EØE. Øiseth

E. Øiseth

*This is an algorithmically generated author record based on publicly available information.

E. Øiseth has a total of 3 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Field Test Comparing Frost Insulation Materials in Road Construction

    by E. Øiseth, R. Aabøe, I. Hoff

    Three products are presently used in Norway as thermal insulation in roads; lightweight clay aggregate (LWCA), foam glass aggregate and extruded polystyrene boards (XPS). As a evaluation on the present design guidelines for frost insulation and in order to compare the different insulation products, a field test is established in connection with the construction of a new main road (E6) south of Trondheim in Norway. The test site has four different sections. In addition to three sections where each of the three different insulation products are used, one additional section contains ordinary pavement materials produced from crushed rock.


  • Lightweight Aggregates as Frost Insulation in Roads — Design Chart

    by E. Øiseth, G. Refsdal

    Frost heave and thawing, resulting in deformations and reduced bearing capacity, cause major maintenance costs of the roads in the Nordic countries. The most common frost protection method in Norway is to increase the layer thickness of crushed rock. In addition has extruded polystyrene (XPS) been used since 1965, but this has gradually been reduced the last 20 years. Light expanded clay aggregate has regularly been used as frost protection for other civil engineering applications such as railways and buildings, and is occasionally also used for pavements. Lately also foam glass aggregate has become an option. To optimize the design, SINTEF has performed a number of numerical analyses and developed design charts that give the required layer thickness of frost insulation. The numerical analyses showed that the frost protection layer using expanded clay or foam glass aggregate should be 4–5 times thicker than a frost protection of extruded polystyrene.