Kuruthukulam Chacko Neethu
Research Subjects
Kuruthukulam Chacko Neethu has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Subramaniam Murali
Engineering Section, ICAR - Central Institute of FisheriesTechnology, Kochi, India
8 shared publications - Dhanapaul Selvaraj Aniesrani Delfiya
ICAR‐Central Institute of Fisheries Technology Cochin Kerala India
7 shared publications - George Ninan
ICAR- Central Institute of Fisheries Technology, Willingdon Island, Kerala 682029, India
5 shared publications S. Remya
Engineering Section ICAR‐Central Institute of Fisheries Technology Cochin India
2 shared publicationsAnees K
ICAR-IISR
1 shared publicationAnuja R. Nair
Engineering Division, ICAR-Central Institute of Fisheries Technology, Cochin, India
1 shared publication
Latest Publications
- 16 September 2026
- Published by Taylor & Francis in Drying Technology
- Vol. 44 (15) , 2301-2323
Advances in hybrid solar–infrared drying for food processing: Comparative design, energy performance, and quality evaluation
1. Drying is one of the most widely applied unit operations in food and agricultural processing, enabling shelf-life extension through moisture removal and suppression of microbial, enzymatic, and ...
- 16 September 2026
- Published by Taylor & Francis in Drying Technology
- Vol. 44 (15) , 2301-2323
Advances in hybrid solar–infrared drying for food processing: Comparative design, energy performance, and quality evaluation
1. Drying is one of the most widely applied unit operations in food and agricultural processing, enabling shelf-life extension through moisture removal and suppression of microbial, enzymatic, and ...
- 8 April 2026
- Published by Wiley in Journal of Food Process Engineering
- Vol. 49 (4)
Integration of a Solar Air Heating System in a Continuous Infrared Dryer for Energy‐Efficient Drying
The hybrid infrared‐solar technology ensures energy‐efficient, sustainable, and low‐carbon drying, reduces the operational cost of the drying process, and improves the drying performance of the dryer. The solar flat plate collector provides the hot air supply for the infrared dryer, which measurably reduces the electrical energy demand of the infrared dryer. This study aimed to develop a solar‐assisted continuous infrared dryer that utilizes the hot air generated by the solar flat plate collector. The fish drying using this dryer was conducted at various operating conditions, such as Infrared alone (1500 and 3000 W/m 2 ) and solar‐assisted infrared (1500 and 3000 W/m 2 ). The energy consumption from the electrical source was found to be lower (1.55 kWh) in solar‐assisted infrared with 1500 W/m 2 , and the electrical energy of 61.63% was replaced by solar thermal energy supplied by the SFPC during fish drying. The maximum drying efficiency of 12.27% was observed in solar‐assisted infrared at 1500 W/m 2 , followed by 11.25% solar‐assisted infrared at 3000 W/m 2 . The payback period for fish drying using this dryer was found to be less than 0.64, and the benefit–cost ratio of more than 1.55, except for infrared drying without solar at 1500 W/m 2 . This study shows the successful and efficient combination of solar energy and an infrared energy source for food drying.
- 8 April 2026
- Published by Wiley in Journal of Food Process Engineering
- Vol. 49 (4)
Integration of a Solar Air Heating System in a Continuous Infrared Dryer for Energy‐Efficient Drying
The hybrid infrared‐solar technology ensures energy‐efficient, sustainable, and low‐carbon drying, reduces the operational cost of the drying process, and improves the drying performance of the dryer. The solar flat plate collector provides the hot air supply for the infrared dryer, which measurably reduces the electrical energy demand of the infrared dryer. This study aimed to develop a solar‐assisted continuous infrared dryer that utilizes the hot air generated by the solar flat plate collector. The fish drying using this dryer was conducted at various operating conditions, such as Infrared alone (1500 and 3000 W/m 2 ) and solar‐assisted infrared (1500 and 3000 W/m 2 ). The energy consumption from the electrical source was found to be lower (1.55 kWh) in solar‐assisted infrared with 1500 W/m 2 , and the electrical energy of 61.63% was replaced by solar thermal energy supplied by the SFPC during fish drying. The maximum drying efficiency of 12.27% was observed in solar‐assisted infrared at 1500 W/m 2 , followed by 11.25% solar‐assisted infrared at 3000 W/m 2 . The payback period for fish drying using this dryer was found to be less than 0.64, and the benefit–cost ratio of more than 1.55, except for infrared drying without solar at 1500 W/m 2 . This study shows the successful and efficient combination of solar energy and an infrared energy source for food drying.
- 7 February 2026
- Published by Taylor & Francis in Journal of Aquatic Food Product Technology
- Vol. 35 (2) , 110-135
Effect of Blanching Conditions on the Quality of Infrared-Dried Squid Rings: Sensory-Based Optimization and Semi-Empirical Drying Modeling
- 7 February 2026
- Published by Taylor & Francis in Journal of Aquatic Food Product Technology
- Vol. 35 (2) , 110-135
Effect of Blanching Conditions on the Quality of Infrared-Dried Squid Rings: Sensory-Based Optimization and Semi-Empirical Drying Modeling
- 23 February 2025
- Published by Indian Dairy Association in Indian Journal of Dairy Science
- Vol. 78 (1)
Process optimization and characterization of spice oleoresins infused ice cream for enhancing its functional attributes
Different spice oleoresins, such as black pepper (0.15, 0.20, and 0.25% w/w), ginger (0.10, 0.15, and 0.20% w/w), and turmeric (0.02, 0.05, and 0.07% w/w), were added at specific concentrations to make the spice-flavored functional ice cream. The effects of concentration of oleoresin on the physico-chemical, biochemical, microbiological, and organoleptic attributes of the spice-flavored ice cream was evaluated. Addition of 0.20% black pepper oleoresin obtained the highest overall acceptability score of 8.5, having an overrun of 33.64%, melting rate of 0.85g/min, total solids of 43.86%, fat content of 12.33% and total phenol content of 393.72 mg GAE/ml and ranked first. This was followed by ginger flavoured ice cream with the concentration of 0.15% with overall acceptability score of 7.7, overrun of 30.53%, melting rate of 0.87 g/min, total solids of 43.82%, fat content of 12.53% and total phenol content of 384.57 mg GAE/ml. Among the three spice oleoresins added, turmeric oleoresin at the concentration of 0.05% had the lowest overall acceptability score of 7.3, overrun of 29.63%, melting rate of 0.87g/min, total solids of 48.93%, fat content of 12.66% and total phenol content of 378.47 mg GAE/ml. The addition of oleoresin enhanced the total phenol content in the ice cream which could provide therapeutic benefits to consumers.
- 23 February 2025
- Published by Indian Dairy Association in Indian Journal of Dairy Science
- Vol. 78 (1)
Process optimization and characterization of spice oleoresins infused ice cream for enhancing its functional attributes
Different spice oleoresins, such as black pepper (0.15, 0.20, and 0.25% w/w), ginger (0.10, 0.15, and 0.20% w/w), and turmeric (0.02, 0.05, and 0.07% w/w), were added at specific concentrations to make the spice-flavored functional ice cream. The effects of concentration of oleoresin on the physico-chemical, biochemical, microbiological, and organoleptic attributes of the spice-flavored ice cream was evaluated. Addition of 0.20% black pepper oleoresin obtained the highest overall acceptability score of 8.5, having an overrun of 33.64%, melting rate of 0.85g/min, total solids of 43.86%, fat content of 12.33% and total phenol content of 393.72 mg GAE/ml and ranked first. This was followed by ginger flavoured ice cream with the concentration of 0.15% with overall acceptability score of 7.7, overrun of 30.53%, melting rate of 0.87 g/min, total solids of 43.82%, fat content of 12.53% and total phenol content of 384.57 mg GAE/ml. Among the three spice oleoresins added, turmeric oleoresin at the concentration of 0.05% had the lowest overall acceptability score of 7.3, overrun of 29.63%, melting rate of 0.87g/min, total solids of 48.93%, fat content of 12.66% and total phenol content of 378.47 mg GAE/ml. The addition of oleoresin enhanced the total phenol content in the ice cream which could provide therapeutic benefits to consumers.
- 1 January 2025
- Published by Wiley in Journal of Food Process Engineering
- Vol. 48 (1)
Hot‐Air‐Assisted Infrared Drying for Marinated Anchovy: Effects of Spice Blends on Drying Characteristics and Quality
This study examined the drying characteristics and quality of raw and marinated anchovy using a hot‐air‐assisted pilot‐scale infrared (IR) dryer. Anchovy was marinated with various Indian spice blends and dried for 3 h under controlled conditions. Four marinade formulations were tested: M1 (0.5% salt, 0.25% red chili powder, 0.25% turmeric powder), M2 (1% salt, 0.25% red chili powder, 0.25% turmeric powder), M3 (1% salt, 0.5% red chili powder, 0.5% turmeric powder), and M4 (0.5% salt, 0.5% red chili powder, 0.5% turmeric powder), along with a control. Both marination and drying time significantly affected the final moisture content (p ≤ 0.001). The highest drying rate was observed for M3 (1.442 g/g dry matter/h) and the lowest for raw anchovy (1.389 g/g dry matter/h). Tukey's analysis revealed significant differences in drying rates between M3 and other marinated samples, as well as between raw and certain marinated samples, highlighting the effect of marination on drying efficiency. The diffusion approach model worked best with M3 anchovy. Effective moisture diffusivity values ranged from 7.003 × 10−9 to 8.913 × 10−9 m2/s, with a highest value reported for M3. The results signify the opportunities to improve the hot‐air‐assisted infrared (IR‐HA) drying process and potentially reduce drying time and certainly energy usage. The findings emphasize that spice blends influence both drying characteristics and sensory attributes, offering valuable insights for refining marination strategies to enhance flavor, consistency, and product quality. Marinating before drying is recommended as a method to add the value to anchovy. The economic analysis revealed that the payback period for the IR‐HA dryer when used to dry marinated anchovy is 0.88 years.
- 1 January 2025
- Published by Wiley in Journal of Food Process Engineering
- Vol. 48 (1)
Hot‐Air‐Assisted Infrared Drying for Marinated Anchovy: Effects of Spice Blends on Drying Characteristics and Quality
This study examined the drying characteristics and quality of raw and marinated anchovy using a hot‐air‐assisted pilot‐scale infrared (IR) dryer. Anchovy was marinated with various Indian spice blends and dried for 3 h under controlled conditions. Four marinade formulations were tested: M1 (0.5% salt, 0.25% red chili powder, 0.25% turmeric powder), M2 (1% salt, 0.25% red chili powder, 0.25% turmeric powder), M3 (1% salt, 0.5% red chili powder, 0.5% turmeric powder), and M4 (0.5% salt, 0.5% red chili powder, 0.5% turmeric powder), along with a control. Both marination and drying time significantly affected the final moisture content (p ≤ 0.001). The highest drying rate was observed for M3 (1.442 g/g dry matter/h) and the lowest for raw anchovy (1.389 g/g dry matter/h). Tukey's analysis revealed significant differences in drying rates between M3 and other marinated samples, as well as between raw and certain marinated samples, highlighting the effect of marination on drying efficiency. The diffusion approach model worked best with M3 anchovy. Effective moisture diffusivity values ranged from 7.003 × 10−9 to 8.913 × 10−9 m2/s, with a highest value reported for M3. The results signify the opportunities to improve the hot‐air‐assisted infrared (IR‐HA) drying process and potentially reduce drying time and certainly energy usage. The findings emphasize that spice blends influence both drying characteristics and sensory attributes, offering valuable insights for refining marination strategies to enhance flavor, consistency, and product quality. Marinating before drying is recommended as a method to add the value to anchovy. The economic analysis revealed that the payback period for the IR‐HA dryer when used to dry marinated anchovy is 0.88 years.
- 19 November 2024
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 31 (56) , 64884-64902
Solar dryer with double pass flat plate solar collector and carbon nanodots-coated absorber surface
The present study details the development of a solar dryer with double pass flat plate solar collector having carbon nanodots (CNDs) coated absorber surface. Among the various concentrations of CNDs (0.1, 0.2, 0.5, 1, and 2%), the 0.5% CNDs coated absorber surface recorded the highest absorptance and lowest reflectance with higher spectral selectivity of 0.933. Hence, the 0.5% coating was selected as the optimum concentration and coated over the absorber surface of flat plate solar air collector. SEM image of black painted surface is clear and smooth and CNDs coated absorber surface is having dispersed particle with rough surface. FTIR absorption peak values revealed that the presence of black paint and CNDs in the 0.5% CNDs coated aluminium sheet. The efficiency of collector coated with 0.5% CNDs was calculated at various air flow rate of 0.008, 0.016, 0.018, and 0.021 kg/s and results revealed that the rise in air flow rate from 0.008 to 0.021 kg/s increased the efficiency from 39.22 to 82.99%. The solar dryer connected with the developed collector was tested for the performance and the drying studies revealed that shrimp and false white sardine required 10 h and 11 h drying time during the experimental studies.
- 19 November 2024
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 31 (56) , 64884-64902
Solar dryer with double pass flat plate solar collector and carbon nanodots-coated absorber surface
The present study details the development of a solar dryer with double pass flat plate solar collector having carbon nanodots (CNDs) coated absorber surface. Among the various concentrations of CNDs (0.1, 0.2, 0.5, 1, and 2%), the 0.5% CNDs coated absorber surface recorded the highest absorptance and lowest reflectance with higher spectral selectivity of 0.933. Hence, the 0.5% coating was selected as the optimum concentration and coated over the absorber surface of flat plate solar air collector. SEM image of black painted surface is clear and smooth and CNDs coated absorber surface is having dispersed particle with rough surface. FTIR absorption peak values revealed that the presence of black paint and CNDs in the 0.5% CNDs coated aluminium sheet. The efficiency of collector coated with 0.5% CNDs was calculated at various air flow rate of 0.008, 0.016, 0.018, and 0.021 kg/s and results revealed that the rise in air flow rate from 0.008 to 0.021 kg/s increased the efficiency from 39.22 to 82.99%. The solar dryer connected with the developed collector was tested for the performance and the drying studies revealed that shrimp and false white sardine required 10 h and 11 h drying time during the experimental studies.
- 19 June 2024
- Published by Springer Nature in Journal of Food Science and Technology
- Vol. 62 (1) , 155-166
Exploring oil absorption and distribution in immersion-fried pantoa (Indian dairy dessert): effects of frying media
The kinetics, oil migration pattern and the role of frying media during immersion frying of ‘pantoa’, a dairy dessert, at the microstructural level were studied using confocal laser scanning microscopy (CLSM). After 6 min of frying, the depth of oil migration in pantoa increased from 0 to 3.16 mm in clarified butter (locally called ‘ghee’) and 3.81 mm in sunflower oil. Migration was 1.6 times higher and 1.25 times deeper in pantoa fried in sunflower oil than in clarified butter because of higher moisture loss and pore development. The near absence of fluorescence in the CLSM images of pantoa core evidenced that oil did not penetrate the core. Moisture loss and oil migration (fat uptake) were strongly correlated (r = 0.99). CLSM and optical scan images established that oil migrated into pantoa only at the end of frying. Thus, frying of pantoa in clarified butter would be better in terms of minimizing fat migration. The extent and depth of oil migration in the crust and core of pantoa in sunflower oil and clarified butter have been mapped, quantified and compared. This study helps to instantiate the oil/fat migration process in complex and dense fried foods. Also, it will be relevant for the food industry in terms of optimizing the fat content of fried products, thereby avoiding excess oil and produce healthy foods of desired quality.
- 19 June 2024
- Published by Springer Nature in Journal of Food Science and Technology
- Vol. 62 (1) , 155-166
Exploring oil absorption and distribution in immersion-fried pantoa (Indian dairy dessert): effects of frying media
The kinetics, oil migration pattern and the role of frying media during immersion frying of ‘pantoa’, a dairy dessert, at the microstructural level were studied using confocal laser scanning microscopy (CLSM). After 6 min of frying, the depth of oil migration in pantoa increased from 0 to 3.16 mm in clarified butter (locally called ‘ghee’) and 3.81 mm in sunflower oil. Migration was 1.6 times higher and 1.25 times deeper in pantoa fried in sunflower oil than in clarified butter because of higher moisture loss and pore development. The near absence of fluorescence in the CLSM images of pantoa core evidenced that oil did not penetrate the core. Moisture loss and oil migration (fat uptake) were strongly correlated (r = 0.99). CLSM and optical scan images established that oil migrated into pantoa only at the end of frying. Thus, frying of pantoa in clarified butter would be better in terms of minimizing fat migration. The extent and depth of oil migration in the crust and core of pantoa in sunflower oil and clarified butter have been mapped, quantified and compared. This study helps to instantiate the oil/fat migration process in complex and dense fried foods. Also, it will be relevant for the food industry in terms of optimizing the fat content of fried products, thereby avoiding excess oil and produce healthy foods of desired quality.
- 27 May 2024
- Published by Taylor & Francis in Journal of Aquatic Food Product Technology
- Vol. 33 (5) , 343-360
Response Surface Optimization of Steam Blanching Conditions of Shrimp ( Metapenaeus dobsoni ) for Drying in Solar-Electrical Hybrid Dryer
- 27 May 2024
- Published by Taylor & Francis in Journal of Aquatic Food Product Technology
- Vol. 33 (5) , 343-360
Response Surface Optimization of Steam Blanching Conditions of Shrimp ( Metapenaeus dobsoni ) for Drying in Solar-Electrical Hybrid Dryer
- 4 May 2024
- Published by Springer Nature in Journal of Food Science and Technology
- Vol. 61 (11) , 2121-2132
Optimization of vacuum impregnated nutmeg rind candy using RSM modeling: effect on functional and nutritional properties
Vacuum impregnation (VI) stands as an innovative technique, used to create novel food formulations by impregnating vital nutritive compounds into natural food matrices. Process variables were syrup temperature ranging from (50 to 70 °C), syrup concentration (60° to 80° Brix), and VI duration (10 to 20 min). The optimal conditions emerged at 66.81 °C for syrup temperature, 71.58° Brix for syrup concentration, and a precise 11.59 min for the VI duration. At these paramount conditions, the candy exhibited striking attributes such as 50.0% water loss, 12.23% sugar gain, chewiness of 9 N, and lightness value of 22.17. The predicted values using the developed model were validated with experimental data and indicated the adequacy of the generated model. The functional characterization of the optimized nutmeg rind candy showcased a marked reduction in myristicin content, signifying an augmented level of safety for consumption. Furthermore in-vitro anti-bacterial assay, total phenolics, flavonoids and tannin content, anti-oxidant potential, proximate composition and microstructure of the optimized candy were analysed.
- 4 May 2024
- Published by Springer Nature in Journal of Food Science and Technology
- Vol. 61 (11) , 2121-2132
Optimization of vacuum impregnated nutmeg rind candy using RSM modeling: effect on functional and nutritional properties
Vacuum impregnation (VI) stands as an innovative technique, used to create novel food formulations by impregnating vital nutritive compounds into natural food matrices. Process variables were syrup temperature ranging from (50 to 70 °C), syrup concentration (60° to 80° Brix), and VI duration (10 to 20 min). The optimal conditions emerged at 66.81 °C for syrup temperature, 71.58° Brix for syrup concentration, and a precise 11.59 min for the VI duration. At these paramount conditions, the candy exhibited striking attributes such as 50.0% water loss, 12.23% sugar gain, chewiness of 9 N, and lightness value of 22.17. The predicted values using the developed model were validated with experimental data and indicated the adequacy of the generated model. The functional characterization of the optimized nutmeg rind candy showcased a marked reduction in myristicin content, signifying an augmented level of safety for consumption. Furthermore in-vitro anti-bacterial assay, total phenolics, flavonoids and tannin content, anti-oxidant potential, proximate composition and microstructure of the optimized candy were analysed.