently, the focus of production is shifting towards the use of innovative manufacturing techniques and away from traditional methods. Additive manufacturing technologies hold great promise for creating industrial products. The industry aims to enhance the reliability of individual components and structural elements, as well as the ability to accurately anticipate component failure, particularly due to fatigue. This paper explores the possibility of predicting component failure in parts produced using the WAAM (wire arc additive manufacturing) method by employing fractal dimension analysis. Additionally, the impact of manufacturing imperfections and various heat treatment processes on the fatigue resistance of 30CrMnSi steel has been investigated. Fatigue testing of samples and actual components fabricated via the WAAM process was conducted in this study. The destruction of the examined specimens and products was predicted by evaluating the fractal dimensions of micrographs acquired at different stages of fatigue testing. It has been established that technological defects are more dangerous in terms of fatigue failure than microstructural ones. The correctly selected mode of heat treatment for metal after electric arc welding allows for a more homogeneous microstructure with a near-complete absence of microstructural defects. A comparison of the fractal dimension method with other damage assessment methods shows that it has high accuracy in predicting part failure and is less labor-intensive than other methods.
- 26 August 2024
- Published by Ore and Metals Publishing House in Chernye Metally
- No. 8,p. 32-38
Influence of WAAM process parameters on the composition and structure of the Sv-08G2S – Sv-07Kh25N13 layered bimetallic composite
Currently, more and more attention is being paid to additive technologies from the side of real production. This is due to the unique capabilities to create complex, large-sized blanks with functional gradient properties. Particular attention is paid to the creation of products made of layered composite bimetallic materials. The most popular materials systems include bimetals of the “low–alloy carbon steel - stainless chromium-nickel steel” type, which are widely used in the energy, military and aerospace industries. One of the ways to produce such products is the technology of electric arc cultivation (Wire Arc Additive Manufacturing – WAAM). However, despite the great scientific groundwork, the composition, structure and properties of bimetallic composites produced by the WAAM method have not been sufficiently studied. The purpose of the presented work is to study the effect of WAAM technological parameters on the composition and structure of the layered bimetallic composite “Sv-08G2S – Sv-07Kh25N13”. Experimental samples for research were produced by the WAAM method at various printing strategies and specific energies. Studies of the microstructure of the sections and chemical analysis of various zones of the composite were carried out. It is shown that the WAAM modes and the surfacing strategy largely determine the structure and phase composition of the main layers and transition zones of the bimetallic composite. The structure of Sv-08G2S steel in the composite is represented by ferrite and ferrite-cementite mixture (perlite), and Sv-07Kh25N13 steel by various ratios of austenite, δ-ferrite, carbides and intermetallide phases. It has been established that the distribution of chemical elements in various sections of the steel Sv-08G2S included in the bimetallic composite is stable and does not depend on the parameters of WAAM surfacing for steel Sv-07Kh25N13. For steel Sv-07Kh25N13, the distribution of chemical elements significantly depends on the WAAM surfacing mode.The work was supported by the grant of the Russian Science Foundation No. 22-79-10204 “Development of scientific and technological foundations for the synthesis of WAAM-obtained layered polymetallic composite materials for operation in low-temperature conditions.”
- 26 August 2024
- Published by Ore and Metals Publishing House in Chernye Metally
- No. 8,p. 32-38
Influence of WAAM process parameters on the composition and structure of the Sv-08G2S – Sv-07Kh25N13 layered bimetallic composite
Currently, more and more attention is being paid to additive technologies from the side of real production. This is due to the unique capabilities to create complex, large-sized blanks with functional gradient properties. Particular attention is paid to the creation of products made of layered composite bimetallic materials. The most popular materials systems include bimetals of the “low–alloy carbon steel - stainless chromium-nickel steel” type, which are widely used in the energy, military and aerospace industries. One of the ways to produce such products is the technology of electric arc cultivation (Wire Arc Additive Manufacturing – WAAM). However, despite the great scientific groundwork, the composition, structure and properties of bimetallic composites produced by the WAAM method have not been sufficiently studied. The purpose of the presented work is to study the effect of WAAM technological parameters on the composition and structure of the layered bimetallic composite “Sv-08G2S – Sv-07Kh25N13”. Experimental samples for research were produced by the WAAM method at various printing strategies and specific energies. Studies of the microstructure of the sections and chemical analysis of various zones of the composite were carried out. It is shown that the WAAM modes and the surfacing strategy largely determine the structure and phase composition of the main layers and transition zones of the bimetallic composite. The structure of Sv-08G2S steel in the composite is represented by ferrite and ferrite-cementite mixture (perlite), and Sv-07Kh25N13 steel by various ratios of austenite, δ-ferrite, carbides and intermetallide phases. It has been established that the distribution of chemical elements in various sections of the steel Sv-08G2S included in the bimetallic composite is stable and does not depend on the parameters of WAAM surfacing for steel Sv-07Kh25N13. For steel Sv-07Kh25N13, the distribution of chemical elements significantly depends on the WAAM surfacing mode.The work was supported by the grant of the Russian Science Foundation No. 22-79-10204 “Development of scientific and technological foundations for the synthesis of WAAM-obtained layered polymetallic composite materials for operation in low-temperature conditions.”
- 1 December 2023
- Published by Pleiades Publishing Ltd in Russian Metallurgy (Metally)
- Vol. 2023 (13) , 2265-2269
Influence of Heat and Vibration Treatment on the Cold Resistance and Structure of ER70-S6 Steel Fabricated by 3D Printing Using Electric Arc Cladding
—The influence of heat and vibration treatment on the structure and mechanical properties of experimental specimens prepared from an ER70-S6 welding wire by additive electric arc growth is considered. Based on the results of impact strength tests, the cold resistance of the experimental specimens is estimated. Electron microscopy is used to analyze the microstructure of the material and to calculate the grain size. Heat treatment and vibration treatment are shown to significantly increase the cold resistance of the materials produced by electric arc cladding. Replacement of heat treatment operations is possible by introducing the function of vibration treatment of a weld pool into hybrid machining centers.
- 1 December 2023
- Published by Pleiades Publishing Ltd in Russian Metallurgy (Metally)
- Vol. 2023 (13) , 2265-2269
Influence of Heat and Vibration Treatment on the Cold Resistance and Structure of ER70-S6 Steel Fabricated by 3D Printing Using Electric Arc Cladding
—The influence of heat and vibration treatment on the structure and mechanical properties of experimental specimens prepared from an ER70-S6 welding wire by additive electric arc growth is considered. Based on the results of impact strength tests, the cold resistance of the experimental specimens is estimated. Electron microscopy is used to analyze the microstructure of the material and to calculate the grain size. Heat treatment and vibration treatment are shown to significantly increase the cold resistance of the materials produced by electric arc cladding. Replacement of heat treatment operations is possible by introducing the function of vibration treatment of a weld pool into hybrid machining centers.
- Open Access
- 28 June 2023
- Published by National University of Science and Technology MISiS in Izvestiya. Ferrous Metallurgy
- Vol. 66 (3) , 294-301
Structure formation of Np-30KhGSA alloy in wire and arc additive manufacturing
Использование 3D-печати изделий из металлических материалов является современной перспективной технологией, способствующей повышению производственной эффективности. Однако применение данной технологии сопряжено с рядом проблем, например, с повышенной микроструктурной неоднородностью и дефектностью металла. В связи с этим требуется проведение исследований, направленных на выявление таких режимов 3D-печати, которые бы обеспечили получение наиболее однородной, стабильной и бездефектной структуры. В работе изучено структурообразование стали марки 30ХГСА в процессе аддитивной электродуговой наплавки при различных режимах печати. Для оценки качества полученных заготовок применялись микроструктурный и фрактальный анализы, а также измерение микротвердости. При всех режимах наплавки выявлена значительная структурная неоднородность наплавленной заготовки, которая объясняется термическим воздействием наплавляемого слоя на уже закристаллизовавшийся металл. Тем не менее, установлен режим, который дает наиболее благоприятную микроструктуру с точки зрения ее однородности и равноосности зерен. При увеличении значений погонной энергии процесса аддитивного электродугового выращивания наблюдается увеличение производительности процесса и фиксируется уменьшение количества пор в материале. Однако при значениях погонной энергии процесса наплавки свыше 1000 Дж/мм увеличивается структурная неоднородность материала и значительно снижается его микротвердость. Исходя из проведенных исследований, в качестве режима 3D-печати электродуговой наплавкой для сплава Нп-30ХГСА может быть выбран режим с погонной энергией порядка 920 Дж/мм. Он обеспечивает наименьшую структурную неоднородность и достаточно высокую производительность процесса выращивания с отсутствием дефектов в виде пор и элементов нерасплавившейся проволоки.
- 28 June 2023
- Published by National University of Science and Technology MISiS in Izvestiya. Ferrous Metallurgy
- Vol. 66 (3) , 294-301
Open AccessStructure formation of Np-30KhGSA alloy in wire and arc additive manufacturing
Использование 3D-печати изделий из металлических материалов является современной перспективной технологией, способствующей повышению производственной эффективности. Однако применение данной технологии сопряжено с рядом проблем, например, с повышенной микроструктурной неоднородностью и дефектностью металла. В связи с этим требуется проведение исследований, направленных на выявление таких режимов 3D-печати, которые бы обеспечили получение наиболее однородной, стабильной и бездефектной структуры. В работе изучено структурообразование стали марки 30ХГСА в процессе аддитивной электродуговой наплавки при различных режимах печати. Для оценки качества полученных заготовок применялись микроструктурный и фрактальный анализы, а также измерение микротвердости. При всех режимах наплавки выявлена значительная структурная неоднородность наплавленной заготовки, которая объясняется термическим воздействием наплавляемого слоя на уже закристаллизовавшийся металл. Тем не менее, установлен режим, который дает наиболее благоприятную микроструктуру с точки зрения ее однородности и равноосности зерен. При увеличении значений погонной энергии процесса аддитивного электродугового выращивания наблюдается увеличение производительности процесса и фиксируется уменьшение количества пор в материале. Однако при значениях погонной энергии процесса наплавки свыше 1000 Дж/мм увеличивается структурная неоднородность материала и значительно снижается его микротвердость. Исходя из проведенных исследований, в качестве режима 3D-печати электродуговой наплавкой для сплава Нп-30ХГСА может быть выбран режим с погонной энергией порядка 920 Дж/мм. Он обеспечивает наименьшую структурную неоднородность и достаточно высокую производительность процесса выращивания с отсутствием дефектов в виде пор и элементов нерасплавившейся проволоки.
- Open Access
Microstructure, Phase Composition, and Mechanical Properties of a Layered Bimetallic Composite ER70S-6-ER309LSI Obtained by the WAAM Method
Currently, additive manufacturing technologies for materials and products are being implemented and improved. This is due to the possibility of creating workpieces with complex geometric shapes and specified functional gradient properties. The materials with the most complex functional properties demanded by the military–energy industry include bimetals of the “low-alloyed carbon steel—stainless chromium-nickel steel” type. One of the promising ways to obtain bimetallic products is the WAAM (Wire Arc Additive Manufacturing) technology. Despite the large scientific groundwork, the composition, structure, and properties of bimetallic composites produced by WAAM have not been sufficiently studied. The aim of the current work is to study the effect of WAAM parameters and the subsequent heat treatment on the composition, structure, and physical and mechanical properties of the bimetallic composite “ER70S-6-R309LSI”. Spectral, metallographic, and X-ray diffraction studies were carried out, as were mechanical tests of the samples obtained under various WAAM modes. In order to improve the composites’ properties, various types of heat treatments were applied. It is shown that the WAAM modes, the building strategy, and heat treatment determine the structure of layers and transition zones, as well as the mechanical characteristics of the composite. The structure of ER70S-6 in the composite is represented by the ferrite and the ferrite–cementite mixture (pearlite), and ER309LSI is represented by different ratios of austenite, δ-ferrite, carbide, and intermetallic phases. From the point of view of the mechanical properties, the most promising mode of surfacing is “Double Pulse”, followed by heat treatment by way of austenitization and normalization annealing. In this case, there is a decrease in the content of the δ-ferrite, a leveling of microhardness values, and a 40% increase in the tensile strength of the composite.
Open AccessMicrostructure, Phase Composition, and Mechanical Properties of a Layered Bimetallic Composite ER70S-6-ER309LSI Obtained by the WAAM Method
Currently, additive manufacturing technologies for materials and products are being implemented and improved. This is due to the possibility of creating workpieces with complex geometric shapes and specified functional gradient properties. The materials with the most complex functional properties demanded by the military–energy industry include bimetals of the “low-alloyed carbon steel—stainless chromium-nickel steel” type. One of the promising ways to obtain bimetallic products is the WAAM (Wire Arc Additive Manufacturing) technology. Despite the large scientific groundwork, the composition, structure, and properties of bimetallic composites produced by WAAM have not been sufficiently studied. The aim of the current work is to study the effect of WAAM parameters and the subsequent heat treatment on the composition, structure, and physical and mechanical properties of the bimetallic composite “ER70S-6-R309LSI”. Spectral, metallographic, and X-ray diffraction studies were carried out, as were mechanical tests of the samples obtained under various WAAM modes. In order to improve the composites’ properties, various types of heat treatments were applied. It is shown that the WAAM modes, the building strategy, and heat treatment determine the structure of layers and transition zones, as well as the mechanical characteristics of the composite. The structure of ER70S-6 in the composite is represented by the ferrite and the ferrite–cementite mixture (pearlite), and ER309LSI is represented by different ratios of austenite, δ-ferrite, carbide, and intermetallic phases. From the point of view of the mechanical properties, the most promising mode of surfacing is “Double Pulse”, followed by heat treatment by way of austenitization and normalization annealing. In this case, there is a decrease in the content of the δ-ferrite, a leveling of microhardness values, and a 40% increase in the tensile strength of the composite.
- Open Access
- 1 November 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 971 (2) , 022001
Intelligent diagnostics and control of 3D printing processes by electric arc surfacing of workpieces made of cold-resistant materials on a CNC machine using machine learning approaches and neuromorphic calculations
The article discusses a method for diagnosing and optimizing the dynamic state of an electric arc during 3D printing of workpieces from cold-resistant materials on a CNC machine within the framework of a cyber-physical system. The possibility of applying nonlinear dynamics methods to assess the stability of the 3D printing process and artificial neural processes for classifying and optimizing the parameters of the dynamic state of the 3D printing process is shown. Experimental studies of the cold resistance obtained by 3D printing of 09G2S steel samples were carried out taking into account the choice of optimal modes.
- 1 November 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 971 (2) , 022001
Open AccessIntelligent diagnostics and control of 3D printing processes by electric arc surfacing of workpieces made of cold-resistant materials on a CNC machine using machine learning approaches and neuromorphic calculations
The article discusses a method for diagnosing and optimizing the dynamic state of an electric arc during 3D printing of workpieces from cold-resistant materials on a CNC machine within the framework of a cyber-physical system. The possibility of applying nonlinear dynamics methods to assess the stability of the 3D printing process and artificial neural processes for classifying and optimizing the parameters of the dynamic state of the 3D printing process is shown. Experimental studies of the cold resistance obtained by 3D printing of 09G2S steel samples were carried out taking into account the choice of optimal modes.
- Open Access
- 1 January 2020
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1431 (1) , 012068
Research of the metals elasticoplastic cyclic deformation process at reduced temperature
In the present work the test results of steel samples 20 and 45 at a temperature 20° C and -30°C when exposed to variable loads are shown. Fractographic studies of breaks were carried out using optical and electron microscopy. A comprehensive analysis of the materials destruction process, based on the analysis of acoustic emission signals, was also conducted. To estimate the damage of metals the algorithm that uses indicators of fractal dimension and informational entropy of the acoustic emission signal is proposed. The research results showed that the characteristics of fractal dimension and information entropy expand and supplement the capabilities of acoustic methods in the problems of evaluating the performance of materials with low-cycle fatigue at low temperatures.
- 1 January 2020
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1431 (1) , 012068
Open AccessResearch of the metals elasticoplastic cyclic deformation process at reduced temperature
In the present work the test results of steel samples 20 and 45 at a temperature 20° C and -30°C when exposed to variable loads are shown. Fractographic studies of breaks were carried out using optical and electron microscopy. A comprehensive analysis of the materials destruction process, based on the analysis of acoustic emission signals, was also conducted. To estimate the damage of metals the algorithm that uses indicators of fractal dimension and informational entropy of the acoustic emission signal is proposed. The research results showed that the characteristics of fractal dimension and information entropy expand and supplement the capabilities of acoustic methods in the problems of evaluating the performance of materials with low-cycle fatigue at low temperatures.
- Open Access
- 1 January 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 709 (3) , 033076
Evaluation of the mechanism of the destruction of metals based on approaches of artificial intelligence and fractal analysis
The article examines modern informational approaches to assess the degree of damageability of materials based on their fractographic images. The possibility of using the fractal dimension, wavelet transform and convolutional artificial neural networks for tiling and classifying the share of viscous and brittle destructions on fractures is shown. The results of experimental studies of the impact viscosity of materials with different types of crystal lattices in a wide range of temperatures are presented.
- 1 January 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 709 (3) , 033076
Open AccessEvaluation of the mechanism of the destruction of metals based on approaches of artificial intelligence and fractal analysis
The article examines modern informational approaches to assess the degree of damageability of materials based on their fractographic images. The possibility of using the fractal dimension, wavelet transform and convolutional artificial neural networks for tiling and classifying the share of viscous and brittle destructions on fractures is shown. The results of experimental studies of the impact viscosity of materials with different types of crystal lattices in a wide range of temperatures are presented.