I. Hoff
Research Subjects
I. Hoff has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- E. Øiseth
SINTEF Building and Infrastructure, Department for Rock and Soil Mechanics, Trondheim, Norway
1 shared publication - I. Horvli
Department of Civil and Transport Engineering, Norwegian University of Science and Technology, NTNU, Høyskoleringen 7A 7491 Trondheim, Norway
1 shared publication - L. Uthus
Department of Civil and Transport Engineering, Norwegian University of Science and Technology, NTNU, Høyskoleringen 7A 7491 Trondheim, Norway
1 shared publication - R. Aabøe1 shared publication
- Åke Hermansson
Swedish National Road and Transport Research Institute, VTI, SE-581 95, Linköping, Sweden
1 shared publication
Latest Publications
- 14 July 2006
- Published by American Society of Civil Engineers (ASCE)
- p. 1-11
Field Test Comparing Frost Insulation Materials in Road Construction
Three products are presently used in Norway as thermal insulation in roads; lightweight clay aggregate (LWCA), foam glass aggregate and extruded polystyrene boards (XPS). As a evaluation on the present design guidelines for frost insulation and in order to compare the different insulation products, a field test is established in connection with the construction of a new main road (E6) south of Trondheim in Norway. The test site has four different sections. In addition to three sections where each of the three different insulation products are used, one additional section contains ordinary pavement materials produced from crushed rock.
- 14 July 2006
- Published by American Society of Civil Engineers (ASCE)
- p. 1-11
Field Test Comparing Frost Insulation Materials in Road Construction
Three products are presently used in Norway as thermal insulation in roads; lightweight clay aggregate (LWCA), foam glass aggregate and extruded polystyrene boards (XPS). As a evaluation on the present design guidelines for frost insulation and in order to compare the different insulation products, a field test is established in connection with the construction of a new main road (E6) south of Trondheim in Norway. The test site has four different sections. In addition to three sections where each of the three different insulation products are used, one additional section contains ordinary pavement materials produced from crushed rock.
- 14 July 2006
- Published by American Society of Civil Engineers (ASCE)
- p. 1-13
A Study on the Influence of Water and Fines on the Deformation Properties and Frost Heave of Unbound Aggregates
Damages caused by frost heave as well as rutting caused by loss of bearing capacity in the spring thaw period are serious problems in most countries that experience frost in the winter time. In order to keep a road network in frost affected areas with minimum total costs for road users and owners, a proper use of materials which serves winter and spring thaw conditions is essential. The choice between extensive utilization of local materials and the use of high quality material, transported a long distance, is an important issue. In this context it is important to avoid severe differential frost heaves, and to keep a high bearing capacity throughout the year. For unbound material, the mineralogy, fines content and permeability are key factors to determine the frost susceptibility. In this project one grading of unbound material from three different rock types was investigated; one relatively weak mica-rich gneiss from Sweden and two typical hard rock types from Norway. The potential for frost heave was investigated by laboratory frost heave tests. Repeated load triaxial testing was used to study the resilient modulus and the permanent deformation properties under influence of different water contents. This investigation improves the knowledge on the behavior of unbound aggregate used in road construction in regions with cold climates.
- 14 July 2006
- Published by American Society of Civil Engineers (ASCE)
- p. 1-13
A Study on the Influence of Water and Fines on the Deformation Properties and Frost Heave of Unbound Aggregates
Damages caused by frost heave as well as rutting caused by loss of bearing capacity in the spring thaw period are serious problems in most countries that experience frost in the winter time. In order to keep a road network in frost affected areas with minimum total costs for road users and owners, a proper use of materials which serves winter and spring thaw conditions is essential. The choice between extensive utilization of local materials and the use of high quality material, transported a long distance, is an important issue. In this context it is important to avoid severe differential frost heaves, and to keep a high bearing capacity throughout the year. For unbound material, the mineralogy, fines content and permeability are key factors to determine the frost susceptibility. In this project one grading of unbound material from three different rock types was investigated; one relatively weak mica-rich gneiss from Sweden and two typical hard rock types from Norway. The potential for frost heave was investigated by laboratory frost heave tests. Repeated load triaxial testing was used to study the resilient modulus and the permanent deformation properties under influence of different water contents. This investigation improves the knowledge on the behavior of unbound aggregate used in road construction in regions with cold climates.