XGXinxin Guo

Xinxin Guo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xinxin Guo has a total of 5 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Research Progress on the Performance Enhancement Technology of Ice-on-Coil Energy Storage

    by Xinxin Guo, Xiaoyu Xu, Zhixin Wang, Zheshao Chang, Chun Chang

    Ice-on-coil energy storage technology has been widely used in air conditioning systems and industrial refrigeration as an efficient energy storage technology. This paper reviews the research progress of ice-on-coil energy storage technology, including its working principle, system design, key parameter optimization, and practical application challenges and solutions. Three kinds of ice melting systems are introduced. The internal ice melting system has the largest cold storage density and the slowest rate of ice melting. The external ice melting system has the lowest cold storage density and the fastest rate of ice melting. The combined ice melting system can have the highest density of cold storage density and a high rate of ice melting. By comparing the results of different studies, the influence of fin and thin ring application on the heat transfer enhancements of the ice-on-coil storage system is summarized. It is found that the ice storage time can be reduced by 21% and 34% when the annular fin and thin ring are set. Regarding system control, adopting the ice-melting priority strategy increases operating energy consumption, but the economy improves; using the unit priority strategy lowers operating energy consumption, but the economy suffers slightly. When the cooling demand exceeds the cooling capacity of the chiller, an ice melting priority control strategy is more economical. Some suggestions for future research are presented, such as optimizing the shape and arrangement of coil fins and ice storage systems integrated with renewable energy. It provides guidance for the further development of ice storage air conditioning technology.


  • Open Access

    Experimental and Numerical Study of the Ice Storage Process and Material Properties of Ice Storage Coils

    by Xiaoyu Xu, Chun Chang, Xinxin Guo, Mingzhi Zhao

    The coiled ice-storage-based air conditioning system plays a significant role in enhancing grid peak regulation and improving cooling economy. This paper presents theoretical and experimental studies conducted on the ice storage process of coiled ice storage air conditioning technology. The cooling of water is divided into two stages:10.0 °C to 4.0 °C and 4.0 °C to below 0.0 °C. Initially, the ice storage process forms an ice layer with a thickness of 2.50 mm on the lower surface of the coil, but eventually, the ice layer on the upper surface becomes 3.85 mm thicker than the lower surface as a result of the natural convection of water and density reversal at 4.0 °C. Furthermore, the impact of three coils with different thermal conductivity on the ice storage process was evaluated. It was observed that the thermal conductivity of R-HDPE (reinforced high-density polyethylene) was only 2.6 W/(m·K) higher than HDPE (high-density polyethylene), yet it reduced the freezing time by 34.85%, while the thermal conductivity of steel was 37.4 W/(m·K) higher than R-HDPE, but only decreased the freezing time by 9.40%. The results demonstrated that the rate of ice accumulation increased with thermal conductivity. However, when the coil material’s thermal conductivity surpassed that of ice, the further increase of thermal conductivity gradually weakened its impact on the ice storage rate.