JAJoseph Arockiam Antony

Joseph Arockiam Antony

*This is an algorithmically generated author record based on publicly available information.

Joseph Arockiam Antony has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Sustainable PLA composite filaments reinforced with bio-waste derived prawn shell particles for additive manufacturing

    by Joseph Arockiam Antony, Dharmalingam Ommurugadhasan, Ajay Sumantrao Bonde, Vignesh Packkirisamy

    The present study investigates the development and characterization of sustainable poly(lactic acid) (PLA) composite filaments reinforced with bio-waste derived prawn shell particles (PSP) for fused deposition modeling (FDM) applications. PLA/PSP composite filaments containing 5–20 wt% PSP were fabricated using a multi-zone twin-screw extrusion process, and their dimensional stability, surface morphology, thermal behavior, and mechanical performance were systematically evaluated. The incorporation of PSP significantly influenced the extrusion quality and structure–property relationship of the developed filaments. Among the investigated compositions, the 15 wt% PSP composite exhibited the best overall performance, achieving a tensile strength of 46.2 MPa with improved surface uniformity due to enhanced filler dispersion and interfacial adhesion. Thermal analysis revealed that the 10 wt% PSP composite exhibited superior thermal stability with an onset degradation temperature of 372°C, while higher PSP loadings promoted increased char formation because of the mineral-rich nature of the prawn shell particles. SEM observations further confirmed homogeneous particle distribution and reduced interfacial defects at the optimum filler loading. Overall, the study demonstrates the potential of prawn shell waste as a sustainable bio-reinforcement for developing high-performance biodegradable PLA filaments for additive manufacturing applications.

  • Engineering sustainable composites: Role of fibre sequence and treatment in sisal/ramie vinyl ester composites

    by R. M. Reddy, S. S. Raj, L. Gundagani, S. M. Kumar, T. Shubhlakshmi, G. K. Jadhav, G. Dharmalingam, A. B. Kolekar, A. J. Arockiam

    This study investigated the impacts of fibre stacking sequence and sodium hydroxide treatment on the mechanical properties of sustainable sisal/ramie hybrid vinyl ester composites. Fourier transform infrared analysis (FTIR) revealed significant chemical changes in treated fibres, including increased fibre purity due to the removal of hemicellulose and portions of lignin, resulting in more hydroxyl groups. These changes enhanced the interaction between fibres and the matrix, thereby improving the mechanical properties of the composites. Among various stacking sequences, the ramie/sisal/sisal/ramie (C6) configuration exhibited the highest Shore‐D hardness (61.2 D), tensile strength (30.83 MPa), and tensile modulus (0.84 GPa), attributed to the strategic placement of ramie layers in load‐bearing positions. This configuration also demonstrated superior flexural strength (63.33 MPa) and flexural modulus (2.02 GPa) due to the balanced distribution of stress between the matrix and fibres. Scanning electron microscopy (SEM) images confirmed that alkali treatment improved fibre‐matrix adhesion, reducing defects such as fibre pullout and matrix cracks. The findings highlight that both fibre stacking sequence and alkali treatment play a crucial role in enhancing the mechanical performance of natural fibre composites, making them suitable for applications demanding high strength and durability.


  • Synergistic Enhancement of Poly (Lactic Acid)/Hydroxyapatite Composites With Cissus quadrangularis Fibers: Unveiling Thermal, Mechanical, Invitro Degradation, and Antibacterial Performance for Biomedical Applications

    by Padmanabhan Rengiah Govindarajan, Sivaraj Chinnusamy, Aniket B. Kolekar, Joseph Arockiam Antony

    This study investigates the mechanical, degradation, and antibacterial performance of PLA composites reinforced with 5 Wt% of hydroxyapatite (HA) particles and x‐Cissus quadrangularis (CQ) fibers (x‐5 Wt%, 10 Wt%, and 15Wt%) fabricated via melt extrusion and injection molding. The incorporation of CQ and HA significantly altered the mechanical properties compared to neat PLA. The ultimate tensile strength (UTS) increased by 28.9% for PCH10 (48.11 ± 1.95 MPa) compared to PLA (37.31 ± 2.1 MPa). Similarly, flexural strength (UFS) of PCH10 improved by 24.8% (63.3 ± 1.25 MPa) over PLA (50.73 ± 2.05 MPa). Degradation studies in phosphate‐buffered saline (PBS) revealed weight loss reductions of 60.3% and 73.5% for PCH10 (2.7% ± 0.1%) and PCH15 (1.8% ± 0.1%), respectively, compared to PLA (6.8% ± 0.2%) after 30 days. Antibacterial activity against Staphylococcus aureus demonstrated superior performance, with the inhibition zone of PCH10 and PCH15 increasing by 70% and 150%, respectively, over PLA on Day 2. These enhancements are attributed to the synergistic effects of HA and CQ, which improve mechanical stability, hydrolytic resistance, and antibacterial efficacy. PCH10 emerges as the most promising candidate for biomedical applications, particularly bone scaffolds and orthopedic implants.


  • Mechanical, water absorption, and flammability behavior of coconut shell and jackfruit skin powder-reinforced bio-composites fabricated through fused deposition modeling

    by Reddygari Meenakshi Reddy, Subashini Kasiviswanathan, Akhilesh Kumar Singh, Donti Ratnam Srinivasan, Shubhlakshmi Tiwari, Shilpa Bhimrao Sahare, A. Joseph Arockiam, Surrya Prakash Dillibabu, Rengaiyah Govindarajan Padmanabhan

    This study investigates the development of biodegradable bio-composites made from polylactic acid (PLA) reinforced with farm waste materials, specifically coconut shell powder and jackfruit skin powder. The bio-composite filaments were fabricated using a filament extruder, and the samples were created through fused deposition modeling (FDM). Mechanical strength, water absorption, and flammability were evaluated. The results revealed that incorporating coconut shell (CBC) and jackfruit skin (JBC) powders into the PLA matrix significantly enhanced the mechanical properties, water resistance, and flame retardancy of the composites. The hybrid bio-composite (HBC) showed a 73.7 % improvement in water absorption resistance, with a water absorption rate of 9.06 ± 0.02 %. CBC and JBC demonstrated 70.8 % and 67.2 % reductions in water absorption, respectively, compared to pure PLA. The HBC bio composite also exhibited superior flame retardancy, with a 60.9 % increase in ignition delay (8.43 ± 0.21 s), 30.5 % reduction in flame spread rate (43.21 ± 1.42 mm min−1), and 50.5 % increase in after-flame duration (13.14 ± 1.05 s). In terms of tensile properties, HBC outperformed all other composites with an ultimate tensile strength (UTS) of 59.2 ± 1.8 MPa, representing a 44.2 % improvement compared to pure PLA. The CBC and JBC showed 24.7 % and 10.7 % increases in UTS, respectively. The HBC also showed a 40.2 % improvement in flexural strength, with the lowest deflection at 4.0 ± 0.1 mm, compared to 23 % and 20.8 % improvements for CBC and JBC, respectively.


  • Effects of layering variation on mechanical, thermal, and morphological properties of areca natural fiber mat reinforced epoxy biocomposites

    by Katakam Satyanarayana, Ganesh K Jadhav, D. R. Srinivasan, Manepalli. Sailaja, A. Sunny Kumar, Pathem Uma Chaithanya, R. G. Padmanabhan, A. Joseph Arockiam


  • Development of fish scale particle reinforced PLA filaments for 3D printing applications

    by A. Joseph Arockiam, S. Rajesh, S. Karthikeyan

    This study investigated incorporating fish scale powder (FSP) as a bio‐filler into polylactic acid (PLA) raw material for polymeric 3D printing. The PLA/FSP filaments were evaluated for various properties (tensile strength, tensile modulus, elongation, diameter deviation, thermogravimetric analysis, surface roughness, and SEM analysis) at different compositions (PLA, PLA/FSP10, PLA/FSP20, and PLA/FSP30 wt%). The results revealed that PLA filaments reinforced with 20 wt% FSP achieved the highest tensile strength, and modulus is 44.49 MPa and 2.83 GPa. The filaments reinforced with neat PLA and PLA with 10 wt% fish scale powder exhibited minor diameter deviations of +0.002 and −0.002. The surface roughness of the neat PLA filament is notably higher, registering a value of 1.459 μm. This finding highlights the importance of considering surface characteristics in filament selection for 3D printing applications. The microscopic analysis confirmed a uniform distribution of FSP particles in the 20 wt% composition PLA/FSP filaments. These results suggest that PLA/FSP (20 wt%) is an optimal feedstock for 3D printing, especially in developing biomaterials like bio‐scaffolds.


  • Open Access

    Mechanical and thermal characterization of additive manufactured fish scale powder reinforced PLA biocomposites

    by A Joseph Arockiam, S Rajesh, S Karthikeyan, Senthil Muthu Kumar Thiagamani, R G Padmanabhan, Mohamed Hashem, Hassan Fouad, AbuZar Ansari

    This research work is aimed to convert fish scale wastes as an effective reinforcement in polylactic acid (PLA) as a new bio-composite filament for fused deposition-based 3D printing applications. Various concentrations of fish scale particles (0, 10, 20, and 30%) were used to make the filaments. The performance of the developed filaments was assessed by printing the filament into various test specimens to perform tensile, flexural, impact, hardness, and water absorption experiments as per the ASTM standards. The outcomes of the results show that the PLA/fish scale powder (20%) composite has performed well than the remaining composites. Furthermore, the adding 20% fish scale powder increased the tensile strength and flexural strength of the 3D printed PLA composite by 15% and 39.78% respectively. This is evident that the novel bio-composite exhibited better properties than the pure polymer making it a potential replacement as bone-grafting material and scaffolds for bio-engineering applications.